flanges used for sale

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Max. grinding length: 450 mm Max. clamping length: 1055 mm Max. work piece diameter: 250 mm Thread diameter: min.: 2 mm max: 250 mm Workpiece spindle bore: 45 mm Workpiece weight on centres max.: 200 kg Thread pitch: min.: 0.3 mm max: 100 mm Max. angle pitch +: 40 ° Max. angle pitch -: 40 ° max. module: 10 Grinding wheels: Diameter: min.: 280 mm max: 350 mm Width: min.: 3.5 mm max: 40 mm Bore: 40 mm Grinding-wheel speeds: number (steps): 6 from: 1700 rpm up to: 2540 rpm Work-piece spindle head speed: number (steps): 27 from: 0.4 rpm up to: 160 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 4.4 kW Total power required: 15 kVA Machine´s weight about: 4700 kg Overall dimensions machine: Length: 3300 mm Width: 1930 mm Height: 1800 mm Various accessories: Coolant syst ...

Clamping length up to 610 mm, grinding length 600 mm, Peak height 100th diameter grinding wheel 350 mm, on request also 400mm possible, bore 127 mm, Hydraulic delivery for piercing and longitudinal grinding. Workpiece spindle stick with infinitely adjustable speed of 65-500. Swivel workpiece spindle stick and grinding spindle stick. 3 grinding wheel flanges. (more available) Revision of the machine according to DIN 8630 (new machine standard). Disassembly of the machine and cleaning of the individual parts. Grinding spindle, - workpiece spindle bearings, tailstock guides check and rework, overgrind the table and cross slide, Adjustment of workpiece spindle stick and tailstock. New electrical components and wiring. Frequency inverters for grinding wheel, Repainting of the machine in RAL 7035 light grey. Complete assembly of the machine, function control.

Storage tanks/ steel tanks/ extinguishing water tanks/ water cisterns pressureless, standing Content: 30,000 litres Available: 4 pieces UNI-OFF-FOR B. No. 20-137 GL internal epoxy resin-coated steel containers (wine tanks) Dimensions: Diameter approx. 3,000 mm Zyl. Height approx. 3,820 mm Total height with feet approx. 5,000 mm Containers with curved floors Wall thicknesses: sheath 9 mm, floors 10 mm on top floor in the middle: 1 block flange DN 50 on the coat: 1 manhole 450 x 350 swivel 1 flange trim NW 40 2 Block flanges NW 20 in the middle of the underbody: 1 block flange DN 65 otherwise according to sketch + photos

M 1105-02800 Machine type Cylindrical Grinding Machine - Universal Make ZIERSCH & BALTRUSCH Type URS 751 Built in 1982 Control type conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base from stock Technical details Grinding diameter 270 mm Grinding length 1000 mm Tip height 135 mm Total power requirement 7.5 kW Machine weight approx. 2.8 t Room requirement approx. 3 X 2.7 X 2.5 m Information ZIERSCH & BALTRUSCH Hydraulic Universal ROUND SCHLEIFMASCHINR Type URS 751 1982 built _________________________________________________ Tip height 135 mm Tip width/grinding length 1000 mm Tip width approx. 1100 mm Grinding wheel size: Through. x Width 400 x 50 mm Grinding spindle speeds (belts) 1,800 2,200 rpm Delivery path/rapid path 0.001 / 30 mm Grinding wheels delivery 0.0 ...

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Operating hours: 39970 Technical data Centre height: 175 mm Distance between centres: 650 mm Grinding wheel right and left hand Max. Longitudinal travel: 700 mm Grinding weehl left side: Diameter: 400 mm Width: 80 mm Bore: 127 mm grinding wheel width: 80 mm Grinding wheel right side: Diameter: 400 mm Width: 40 mm Bore: 127 mm Workpiece weight on centres max.: 130 kg Grinding wheel speeds: number (steps): 6 from: 1500 rpm up to: 2400 rpm Peripheral speed: 35 m/s Hydraulic cross travel: 300 mm Angular displacement: 180 ° Work piece spindle head: speeds: stepless from: 60 rpm up to: 600 rpm rotatable: 0-90 ° Spindle taper:: 5 MT Taper in tailstock:: 3 MT Table angular displacement: 12 ° Table speed: from: 0.05 m/min up to: 9.0 m/min Voltage 50 Hz 3x: 400 Volt External Grinding wheel motor ...

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 100 mm Distance between centres: 400 mm Max. Longitudinal travel: 420 mm Grinding wheel: Diameter: 350 mm Width: 50 mm grinding wheel width: 50 mm Table load max.: 20 kg Workpiece weight on centres max.: 20 kg Grinding wheel speeds: Peripheral speed: 30 m/s Angular displacement: 15 / 30 ° Work piece spindle head: speeds: stepless from: 30 rpm up to: 1200 rpm Spindle taper:: 4 MT Table angular displacement: 30 ° Table speed: stepless from: 100 mm/min up to: 3500 mm/min Voltage 50 Hz 3x: 380 Volt External Grinding wheel motor: 3 kW Total power required: 10 kVA Machine´s weight about: 1600 kg Overall dimensions machine: Length: 1500 mm Width: 1400 mm Height: 1400 mm Various accessories: Set of flanges Safety device

We supply round and flange ring shears (circular shears) in two sizes - 3/1300 and 5/1800 Our KS circular shears are PLC - controlled hydraulic - electromechanical machines designed for the production of rounds and flanges made of steel sheet, VA stainless steel sheet, Aluminium and non-ferrous metal sheet, maximum shearing performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 3 mm or 0.5 mm to 5 mm, smallest / largest cutable circular board 150 mm / 1,300 mm or 1,800 mm respectively – cutting speed up to 35 m/min, drive power 5 kW or 7.5 kW, weight approx. 2,000 kg and 3,000 kg

PLC - controlled round and flange ring shears (circular scissors) This can also be expanded into a combined circular scissors - flange machine. We supply the machine in semi-automatic design and as a fully automated production island. Rounds and flanges (sheet rings) made of steel sheet, VA stainless steel sheet, aluminium and non-ferrous metal sheet can be cut, maximum shear performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 12 mm, smallest / largest cutable circular board 500 mm to 2,200 mm – cutting speed up to 25 m/min, drive power 15 kW, weight of the base machine

VA stainless steel tank approx. 4000L with frame frame used Pressure tank filter tank suction air filter dust filter Tank height total approx. 2600 mm - of which approx. 700 mm funnel Tank diameter approx. 1600 mm Volume approx. 4000 litres Connection openings approx. 300 mm Connection flanges approx. 445 mm Flap on the side approx. 800 x 500 mm with lattice insert/dust grate in the inner bottom and top with bracket for dust filter very stable design Total L/W frame approx. 3100 x 2130 mm Total height approx. 3600 mm Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

grinding length: 1000 mm grinding width: 600 mm workpiece height: 450 mm Control: Fanuc 210i - M total power requirement: 20 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3950 x 3150 x 2550 mm CNC surface grinding machine Clamping area of the table 1000 x 500 mm Clamping surface for magnetic particle board 1000 x 500 mm Largest grinding surface: L x W x H 1000 x 600 x 450 mm Largest distance from table to spindle center 650 mm Table speed in the longitudinal direction 1 - 30 m / min Max. Table load 1500 kg Grinding wheel: diameter x width x bore 400 x 50 x Ø 127 mm Grinding spindle drive 7.5 kW Spindle speed 1500 rpm Connected load 20 kW Space required L x W x H 3950 x 3150 x 2550 mm Weight 5500 kg Equipment CNC control Fanuc 210i - M Electro magnetic plate 1000 x 500 mm Coolant device with paper filter Several Grinding wheels with flanges Digital display Condition  ...

workpiece length: 2700 mm swing dia.: 630 mm clamping length: 2700 mm stroke position adjustment: 40-130 mm grinding wheel diameter: 1000 mm total power requirement: kW weight of the machine ca.: 18,5 t dimensions of the machine ca.: 9x4 m cyclic control CNC / Simatic S7-300 steady rest hydraulic pre-positioning manual fine tuning (Vertical u. Horizontal) grinding wheel flanges rough turning fixture Radial- and side turning fixtures manual Radius turning fixture filtering system Polo inclined bed filter SB-A0.4 manufactured in 2012 grinding wheels storage system for 8 grinding wheels diverse machine tools steady rest jaws diverse irrigation nozzle (workpiece cooling) washer cover with edge lavage Indexierledges for quick workpiece slide position lifting device for grinding wheels manipulation diverse spare parts sliding cover left and right diving plate and clampinserts The data for t ...

thread dia.: 250 mm grinding length: 500 mm thread pitch: - mm tread diameter: 2 mm clamping length - spindle head right: 900 mm spindle bore: 66 mm clamping length - spindle head left: 1020 mm workpiece weight: 200 kg pitch: 0,8 - 288 mm pitch angle: +/- 40 ° workpiece turning speeds: 0,4 - 50 U/min grinding wheel width: 8/13/16/20/30 mm table feed: 1500 mm/min grinding spindle speed: 1900-2450 U/min no. of feed: 12 max. thread profile: 12,5 Modul number of starts: 1 - 8 dia. of hole: 160 mm grinding wheel diam. min/max.: 275 / 350 mm grinding motor: 16 kW electrics - voltage/frequency: 3 x 380 / 50 V/Hz total power requirement: ca. 20 / 45 kW / KVA weight of the machine ca.: 4,6 t dimensions of the machine ca.: 5,7 x 4,7 x 2,6 m profiling device CNC: CNC controlled Thread & Worm Grinding Machine equipped with: - CNC control Grossenbacher AG / Reishauer modell FMS 6 - CNC profiling de ...

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 150 mm Distance between centres: 680 mm Grinding wheel right and left hand Max. Longitudinal travel: 620 mm Grinding wheel: Grinding weehl left side: Diameter: 350 mm Width: 50 mm Bore: 127 mm Grinding wheel right side: Diameter: 250 mm Width: 25 mm Bore: 127 mm Grinding wheel speeds: number (steps): 3 from: 1640 rpm up to: 2300 rpm Hydraulic cross travel: 0/1.2 mm Angular displacement: -45/+90 ° Work piece spindle head: speeds: stepless from: 65 rpm up to: 500 rpm rotatable: 360 ° Spindle taper:: 4 MT Taper in tailstock:: 3 MT Table angular displacement: +/-8 ° Table speed: stepless from: 0 m/min up to: 5 m/min Mini. auto. longitudinal travel: 0.001 mm Voltage 50 Hz 3x: 400 Volt External Grinding wheel motor: 3 kW Machine´s weight about: 2600 kg Overall  ...

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 100 mm Distance between centres: 400 mm Grinding wheel: Diameter: 300 mm Width: 50 mm Bore: 127.0 mm grinding wheel width: 60 mm Grinding wheel speeds: number (steps): 3 from: 1500 rpm up to: 1900 rpm Work piece spindle head: speeds: stepless from: 65 rpm up to: 500 rpm rotatable: 360 ° Spindle hole: 23 mm Spindle taper:: 4 MT Taper in tailstock:: 3 MT Table angular displacement: 9 ° Table speed: stepless up to: 5.0 m/min Voltage 50 Hz 3x: 380 Volt External Grinding wheel motor: 2.5 HP Workhead spindle motor: 0.5 HP Total power required: 4.0 HP Machine´s weight about: 2100 kg Overall dimensions machine: Length: 1600 mm Width: 1200 mm Height: 1550 mm Various accessories: 3-jaw chuck diameter: 135 mm Macnetic chuck diameter: 150 mm Coolant system Paper filte ...

grinding height: 50 mm grinding width: 120 mm grinding wheel diameter: 600 mm total power requirement: 85 kW weight of the machine ca.: 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _______________________________________________________ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grin ...

grinding length: 750 mm grinding width: 500 mm workpiece height: 500 mm total power requirement: 50 kW weight of the machine ca.: 5000 t Grinding length, max. 750 mm Grinding width, max. 500 mm Cross movement of grinding slide 450 mm Working height under grinding wheel, max. 500 mm Grinding wheel size Æ 400 x 100 mm Grinding wheel speeds, infinitely variable 300-3,000 rpm Table speed, hydr. 0 - 30 m/min Table speed, creep feed 0.02 - 1,000 mm/min Vertical infeed, infinitely variable 0.002 - 0.03 mm/stroke Grinding spindle drive, max. 32 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Weight approx. 5,000 kg Accessories / Special Features Creep feed: Electro-mechanical feed (but also hydraulic table movement), with digital display, programable by cam limit switches. Infinit ...

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Grinding wheel diameter: 0 mm Grinding wheel width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. grinding diameter: 0.5 mm Max. grinding diameter: 30 mm Max. workpiece length for infeed grinding: 0.5 - 40 mm Grinding wheel: diameter new wheel: 400 mm Width: 125 mm Bore: 203.2 mm Speeds: number (steps): 2 from: 850 rpm up to: 1700 rpm Peripheral speed: 16 / 32 m/s Regulating spindle: diameter new wheel: 225 mm Width: 125 mm Bore: 80 mm Speeds: stepless from: 0 rpm up to: 120 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 2500 mm Width: 2000 mm Height: 1800 mm Various accessories: Touch screen Coolant system Set of flanges Wheel trueing attachment Full splash cabin

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Grinding wheel diameter: 0 mm Grinding wheel width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. grinding diameter: 1.5 mm Max. grinding diameter: 100 mm Width of the grinding wheel: 200 mm Max. workpiece length for infeed grinding: 200 mm Grinding wheel: diameter new wheel: 406 mm Width: 200 mm Bore: 203 mm Regulating spindle: diameter new wheel: 270 mm Width: 200 mm Bore: 140 mm Speeds: stepless from: 10 rpm up to: 250 rpm Voltage 50 Hz 3x: 380 Volt Main motor: 15 kW Machine´s weight about: 4200 kg Overall dimensions machine: Length: 2020 mm Width: 1300 mm Height: 1420 mm Various accessories: Touch screen Set of flanges Grinding wheel Vibrating / oscillating conveyor Full splash cabin

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 0 Technical data Min. internal grinding diameter: 0.5 mm Max. internal grinding diameter: 20 mm Grinding depth: 100 mm Centre height: 60 mm Distance between centres: 150 mm Workpiece spindle speeds: number (steps): 3 from: 560 rpm up to: 1000 rpm Spindle hole: 12 mm Taper in spindle:: 12 W Grinding spindle speeds: from: 90000 rpm up to: 120000 rpm Rotatable grinding spindle head (b-axis): + 45 / - 45 ° Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 250 kg Overall dimensions machine: Length: 900 mm Width: 750 mm Height: 1300 mm Various accessories: Automatic internal grinding support: AMI 25 Set of flanges Set of collets: W 12 Lamp Air spindle Set of service tools

grinding length: 500 mm grinding width: 200 mm workpiece height: 250 mm total power requirement: 5,5 kW weight of the machine ca.: 2500 kg dimensions of the machine ca.: m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _________________________________________________ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 ...

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 175 mm Distance between centres: 1000 mm Grinding wheel: Diameter: 400 mm Width: 50 mm Bore: 127.0 mm grinding wheel width: 80 mm Grinding wheel speeds: number (steps): 4 from: 1450 rpm up to: 2300 rpm Angular displacement: 90 ° Work piece spindle head: speeds: stepless from: 30 rpm up to: 600 rpm rotatable: 90 ° Spindle taper:: 5 MT Taper in tailstock:: 3 MT Table angular displacement: 10 ° Table speed: stepless from: 0.10 m/min up to: 6.0 m/min Voltage 50 Hz 3x: 380 Volt External Grinding wheel motor: 4.0 HP Machine´s weight about: 2200 kg Overall dimensions machine: Length: 2500 mm Width: 1300 mm Height: 1400 mm Various accessories: Tailstock with fine adjustement Internal grinding attachment Measuring instrument: MARPOSS Coolant system Set of grinding ...

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 91 mm Distance between centres: 305 mm Table length: 625 mm Table width: 114 mm Max. grinding diameter: 225 mm Grinding-wheel diameter: 150 x 19 x 32 mm Longitudinal way of table: 350 mm Transversal way of the table: 130 mm Table swivels: 2 x 90 ° Slewing range of grinding head: horizontal: 270 ° vertical: 270 ° Grinding spindle speeds: number (steps): 7 from: 2000 rpm up to: 15000 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 0.9 kW Machine´s weight about: 700 kg Overall dimensions machine: Length: 1400 mm Width: 1000 mm Height: 1400 mm Various accessories: Set of flanges Set of grinding wheel arbors Dividing attachment Dividing attachment driven Dividing plates Tailstock Set of grinding wheels Set of centers Lamp Tool cabinet Vice rotatable Vic ...

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 450 mm Table width: 180 mm Execution: hydraulic Max. distance from table to spindle-centreline: 400 mm Longitudinal travel (X-axis): 550 mm Transversal travel (y axis): 200 mm Table speeds: stepless from: 0.10 m/min up to: 30.0 m/min Automatic vertical feed: Diameter of grinding wheel: 200 mm Width of the grinding wheel: 25 mm Grinding wheel speeds: from: 2800 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 3.00 HP Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1800 mm Width: 1600 mm Height: 1800 mm Various accessories: Coolant system Electrical magnetic chuck Length: 450 mm Width: 200 mm Wheel truieng attachment hydraulic Dust extraction Digital readout number of axis:: ELESTA (1 x trans.) Set of flanges

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Min. grinding diameter: 5 mm Max. grinding diameter: 300 mm Max. grinding depth: 250 mm Max.workpiece length + steady: 1400 mm Axial motion: Longitudinal travel (Z-axis): 600 mm Work piece spindle head: speeds: from: 0 rpm up to: 1000 rpm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 3400 kg Overall dimensions machine: Length: 4350 mm Width: 1820 mm Height: 1860 mm Various accessories: Wheel trueing attachment Front grinding device redresser Coolant system Set of flanges for internal grinding Lamp Frontal grinding device Steady 3-jaw chuck diameter: (2x) 250 / 200 mm Internal grinding spindle:: ELECTRO number: 4 max. speed: VMS 40-5 40000 rpm max. speed: VMS 60-5 60000 rpm max. speed: VMS 15-5 15 ...

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Technical data Centre height: 180 mm Distance between centres: 650 mm Max. work piece diameter: 360 mm Grinding weehl left side: Diameter: 400 mm Width: 100 mm Bore: 127 mm Grinding wheel right side: Diameter: 250 mm Width: 32 mm Bore: 76.2 mm Workpiece weight on centres max.: 2500 kg Grinding spindle head: Peripheral speed: 35 m/s Work piece spindle head: stepless from: 30 rpm up to: 450 rpm Swivelling range: 0 - 90 ° Taper in tailstock:: 4 MT Spindle stroke: 45 mm Spindle diameter: 50 mm Shearing force: 0.1 - 0.8 kN Table angular displacement: 12.5 ° Table speed: stepless from: 0 m/min up to: 4 m/min Voltage 50 Hz 3x: 380 Volt Air connect: 4 bar External Grinding wheel motor: 5.5 kW Workpiece spindle motor: 0.55 kW Total power required: 10 kW Overall dimensions machine: Length: 3600 m ...

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 650 mm Table width: 300 mm Grinding length: 600 mm Min. grinding length: 300 mm Table load max.: 420 kg Longitudinal travel (X-axis): 750 mm Cross travel (z-axis): 340 mm Transversal travel (y axis): 360 mm Table speeds: stepless from: 0.3 m/min up to: 25 m/min Grinding wheel speeds fix: 1500 rpm Diameter of grinding wheel: 355 mm Width of the grinding wheel: 38 mm Drilling cap. of grind.wheel: 127 mm Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 3.7 kW Total power required: 10.8 kVA Machine´s weight about: 2500 kg Overall dimensions machine: Length: 2740 mm Width: 2100 mm Height: 1800 mm Various accessories: Coolant system Paper filter facility Electrical magnetic chuck Length: 600 mm Width: 300 mm Vice: width: 125 mm Lamp Set of grindi ...

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Control: KELCO 90 Technical data Centre height: 225 / 305 mm Distance between centres: 1000 mm Travels: Z axis: 1160 mm X axis: 350 mm Workpiece weight on centres max.: 200 kg Diameter: 449 mm Grinding weehl left side: Diameter: 500 mm Width: 80 mm Bore: 203 mm Grinding wheel right side: Diameter: 400 mm Width: 40 mm Bore: 127 mm B axis swivelling range: +30 / -190 ° Grinding wheel speeds: up to: 1720 rpm Peripheral speed: 45 m/s Rotatable grinding spindle head (b-axis): 270 ° Work piece spindle head: speeds: stepless from: 5 rpm up to: 500 rpm rotatable: -10 / +100 ° taper in spindle: MT: 5 Tailstock: con regolazione micrometrica Taper in tailstock:: 4 MT Tailstock travel of barrel: 50 mm Feeds: X axis: 8 m/min Resolution: 0.1 µm Z axis: 16 m/min Resolution: 0.2 µm Max. table angular di ...

Workpiece width maximum: 0 mm Workpiece length: 0 mm Grinding machine type: 0   CNC Brand: 0 CNC Model: 0 Control: ELB STC touch screen Operating hours: 1000 Technical data Table length: 1360 mm Table width: 590 mm Axial motion: Longitudinal travel (X-axis): 1100 mm Cross travel (z-axis): 560 mm vertical travel (Y-axis) Table load max.: 1000 kg Grinding length: 1000 mm Grinding width: 600 mm Grinding height over table: 640 mm Grinding wheel: Diameter: 400 mm Width: 100 mm Bore: 127 mm Grinding wheel speeds: stepless from: 1000 rpm up to: 3000 rpm Table speeds: stepless from: 2 m/min up to: 30 m/min Automatic cross feed: from: 0.001 mm/min up to: 2000 mm/min Automatic vertical feed: from: 0.001 mm/min up to: 1500 mm/min Vertical rapid traverse: 0.6 m/min Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 15 kW Machine´s weight about: 6300 kg Various accessories: Paper filter facil ...

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Max. internal grinding diameter: 20 mm Centre height: 60 mm Distance between centres: 150 mm Workpiece spindle speeds: number (steps): 3 from: 560 rpm up to: 1000 rpm Spindle hole: 12 mm Taper in spindle:: 12 W Possible grinding-spindle speeds: from: 6000 rpm up to: 9000 rpm Rotatable grinding spindle head (b-axis): +45 / -45 ° Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 250 kg Overall dimensions machine: Length: 900 mm Width: 750 mm Height: 1300 mm Various accessories: 3-jaw chuck diameter Horizontal grinding spindle support Set of flanges Set of collets: W 12 Steady External grinding spindle

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 580 mm Table width: 200 mm Grinding length: 500 mm Grinding width: 200 mm Grinding height: 300 mm Execution: hydraulic Longitudinal travel (X-axis): 500 mm Transversal travel (y axis): 180 mm Automatic cross-feed: stepless up to: 9.00 m/min Table speeds: stepless up to: 21.0 m/min Creep feed:: Blockierung Quer (Y) Vertical rapid traverse Diameter of grinding wheel: 225 mm Width of the grinding wheel: 25 mm Grinding wheel speeds: from: 2700 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1500 mm Various accessories: Paper filter facility Electrical magnetic chuck: WALKER Length: 500 mm Width: 200 mm Wheel trueing attachment Lamp Set o ...

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Grinding-wheel diameter: 75 mm Vertical adjustment of grinding head: 100 mm Table swivels: 60 ° Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 0.3 HP Machine´s weight about: 140 kg Overall dimensions machine: Length: 600 mm Width: 475 mm Height: 1500 mm Various accessories: Set of flanges Coolant system Lamp Radius grinding device

Technical data Table length: 400 mm Table width: 200 mm Grinding length: 400 mm Grinding width: 200 mm Execution: hydraulic Max. distance from table to spindle-centreline: 400 mm Longitudinal travel (X-axis): 400 mm Transversal travel (y axis): 200 mm Vertical travel (z axis): 300 mm Table speeds: stepless from: 1 m/min up to: 25 m/min Diameter of grinding wheel: 250 mm Width of the grinding wheel: 25 mm Grinding wheel speeds: number (steps): 2 from: 1300 rpm up to: 2600 rpm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 1250 kg Overall dimensions machine: Length: 1900 mm Width: 1300 mm Height: 2000 mm Various accessories: Coolant system Electrical magnetic chuck Length: 450 mm Width: 200 mm Wheel trueing attachment Set of flanges Central lubrification Automatic forward feed Automatic feed

Technical data Centre height: 125 mm Distance between centres: 1000 mm Grinding wheel: Diameter: 500 mm Width: 60 mm Bore: 203.0 mm grinding wheel width: 80 mm Grinding wheel speeds: number (steps): 2 from: 1350 rpm up to: 1500 rpm Angular displacement: 180 ° Work piece spindle head: speeds: stepless from: 20 rpm up to: 400 rpm Table angular displacement: 9 ° Table speed: stepless up to: 6.0 m/min Voltage 50 Hz 3x: 380 Volt External Grinding wheel motor: 6.0 HP Total power required: 7.0 HP Machine´s weight about: 2700 kg Overall dimensions machine: Length: 2600 mm Width: 1500 mm Height: 1750 mm Various accessories: Measuring control Wheel trueing attachment Sparking-out attachment Set of grinding wheels Set of flanges Steady

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK Operating hours: 30860 Technical data Table length: 1600 mm Table width: 500 mm Axial motion: Longitudinal travel (X-axis): 1640 mm Cross travel (z-axis): 580 mm Grinding wheel: Diameter: 400 mm max. width: 100 mm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 11000 kg Overall dimensions machine: Length: 4900 mm Width: 3300 mm Height: 2600 mm Dimensions electric cabinet: Length: 1600 mm Width: 600 mm Height: 2000 mm Various accessories: Refrigerating device for cooling device Magnetic plate: Length: 1580 mm Width: 500 mm Wheel trueing attachment Set of flanges

Grinding length: 0 mm Grinding width: 0 mm Grinding height: 0 mm Wheel diameter: 0 mm CNC Brand: 0 CNC Model: 0 Control: SIEMENS Technical data Table length: 600 mm Table width: 200 mm Longitudinal travel (X-axis): 600 mm Cross travel (z-axis): 280 mm vertical travel (Y-axis): 370 mm Max. distance from table to spindle centreline: 500 mm Table load max.: 150 kg Grinding wheel: Diameter: 300 mm Width: 32 mm Bore: 76.2 mm Grinding wheel speeds: from: 800 rpm up to: 4200 rpm Table speeds: stepless from: 1 m/min up to: 24 m/min Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 10 kW Total power required: 12 kVA Machine´s weight about: 2300 kg Overall dimensions machine: Length: 2270 mm Width: 1500 mm Height: 1850 mm Various accessories: Coolant system Paper filter facility Electrical magnetic chuck Length: 450 mm Width: 240 mm Wheel trueing attachment Wheel dresser on CNC table Set o ...

Control: MOD. 58 CN Technical data Table length: 900 mm Table width: 400 mm Axial motion: Longitudinal travel (X-axis): 1000 mm Cross travel (z-axis): 500 mm vertical travel (Y-axis): 400 mm Table load max.: 1000 kg Grinding wheel: Diameter: 400 mm Width: 50 mm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 7.5 kW Overall dimensions machine: Length: 3000 mm Various accessories: Magnetic plate: Length: 800 mm Width: 500 mm Wheel trueing attachment Set of flanges Balancing arbor Lamp

Universal cylindrical grinding machine make SCHAUDT type UR 500Fabr. -No: 114024, built in 1971 with internal / external and surface grinding deviceTechnical specifications:Distance between centers: 500 mmCenter height: 250 mmGrinding wheel diameter: 300 mmOperating voltage: 380 VLight voltage: 220 VDrive power bench grinder: 5.5 kWDrive power headstock: 1.1 kWWeight approx: 2000 kgExternal dimensions approx.: 2400 x 1500 x 1770 mmWith- 4-jaw grinding chuck 250 mm- fixed bezel- Tool cabinet with content (see photos)- several grinding wheels with flanges- coolant system- without tailstock !used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine ...

Technical data Table length: 840 mm Table width: 250 mm Grinding length: 600 mm Grinding width: 350 mm Execution: hydraulic Max. distance from table to spindle-centreline: 550 mm Longitudinal travel (X-axis): 620 mm Cross travel (z-axis): 320 mm Automatic cross-feed: stepless up to: 1.2 m/min Table speeds: stepless from: 1 m/min up to: 25 m/min Automatic vertical feed: from: 0.002 mm up to: 0.060 mm Diameter of grinding wheel: 300 mm Width of the grinding wheel: 50 mm Wheel int. diameter: 76 mm Grinding wheel speeds: number (steps): 2 from: 1400 rpm up to: 2800 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 5.2 HP Machine´s weight about: 2800 kg Overall dimensions machine: Length: 2800 mm Width: 1800 mm Height: 2200 mm Various accessories: Wheel trueing attachment Set of flanges: 2 x

Automatic circular knife trimming machine make ELMA type E 144 RBuilt in 1995 for horizontal trimming of stamped sheet metal partsTechnical specifications:Table size: 1100 x 800 mmmax.sheet thickness: 3.0 / 2.0 mmStroke max .: 100 mmGear ratio of the shafts: 4max.overhang of the flanges on the topruning part: 335 mmAir pressure max .: 8.0 Kh / cm²Power connection: 220 - 380 V / 50 HzDimensions approx: 2000 x 1300 x 1600 mmWeight about: 500 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Control: HB CNC 100 Technical data Table length: 800 mm Table width: 450 mm Grinding length: 800 mm Grinding width: 400 mm Grinding height: 500 mm Max. distance from table to spindle-centreline: 150 / 700 mm Longitudinal travel (X-axis): 900 mm Transversal travel (y axis): 400 mm Vertical travel (z axis): 550 mm Automatic cross-feed: stepless from: 0.01 m/min up to: 4 m/min Table speeds: stepless from: 0.02 m/min up to: 25 m/min Automatic vertical feed: from: 1 mm/min up to: 2000 mm/min Diameter of grinding wheel: 400 mm Width of the grinding wheel: 80 mm Wheel int. diameter: 127 mm Grinding wheel speeds: from: 1650 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 23 kW Total power required: 45 kVA Machine´s weight about: 4800 kg Overall dimensions machine: Length: 3200 mm Width: 2400 mm Height: 2400 mm Various accessories: Coolant system Paper filter facility Electrical mag ...

Wheel Balancing Mandrel JONES - SHIPMAN to suit taper flanges, Model 540, Model 1400, Information about technical data are not binding., Machine available subject to prior sale.

Column Drilling Machine make GILLARDON type R 30 VEMasch. -No: 0123213 Year of construction Dec./1976Special machine for processing flanges or rings on the outer edgeDrilling capacity: 40/50 mmTapping performance: M 42 / M 60Spindle mount: MK 4Spindle stroke: 240 mmSpindle speeds: 60 - 1000 rpm.Column diameter: 160 mmHeight adjustment: 680 mmDrive power: 1.1 / 1.6 kWWith- pneumatic additional sleeve stroke- Mot. rotatable, vertical, positioned under the spindlexa0xa0 Three-jaw chuck Roto-Rekord Drm. 475 mm, bore 190 mm- without lower part- without a tableused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

RADAX high-pressure duct fan High-pressure duct fan with cylindrical pipe sleeve, flanges on both sides, directly driven. Cylindrical galvanized steel tube Sheet metal, with double-sided moulded Flange, hole pattern according to DIN 24155, recessed built guide wheel. Semi-axial impeller, eight spatially connected curved blades made of thermoplastic, Balancing quality G 6.3 according to VDI 2060 and DIN ISO 1940. Three-phase squirrel-cage motor by Voltage reduction speed controllable, Thermal contacts, closed design, maintenance-free, sealed, low-noise Ball bearings with long-term lubrication. Fan data (default) Seawater version. Also resistant to weak acids and alkalis. NEW!

This is a fully refurbished, VERY powerful, multitasking Two (Twin) ARP Shaft Shredder. The machine has gone through complete check and change of all flanges, bearings, reducer and oil inside. The machine full specs are: - New motors of total power 20hp - 15kw (2 x 7,5kw motors) - Alternative hydraulic power motors which fit perfect if the machine needs to work on a truck. - 24 knife pieces X 20mm per piece - Made in Germany - Cutting chamber 500mm X 575mm - Approximate weight 2 tons - New control panel with Siemens PLC, Star - Delta, over-current and over-temperature motor protection, Amper Display. - Automatic reverse upon overload and optionally manual forward and reverse. - Special hood used for small items (ie. paper, hard drives) or big hood for barrels and wood. - Hood opens in front for adjusting belt conveyor This is ...

CNC Portal Grinder DANOBAT Year 2010 Table size 8000 x 2500mm X1 table travel 8600mm Grinding width 2650mm Passage between columns 3100mm Grinding height 1400mm Max table load 32000kg Y2 head cross travel 3520mm W2 head vertical travel 1570mm A1 Head angular stroke +/- 110° Angle head indexing 2,5° Wheel size dia 610 x 100 x dia 304,8mm Minimum wheel size dia 450mm Wheel motor power 35kW C2 Automatic wheel changer 2 positions V2 Universal wheel dressing unit 260mm U2 Universal wheel dressing unit 120mm CNC SIEMENS 840 D MARPOSS measuring system Full working area cover with automatic opening on one side for piece loading Machine weight 95000kg Machine plant dimensions with cover 21440 x 6000mm CE Filtering unit with conveyor Set of wheels Flanges Refrigerating unit Installed and working Perfect conditions 4000 working hours Excellent condition

1 piece of used and insulated double chamber silo e.g. for storing cement, microsilica or Stabilmac Capacity 60 to (50m3) double-chamber version, with double partition/insulated! Outlet flange height to lower edge of rotary flap closure 1675 mm Silo diameter 2900 mm Cone inclination, pipe-shaped 60°, (no cone plate) filling pipe diameter 100 mm including - 2 injection pipes up to 1300 mm above the road with B fixed couplings - 2 control openings - Connection flanges for silo fill indicators, exhaust air filters and cement loosening - 2 silo baromats (over- and under-pressure protection) - railing (galvanized) - 2 rotary flap closures on the outlet cone (DN 250) - 2 note boxes. INSULATION of the 60 t silo (roof, cylinder and cone) consisting of: Mineral wool, 80 m and with cover plate For an additional charge: 2 pieces of suitable screw conveyors Location: S ...

Name: Used Progressing Cavity Pump Manufacturer: Netzsch Type: NM063SY03S18K Year of construction: 1999 Material: Normal steel Drive motor: 15 kW Dimensions: L 3200 mm x W 450 mm x H 500 mm Empty weight: 300 kg Speed: 236 rpm operating pressure: 15 bar Operating voltage: 400 /690 V Protection class: 55 Flanges: DN 100 Condition: Used Tech. Documentation: No Accessories: Immediate availability Price: On request

12,500 LITRE WINE TANK / STORAGE TANK CUBIC, HORIZONTAL WITH FLAT BOTTOM MADE OF V2A approx. 43 tanks in sizes from 5,100 litres to 12,860 litres under :https://eurolux.de/neue-produkte Specifications: Kat.Nr. 24-0520 Volume 12500 L MJ UNI-RILL Surface inside 2B=IIIC sanded Surface outside 2B=IIIC sanded Weight 800 kg Material V2A (AISI 304) 1.4301 Width 2450 mm Total height 2500 mm Depth 2750 mm Cubic design Number of feet on truss Last Use Food Tank crown: Flat bottom with 1 % slope Threaded socket DN50 Cylinder: Manhole 450 x 350 mm oval Trial faucet 1/2" with flanges Clear drain DN50 Subsoil: Residual drain with butterfly valve DN50 on truss

Name: Progressing cavity pump used Manufacturer: Netzsch Type: NM063BY03S18B Year of construction: 2003 Material: Normal steel Drive motor: 15 bar Dimensions: length 2900 x width 400 x height 500 mm Empty weight: 250 kg Operating voltage: 400 / 690 V Protection class: 55 Flanges: DN 100 Condition: Used Tech. Documentation: No Price: On request

- year of manufacture 2001 -DTR - after HOMAG service - pre-cutter, earning corners - wooden glue up to 9 mm TECHNICAL PARAMETERS: machine tool adapted for machining PVC/ABS flanges veneer up to 3 mm thick and wood stickers up to 9 mm thick pre-cutter - milling the board belt pressure tank with glue, for hot melt glue granules additionally roll for applying glue heated strip tape strip guillotine - pre-cutting veneer 3 pressure rollers 2 ready-made ball cutting units 2 edge milling units (radial cutters) corner earning unit (milling) scraper aggregates - for removing excess glue polishing units .max. element thickness 50 mm Min. element width 60 mm Min. element length 160 mm feed speed 96 m/min total power 10,8 kW extraction connection diameter 120 mm dimensions (L/W/H) 5700 / 1200 / 2100 mm weight 2000 kg