fire truck used for sale

Kohler Diesel Generator Set 20 / 22 kVA - NEW E-Start - AVR - 230 / 400 Volt - - - - - Engine: - Manufacturer: Kohler (Italy) - 2 cylinders - Diesel - Air-cooled - Power: 26 hp - 1248 cc - - - - - Generator: - Manufacturer: Linz (Italy) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - - - - Equipment: - Electric start - AVR controller - 1x 230V 16A socket - 1x 400V 32A socket - incl. hedging - Key start - Voltmeter - Ammeter - Hertz display - Operating hours counter - Low oil pressure warning light - - - - - Other data: - Dimensions: 120 x 62 cm - Weight: 271 kg - Consumption: 4.0 ltr. / h (75%) - - - - - Scope of delivery: - Kohler Diesel Generator Set 20 KVA - with electric start - Start unit - Tank - Exhaust - Battery - Sockets - - - - - Transport: - A Germany-wide transport including unloading by truck with lifting pl ...

Fettbackstation / Berliner Backstation consisting of 4 fat pans 1x Donut Filler 1x large exhaust hood incl. fire extinguishing function

E-shaped platform for re-entry with hand forklift truck, foot protection contact strip, pedal operation

Yanmar Diesel Generator Set 7 kVA E-Start - AVR - 230 / 400 Volt - - - - - Engine: - Manufacturer: Yanmar (Japan) - Model: L100AE - 1 cylinder - Diesel - Air-cooled - Power: 10 hp - - - - - Generator: - Manufacturer: Linz (Italy) - 6 / 7 kVA - 230 / 400 volts - 50 Hertz - - - - Equipment: - Electric start - AVR controller - 1x 230V 16A socket - 1x 400V 16A socket - incl. hedging - Voltmeter - - - - - Other data: - Dimensions: 78 x 57 cm - Weight: 122 kg - Consumption: 1.8 ltr. / h (75%) - - - - - Scope of delivery: - Yanmar diesel generator 6 / 7 KVA - with electric start - Tank - Exhaust - Battery - Sockets - - - - - Transport: - A Germany-wide transport including unloading by truck with lifting platform and pallet truck is possible for an extra charge - Freight price on request - - - - - Price, invoice and payment: ...

Steam capacity at 102 ºc of nutritious water --- 10000 kg / h Heat efficiency --- 6.5mW Permissible excess pressure --- 13 Bar Working pressure --- 12 Bar Water content --- 19 m³ Total water content --- 22.6 m³ Transport weight ---- 21,3 t Working weight --- 40.6 t Fuel --- Gas and diesel Manufacturer of water --- Weishaupt Type of water --- Weishaupt G 70 / 2A Water adjustment --- Modulated The heat is the voltage of the current volume --with full fire chamber --- 1.02 mW - without full fire chamber --- 1.21 mW Boiler efficiency - at 100% productivity --- 90% - at 50% productivity --- 90.5% Boilers are still running and video is available on request

all stainless steel electrically heated 85 kW frying length 3.000 mm belt width 500 mm mechanical lid oil level control Teflon-infeed oil circulation pump filter sediment removal system hoists fire protection total length ± 6.300 mm total width ± 1.500 mm total height ± 3.310 mm

Spreading attachment Küpper-Weisser STA80 W12H. Attachment device for Unimog, trucks, equipment carriers, etc. with municipal hydraulics. Content 1.2 cbm . Equipment: tarpaulin folding roof, control panel and documentation. Further spreading technology as well as snow clearers in various designs and sizes stock edstocked! Info and offers on request. We do not send package deals, lists and do not respond to anonymous messages - please give full name and place of residence as well as tel. no. for inquiries. Please be happy to receive advice by phone in advance. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

suitable for thermal oil heating 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

Diesel generator set 9 kVA - NEW E-Start - AVR - Emission Standard Stage V - - - - - Manufacturer: - CGM, Italy - - - - - Engine: - CGM, 4-stroke, diesel, air-cooled - Displacement: 498 cc - Power: 12 hp - - - - - Generator: - 9 kVA at 400 volts - 7 kVA at 230 volts - Voltage: 230 / 400 Volt - Frequency: 50 Hertz - - - - - Starting unit / control unit: - Ignition lock for starting and stopping - Digital display with monitoring displays, such as .B volts, amps, hertz, kW, operating hours - - - - - Sockets: - 1x 400V 16A - 1x 230V 32A - 1x 230V Schuko - Incl. RCD - - - - - Equipment: - AVR voltage regulators (so even sensitive devices can be operated) - Electric start - Oil deficiency protection (generator set does not start when the oil level is too low) - Overload protection - Automatic start interface (ATS connection) for easy inse ...

30,000 litre extinguishing water tank according to DIN 6608/2, double-walled, external with a high-quality PUR-ENDOPRENE insulation in accordance with DIN 6607. PUR-ENDOPRENE is a 2-component solvent-free Polyurethane insulation with excellent insulation properties. can be used as a water tank, extinguishing water tank, extinguishing water tank, extinguishing water retention tank, Rain retention tanks, cisterns, etc. - Factory new - Dimensions: D = 2.00 m - L = approx. 10.00 m - weight approx. 6.2 to. With welded dome shaft approx. 800mm high, as well as a walk-in cover, galvanized + tagwaterproof. For use as a fire-fighting water tank, we can use the tank fully equipped with a fire brigade suction connection. Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line ...

Diesel generator set 13 kVA - NEW E-Start - AVR - Emission Standard Stage V - - - - - Manufacturer: - CGM, Italy - - - - - Engine: - CGM, 2-cylinder, diesel - Water-cooled - Displacement: 794 cc - Power: 11.5 kW / 16 hp - - - - - Generator: - 12 / 13.2 KVA at 400 volts - 9 / 9.9 kVA at 230 volts - Voltage: 230 / 400 Volt - Frequency: 50 Hertz - - - - - Starting unit / control unit: - Digital start unit (ComAp InteliLite 9) - Manual start at the push of a button - Automatic start function - Digital display with monitoring displays, such as .B volts, amps, hertz, kW, operating hours - - - - - Sockets: - 1x 400V 16A - 1x 230V 32A - Incl. RCD - - - - - Equipment: - Soundproofed housing - AVR voltage regulators (so even sensitive devices can be operated) - Electric start - Oil deficiency protection (generator set does not start when t ...

Truck DAIMLER CHRYSLER Actros 2644 with loading crane HIAB 330-5 + Jib 90-4 Truck DAIMLER CHRYSLER Actros 2644, B9th3af Wheel drive 6x4, air suspension front and rear, AHK, open box with charger, FG-No. WDB9302441xxx EZ 06/04, GG 26 t, km-stand approx. 417,000, diesel, green badge, HU 09/19, 11.946 cm3, 320 kW Crane Hiab 330-5 with radio remote control Jib 90 with winch Rotzler, 3 hydraulic ejectoons + 1x mechanical ejectothe. Maximum extension 26m with lifting force 690kg

100 m³ / 100,000 l extinguishing water tank according to DIN 14230 Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 16,300 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in  ...

90 m³ / 90,000 l extinguishing water tank according to DIN 14230 Tank volume: 90,000 liters / 90 m³ Length: approx. 13,500 mm Diameter: approx. 3,000 mm Weight approx. 11,000 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage in accordance with DIN 6608, single or double-walled, suitable for walkable and passable areas (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in N ...

80 m³ / 80,000 l extinguishing water tank according to DIN 14230 Tank volume: 80,000 liters / 80 m³ Length: approx. 12,780 mm Diameter: approx. 2,900 mm Weight approx. 13,250 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN  ...

Suction slot duct system for passenger cars and trucks, exhaust extraction duct unit Npnfl Complete system with suction duct, trolley, suction hose, suction blower. Length approx. 20m, 3 suction hoses Aspirator

Extinguishing water tank Extinguishing water tank 100,000 litres steel tank, earth tank can be used as extinguishing water retaining tanks, Sports field irrigation, rain retention tanks, cisterns, etc. Factory new Dimensions: D = 2.90 m - L = approx. 16.00 m On request, the container can be fully equipped with a fire-fighting water suction connection: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: For use as a fire-fighting water tank, we can use the tank fully equipped with a fire brigade suction connection, consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A, with Storz A-fixed coupling and Storz A-blind coupling, - 1 pc. vent pipe DN100 with stainless steel hood - V2A, - 1 pc. anti-vortex plate mounted on suction line, - 1 pc. sign "Extinguishing water colle ...

Qty. 40 Second-hand diesel generator sets – never installed Type: HFO, LDO fired Generator Sets 8.7 MW each, 50 HZ Mfc.: MAN Built: 2010 Upgrated & Refurbished: 2015/17/18 Alternator new : 2017-2020 Controls: 2020 Condition: Excellent, preserved by OEM continuously and stored in Warehouse based on preservation contract Running hours: 0 hrs Guarantee: 18 month from shipping date or 12 months from commissioning date!

60 m³ / 60,000 l extinguishing water tank according to DIN 14230 Tank volume: 60,000 liters / 60 m³ Length: approx. 12,680 mm Diameter: approx. 2,500 mm Weight approx. 9,500 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN 1 ...

50 m³ / 50,000 l extinguishing water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight approx. 8,000 kg Material: Steel material S 235 JRG 2 Underground tank for underground storage according to DIN 6608, single or double-walled, suitable for the walkable and passable area (load class SLW 30) with 1 dome (manhole) DN 600 with blind lid, seal and screws. New or used immediately available! The container is emptied, cleaned, overhauled and tested for leaks by us as a specialist company. The container complies with the regulations of DIN 14230 (Underground extinguishing water tank): - Extinguishing water suction connection according to DIN 14244 with a mounted Fire brigade coupling / fixed coupling A according to DIN 14319 in the Form B version without bearing nozzle - Vent flange nozzle in NWN 1 ...

Several 150 m³ storage tanks made of steel (extinguishing water tanks) lying underground Volume: 150,000 liters Diameter: approx. 3,000 mm Length: approx. 22,500 mm Weight: approx. 28,000 kg The tanks are converted into underground extinguishing water tanks in accordance with DIN 14230: The tank has an extinguishing water suction connection according to DIN 14244 with a mounted fire brigade coupling / fixed coupling A according to DIN 14319 in the version form B without bearing nozzle. Furthermore, the tank has a vent flange nozzle in NW/DN 100 with cap in a total length of approx. 1,300 mm suitable for 800 mm earth cover and 500 mm above ground. - the container is emptied, cleaned and has been provided with a bitumen exterior paint by us at the factory - if necessary, we can equip the tank with an inner full coating based on bitumen (against corrosion) or epoxy res ...

Control: Mitsubishi - 64 bit CNC Generator power: 70 amperes, multipulse Travel (X, Y, Z): 525 x 400 x 450 mm Working container (W x D x H): 750 x 650 x 420 mm (stroke tank) Work table (W x D): 730 x 630 mm Capacity: 1,000 kg Electrode changer: 30-fold pick-up plate magazine Accessories: - CO2 fire extinguishing system, - HSJ technology (High Speed Jump), - integr. Cartridge filter system, - MultiProg programming room software Status: outdated Warranty: - Price: On request

100.000 Liter water tank - Earth tank for underground storage, single or double walled, 1 dom DN 600 with blind lid incl. seal and screws - used - Tank volume: 100,000 liters / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 11,600 kg Material: Steel material S 235 JRG 2 - the container is emptied, cleaned and has been provided with a bitumen exterior paint by us at the factory - if necessary, we can equip the tank with an inner full coating based on bitumen or epoxy resin inner coating (against corrosion) - it is also possible to line the container with a plastic inner shell - as standard, the container receives an inflow or overflow suitable for 100 KG pipe (other nominal diameters are also possible) A cost-effective delivery with your own truck is possible. Simply tell us the place of delivery, you will then immediately receive the exact ...

Vertical Turning Machine Modified with SUPFINA superfinishing device as a polishing machine. Workspace Chuck diameter: 250 mm Plan transfer stroke X: 800 mm Longitudinal stroke Z: 300 mm Feed Rapid speed X: 100 m/min Rapid velocity Z: 45 m/min Spindle box Spindle head (flat flange): 170h5 mm Spindle diameter in the front bearing: 120 mm Spindle bore: 79 mm Main drive Power of the three-phase hauplan drive: 22 kW Torque ED 100%: 210 Nm Speed range: 20 ? 5000 rpm C-axis Speed range: 0-100 rpm Torque (holding torque brake): 240 Nm Point silence accuracy: < 0.02 degrees Tool carrier Number of tool stations: 12 Tool holder according to DIN 69880 Cylinder shaftdiameter: 40 mm Drive power (40% ED): 10.8 kW Torque: 28 Nm Speed, max.: 6000 rpm Hydraulics Content, complete: approx. 25 L Pressure max.: 80 bar Pressure for clamping device, max.: 70 bar Coolant device Content: approx. 25 L Pump pow ...

Platform stairs for assembly or maintenance on containers or truck bodies, etc. Weight 328 Kg Belbility platform max 300KG each 150Kg per side Stand area 25002250mm with folded side work surfaces with folded out side parts 3850mm Work surface platform size 3850 1000mm Stand height measured from the ground 2200mm

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Sheet Metal- & Profile Steel Shear Mubea KBL 11 with notcher and punching press manufacturer: Mubea type: KBL 11 mach.-Nr.: 107/3019/7 year of construction: ? comm.-Nr.: 0250/125/200/0575 stock-Nr.: 1911 + Regular Price: 2.750,- € > Reduced Price: 1.375,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) Flat Steel Shear blade length: 220 mm sheet metal up to: 11 mm flat steel up to: 125 x 13 mm Profile Steel Shear angle irons up to: 80 x 9 mm T-iron up to: 80 x 9 mm U- and I-iron up to: NP 10 hubs: ca. 55 / min. Steel Bar Shear steel bars up to: 35 mm square steel up to: 32 mm Notcher  ...

Key data: 6400 , 8000 , 11000

12.8 MW WARTSILA HFO fired power plant 18V32LN x 2, 6.52 MW / 11 KV / 60 Hz , Year 1998, Running hours : 27000 , may convert to 50 Hz if required

Used, partially repaired, tested truck engine in exchange The old part deposit in the amount of 2,500.00 Euro will be credited again regardless of the condition of the old engine 6-month warranty Price plus VAT and shipping

Machine is not in working condition, and can be used for spare parts only. , Workspace Chuck diameter: 250 mm Plan transfer stroke X: 800 mm Longitudinal stroke Z: 300 mm Feed Rapid speed X: 100 m/min Rapid velocity Z: 45 m/min Spindle box Spindle head (flat flange): 170h5 mm Spindle diameter in the front bearing: 120 mm Spindle bore: 79 mm Main drive Power of the three-phase hauplan drive: 22 kW Torque ED 100%: 210 Nm Speed range: 20 ? 5000 rpm C-axis Speed range: 0-100 rpm Torque (holding torque brake): 240 Nm Point silence accuracy: < 0.02 degrees Tool carrier Number of tool stations: 12 Tool holder according to DIN 69880 Cylinder shaftdiameter: 40 mm Drive power (40% ED): 10.8 kW Torque: 28 Nm Speed, max.: 6000 rpm Hydraulics Content, complete: approx. 25 L Pressure max.: 80 bar Pressure for clamping device, max.: 70 bar Coolant device Content: approx. 25 L Pump power: 1.7 kW Flow ra ...

Fuselage engine Actros OM 501 LA - Euro 2 - Type 541.922 - Truck engine in exchange The engine is completely overhauled with new pistons, cylinder bushings, new bearings and new oil pump. The cylinder heads are completely overhauled with new valves and valve guides. The compressor crankshaft and compressor connecting rods are pre-assembled. The old part deposit in the amount of 1,500.00 Euros will be credited, regardless of the condition of the old engine. Warranty: 1 year without KM limit Price plus VAT and shipping

Vertical Turning Machine Modified with SUPFINA superfinishing device as a polishing machine. Workspace Chuck diameter: 250 mm Plan transfer stroke X: 800 mm Longitudinal stroke Z: 300 mm Feed Rapid speed X: 100 m/min Rapid velocity Z: 45 m/min Spindle box Spindle head (flat flange): 170h5 mm Spindle diameter in the front bearing: 120 mm Spindle bore: 79 mm Main drive Power of the three-phase hauplan drive: 22 kW Torque ED 100%: 210 Nm Speed range: 20 ? 5000 rpm C-axis Speed range: 0-100 rpm Torque (holding torque brake): 240 Nm Point silence accuracy: < 0.02 degrees Tool carrier Number of tool stations: 12 Tool holder according to DIN 69880 Cylinder shaftdiameter: 40 mm Drive power (40% ED): 10.8 kW Torque: 28 Nm Speed, max.: 6000 rpm Hydraulics Content, complete: approx. 25 L Pressure max.: 80 bar Pressure for clamping device, max.: 70 bar Coolant device Content: approx. 25 L Pump powe ...

25x 250 ltr. VA2 transport tanks / transport containers, slightly pressure-resistant, manufacturer: Umformtechnik Hausach, used, round standing, stackable (only empty recommended), dom above NW 125 with safety valve system Stöklin + 2x CO2 valve large NW 40 + small NW 25 system Stöklin, residual outlet with disc valve NW 50, operating pressure 0.9 bar, test overpressure 2 bar, pressure resistant for e.B. overlay with CO2 or CO2 impregnate, ideal also for refilling barriques, Weight/h.: 57 kg, cleaned inside, very stable design, can be driven under with pallet truck or e-ant Diameter: 0.62 m, H: 1.50 m, Price/hour: 550,- € plus VAT ex warehouse Dolgesheim

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Electro.-Pneum. Hot stamping press Gierlich PE600 with round table, 6 stations manufacturer: Gierlich type: PE600 mach.-nr.: 05437 year of construction: ? comm.-nr.: 0101/100/230/0431 stock-nr.: 1864 + Regular Price: 4.850,- € > Reduced Price: 2.425,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) pressure: 600 kg, adjustable height adjustment: 210 mm stamping table size: 300 x 110 mm temperature up to: 400° C, adjustable air pressure up to: 10 bar, adjustable time setting for lifting/lowering: 0 – 6 Sec./Min. voltage: 220 V / 50 Hz weight: ca. 350 kg standing area: W 950 x D 1005 x H 1600 mm  ...

A 7-stage GEA Wiegand evaporation plant with mechanical vapour compression, Made of V4A material with 2 identical high concentrators and one Vapour compression system for 2 Hoko systems. Capacity: 50,000 litres per hour Year of manufacture 2007 Product enema: 52,000 kg or 38,500 kg/h Concentrate: 12,240 kg or 18,900 kg/h for truck transport Steam consumption Low pressure steam : 300 kg/h with Live steam: 1,000 kg/h, when heating the system max. 2,300 kg/h further energy data can be found in the plant With a concentrate supply tank and with a complete cleaning system, location ground floor with complete tank piping to 2 x 50,000 l tanks and with complete control in Siemens S 7, as well as for the Entire electrical supply with 5 wall control cabinets for pneumatic cabling housed in 5 control cabinets, with various smaller frequency converters and 1 frequency con ...

2 nos. GE PG9171E 180MW / 50 Hz gas fired combine cycle gas turbine power plant, year 2004, around 31,000 hr - 34,300 hr, Steam turbine is 60MW each , and complete with heat recovery boiler. Welcome enquiry for buying only 1 or 2 gas turbine or includes engineering works.

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Tool presetter Zoller V 520 manufacturer: Zoller type: V 520 year of construction: 2000 comm.-nr.: 0200/133/083/0416 stock-nr.: 1909 + Regular Price: 3.850,- € > Reduced Price: 1.925,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) Measuring area X-Axis: 210 mm Measuring area Z-Axis: 620 mm (tower height 800 mm) tool reception: SK 50 / 0300106 / Z=+20.000 current: 220 V / 50-60 Hz weight: ca. 400 kg standing area: W 1,40 x D 0,70 x H 1,90 mm voltage: 220 V / 50 Hz weight: ca. 350 kg standing area: W 950 x D 1005 x H 1600 mm features Digital measuring device Heidenhain” in X+Z Manual f ...

Apple pomace drying as a precursor for pectin production at albi Berghülen Capacity: up to 1.5 tons of pomace per hour, built in 1977 and 1992 Manufacturer: Kunz AG, Dintikon CH Function The apple coming from the winery became damp pomace with a transport screw into a pomace transport system open at the top transported diagonally upwards, and then via a further transport screw, D= 600 mm in the all-round running round drying chamber, D = 360 mm, L = 11,400 mm. With an internally welded bucket in the drying chamber, the still damp pomace moves intensively with the hot air. At the same time, a gas burner flame and the furnace blow the hot gases into the drying chamber. Length burner and oven together: 6,500 mm The pomace waste, which is dried and crushed at the same time, is processed by an ejection chamber located directly at the end of the drying chamber with a t ...

Low-lift trucks, electric pallet trucks Manufacturer BT Type LWE180 Built in 2015 very good condition Only approx. 1,330 operating hours / duty-switched-on hours

Low-lift trucks, electric pallet trucks Manufacturer Still Type EGU20 Load capacity 2,000kg Built in 2003 very good condition Only approx. xxx operating hours / duty-turned-on hours With charger Special price

Aluminum circular saw machine make KALTENBACH type SKL 450 NAYear of manufacture 2001Technical specifications:Saw blade diameter: 450 mmCutting speed stepless: 0 - 3000 mm / min.Rapid return: 4500 mm / min.Cutting range around 90 degree: 160 mm: square 90 degree: 145 mm: square 45 degree: 130 mm: flat 90 degree: 250 x 40 mm: flat 45 edree: 320 x 50 mmStroke length of the automatic feeder: 1000 mmMultiple stroke: 9999 mmSwivel range for multiple strokes: 180 degreeExternal dimensions approx .: 2700 x 1450 x 1900 mmWeight approx .: 1480 kgWorking height :: 1010 mmDrive power: 3.7 / 4.7 kWused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machi ...

Electric pallet truck, low-lift truck Low-lift trucks, electric pallet trucks Manufacturer Yale Type MP16 Built in 2015 only approx. 300 operating hours incl. charger Ansolut new condition with only 102 operating hours! Special price

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Industrial extraction system NESTRO NE160 manufacturer: NESTRO Lufttechnik GmbH type: NE 160 mach.-Nr.: 1041 year of construction: 1994 comm.-Nr.: 0549/210/100/0859 stock-Nr.: 1803 + Regular Price: 2.180,- € > Reduced Price: 1.090,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) intake manifold Ø: 160 mm filter area: 11,5 m² volume flow: 1.780 m³/h (after cleaning) Negative pressure in front of ventilator: 3.000 Pa Minimal volume: 1.447 m³/h Negative pressure in front of ventilator: 3.550 Pa Negative pressure at connection: 3.100 Pa – (4,0 m hose length mit Ø 160) working temperature: 5° to 4 ...

Aluminum automatic saw make ELUMATEC type SA 73/25Machine -No: 20124 built in 1990for mass cutting of aluminum profilesTechnical specifications:Saw blade diameter :380 mmSaw blade bore: 32 mmCutting area: 195 x 120 mmSaw blade speed: 3000 rpm.Pivoting range:90°Feed lengths:5 - 250 mmTable size: 200 x 600 mmVoltage: 220/380V 50HzPower output: 3 kwCompressed air connection: 7 barDimensions: 2700 x 1350 x 1470mmApprox. weight: 140 kgwith- Saw blade 370 mm- Micro spray device- pneumatic material clampingused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Horiz. Surface Grinding Machine JUNG G 60 manufacturer: JUNG type: G 60 mach.-Nr.: 14508 comm.-Nr.: 0400/090/270/0760 stock-Nr.: 1913 + Regular Price: 2.850,- € > Reduced Price: 1.425,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) table clamping surface: 600 x 200 mm max. grinding length: 600 mm max. grinding width: 200 mm table speed: infinitely adjustable up to 15 m / min. max. grinding wheel – Ø : 200 mm max. grinding wheel width: 30 mm drive power: 1,6 kW weight: ca. 1.100 kg standing area: W 1,60 x D 1,30 x H 1,80 m features automatic cross feed hydr. table adjustment, infinitel ...

Radial arm Saw make ELU type 1251Machine -No: 0045 Year 1993Cutting area longitudinal: 645 x 68 mmtransverse: 370 x 68 mmSaw blade size: 250 mmSaw blade speed: 2800 rpm.Boom rotatable by: 360 °Motor mount rotatable by: 360 °Connected load: 1450/1100 WPower connection: 220 V 7 50 HzWeight: 54 kgExternal dimensions: 1150 x 1150 x 2000 mmWith- Chip extraction- side and rear chip protection- Underframeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Stage bracket for Kemper HK 150 lift truck

Stage bracket for Kemper HK 150 lift truck -for lifting and tilting Kemper boilers

Truck Mercedes Benz 814 D approx. 154,000 km with platform and Rungenstock with followers

No. 4635: 1 gebr. Electric drawbar forklift / high-lift truck 1 to Fabr. TOYOTA, Type 7 SM 10 / 24 V, Bauj. 2003 with nominal load capacity 1000 kg Arb.-Ber.: lifting height 2900 mm, Accessories: Charger 24 V

Glass bead saw Fabr. STRIFFLER type 2730Fabr. -No: 136, built in 1978for sawing strips (glazing beads) to 45 °Technical specifications:2 x saw blades: Drm. 200 mm carbide tipped2 x pneumatic workpiece clamping approx. 40 mmSaw stroke: 400 mmHeight adjustment: 40 mm2 motors: 0.75 kW, 380 V, 2830 rpm.Operating pressure: 6 - 8 barWith:- Underframe- Manual saw feed- Safety device against unintentional pulling of the sawxa0xa0 gensets forwardused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools