fil used for sale

HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier  ...

FILLETING MACHINE, BAADER 36 Technical description: Power supply: 400 V/50Hz Dimensions: 3500 X 1000 X 1700 mm - 2300 X 1000 X 1100 mm Can be combined with Automatic feeder BAADER 488 The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483 or 484. A skinning machine BAADER 55 can be attached for the production of skinless herring fillets.

FILLETING MACHINE FOR SARDINE, HERRING, BLUE WHITING, BAADER TYPE: 134 Technical description: Power supply: 380 V, 50 Hz, 12,0 A, 2 kW, 3 Ph Dimensions: 3000 x 2100 x 1200 mm Weight: 450 Kg Can be combined with Automatic feeder for sardine and herring, Baader type: 478 This machine is especially designed for the filleting of small herring and pilchard with an overall lentgh of 15-25 cm (25-125 g), the convenient infeeding procedure and the steplessly adjustable operating speed permit high throughput. Excelent yield is guaranteed by a meat-saving selfadjusting headcut, adjustable tailcut and reliable passage through the filleting tools leading to smoothly cut block-fillets, single fillets without dorsal fins as well as belly cut herring with or without tail fins. Combined with the automatic feeder BAADER 478, the machine becomes an automatic filleting unit operated by only one person fo ...

FILLETING MACHINE BAADER 35 WITH NOBBING SYSTEM (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WHITING (22-40 CM) AND OTHER PELAGICS Technical description: Serail number: 10-1363-0035 Year: 1992 Throughput: 100-200 pieces/min Dimensiones: 3300 x 1250 x 1800 mm The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483, 484 or 488. A skinning machine BAADER 55 can be attached for the produc ...

A film banding machine with shrink wrapper Meurer packaging machines is available. Banding capacity: 35 products/min, bundle capacity range: 1x5/1x10, product dimensions X/Y/Z min./max.: 120mm x 120mm x 70mm / 265mm x 125mm x 38mm, bundle dimensions X/Y/Z min./max.: 228mm x 265mm x 125mm / 350mm x 120mm x 120mm. Machine dimensions X/Y: approx. 3300mm/3020mm, operating hours: approx. 5842h. Documentation available. On-site inspection is possible.

A dust extraction system is available. 1) Filter unit FAV FSR219/200-FDK, year of construction: 2019. 2) Fan intensive filter RM 50-N-60, air volume flow: 20000m³/h. 3) Intensive filter fan RM 28-N-45, air flow rate: 6900m³/h. 4) Fan intensive filter RM 50-N-60, air flow rate: 20000m³/h. Documentation available. On-site inspection is possible.

A Nederman filter box extraction system is available. Filter: activated carbon, filter type: F7/F9/F11/activated carbon 1/activated carbon 2, power: 20kW, machine dimensions X/Y/Z: approx. 5000mm/2500mm/1500mm. Including steel frame, piping and extraction hoods. Documentation available. On-site inspection is possible.

TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor, Screw length 8.300 mm, The bearings are dust-tight and automatically greased., at the end o ...

TANKER TRUCK LOADING SYSTEM, for plastic granules, Maximum speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1,000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper at a rate of 60 m3 per hour, the 300 mm.Ø screw can be lifted and lowered to easily move inside and outside., Maximum discharge heig ...

SEVAL is a type of machinery often used in the packaging industry, particularly for filling sachets with a variety of products. Sachet fillers are designed to efficiently fill small, often single-use packets with goods such as powders, liquids, granules, or even solid items., Key Features of SEVAL Sachet Fillers:, - Versatility: SEVAL sachet fillers can handle different types of products, making them suitable for various industries including food, pharmaceuticals, cosmetics, and chemicals., - Automation: These machines are often semi-automatic or fully automatic, enhancing efficiency and reducing the need for manual labor. They can integrate with other packaging systems for a streamlined process., - Speed and Efficiency: SEVAL fillers are designed to operate at high speeds while maintaining accuracy in filling volumes. This is crucial for high-volume production settings., - Precision: Th ...

volume capacity: 1600 m3/h feed volume: 99,9 % length: 3.000 Absaugschlauch mm motor: 230 Volt motor: 1,1 KW weight: 80,0 kg range L-W-H: 580 x 580 x 900 mm Description: The filtoo filter device newly developed by TEKA is a mobile filter system that many Tasks in the field of filtration of Smoking, dusts and gases can be used. Also suitable for high-alloy steels (stainless steel). (the device was based on DIN EN ISO 15012-1 (2005) tested and is IFA (formerly BGIA) certified (IFA No. 201020469/1140) for welding smoke class W3 (degree of separation:> 99.9%)) Where can the SIG 230 filtoo be used? - at welding workplaces - in the workshop area - for soldering applications - with restorers - in locksmiths Furnishing: - BGIA - certified suction and filter system IFA 1005030 for suction to hochleg. Steels & non-ferrous metals - Operating instructions in German optional equipment for a surchar ...

SPECIFICATIONS: Rotary table: Ø 1500 mm Wrapping with stretch film Working height: max. 2900 mm Electronic adjustment Installed power: 3 kW

Paper Belt Filter Coolant system with paper filter, for grinding machines Make : AME GmbH, Anlagen Maschinenbau Emsdetten BEDA - Germany Type: PS 50 Year of construction 2015 Weight 230 kg Coolant pump Company Brinkmann Pumps Type: BFS232/40+001 Coolant : 100 litres Filter belt width : 420mm Auto. Filter belt feed Dimensions: Length : 160cm ; Width : 50.5 cm ; Height : 102 cm;

BANDERA BLOWN FILM EXTRUDER, for PE, Bandera extruder with screw diam.90 mm., 250 mm die diam. on original Bandera head, reconditioned (not the one in photo), a.c. drive with inverter, calibrator, haul off unit, corona treatment, single color small printing group, single winding station with manual discharge 1.200 mm., good overall conditions, availability: immediate, working width: 1.200 mm., conditions: good

Belt grinding unit for machining the side surfaces of the workpiece with pneumatic belt tensioner. Specifications: Belt grinding unit: - Tilt device from -1° to +15° - Strap size 2500 x 100 mm - Cutting speed 18/36 m/s - Motor 3.7/4.4 kW - With protective cover and nozzle ø 120 mm for hose connection to the dedusting system - Two-roller device for free belt grinding. Roller diameter 75 mm, wheelbase adjustable from 225 - 320 mm - Swivelling horizontal slide, travel 130 / 220 mm, actuated by handwheel - Fixed bracket for grinding unit - Feed device, pneumatically controlled, travel 5 - 20 mm Table unit: - Linear workpiece carrier table with autom. Feed, travel 700 mm, clamping surface 300 x 250 mm, working speed from 15 - 150 mm/s, working path freely programmable by the automatic machine - Track crawler for cable duct for electrical cables and pneumatic hose - Clamp ...

Ghioldi single layer blown film extruder, suitable for LDPE and MDPE, extruder with 55 mm Ø screw diam., lever screen-changer, Rotating head, 150 mm Ø die, calibrating cage, pull off unit, gusseting units, Cason corona treatment, 1.100 mm single winding station, Tower included, complete with manuals, electrical drawings, CE compliance

Moulds

General SKU392U1285 LocationBarneveld MakeK-tron / Burgener TypeK-PH-MV-KT20 / AFS002 No.1102400/M-984900 Main Features MaterialStainless steel Motor0.75 KW Inlet diameter200 mm Specified Features - Metering screw MaterialStainless steel 1.4401 (316), Stainless steel 1.4404 Metering screws Metering screwcheck Screw diameter± 25 mm (2x) Pitch± 10 mm Screw length300 mm With hoppercheck Hopper sizesdia. 200x220 mm Inletdia. 200 mm OutletDN40 With motor0,75 kW Screw speedmax. ± 460 rpm: With breaking/mixing shaftcheck (max. ± 21 rpm) Motor0,75 kW Information Year of construction2011 Mounted on framecheck Mounted on legscheck Mounted on wheelscheck CEcheck With switchgearcheck Floorspace1,4x0,8 m Total height2,4 m ATEX compatiblecheck Extra SpecificationsThe filling plant allows for the semi-automatic filling of biologically highly active, hygroscopic,  ...

General SKU324U769 LocationBarneveld MakeHecht technologie Type7_271801 Mach.No.207656 Main Features MaterialStainless steel Motor0.03 KW Specified Features - Miscellaneous MaterialStainless steel 1.4552, Stainless steel 1.4301 (304) Capacity± 1500Ltr. Motor0.03kW,230Volt Information Year of construction2013 CEcheck Floor space2x1,1m Total height2,17m Extra Specificationsunused This article is a disposable film insulator for filling small quantities. The device is equipped with a replaceable cover. Extra parts are provided during the sale, including many covers. Additionally, there is a fan with a filter installed. MiscellaneousHechtMiscellaneous > MiscellaneousBrand > Hecht What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machin ...

General SKU269X297 LocationBarneveld MakeKillion TypeKL-075 No.19707 Year of construction1995 Main Features Motor1.1 KW Inlet diameter35 mm L/D26 Specified Features - Single screw extruder Single screw extrudercheck Screw diameter19,1 L/D26 Number of heating zones:3 Electric heating18,4 KVA, 380 volt, DC-motor1,1 kW, 380 volt Screw speed12-120 rpm InletDia. 35 mm Feeding with hoppercheck Number of temperature controllers:3 MaterialStainless steel Information Mounted on frameOn wheels With switchgearcheck Total height1,50 m Weight300 kg CEcheck Floorspace1,10x0,90 m Extra Specificationsextruder comes with: Thermo Prism TSE systems nr: 5265. year: 2002 Single screw extrudersKillionExtruders > Single screw extrudersBrand > Killion What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to a ...

General SKU271X309 LocationBarneveld MakeNewWeight TypeE234A Mach.No.13.1202-1 Main Features MaterialStainless steel Length1900 mm Width300 mm Specified Features - Vibro feeder MaterialStainless steel Vibro feedercheck Feeder width300 mm Feeder length1900 mm Closedcheck With hoppercheck 540x550x450 mm Inlet280x130 mm OutletDia. 210 mm With unbalance drivecheck (3x) With motorcheck 230 volt With frequency controllercheck Information Year of construction2014 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Total height3,0 m CEcheck Floorspace2,0 x 2,40 m Weight485 kgVibro feedersNewweighConveying systems > Vibro feedersBrand > Newweigh What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld ...

The LiquiPrep LP804 50/20 by Material Preparation and Feeding Unit is a state-of-the-art automated system designed for the continuous, bubble-free supply of high-viscosity media, including gap fillers, thermally conductive pastes, and adhesives. It boasts a tank capacity of 53.5/24.6 L (gross) with an agitator speed of 39 rpm and a maximum feed pressure of 12 bar. This machine includes a diaphragm pump with a volume of 100 ml per stroke and a vacuum pump rate of 267 l/min. The package comes with the DOS P300-2C01 dispensing head and the flexible DOS-GP-1C01 Logic control unit. The unit is suitable for electronic control systems and offers modular, low-maintenance integration for seamless automation. Available for immediate purchase in [Location TBA].

Key data: 22 mm, 60

Single screw extruder 60 with renewed PMA control in 2010 - was replaced by double screw 5 years ago. Works after oil and belt change

connected load frequency: 230 V dimensions: 1,6 x 0,8 x 1,55 mm weight: kg Bubble wrap machine - Documentation - Includes 7 rolls of film - Like new condition See pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

UNDERWATER PELLETIZER, suitable for a variety of materials, among which PE PP PS ABS TPE, etc., up to 2.500 kg/h, Total installed power 67,14 kW, The supply includes:, Connection from your screen changer to the diverter valve, made of C45 steel heated by mica electric haters., Diverter valve heated with electric heaters This allows the flow of product to be diverted to the drain to bring the extruder up to speed, it consists of a C45 steel body with a specially perforated plate that diverts the flow to the outlet or die. This plate slides via a position-controlled hydraulic cylinder, operated by a hydraulic power unit complete with high-pressure hoses. Pressure and product temperature control probes are also included., Cutting unit consisting of: electrically heated die adapter/diverter valve; AISI304 granulation chamber; die with hard metal inserts, heated by electrical heaters; auger h ...

Features: Volume 2880 L Operating pressure 2 bar Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Overall height 2650 mm Height 1400 mm Diameter 1400 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description: Operating temperature 20 °C Topsoil: Clapper bottom 2 crane eyes T-piece with CIP line and pressure relief valve CIP Ball Tank cylinder: Level measurement at the top Manhole 350x450 mm Ladder hoes Flange Underbody: Clapper bottom 2 x drain in subfloor 4 trumpet feet, height-adjustable, with washers

All-Fill Series 200 Twin Head Automatic Filling machine Find more here - / Contact us at -

Key data: 4 m³/h, 3000 kPa, 2 kW

TEKA Filtercube 2N used Compact filter and extraction unit in welded sheet steel construction with automatic cleaning by counter-current compressed air pulses. Suitable for fume extraction in laser, plasma and oxy-fuel cutting, blasting, welding, grinding and powder coating. Technical data: Year of Make: 2008 Serial Number: 5559210011001 Motor power: 2.2 kW Nominal volume flow: 2,000 m³/h 2 pcs cleaning valves, individually controlled Compressed air requirement: 6 bar, dry and oil-free with 50 standard litres per pulse at max. 4 pulses per minute Raw gas inlet: 250 mm Width: 800 mm Depth: 1,000 mm Height: 2,100 mm Weight: 300 kg

General SKU226N154 MakeG. Ferrari Fils SPRL Brussels TypeMelangeur en V No.97172 Year of construction1997 LocationBarneveld Main Features MaterialStainless steel Volume1400 Ltr. Specified Features - Tumbler mixer V-type tumbler mixer(1x) Capacity1400 ltr Diameter800mm Outletdia. 200mm With brake motor1,5 kW With variable speed drivecheck With safety gatescheck MaterialStainless steel 1.4301 (304) Information With switchgearcheck Floorspace4,5 x 2,3 M Total height4,0 M Weight2200kgTumbler mixersG. Ferrari & FilsMixers > Tumbler mixersBrand > G. Ferrari & Fils What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

An automatic meat tenderizer roller tenderizer Metalquimia is available. Design: needle-/roller, theoretical throughput capacity: approx. 8500kg/h, machine dimensions X/Y/Z: approx. 2000mm/1300mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible.

General SKU222W212 MakeDidier Filtertechnik GmbH No.2190 Year of construction2011 Mounted on legscheck and wheels Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume700 Ltr. Motor2.2 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors Reactorcheck Capacitynetto ±550 Ltr. (bruto 700 Ltr.) Vessel sizesDia. 900x1300 mm Dished bottomcheck Dished top sidecheck Top connectionsDia. 50 mm (4x) OutletDia. 30 mm With jacketcheck jacketed outlet valve Half coil jacketedcheck 12 Ltr. Max. temperature110°C With propellor stirrercheck Motor2,2 kW, 220/380 volt, 1400/571 rpm Speed mixing shaft571 rpm Information LocationBarneveld Floorspace1,0x1,0 m Total height3,15 m Weight600 kg ATEX compatiblecheckStainless Steel ReactorsDidier Fi ...

General SKU269X293 MakeCollin TypeTeach-line E20T and BL50T No.9120 3914 Year of construction2014 LocationBarneveld Main Features Motor9 KW Inlet diameter30 mm L/D25 Specified Features - Single screw extruder MaterialStainless steel Single screw extrudercheck Screw diameter20 L/D25 Number of heating zones:2 Electric heatingcheck Air coolingcheck DC-motor1,1 kW, 400 volt, 1400 rpm Feeding with hoppercheck Max. temperature300°C Information With switchgearcheck Floorspace0,85x0,65 m Total height0,70 m Weight100 kg CEcheck Extra SpecificationsWith Teach-line film blowing line, type BL50T, dia. Take off rolls, 50 mm, roll width 200 mm, max bubble dia. 110 mm, speed 13 m/min, : winder dia. 52 mm, max pulling force 95N, max coil dia. 300 mm : Single screw extrudersCollinExtruders > Single screw extrudersBrand > Collin What you can expect from Foeth: -- Machine is ...

General SKUR0226 MakeLuco Technic GmbH (D) LocationBarneveld TypeBulk material emptying and filling station Main Features MaterialStainless steel Inlet diameter350 mm Specified Features - Bag dump station MaterialStainless steel Bag dump stations Screw diameter350mm Pitch200mm Shaft diameter90mm Screw length1200mm With hoppercheck Hopper sizes950x1100mm Inlet950x1100mm Outlet650x800mm With motorcheck Information No.886 Year of construction1991 Mounted on legscheck Floorspace2,2x1,7 M Total height3,9 M Weight1950 Kg Extra SpecificationsDevice for cutting flexible containers containing fungible material Abstract: Apparatus for cutting bags containing tricklable materials, as well as for separating the goods from bag parts, with a sieve drum and separate outlets for the bag parts, oversized particles, and the goods to be discharged, comprising a bag guidance with ...

Used Used Tangential Filter System Permeare: Year: 2010 Condition: Good Used Tangential Filter System Permeare: Model: Permawine mini Pressure: max 10 BAR Year: 2010 Speed: up to 4000 L/H Code: P 21 More details: https://bottlingscout.com

Cone Ice Cream Filler — Machine Description, This industrial Cone Ice Cream Filler is a purpose-built, high-efficiency production machine engineered for automatic filling of pre-formed ice cream cones. Designed for use in commercial frozen dessert facilities, the system delivers precise, hygienic portioning and consistent presentation, even with soft-serve, artisan, or premium ice cream products., Constructed with robust, food-grade stainless steel and sanitary components, the machine supports continuous high-speed operation while ensuring optimal product handling. The precision dosing mechanism gently fills each cone to the exact weight or volume specification, minimizing giveaway and reducing waste., Featuring a smooth indexing conveyor and adjustable fill heads, this filler is ideal for both medium and large-scale production lines. Its design integrates easily into existing workflow ...

Manufacturer: Macchi Year of Manufacture: 2012 Machine Type : 3-layer co-extrusion blown film line Condition: Good working condition, currently in production Materials LLDPE, LDPE, LLD, HDPE Extruders - Configuration: 65 mm + 80 mm + 65 mm (3 extruders) - Heaters: Infrared - Filtration: 3 plate filters Die Head - Type: 3-layer blown film die head - Reference: TE5303-IBC-350/500 - Die diameters available: 350 mm and 400 mm - Die gap: 1.8 mm - Internal Bubble Cooling (IBC): yes Output - Maximum output: up to 800 kg/hour depending on material formulation Air Ring - Type: Dual flow air ring, carbon fibre construction Take-Off Unit - Take-off width: 2400 mm - Nip type: Oscillating - Side gusseting: motorised Rewinder - Type: Double winder, fully automatic back-to-back rewinder - Roll change: fully automatic - Maximum reel diameter: 800 mm - Winding width: 2350 mm Accessories ...

Overview  This oil separator was manufactured in 2009 by the German company Donaldson Filtration GmbH. The UFA-AC0016M model was part of a compressed air installation operating with two Atlas Copco GA132 VSD low-pressure compressors. The unit is still installed and connected, has been maintained regularly, with the latest maintenance completed in August 2025, and is immediately available for sale. It can be visited on request. Technical data  Air operating pressure: 5.5 – 8.5 bar Water operating pressure: 3 – 5 bar Condensate operating pressure: up to 10 bar Operating temperature: 4 – 70 °C

Used Used Filling Monoblock Polaris 2.500 bph: Year: 2011 Condition: Good Used Filling Monoblock Polaris 2.500 bph: Model: b3000 Year: 2011 Speed: 2.500 bph 20 filling valves Product: vinegar, balsamic vinegar and similar products, creams and thick products Direction: linear Number of heads: 2 Type of cap: flip top, aluminum metallic, Push synthetics Type of capsule: PVC shrink caps Type of label: Three-station linear adhesive Number of stations: 3 Number of labels: 3 labels: front, back and collar; Paper and plastic Safety protections Code: QT 704 More details: https://bottlingscout.com

Luwa SMS GmbH LN-0200 - Vertical Thin Film Evaporator consist of a cylindrical, vertically-arranged body with heating jacket. A rotor inside the body is equipped with rows of pendulum blades along the full length of the dryer., Special thin-film evaporator designed for dairy service, discharge system, vapor pipe, condenser, and drives. It was in used as a pilot plant on a dairy service until early 2001 and afterwards converted to a 2 square metre cheese base processor with discharge system and ran till 2025 in a Casein plant in a dairy factory in New Zealand., The vertical thin film dryers operate as follows: The wet feed is spread by the pendulum blades in a thin layer onto the heated wall. During this process, the volatile components evaporate continuously out of the product layer at high evaporation rates. The pendulum blades are designed with a minimum gap to the heated wall to preve ...

Air cushion cushions or air cushion bags are a particularly space-saving and clean packaging solution. Fill-Air air cushion packaging systems offer a variety of fast, easy-to-use systems that deliver air-filled cushions on demand. They provide excellent protection and efficient void filling while simultaneously reducing material and shipping costs. -Weight: 42 kg

Air cushion cushions or air cushion bags are a particularly space-saving and clean packaging solution. Fill-Air air cushion packaging systems offer a variety of fast, easy-to-use systems that deliver air-filled cushions on demand. They provide excellent protection and efficient void filling while simultaneously reducing material and shipping costs. -Weight: 32 kg

Manufacturer: R & R Filteranlage, Type: RRFHS-650-JET, Year: 2009, Filter system - negative pressure: yes, Volume flow rate m³/h: 78.000, Filter surface in m²: 651,44, Qty. filter hoses: 324, Hose diameter in mm!: 160, Length of filter tubes: 4.000, Number of filter filter gallerys: 4, Return air capable: yes, Cleaning of scavenging air: yes, Star feeder: RTZ 100, Screw conveyor: yes, Number of fans: 5, 1st transport fan - bunker kW: 7,5, 2nd Exhaust fan kW: 37, 3rd Exhaust fan kW: 37, Suction pipe diameter 3 mm: 37, 5th extractor fan kW: 37, Container connection: möglich, FREE TEXT: Aufstellmass 4400 X 4400 mm + Ventilatoren Einhausung 4000 X 4000 mm, Year :2009

General SKU290P488 LocationBarneveld MakeHeinkel Aktiengesellschaft (DE) TypeHF 600 No.1083/11 Main Features MaterialStainless steel Motor22 KW Inlet diameter600 mm Specified Features - Basket centrifuge Basket centrifugeInverting filter centrifuge Rubber linedTFE Capacity52 Ltr Basket sizesdia.600mm x220mm Max. loading weight65 KG Liquid outlet125x125mm Hydraulic drivefor discharge With hydraulic unitcheck Motorfor rotation 22 KW, 400 Volt (EExde IIC T4) Max. basket speed1936 rpm Max. temperature100 degr.C, MaterialStainless steel 1.4571 (316Ti) Information Year of construction1988/2003 With switchgearcheck Floorspace3,0x1,0 M Total height1,5 M Weight2700 KGBasket centrifugesHeinkelCentrifuges > Basket centrifugesBrand > Heinkel What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to a ...

MANUFACTURER: Trepko TYPE: XPG 40 MOULDS: 200- 250 Gr Bricks CAPACITY: 80 pcs per minute DESCRIPTION: Trepko XPG 40 Butter forming and wrapping machine 250 gram butter bricks with capacity 4800 pcs per hour. APPLICATION: Butter, Margarine and similar high viscousity products. PRICE: Please contact Used butter machines for sale, used butter packing machines, used butter wrapping machine for sale, used butter form fill seal machine, trepko butter machine, benhil butte packing machine, margarine packing machine, butter foil wrapping machine, margarine foil wrapping machine, used dairy machinery for sale, used dairy equipment for sale, used dairy machines for sale,

PLC / Microorganism Enumeration System BIOMERIEUX TEMPO READER + 2 x FILLER Year of manufacture: 2020 TEMPO is an automated platform for the analysis of quality indicators. Composition: 1 TEMPO READER module 2 TEMPO FILLER modules With accessories: 2 Intel Core I3 computers 1 barcode scanner. Software Cables Numerous white plastic supports Untested equipment

BIOMERIEUX TEMPO READER + FILLER PLC TEMPO is an automated platform for the analysis of quality indicators. TEMPO READER TEMPO FILLER With accessories: 2 Intel Core I3 computers + screens + keyboards 3 barcode scanners (2 Xenon 1900 + 1 Voyager 1250g). Software Cables Numerous white plastic supports Untested equipment

CHRIST PACKING SYSTEM WRAPPING MACHINE FILMTEQ 3030 Fully automatic wrapping machine with innovative sealing unit with automatic spindle locking, for secondary packaging of products using polyethylene film. Modular configuration for integration with other machines and systems, with ergonomic balcony technology for quick format changeover. Ideal for industrial applications that require efficiency, accuracy and adaptability. Built in 2015. CHARACTERISTICS - Production: up to 60 cycles/minute - Wrapping material: Low-density polyethylene film (LDPE) - Packaging type: Single band wrap, with side shrink, or full wrap - Film width: From 30 mm to 300 mm - Maximum reel diameter: 400 mm - Grouping dimensions: (L): 60–400 mm/(W): 60–240 mm/(H): 30–230 mm - Single product dimensions (with stacker): (H): 15–400 mm/(W): 15–90 mm/(H): 60–240 mm ENERGY ...

Ward Bekker Auger Filler Stainless frame, 25Kg stainless agitated hopper, 35mm diameter screw, with foot pedal, mobile, 3Ph

Bread roll line WP Kemper Quadro Filius Year of Make: 2012 Weight range: approx. 25 to 360 g 1 to 6 rows of operation (depending on the cutting rollers) TA up to 180 Output approx. 1,400 to 4,000 pcs/h Max. 320 kg dough/h Dimensions LxWxH: 271 x 75 x 180 cm Power requirement: 230 V Compressed air 6-8 bar Incl. 1x cutting roller (3-row), 1x punch

General SKU050C545 MakeBHS Sonthofen GmbH TypeAutopress AP-500/14/20/VA No.F-00946-305-01 ATEX Year of construction2005 LocationBarneveld Specified Features - Filterpress Material finishMirror polished inside Pressure Working pressure12 Bar Main Features MaterialStainless steel Pressure12 Bar Surface4.7 m2 Filterpresses Filter pressGas-tight, fully automatic filter press(1x) Filter surface4,76 m2 Stainless steel plates(1.4404) Number of platens14, dia. 510mm Cake capacity52 l, Max. Temp. -30/+200 Degr. C. Hydraulic closingcheck With hydraulic unitcheck Motor4,0 KW, 400/690 Volt (Ex) Automatic openingWith hydraulically operated scraper MaterialStainless steel 1.4552, Stainless steel 1.4306 (304L) Information Floorspace3,6 x 1,5 m Total height3,7 m Weight4000 kg CEcheck ATEX compatiblecheck Extra SpecificationsBHS Autopress filters are discontinuous, fully  ...