fiat hitachi used for sale

Maximum wheel diameter 32mm power 420Watt; RPM 10,000 rpm; Chuck size 6mm; length 392mm; Weight 1.8 kg

920 Watt

920 Watt

Key data: 250 mm, 400 mm, 210 mm

Inv. Num. : 2399 Type: 254Y/FF3 Producer: HITACHI Created: 2004 Parameters: Max. travel length of the X-axis: 250 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 210 mm Feed length in the U-axis ( -): -100 mm Feed length in the V-axis ( -): -100 mm Rapid traverse X/Y/Z: 1500 mm/min Max. workpiece dimensions: 600x400x210 mm Max. workpiece weight: 400 kg

920 Watt

Parameters: 250 mm, 400 mm Manufacturer: HITACHI Year of manufacture/SO/GO: 2004/-/- Description: Machine is in good technical condition, can be tested under power.

Type: Hitachi 355R Year of manufacture/SO/GO: 2000/-/- The machine is in good technical condition, can be tested under power.

Key data: 410 mm, 260 mm, 210 mm

Inv. Num. : 6039 Type: 254Y Producer: Hitachi Created: 2004 Parameters: Control System: MARK-10W Feed length X-axis: 410 mm Feed length axis Y: 260 mm Feed length axis Z: 210 mm Axle U: 200 mm Axis V: 200 mm Wire diameter: 0.25 mm Max. workpiece dimensions: 680 x 520 x 210 mm Max. workpiece weight: 410 kg

Rotary hammer, chisel hammer, combination hammer, Bosch hammer, impact drill, chisel hammer -Manufacturer: Hitachi, rotary hammer type DH 25V with carrying case -Rated consumption: 600 W -Drilling/impact drilling -Speed: 0 - 800 rpm -Drilling capacity: steel 13 mm / concrete 25 mm -Dimensions case: 445/340/H170 mm -Weight: 10.3 kg

Cup grinder, swivel arm grinder, carbide chipbreaker groove grinder, tool grinder, grinder, angle grinder, lathe tool grinder -Grinding head: swiveling -Clamping table: 410 x 410 mm -Magnetic disk Hitachi: 470 x 160 mm -Abrasive tool diameter: 90 mm -Dimensions: 1440/760/H1745 mm -Weight: 712 kg

Tie rod cylinders, hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder comes from: a Hitachi Seiki HC400 machining center -Piston: Ø approx. 35 mm -Piston rod: Ø 16 mm -Stroke: 440 mm -Dimensions: 44/44/H610 mm -Weight: 3.6 kg

PLC, PC, control, position controller, Hitachi Seiki, HC400 -The PC comes: from a Hitachi Seiki HC400 machining center -Manufacturer: Sanyo Denki -PC type: APC-9-203-1 -Dimensions: 300/150/H160 mm -Weight: 3.6 kg

Axis control, electronic handwheel, control unit -The electronic handwheel was removed from a CNC machining center make: Hitachi Seiki type: HC400. Other spare parts available. -electronic handwheel for Hitachi Seiki type: HC400 -Dimensions: 170/120/H80 mm -Weight: 0.6 kg

Tool changer chain, chain magazine, tool changing system, tool magazine -The tool changer was removed from a CNC machining center make: Hitachi Seiki type: HC400. Other spare parts available. -Tool changer for: Hitachi Seiki type HC400 -complete with: gripper arm and drive -Tool change positions: 80 -Admission: SK -Dimensions: 2270/630/H1725 mm -Own weight: 860 kg

PLC, control panel, operator panel, control machine -The front of the control panel comes from: a Hitachi Seiki type HC400 machining center -Manufacturer: Hitachi Seiki -Control: FANUC -Dimensions: 400/310/H100 mm -Weight: 3.8 kg

Servo Amplifier Module, CNC Control System, plug-in card, -Control comes from a Hitachi Seiki type HC400 machining center -Manufacturer: FANUC -Type: A06B-6058-H334 -Dimensions: 450/250/H180 mm -Weight: 9.6 kg

AC Spindle Servo Unit, Servo Amplifier Module, CNC Control System, plug-in card, converter device, -Control comes from a Hitachi Seiki type HC400 machining center -Manufacturer: FANUC -Type: A06B-6055-H108 -Dimensions: 310/500/H300 mm -Weight: 35 kg

Servo Amplifier Module, CNC Control System, plug-in card, -Control comes from a Hitachi Seiki type HC400 machining center -Manufacturer: FANUC -Type: A02B-0094-B502 -with: 7x plug-in cards -Dimensions: 560/400/H255 mm -Weight: 12.2 kg

Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Hydraulic unit comes from a Hitachi Seiki type HC400 machining center -Motor: 2.2 kW 1420 rpm -Max. approx. pressure: 45-140 bar -Max. approx. liter output: 2.1-11.8 l/min -Hydraulic tank: 50 liters -Pressure relief valve: 1 -various valves -Dimensions: 440/665/H615 mm -Weight: 145 kg

AC spindle motor, electric motor, DC motor, servo motor -Spindle motor comes: from a Hitachi Seiki type HC400 machining center -Manufacturer FANUC Model 10S Type: A06B-0315 -Power kW -Speed: 2000 rpm -Shaft: Ø 35 mm -Construction: B14 -Number: 3x motors available -Price: per piece -Dimensions: 430/174/H174 mm -Weight: 28 kg

AC spindle motor, electric motor, DC motor, servo motor -Spindle motor comes: from a Hitachi Seiki type HC400 machining center -Manufacturer FANUC Model 6 Type: A06B-1006-B700 -Power: 5.5/7.5 kW -Speed: 1500/6000 rpm -Shaft: Ø 32 mm -Construction: B14 -Brake -Dimensions: 700/260/H250 mm -Weight: 65 kg

Hitachi CT Type: Eclos 16 slice with only 119 000 scan / Disassembled / Location : Koblenz

Hitachi horizontal spindle machine tools, FANUC cabinet, type 16M, travels: X axis 820mm, Y axis 800 mm, Z axis 800mm, with 4th additional axis: B axis circular table 360 ​​degrees. Automatic tool changer with 90 tool locations, BT50 tool cone, 2-compartment pallet changing system, pallet dimensions 630 mm x 630 mm, max. 500 mm, tool weight max. 25 kg, spindle power 40 KW, max. speed. spindle rotation speed 10000 rpm, cooling system, central coolant supply.

Used production line for packaging juices. The line consists of: - TRIBLOCK ARROW PET 9/9/3, NC9 SCRUBBER (9 GRIPPERS) , NEPFILLER (9 POURERS), CAPPER (3 HEADS) STM 2014 - BUFFER TANK 1000L STM 2014 - CIRCULATION TANK 80L STM 2014 - PUMPS WPS 4 - 2 PCS, RETURN PUMP CIP WPS 6 1 PCS STM 2014 - NUT FEEDER BCF1 STM 2014 - AIR CONVEYOR SET STM 2014 - PLATE CONVEYOR SET STM 2014 - ROTARY COLLECTING TABLE STM 2014 - PET BOTTLE ORIENTATOR SB6000 STM 2013 - SCREW CAPPER ZB 6000, NUMBER OF HEADS 6, OUTPUT 6000/HOUR STM 2013 - PRINTER HITACHI INK JET UX HITACHI 2016 - LABELLING MACHINE EC-09/ LABELER EC-09 BIENKOWSKI 2018

RACUPACK CATAMARAN WRAPAROUND CASEPACKER BOX PACKING YEAR 1999 Machine for rebuilding or for parts. Year: 1999 Serial No. 499155 Glue Unit: Nordson 3100V-2EAT4D/ JR4 PLC: Siemens S7 Inverters: Hitachi Machine Dimensions: 3750 x 3050 x 2420 Electrical Supply: 220/380V ac 50Hz, 8kW

Hitachi LaChrom Elite L 2455U Ultra DAD Hitachi LaChrom Elite 2455Z Diode Array Detector, Measuring range 190-900 nm Standard measuring cell 3.2 μl Automatic wavelength calibration

Rotation diameter max. 360mm Turning length max. 500mm Seiki Seicos A 10L control maximum rotation diameter 450 mm main spindle: Speed range - main spindle 30 - 4,000 min/-1 Drive power - main spindle 11 / 15 kW Spindle assembly A2-8 maximum usable bar diameter 65 mm maximum spindle diameter 255 mm Distance spindle center - plane 1.015 mm racing: x-axis 265mm z axis 530mm C axis 360 Tool turret: Number of tool positions 10 pos. Outer diameter 25mm Inner diameter 32mm Type QCT / KV 40mm Tool holder no. 40 QCT Tool magazine: Number of tool places 12 pos. Maximum tool size 50 x 80/200 mm Maximum tool weight 6.0 kg Driven tool stations: Number of motorized tool stations 5 stations. Speed range - driven tool stations 100 - 3,000 min -1 Drive power - driven tool stations 5.5 / 2.2 kW Counter spindle equipped with C axis. Excellent supply of driven tool holders.

Aseptic Production and Filling Line for Non-Carbonated Drinks 2500 bph This production line is designed for the preservative-free production and bottling of all kinds of heat-treatable, non-carbonated soft drinks, e.g. vitamin drinks, filtered/low-fiber juices, tea-based drinks (brewed from real leaves), plant-based milks/drinks, etc. This line is used for green tea based drinks, flavoured with various fruit juices. Production equipment includes two tea brewing vessels, mixing tanks, UHT pasteurizer, product filter, water treatment plant with reverse osmosis, oxygen generator and product tank which are the part of the delivery. UHT pasteurizer is heated with thermal oil boiler. The filling line is semiautomatic (blow moulder operation, empty PET bottle feeding and palletizing is made manually). Current owner designed the line from individual machines and rebuilt aseptic filling block ...

ID2652 Putzmeister HM25 AZ 24/100 year approx. 1995 approx. 1210 hours/hours Mobile Concrete pump Putzmeister HM25 AZ 24/100 on tracks (25 t Atlas undercarriage), approx. 24 m boom, radio remote control, wired remote control, approx. 60 -70 cbm pump capacity, Iveco/Fiat 6 cylinder suction engine Mobile concrete pump Putzmeister HM25 AZ 24/100 on tracked suspension (25 t Atlas undercarriage), approx. 24 m design, radio remote control, wired remote control, approx. 60 -70 cbm pumping capacity, Iveco/Fiat 6 cylinder naturally aspirated engine

HITACHI RCUE50CLG Brand:HITACHI Type:RCUE50CLG Stock number:M23-4664 Cooling capacity:145 kW Refrigerant:R407C Refrigerant Content:1 kg Voltage:400 Volts Power consumption:42,4 kW Dimensions:1088 x 935 x 1343 mm Weight:680 kg Year:2009 New/unused Number in stock:1 piece(s) Price:On request I Description: New unused Hitachi split chiller with 1 screw compressor. Mentioned capacity at a water temperature of +12/7°C and a condensation temperature of +45°C. This split chiller is without a condenser. We can offer a suitable condenser on request. Visit our website: used-refrigeration

Machine details: Built in Turin, Italy – Approx 1940s/1950s by Federation Industrial Metallico Torino (FIMT) who then branched out to cars becoming Federation Industrial Automobile Torino (FIAT). Dimensions: front to back 140 cm. 70 cm wide. 160cm high. The roaster does need a bit of work as not currently in working condition. It required the pulleys looking at and the chain tension. The motor also needs attaching to the back. The new gears on the lower back cost over £500 made specifically for this roaster 6/7 years ago. It produces a fine roast and is very simple to use.

Key data: 320 mm, 250 mm, 160 mm

Inv. Num. : 7379 Type: H-CUT 203M20 Producer: HITACHI Created: 1995 Parameters: Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 160 mm

Inv. Num. : 5124 Type: 254Z Producer: Hitachi Created: 2003 Parameters: Control system: FANUC Table length: 400 mm Table width: 250 mm Maximum workpiece length X: 400 mm Maximum workpiece width Y: 250 mm Maximum workpiece height Y: 210 mm Equipment: Manual control List

Inv. Num. : 6099 Type: 203 Y Producer: Hitachi Created: 2002 Parameters: Hours: 39801 h Max. travel length of the X-axis: 330 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 160 mm Machine weight: 300 kg

Description: Composed of: HITACHI DVD player Twin 1001 COSAT TV satellite receiver NR DAEWOO DSR 2000 stereo Approx. Onsite Dimension. (l x w x h): 450 x 300 x 200 mm, weight approx.: 10 kg

Description: Diverse models ,for: SCANIA, VOLVO, MERCEDES, FIAT, IVECO trucks. ,  , Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 500 mm, weight approx.: 500 kg

Single-station machine for containers up to 1.5 ltr. Extruder 60/20D with DC motor and Hitachi frequency converter. Double head 100 mm stitch with WDS. Cold separation. Waste punch, old pneumatic valves replaced by Festo valves. No oil or air leaks. Good condition, immediately free

Engine Brand: FIAT-IVECO, Conditie: CORE, Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 300 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/104117, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: 8281-22; Transport weight [kg]: 1800

Description: Composed of: HITACHI RAC-25SXB thermo convector HITACHI air conditioner Remote control Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 800 mm, weight approx.: 50 kg

Description: • Lot of 6 variable frequency drives • It includes: • 3 x HITACHI L100-005 NFE drives • 2 x HITACHI L100-002 NFE drives • 1 x STÖBER FDS4024/B drive Approx. Onsite Dimension. (l x w x h): 800 x 600 x 350 mm, weight approx.: 25 kg

Description: 3 pull-outs, contents ,sandpaper, 1 hammer drill HITACHI VRV-16, 1 orbital sander FESTO, hot air gun ,MAKITA HG 6031 V Approx. Onsite Dimension. (l x w x h): 800 x 400 x 800 mm, weight approx.: 50 kg

Description: 16 ton HITACHI ZX160 Excavator (3293) Engine: IZUZU Power: 74kw at 1.950/min Maximum Power: 81kw at 2.150/min 22.175 hours PIN: HCMBCC00C00010780 Approx. Onsite Dimension. (l x w x h): 8,640 x 2,490 x 2,880 mm, Motor manufacturer: IZUZU, weight approx.: 16,000 kg

Description: 13 ton HITACHI ZX130 Excavator (3281) Engine: IZUZU Power: 63kw at 1.950/min Maximum Power: 66kw at 2.150/min 20.900 hours PIN: HCMBCB00E00200905 Approx. Onsite Dimension. (l x w x h): 7,610 x 2,490 x 2,890 mm, Motor manufacturer: IZUZU, weight approx.: 12,600 kg

Table length: 5000 mm Table width: 2130 mm Longitudinal X: 4300 mm Cross Y: 1200 mm Vertical Z: 1460 mm Positions ATC: 30   CNC Brand: Hitachi Seiki Bed type milling machine ANAYAK - HVM 5000 DUO X-Axis:               4300mm Y-Axis:               1200mm Z-Axis:               1460mm Table Length:         5000mm Table Width:          2130mm Table load:           40000 Power on spindle:     22/30kW Spindle speeds:       60 - 3000Rpm Spindle Taper:        50ISO/Bt/Mk Feed rate X-Axis:     10000mm/min. Feed rate Y-Axis:     10000mm/min. Feed rate Z-Axis:     10000mm/min. Millingh ...

Description: 16 ton HITACHI ZX160 Excavator (3292) Engine: IZUZU Power: 74kw at 1.950/min Maximum Power: 81kw at 2.150/min 20.379 ,hours PIN: HCMBCC00T00010613 Approx. Onsite Dimension. (l x w x h): 8,640 x 2,490 x 2,880 mm, Motor manufacturer: IZUZU, weight approx.: 16,000 kg

Description: HITACHI ZX280LCN Excavator (3313) Engine: IZUZU Power: 136kw at 1.800/min Maximum Power: 140kw at 1.900/min 17.700 hours PIN: HCMBFK00C00030111  , Approx. Onsite Dimension. (l x w x h): 10,290 x 3,000 x 3,170 mm, Motor manufacturer: IZUZU, weight approx.: 27,800 kg

Description: 13 ton HITACHI ZX130 Excavator (3294) Engine: IZUZU Power: 63kw at 1.950/min Maximum Power: 66kw at 2.150/min 19.793 hours PIN: HCMBCB00J00200930 Approx. Onsite Dimension. (l x w x h): 7,610 x 2,490 x 2,890 mm, Motor manufacturer: IZUZU, weight approx.: 12,600 kg

Description: 13 ton HITACHI ZX130 Excavator (3296) Engine: IZUZU Power: 63kw at 1.950/min Maximum Power: 66kw at 2.150/min 20.237 hours PIN: HCMBCB00V00201143 Approx. Onsite Dimension. (l x w x h): 7,610 x 2,490 x 2,890 mm, Motor manufacturer: IZUZU, weight approx.: 12,600 kg