fanuc a06 used for sale

Control Fanuc Travels X / Y / Z: 520 x 370 x 410 mm Travels U / V: 120 x 120 mm cooling unit

Welding robot FANUC R-2000iA/165F Built: 2001 Control: CNC R-J3iB 6-axis Max arm area: 2 650 mm Max payload: 165 kg Country of origin: Japan You can buy the robot without the welding head

Welding robot FANUC S-430iW Built: 2000 Control: CNC R-J3 6-axis Max arm area: 2 643 mm Max payload: 165 kg Country of origin: Japan You can buy the robot without the welding head

Two little used Fanuc robots with tools and R-J2 controller. Working condition disabled from use. We can check hour counters. For example spareparts or use.

number of controlled axis: 6 workpiece weight: . kg throat: . mm Control: System R-J Number of working hours: 38217 h total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16-W Technical data Max. dimensions of work piece: Length: 650 mm Width: 420 mm Height: 160 mm Table load max.: 250 kg Longitudinal traverse (X-axis): 320 mm Cross traverse (Y-axis): 110 mm Vertical travel (Z axis): 180 mm U axis: 120 mm V-axis: 120 mm Rapid traverse:: 900 / 450 mm/min Total volume of dielektric: 260 l Voltage 50 Hz 3x: 400 Volt Total power required: 11 kVA Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1800 mm Width: 1600 mm Height: 2000 mm

Workpiece weight: 0 kg Number controlled axis: 0   Workpiece diameter minimum: 0 mm Revolving radius maximum: 0 mm (1) Single / (2) Double gripper: 1   MACH-id     5482 MAKE         FANUC + ROFIN TYPE          S- 420 iF & SM 2000

FANUC M6IB 6S (year 2006) Available: (1) M16IB + FANUC SYSTEM R J3IB Controller + console (1) M16IB + FANUC SYSTEM R J3IB Controller The FANUC M-6iB/6S is a short arm for tight, confined spaces. The robotic arm of the M6iB/6S RJ3iC is used to treat products where parts sizes and envelopes are of little concern. The M 6iB/6S can perform acute, lightweight material handling with a repeatability of +/- 0.08 mm and a maximum payload capacity of 6 kilograms. Robot Specifications Axes: 6 Reach: 900mm Repeatability: ±0.08mm Robot Motion Speed J1 - 200 °/s (3,49 rad/s) J2 - 200 °/s (3,49 rad/s) J3 - 260 °/s (4,54 rad/s) J4 - 400 °/s (6,98 rad/s) J5 - 400 °/s (6,98 rad/s) J6 - 720 °/s (12,57 rad/s) Robot Motion Range J1 ±170° J2 ±125° J3 ±155° J4 ±190° J5 ±140° J6 ±360°

FANUC S-420iW industrial robot was manufactured in Japan in 1996. A handling robot characterised by maximum performance and reliability has many applications in the industrial sector. The arm with a long reach of 2850 mm and a load capacity of 155 kg, together with 6 axes equipped with mechanical brakes, will meet even the most demanding challenges. The S-420i W robot has an integrated FANUC R-J2 controller, which uses advanced technology to improve and optimise overall productivity. The total weight of the machine is 1600 kg. Technical specifications of the FANUC S-420iW articulated robot - integrated controller: FANUC R-J2 - number of axes: 6 - arm reach: 2850 mm - payload: 155 kg - portable teach pendant: FANUC - motion range of robot axes J1 axis: 360° J2 axis: 142° J3 axis: 135° J4 axis: 600° J5 axis: 260° J6 axis: 720° - movement speed of robot axes J1 axis:  ...

Robot Robot FANUC typ S 430 IL // Cena 5.000 Euro

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Shaft: Ø 48 mm -Height shaft axis: 157 mm -Construction: B3 -Dimensions: 615/320/H330 mm -Weight: 128 kg

Fanuc Robodrill a-T14 iB Vertical Machining Center Machine is in excellent condition

FANUC Robodrill Alpha T14iB vertical machining center from the year 2000 currently working. It is equipped with a Fanuc 16i-M CNC control unit. The machine has a spindle speed of 15000 rpm. Machine weight: 2100 kg CNC

Machine Details Warehouse number 1105-03578 Machine Type Machining Center - Vertical StAMA ROBODRILL brand Type MC 010 Year of construction 1990 Control type CNC Storage location HAGUENAU Country of origin JAPAN Delivery time IMMEDIATELY Freight base from stock Technical details x-travel 500 mm y-travel 380 mm z-travel 300 mm Spindle holder ISO 30 sk sa Clamping surface 650 x 380 mm Tool magazine with 10 seats Tool change time 5 sec workpiece weight 200 kg Speeds - autom. switchable 60 - 8000 rpm Feed speed 1 - 4095 mm/min Feed force 400 kp (X, Y) Feed force 1000 kp (Z) Rapid traverse speed 36 m/min (X, Y) Rapid traverse speed 30 m/min (Z) Information Equipped with/ Equipped with: - FANUC 0 M Control - 10-fold tool changer SK 30 - Coolant system / cooling attachment - 4 T-slots / 4 T-slots TOOLS SK 30

Vertical machining center Fanuc Robodrill Alpha T21i EL Year 2007 CNC Fanuc 31i Tool holder BT 30 Spindle power 5.5 Kw Spindle RPM 24000 HSC (high speed) yes Number of tools 21 X 700 mm Y 400 mm Z 330 mm Rapids X Y Z 54 m / min Table dimensions 850 x 410 mm Fourth axis Kitagawa MOD. MR200 Flange diameter 200 mm Continuous rotation, 360000 positions Renishaw TS27R presetting DIMENSIONS AND WEIGHT Length 2115 mm Width 2027 mm Height 2336 mm Weight 2100 Kg Under power in our warehouse - test possible Mimu Machine Tools (Italy) Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several axles of motion and a automatic tool exchange system and sometimes multiple pallets, Spindle speed RPM: 24000

Vertical machining center FANUC Robodrill Alpha T21iC 2002 ISO30 14 tools 8000 RPM X 500 Y 380 Z 300 CNC Fanuc 16iM The machine can be inspected in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same workpiece. It is generally equipped with several axles of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 500, Y axis: 380, Z axis: 300, CNC type: Fanuc

Vertical machining center FANUC Robodrill Alpha T14iA ISO30 14 tools 8000 RPM X 500 Y 380 Z 300 CNC Fanuc 16iM The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several axles of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 500, Y axis: 380, Z axis: 300, CNC type: Fanuc

Robodrill MC 010 X-axis: 500 mm Y-axis: 380 mm Z-axis: 300 mm Admission in spindle (ISO): BT30 Control : Fanuc 16-M Toolchanger: yes Number of toolholders: 10 positions Number of rotations: 10 > 8000 rpm

For sale wire EDM fanuc tape cut - w2 Year 1989 Kept and running well available immediately for viewing

Robot Fanuc S-500iB, R-J3iB with 7th axis/motor YOC 8/2006 Control: R-J3iB Number of axles: 6 payload: 15 Kg working range: approx. 2757 mm Profibus Scope of delivery : Robot,Control,Cable,Teach panel,Instruction manual,Circuit diagrams 2 weeks commissioning warranty.No further warranty In addition, spare parts are constantly available from stock. Robot is fully functional and can be visited Ex works Freely loaded

Compact cell Fanuc ArcMate 100/7L with R30iB control, Lorch S3 pulse welder new Number of axles: 6 payload: 7Kg working range: approx. 1633 mm Year of construction: 2016 Table area each 750x500mm Overall dimensions: approx.:2500x1500x2200 Total weight: approx. 2000kg Net amount plus 19% VAT

Robot Fanuc M-20iA Year of construction: 2012 Payload: 20 kg Arm area: 1811 mm Weight: 250 kg Control: R-30iA Mate Number of axles: 6 Axis range: J1 ±370° J2 ±260° J3 ±458° J4 ±400° J5 ±380° J6 ±900°

Robot Fanuc M16iB 20 Year of construction: 2005 Arm area: 1667 mm Payload: 20 kg Control: R-J3iB Weight: 270 kg Number of axles: 6 Axis range: J1 ±170° J2 +160° – 90° J3 +290° – 170° J4 ±200° J5 ±140° J6 ±450°

Marking cell with Fanuc M-20iA / 35M robot with Rofin source Year of construction: 2017 Arm area: 1813 mm Control: CNC R-30iB Source Rofin: power line prime 12 Power Rofin: 8 w Payload: 35 kg

FANUC M-710iC/50 robotic welding machine is used to perform the pad welding process – coating the surface of molten workpieces with a layer of powder, in order to complete defects in the workpiece or to give it new features. The robotic welding machine includes: – FANUC M-710iC/50 robot – COHERENT HighLight D-Series 10kW laser head – COHERENT HightLight 10000D laser head controller – THERMACH INC. AT-1200 POWDER FEEDER powder feeder unit – RIEDEL chiller PC 321.2H6LE.I – rotary table, consisting of TAKOMAT RT400 turntable and FANUC motors The FANUC M-710iC welding robot is distinguished by its robust, completely water- and dust-resistant body and its compact dimensions, which allow it to be installed in any position on a limited amount of space. All this, combined with high axial speeds and a reach of 2050 mm, makes the FANUC M-710iC/50 robot perform perfectly w ...

General: Year of construction 2005 Type Robot M-6iB Type A05-1215-B602

good condition inspection possible video available

Manufacturer: Fanuc Year of manufacture/SO/GO: 2000/-/- The machine is in good technical condition.

Used industrial robot including control system in very good condition, Ready for immediate use Suitable for welding/spot welding, machine operation, material handling and much more. Payload: 120 kg Reach: 2413 mm Axles: 6 With its six axles, the Fanuc S-420F is capable of precisely moving heavy payloads of up to 120 kg. Due to the wide range of possible applications, there are practically no limits to the Fanuc S-420F. It offers consistent cycle times and handles heavy lifting, spot welding, and pick & place effortlessly. Absolutely professional machine from the market leader for automation FANUC - yet easy to use / program. Despite its large working area, the robot requires a comparatively compact footprint. The Fanuc S-420F RJ2 is designed for ground mounting and weighs a whopping 1600 kg. Movement Speeds: J1 90 °/s (1.57 rad/s) J2 90 °/s (1.57 rad/s) J3 90 ...

Robot Fanuc R-2000iB/210F (E-25677) Year of construction: 2006 Max Arm Range: 2655mm Control: Fanuc R-J3IC Payload: 210kg

Robot Fanuc S-430iW (E-05620) Year of construction: 2000 Max Arm Range: 2400 mm Control: Fanuc R-J3 Payload: 165 kg

Control: Fanuc CNC control FANUC 21-T with: - display unit - keyboard - Control modules (A16B-3200 and A16B-2203) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fanuc Robodrill D14LiB Plus Vertical Machining Center Machine is like new condition Table size : 850 mm x 410 mm X : 700 mm Y : 400 mm Z : 330 mm 10 pieces of tool holder, and some other tools will be given together with machine

Control: Fanuc Input Unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Fanuc AID32F1 Input Modul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Fanuc new/unused Input Unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Fanuc CNC control FANUC O-TC with: - display unit - keyboard - Control modules (A02B-0098) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Fanuc AOD32D1 Output Modul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Fanuc - Control module (A02B-0098) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Fanuc AIF01A Input Modul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Fanuc ABU05A 6-fold Base-Unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Fanuc The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control: Fanuc ? The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Robot Fanuc R-2000iB/210F (E-25699) Year of construction: 2006 Max Arm Range: 2655mm Control: Fanuc R-J3IC Payload: 210kg

Robot Fanuc R-2000iB/210F (E-25909) Year of construction: 2006 Max Arm Range: 2655mm Control: Fanuc R-J3IC Payload: 210kg

Robot Fanuc R-2000iB/210F (E-25681) Year of construction: 2006 Max Arm Range: 2655mm Control: Fanuc R-J3IC Payload: 210kg

Robot Fanuc R-2000iB/210F (E-25700) Year of construction: 2006 Max Arm Range: 2655mm Control: Fanuc R-J3IC Payload: 210kg

Fanuc Laser-model C3000 Type A04B-0811-B311 44 kVa - 130 amp Type A04B-0811-B511

x-travel: 700 mm y-travel: 400 mm z-travel: 330 mm Control: FANUC 31iB5 table-size: 850 x 410 mm : 21 fach turning speeds: 10.000 U/min Internal cooling system: 20 bar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC control in the control panel / machine operator terminal CNC web control FANUC type A14B - 0048 - 0002 Year of construction: 1990- Machine control panel - electronic handwheel - Flexible silicone PC keyboard Dimensions WxHxD: 600 x 260 x 350 mm Weight: approx. 40 kg From stock, function not tested, ideal as spare parts carrier.; used