fan coil used for sale

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -for: paint wall, paint booth -Motor: Ex protected -Motor power: 5.0 kW -Speed: 1455 rpm -Connection input: Ø 430 mm -Connection output: Ø 450 mm -Impeller: Ø 660 mm -Dimensions: 1350/900/H1240 mm -Weight: 236 kg -unfortunately no further data available

Güntner GVX 071V.1A/3-ED. E axial fan condenser Fan 500mm ⌀  Number of fans 3 Extremely quiet design  Voltage 400 V 3~ 50 Hz Year of construction: 2010 Max/Min Pressure 32bar/-1bar Max/Min Temperature -50 to + 100 degrees Volume: 29 litres  Total dimensions approx.: L:410cm D:110cm H:125 cm  Condition: Used More condensers - new and used - can be found in our shop! International shipping costs on request!

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 3.6 kW -Speed: 1415 rpm -Volume flow: m³/h -Pressure: Pa -Connection input: Ø 510 mm -Connection output: Ø 570 mm -Impeller: Ø mm -Dimensions: 1230/950/H1400 mm -Weight: 240 kg

Centrifugal fan, dust extractor fan, fan, extraction fan, dust fan, painting extractor fan -for paint wall, paint booth -Motor Ex protected -Motor power: 2.5 kW -Speed: 1450 rpm -Volume flow: 5000 m³/h -Pressure: 800 Pa -Connection input: Ø 500 mm -Connection output: Ø 450 mm -Dimensions: 1065/850/H1390 mm -Weight: 186 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow: 10,000 m³/h -Total pressure: 3500 Pa -Connection input: Ø 350 mm -Connection output: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg

Radial fan, chip extractor, fan, suction, chip fan -Motor power: 75 kW -Speed: 1480 rpm -Volume flow: approx. 40,000 m³/h -Total pressure: approx. 1600 Pa -Connection input: Ø 710 mm -Connection output: Ø 710 mm -Dimensions: 2400/1560/H2810 mm -Weight: approx. 1600 kg

Manufacturer: Piller, Type: RG 11 Vakuumturbine, Year: ca.1990, Diameter intake mm: Kw 4,75, Engine power kW: Drehzahl 7000, Flow rate approx. m3/h: war verbaut in schleifmaschine, rotations rpm: 0,42 m³/s , Direkt drive: Druckgussgehäuse, V-belt drive motor: Saugseite 100 mm, V-belt pulley impeller: Austritt 100 mm Durchmesser, Year :ca.1990

Manufacturer: Höcker, Type: K 35/250 Späneventilator, Year: 03/2004, Engine power kW: 18,5, Flow rate approx. m3/h: 5700, rotations rpm: 1500, V-belt drive motor: yes, V-belt pulley impeller: yes, Suction side mm: 250, Outlet side mm: 350, Wight approx. kg: 420, Year :03/2004

Radial fan, chip extractor, fan, suction, chip fan -Centrifugal fan in a galvanized housing, soundproofing -Motor power: 30 kW -Speed: 2920 rpm -Volume flow: 36000 m³/h -Total pressure: 1600 Pa -Connection input: Ø 800 mm -Connection output: Ø 750 x 600 mm -Dimensions: 2500/2350/H2700 mm -Weight: approx. 1500 kg

Manufacturer: Bartling, Type: Späneventilator, Year: ca.2008, Diameter intake mm: 400, Engine power kW: ca.18,5, Flow rate approx. m3/h: ca.8500, rotations rpm: 2850, Direkt drive: no, V-belt drive motor: yes, Enclosed impeller: yes, Outlet side mm: 400, Year :ca.2008

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan -Manufacturer: Ziehl-Abegg, axial fan EAC GR45G-4EK.41.2R -Engine: RH350-4EK -Power: 0,30 kW / 1330 U/min -Fan wheel: diameter 365 mm -Protection rating: IP44 -Dimensions: 430/430/H235 mm -Weight: 7.7 kg

Dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, vacuum blower, centrifugal fan, medium pressure fan -Manufacturer: Karl Klein, medium pressure fan type DMV 350 -Motor: away 1.1kW -Speed: 2765 rpm -Volume flow: 1260 m³/h -Connection input: Ø 150 mm -Connection output: 60 x 100 mm -Quantity: 5x blowers available -Price per piece -Transport dimensions: 500/485H340 mm -Weight: 30 kg/pc.

Dust extraction fan, exhaust gas extraction, heating fan, welding fume extraction, extraction, fan, vacuum blower, centrifugal fan -Manufacturer: Alko-Therm, centrifugal fan type RZR 11-355 -Motor: Siemens 0.9/3kW -Speed: 980/1450 rpm -Connection input: Ø 300 mm -Connection output: 460 x 300 mm -Dimensions: 1200/640/H670 mm -Weight: 89 kg

Extractor fan, welding fume filter, welding fume extraction, soldering fume extraction, small dust extractor, -Manufacturer: Esta, small dust extractor extraction fan for smoke extraction -Type: Esta 100 -Drive: 0.55 kW / 2850 rpm -Fan wheel: Ø 280 mm -Connection: Ø 100 mm -Volume flow: Max. 1000 m³/h -Dimensions: 425/420/H845 mm -Weight: 35 kg

Axial fan, control cabinet fan EBM PAPST W2E200-HH38-07 fan wheel: Ø 200 mm motor : 64 Watt 230 V 1AC used, tested ! Dimensions: 225 x 225 x 80 mm

Fan, fan, electric motor, blower, axial fan -Manufacturer: ebmpapst, axial fan type 4656 N -Voltage: 230V 19W -Quantity: 1x fans available -Price per piece -Dimensions: 120/120/H35 mm -Weight: 0.5 kg/pc.

Fan, fan, electric motor, blower, axial fan -Manufacturer: ebmpapst, axial fan type 4650 N -Voltage: 230V 8W -Quantity:1x fans available -Price per piece -Dimensions: 120/120/H35 mm -Weight: 0.5 kg/pc.

Centrifugal fan, centrifugal fan, centrifugal fan DAYTON Model: 4C870 fan wheel diameter: Ø 160 mm 1570 rpm 0.075 kW engine : Type U881 0.1 HP ( approx. ) 230 V 2 AC 50 / 60 Hz input: Ø 135 mm output: 131 x 108 mm used, tested ! Dimensions: 305 x 265 x 260 mm

Axial fan, axial fan, axial fan ZIEHL-ABEGG, THERMAL FE91-NDS.FE91-NDS.6F.6 209493 fan wheel diameter: Ø 900 mm 0.14 / 0.27 kW 250 / 390 rpm 400 V 3AC 50 Hz IP54 used, tested ! Dimensions: 1205 x 1105 x 330 mm

Fan, fan, electric motor, blower, axial fan -Manufacturer: ebmpapst, axial fan type 3950 -Voltage: 230V 11W -Quantity: 2x fans available -Price per piece -Dimensions: 90/90/H30 mm -Weight: 0.3 kg/pc.

Axial fan, axial fan, axial fan ZIEHL-ABEGG, THERMAL FE091 fan wheel diameter: Ø 900 mm approx. 0.91 kW 400 V 3AC 50 Hz IP54 no complete nameplate ! used, tested ! Dimensions: 1205 x 1105 x 330 mm

Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan, axial fan, axial fan, axial fan, axial fan -Manufacturer: Boge, fan from compressor type SL 270 -Fan: Ø 420 mm -Engine: Type FC80/2 -Power: 1.1 kW / 2815 rpm -Hole circle: Ø 295 x 22 mm -Total dimensions: Ø 495 x 315 mm -Weight: 13 kg

Centrifugal fan, chip extraction fan, fan, suction, chip blower, high performance fan -Motor power: 5.5 kW -Speed: 2895 rpm -Volume flow: 1060 m³/h -Connection input: Ø 200 mm -Connection output: Ø 115 mm -Dimensions: 775/1000/H1350 mm -Weight: 170kg

axial fan, axial fan, axial fan ZIEHL-ABEGG FE100-NDS.6N 6 107754 fan wheel diameter: Ø 900 mm 0.50 / 0.86 kW 310 / 420 rpm 400 V 3AC 50 Hz IP54 used, tested ! Dimensions: 1170 x 1175 x 330 mm

Fan filter, fan row, air cooler, control cabinet fan, filter fan -Manufacturer: Siemens, Simatic S 5 fan assembly from Demag D 100-275 NC injection molding machine -Type: 6ES5 981-0 HA 11 -Voltage: 230/115V -Dimensions: 490/175/H265 mm -Weight: 2.9 kg

Fan, fan, electric motor, blower, blower, centrifugal fan, emergency exhaust fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: ebmpapst, centrifugal fan radial fan type R2D190-AA04-19 -Voltage: 415V 50/60Hz 66/77W -Quantity: 1x fan available -Dimensions: 380/260/H85 mm -Weight: 2.8kg

centrifugal fan, dust extraction fan, fan, suction, dust blower -Manufacturer: Rippert, centrifugal fan in soundproof housing -Type: HL560/710-200 -Motor: 5 kW 1435 rpm -Volume flow: 12,000 m³/h -Inlet/Outlet connection: Ø 500 mm, see photos -Dimensions: 1945/1515/H2350 mm -Weight: 600 kg

Centrifugal fan, chip extraction fan, fan, extraction, chip fan, impeller -Fan wheel: for exhaust fans -Inlet connection: Ø 230 mm -Intake: Ø 38 x 80 mm -Dimensions: Ø 450 x 160 mm -Weight: 17 kg

Centrifugal fan, chip extraction fan, fan, extraction, chip fan, fan wheel, fan housing -Fan housing: for exhaust fans -Fan mount: Ø 215 mm, bolt circle Ø330 mm -Inlet: Ø465 mm / bolt circle Ø495 mm M8 -Outlet: 200 x 280 mm -Number: 2x housing available -Price per piece -Dimensions: 780/290/H820 mm -Weight: 30 kg/pc.

Centrifugal fan, chip extraction fan, fan, suction, chip fan, fan wheel, fan wheel -Manufacturer: punker, fan wheel type Vent. Wheel TLR 800x576 RD -Item No.: 795982 -Intake: Ø 50 x 110 mm -Number: 2x fan wheel available -Price per piece -Dimensions: Ø 800 x 580 mm -Weight: 49 kg/pc.

Centrifugal fan, centrifugal fan, centrifugal fan DIETZ DR 71 a/2q ( DR71a/2q ) fan wheel: Ø 200 mm 2800 rpm engine : 0,37 kW 220 / 380 V 3AC 50 Hz IP44 input ( indoor ): Ø 110 mm output ( inside ): 100 x 50 mm with airflow monitoring used, tested ! Dimensions: 375 x 285 x 670 mm

Fan Impeller, Axial Impeller WINGFAN P9TR Diameter: Ø 990 mm Necessary shaft diameter: Ø 48 mm Wavelength: 112 mm Groove width: 14 mm Hub diameter: Ø 100 mm hub length: Ø 70 mm New ! Dimensions: 9990 x 990 x 210 mm

Centrifugal fan, centrifugal fan, centrifugal fan LUFTTECHNIK GOTHA LRMN 160 flow rate: 0,2 / 0.41 m3/sec ( 720 / 1476 m3/h ) pneumatic wheel: Ø 250 mm engine : VEM KMR 71 K2R 0.55 kW 220 / 380 V 3AC 2850 rpm input: Ø 160 mm output: 140 x 140 mm New ! Dimensions: 410 x 380 x 530 mm

Standard Radiator, Car Radiator, Oil Cooler, Heat Exchanger -Manufacturer: Longer Reich, light metal oil cooler cooler -Type: unfortunately no type designation -Motor: Siemenst 0.37 kW -Pressure: max. 16 bar -Temperature: max. 120 °C -Dimensions: 560/330/H540 mm -Weight: 28 kg

Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: WMW, fan head type MTK DN 150 GL 37081-86 HH -Bolt circle Ø 238 x 22 mm -Number: 1x hood available -Price per piece -Total dimensions: 310/200/H290 mm -Weight: 35 kg/pc.

Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: WMW, fan head type MTK DN 80 GL 37081-86 HH -Flange: DIN 2576 ND10-NW80/88 -Bolt circle Ø 160 x 18 mm -Number: 5x hood available -Price per piece -Total dimensions: 310/200/H290 mm -Weight: 12.2 kg/pc.

Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: WMW, fan head type MTK DN 65 GL 37081-86 HH -Flange: DIN 2576 ND10-NW65/76 -Bolt circle Ø 143 x 18 mm -Number: 2x hood available -Price per piece -Total dimensions: 280/185/H255 mm -Weight: 9 kg/pc.

Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: WMW, fan head type MTK DN 50 GL 37081-86 HH -Flange: DIN 2576 ND10-NW50/60 -Bolt circle Ø 126 x 18 mm -Number: 8x hood available -Price per piece -Total dimensions: 230/165/H225 mm -Weight: 6.5 kg/pc.

Fan head, chamber ventilator, dorade ventilator, mushroom ventilator, ship ventilator, deck ventilator, ventilation, mushroom hood for ventilation, ventilation duct, ventilation flap, ventilation system, extraction system, ventilation ducts and fittings, multi-leaf damper, non-return damper, lamellar ventilator, mushroom hood -Manufacturer: Witt & Sohn, mushroom hood type PK wd 500 x black. vz -Hood opening: can be closed mechanically, hand wheel -Bolt circle Ø 550 x 12 mm -Number: 2x hood available -Price per piece -Total dimensions: Ø 905 x 820 mm -Weight: 89 kg/pc.

Centrifugal fan, dust extractor fan, fan, extractor, dust fan, blower -Manufacturer: Kiekens, dust extractor type QTE-280 -Motor: MEZ 4 kW 2920 rpm -Fan wheel: Ø 490 mm -Connection: inlet Ø 280 mm -Connection: outlet Ø 310 mm -Dimensions: 730/610 / H1000 mm -Weight: 99 kg

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louvre flaps, non-return flaps, lamellar fans -Ventilation flap: Louvre fan louvre flap -Ventilation flaps: mechanically adjustable, without drive -Opening 6 slats: 1170 x 510 mm -Dimensions: 1325/560 / H115 mm -Weight: 21 kg

Control unit for electric forklift, electric motor, direct current motor, traction motor, drive motor, motor control, motor controller, control, drive control, voltage converter, radiator fan, radiator, fan -Manufacturer: Linde, radiator fan from forklift Linde R14 -Dimensions: 260/150 / H80 mm -Weight: 1.0 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan, blower -Manufacturer: Airheat, centrifugal fan with soundproof housing -Type: RDH-500-11.0 -Volume flow: 20000 m3 / h -Motor: Hoyer 15 kW 1460 rpm -Dimensions: see techn. Drawing with the photos -Dimensions: 1800/1110 / H2900 mm -Weight: 584 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan, blower -Manufacturer: HVB Hansa Ventilatorenbau, radial fan type B450-1K-X / L / UX1103 -Motor: Siemens 15 kW 2940 rpm -Volume flow: 15000 m3 / h -Connection: inlet Ø 440 mm -Connection: outlet 350 x 440 mm -Dimensions: 1080/950 / H855 mm -Weight: 244 kg

Fan, fan, electric motor, blower, axial fan, duct fan -Manufacturer: Lohse, axial fan type 31JM / 16/4/5/36 S / S 3 S BT4 -Motor: 380-420 V / 1370 rpm / 100 W. -Ventilation duct: Ø 315 mm -Hole circle: Ø 355 x 10 mm -Protection class: IP55 -Number: 2x fans available -Price per piece -Dimension: Ø 395 x 360 mm -Weight: 15 kg / pc.

Axial fan, gigabox, fan, fan, electric motor, blower, high pressure duct fan, axial high-performance fan -Manufacturer/Type: unknown -Hole circle: Ø 755 x 91 mm -Price: per piece -Number: 3 pieces available -Dimensions: Ø 785 x 220 mm -Weight: 16 kg/piece

Air outlet, ventilation duct, ventilation flap for ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, shutter flap, non-return flap -Slat fan: without fan, air outlet, lateral. Slats adjustable -Connection opening: Ø 800 mm -Dimensions: 1130/1130/770 mm -Weight: 135kg

Fan, fan, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan -Manufacturer: Ziehl-Abegg, radial fan motor without fan wheel -Type: MK205-UDK.30.N -Speed: 950/480 rpm -Power: 0.66 kW -Protection class: IP 54 -Price: per piece -Number: 3 piece -Dimension: Ø 368 x 330 mm -Weight: 64 kg/piece

Electric heater, electric heater, heating coil, electric tubular heater, touchable semiconductor heater, switch cabinet heater, fan heater, fan heater, switch cabinet fan -Manufacturer: RO/SE fan heater/switch cabinet heater -Type: HH/250s -Power: 250 watts -Voltage: 220-240 V -Dimensions: 115/120/H170 mm -Weight: 1.3 kg

High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan, radial fan -Motor power: 0.139 kW -Speed: 1600 rpm -Volume output: unknown -Connection air duct: 90 x 90 mm -Price per piece -Quantity: 2 pieces -Dimensions: 280/165 / H230 mm -Weight: 3.1kg / piece