falk used for sale

General SKU309N504 LocationBarneveld MakeFalk Gmbh&Co KG No.24320 Year of construction2007 Material Shell materialStainless steel 1.4571 (316Ti) Tube materialStainless steel 1.4571 (316Ti) Pressure Working pressure shell0.49 Bar Working pressure tubes6 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface25 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Notified bodyAD2000 Heating surface25m2 Tube capacity140 Ltr Number of tubes:64 Tube diameter25,4mm Tube length5000mm Wall thickness tubes1,6mm Max. temperature60 degr.C. Shell capacity317 Ltr Shell diameter356mm Shell length5000mm Max. temperature100 degr.C. Shell connectionsdn65 Cover connections(2x)dn80 Information Mounted on legscheck Floorspace5,7x0,7 M Total height1,0 M Weight800 KGShell and tube heat exchangersFalkHea ...

General SKU309N500 LocationBarneveld MakeFalk gmbh & Co. KG No.3304 Year of construction2007 Material Shell materialStainless steel 1.4571 (316Ti) Cover materialStainless steel 1.4571 (316Ti) Tube materialStainless steel 1.4571 (316Ti) Pressure Working pressure shell1 Bar Working pressure tubes4 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface150.5 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Notified bodyAD2000 Heating surface150,5 m2 Tube capacity830 Ltr U-typecheck Number of tubes:157 Tube diameter25mm Tube length(2x)5900mm Wall thickness tubes2,0mm Max. temperature100 degr.C Shell capacity1530 Ltr Shell diameterdia.711mm Shell length6370mm Wall thickness shell5mm Max. temperature100 gr.C. Shell connectionsdn500, dn80 Cover connections(2x)dn200 Information Mounted ...

General SKU309N517 LocationBarneveld MakeFalk Gmbh & Co KG Bendorf No.3301 Year of construction2007 Pressure Working pressure shell2.5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Mild steel Surface81.3 m2 Specified Features - Shell and tube heat exchanger MaterialMild steel Heat exchangercheck Heating surface81,3 m2 Tube capacity525 Ltr Number of tubes:126 Tube diameter25mm Tube length3900mm Max. temperature100 gr.C. Shell capacity1140 Ltr Shell connections(2x( dia.150mm Cover connections(2x) dia.100mm Information Floorspace5,5x0,9 M Weight2170 KG Extra SpecificationsThe material of the shell and tubes are 1.0345 (P235GH) Shell and tube heat exchangersFalkHeat exchangers > Shell and tube heat exchangersBrand > Falk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to n ...

General SKU309N516 LocationBarneveld MakeFalk Apparate- und Rohrleitungsbau gmbh&co KG No.3305 Year of construction2007 Material Shell materialMild steel Tube materialStainless steel 1.4462 (318LN) Pressure Working pressure shell4 Bar Working pressure tubes1 Bar Main Features Shell (Material)Mild steel Tube (Material)Stainless steel Surface49 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Notified bodytuv Heating surface49 m2 Tube capacity262 ltr Number of tubes:76 Tube diameter25mm Tube length3900mm Wall thickness tubes2,0mm Max. temperature165 gr.C. Shell capacity503 ltr Shell diameter508mm Shell length4070mm Wall thickness shell6,3mm Max. temperature165 gr.C. Shell connectionsDN65, DN40 Cover connections(2x) DN100 Capacity3,9 m3 Information Mounted on legscheck Floorspace5,0x0,8 M Total height1,4 M Weig ...

Pure water unit ENVIROFALK Performance in continuous operation 15 sqm / h max 18 sqm / h CA 2 trailers full of material Year 2009 / was for 1 year in use then the production has been discontinued. complete with all documents and control New price 260.000,-€

sheet width: 1550 mm plate thickness: 6,5 mm pre-bending: 4,5 mm diameter of upper rolls: 150 mm side roll diameter: 130 mm diameter of lower rolls: 150 mm distance: max. OW zu UW 20,0 mm total power requirement: 2,2 + 1,5 kW weight of the machine ca.: 2.370 kg. range L-W-H: 3.300 x 1.200 x 1.300 mm Furnishing: - hydraulic 4-roll bending machine - separate control panel - hardened rolls SAE 1050 CK 45 - Conical bending device - 3 digital displays for exact roller positions - hydraulic folding storage The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1900 mm width: 810 mm height: 860 mm internal dimension: 1,5 x 0,74 x 0,78 Contents: 600 l The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mm plate thickness: 2,5 mm roll length: 1270 mm roll diam. toproll: 90,0 mm engine output: 1,1 kW bending speed: 6,0 m/min weight: 520 kg Furnishing: - motor-driven asymmetrical 3-roll round bending machine - hardened rollers - manual folding warehouse for quick removal of the workpiece - Profile inlets i.d. Rollers - Double foot switch for R / L run and emergency stop button - Conical bending device - rear roller manually adjustable - electr. Safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 300 mm table surface area: 1070 x 260 mm column travel between the guideways: 1070 mm ajustment speed: 8,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 5,5 kW weight of the machine ca.: 1500 kg. dimensions of the machine ca.: 2050 x 1000 x 2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 1,50 mm roll length: 1050 mm roll diam. toproll: 68,0 mm engine output: manuell kW weight: 280 kg range L-W-H: 1930 x 700 x 1160 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 15.000 kg height: 790-1350 mm width: 1200 mm weight: ~ 65,0 kg Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - with height adjustment - CE marking techn. Details: - Height: 790 mm - Width: 1200 mm - Load capacity: 15 to - Height adjustment: 790 - 1350 mm - Support surface: 120 x 120mm - Space requirement approx .: 1350 x 720 x 1350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 50 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5.000 kg height: 800 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 800 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 60 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 2,0 mm roll length: 1550 mm roll diam. toproll: 90,0 mm engine output: manuell kW weight: 560 kg range L-W-H: 2580 x 700 x 1250 mm Furnishing: - manual asymmetrical 3-roll round bending machine with hand drive - manual folding warehouse - manual delivery d. rear roller - Profile grooves: 4/6/9 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2280 mm revolutions per minute: 2880 U/min roll diameter: 140 / 80 mm table-size: 700 x 350 mm engine output: 3,0 kW weight: 250 kg range L-W-H: 1300 x 800 x 1500 mm Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mm plate thickness: 1,50 mm roll length: 1270 mm roll diam. toproll: 75,0 mm engine output: manuell kW weight: 330 kg range L-W-H: 2150 x 700 x 1160 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t stroke: 300 mm table surface area: 1070 x 315 mm column travel between the guideways: 1070 mm ajustment speed: 8,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 5,5 kW weight of the machine ca.: 1.870 kg. dimensions of the machine ca.: 2.050 x 1.000 x 2.200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t stroke: 200 mm table surface area: 775 x 190 mm column travel between the guideways: 775 mm ajustment speed: 7,5 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 3,0 kW weight of the machine ca.: 400 kg. dimensions of the machine ca.: 1.500 x 700 x 1.800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 2.000 mm height: ca. 660 - 815 mm width: 600 mm Furnishing : - stable construction - high load-stable stability - Height-adjustable feet techn. Details: - Track length: 2,000 mm - Roll width: 600 mm - Height: approx. 660-815 mm - Distance between the rollers: approx. 160 mm - Height adjustable: yes - Number of rolls: 8 pieces - Roll diameter Ø 90 mm - color blue / red The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t stroke: 300 mm table surface area: 1900 x 440 mm column travel between the guideways: 1900 mm working feed: 5,0 mm/sec engine output: 15,0 kW weight of the machine ca.: 4.800 kg. range L-W-H: 2.570 x 1.665 x 2.860 mm Furnishing: - hydraulic workshop press with adjustable cylinder - Table height adjustment - V-block tool insert - Pressure gauge The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2,0 mm tube diameter: 60,0 mm motor: 400 Volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 2.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 2 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 20 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 3.000 mm height: ca. 660 - 815 mm mm width: 600 mm Furnishing : - stable construction - high load-stable stability - Height-adjustable feet techn. Details: - Track length: 3,000 mm - Roll width: 600 mm - Height: approx. 660-815 mm - Distance between the rollers: approx. 160 mm - Height adjustable: yes - Number of rolls: 12 pieces - Roll diameter Ø 90 mm - color blue / red The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 11,0 kW range L-W-H: 2200 x 1200 x 2550 mm weight of the machine ca.: 2070 kg. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1900 mm width: 810 mm height: 860 mm internal dimension: 1,5 x 0,74 x 0,78 Contents: 600 l The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 50 mm band length: 940 mm band speed: 3 - 22 m/min turning speeds: 1450 U/min tube diameter: 16 - 114 mm radius: 180 ° total power requirement: 4,75 kW weight of the machine ca.: 265 kg. range L-W-H: 1.000x750x1.300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180 (angle). - Manual work possible without feed - CE mark / declaration of conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2280 mm band speed: 22 m/sec table-size: 700 x 350 mm roll diameter: 140 / 80 mm motor speeds:: 2880 1/min range L-W-H: 1300 x 800 x 1500 mm total power requirement: 3,0 kW weight of the machine ca.: 250 kg Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized tape oscillation approx. 10mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Output: 2000l/h, efficiency/yield: 70%, feed water pressure: 3-6bar, operating temperature 5-35°C, length: 850mm, width: 2450mm, height: 1950mm, with documentation, without storage tank, inspection is possible.

pressure: 60 t stroke: 250 mm table surface area: 1040 x 370 mm working width: 1040 mm pressing speed: 4,0 mm/sec feed speeds: 8,0 mm/sec return speed: 10,0 mm/sec total power requirement: 4,0 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 1,7 x 0,7 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm column travel between the guideways: 1070 mm ajustment speed: 9,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 11,0 kW range L-W-H: 2200 x 1300 x 2300 mm weight of the machine ca.: 1870 kg. Furnishing: - hydraulic workshop press - Table height adjustment - V-block tool insert - Pressure gauge The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 30 t stroke: 200 mm table surface area: 775 x 190 mm working width: 775 mm pressing speed: 5,0 mm/sec feed speeds: 7,5 mm/sec return speed: 10,0 mm/sec total power requirement: 3,0 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,5 x 0,7 x 1,8 m - hydraulic workshop press - table height adjustment - V-block tool insert - pressure display manometer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80 t stroke: 250 mm table surface area: 1040 x 260 mm column travel between the guideways: 1040 mm ajustment speed: 8,0 mm/sec working feed: 5,0 mm/sec return speed: 10,0 mm/sec engine output: 5,5 kW weight of the machine ca.: 835 kg. dimensions of the machine ca.: 1810 x 700 x 2100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounted on the ...

pressure: 60 t stroke: 250 mm table surface area: 1040 x 370 (315) mm column travel between the guideways: 1040 mm ajustment speed: 8,0 mm/sec working feed: 4,0 mm/sec return speed: 10,0 mm/sec engine output: 4,0 kW weight of the machine ca.: 800 kg. dimensions of the machine ca.: 1.700 x 700 x 2.100 mm Furnishing: - Robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more. - Robust welded steel construction for high demands - Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket - 1x set of V-block prism supports - Manometer for pressure display - simply constructed hand control with: 1x delivery speed 1x working speed 1x retreat speed - Piston can be stopped in any position - Hydraulic tank mounte ...

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1190mm -Cross section: 150 x 65 mm - Recording: see technical drawing in the photos -Transport dimensions: 1430/910/H190 mm -Weight: 280 kg

Forklift shovel, hydraulic forklift shovel, light material shovel, tipping shovel, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1180 mm -Cross-section: 150 x 60 mm -Recording: see technical drawing in the photos -Transport dimensions: 1400/905/H185 mm -Weight: 264 kg

Forklift shovel, hydraulic forklift shovel, light material shovel, tipping shovel, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1110 mm -Cross-section: 150 x 50 mm -Recording: see technical drawing in the photos -Transport dimensions: 1290/700/H150 mm -Weight: 202 kg

pressure: 150 t stroke: 300 mm table surface area: 1070 x 290 mm working width: 1070 mm pressing speed: 5,0 mm/sec feed speeds: 9,0 mm/sec return speed: 10,0 mm/sec total power requirement: 11,0 kW weight of the machine ca.: 1,87 t dimensions of the machine ca.: 2,2 x 1,3 x 2,3 m - hydraulic workshop press with adjustable cylinder - Table height adjustment - V-block tool insert - Pressure gauge The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. - without heavy-duty castors Length 1900 mm Width 810 mm Height 860 mm Internal dimensions (LxWxH) 1.5 x 0.74 x 0.78 Capacity 600 l weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 810 x 860 mm

Description: The containers are chip bins ! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. - with heavy-duty castors Length 1900 mm Width 810 mm Height 860 mm Internal dimensions (LxWxH) 1.5 x 0.74 x 0.78 Capacity 600 l weight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 1,900 x 810 x 860 mm

bore capacity in steel (diameter): 34 mm throat: 300 mm bore stroke: 150 mm bore capacity in cast iron (diameter): 40 mm thread capacity: M 27 spindle taper MT: 4 spindle speeds:: Stufenlos 100 - 2000 U/min column diameter: 125 mm automatic feeds: 3 / 0,1 - 0,2 - 1,3 table:: 400 x 420 mm Drive: Keilriemen total power requirement: 3 kW weight of the machine ca.: 360 kg dimensions of the machine ca.: 2,3 x 0,6x 1,1 m - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant system - ...

bore capacity in steel (diameter): 32 mm throat: 300 mm bore stroke: 150 mm : MK 4 : 480 x 480 mm : 0,1 - 0,2 mm/U : M 22 (St 60) : 35 mm : 80-1170 U/min : 1,45 kW : 0,34 t : 0,8 x 1,0 x 2,0 m Accesories: -Machine light (built-in) -Coolant device in the foot (built-in) -Keyless chuck 3 - 16 - Insertion spigot MK 4 -Reducing sleeve 2:1 -Reducing sleeve 3:2 -Reducing sleeve 4:3 -drive-out wedges -Slot Nuts -Machine vice Promat 125 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm throat: 300 mm bore stroke: 150 mm : MK 4 : 480 x 480 mm : 0,1 - 0,2 mm/U : M 22 (St 60) : 35 mm : 80-1170 U/min : 1,45 kW : 0,34 t : 0,8 x 1,0 x 2,0 m Accesories: -Machine light (built-in) -Coolant device in the foot (built-in) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Your contact persons in our company: Lord: Andre Evering Lord: Mario Klöver Lord: Falk German Lord: Simon Blank We offer you a final stand increase for sale here. Included in delivery are: End stand riser, used Manufacturer: SSI Schäfer Type: PR 350/400 Total height: approx. 465 mm Height: approx. 400 mm Total width: approx. 80 mm For stand depth: approx. 1,050 mm Material thickness: approx. 4 mm Internal top-up tab: approx. 70 x 40 x 3 mm (TxWxS) Notes: - suitable for a frame profile width of U 80 mm and a stand depth of 1,050 mm - The final stand increase is attached to the existing shelf stand and then screwed. The shelf stand is raised by 400 mm. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which can be queried sep ...

Your contact persons in our company: Lord: Andre Evering Lord: Mario Klöver Lord: Falk German Technical data for the pallet rack traverse: Shelving system: Link 51 Type: Boltless XL Included in delivery are: 01x pallet rack traverse, used Material color: yellow Truss type: B105YC Box profile: 105 x 45 mm Agraffe: 3 hooks Clear width: 2,700 mm load per pair of trusses 2,500 kg, with the same. distributed load 02x safety pins, used Version: kompl. galvanized To secure the longitudinal members against unintentional lifting General information about the article: This item is offered for pickup only. A desired Transport or dispatch of this article is associated with additional costs, which can be queried separately from us depending on the place of delivery or scope of delivery. Our services at a glance: (Prices on request) A Assembly, assembly  ...

Your contact persons in our company: Lord: Andre Evering Lord: Mario Klöver Lord: Falk German Technical data for the pallet racking system: Shelving system: Mecalux Technical data for installation: Number of shelf rows: 01 pcs. Length per row of shelves: approx. 24,605 mm Number of fields / shelf row: 09 pcs á 2,645 mm Number of levels plus floor level: 02 pcs. Included in delivery are: 10x pallet rack stand, used Material color: blue Stand Type: M-80-P Stand profile: 80 x 69 x 1.80 mm Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,800 mm high 1,100 mm deep 36x pallet rack trusses, used Material color: sendzimir galvanized I-profile: 120 x 55 mm Traverse type: 2T 120 Clear width: 2,645 mm load per pair of trusses 1,500 kg, with the same. distributed load 72 ...

Technical data for the pallet rack beam: Shelving system: Link 51 Type: Boltless XL The scope of delivery includes: 01x Pallet rack traverse, used Material color: orange Truss type: 7BB Box profile: 120 x 50 mm Agraffe: 3 hooks Clear width: 2,700 mm max. load per pair of trusses 4,000 kg, at the same time. distributed load 02x locking pins, new Version: complete. galvanized To secure the longitudinal beams against unintentional lifting Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. In addition, a desired Transport or shipment of this item is associated with additional costs, which can be queried separately from us depending on the place of delivery or scope of delivery.

Technical data for the Tiefensteg: Manufacturer: SSI Schaefer The scope of delivery includes: 01x Tiefensteg, used Material colour: grey Total length: approx. 1,108 mm f. column depth: approx. 1,100 mm Clear span: approx. 999 mm Truss support: approx. 55 mm Profile dimensions: CS 190 x 75 x 13 mm Material thickness: approx. 2.00 mm Weight / pcs.: approx. 8,020 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Hint: Only the workbench stand is offered. Technical data for the workbench stand: Manufacturer: SSI Schaefer Type: P213 The scope of delivery includes: 01x Workbench stand, used Material color: white Profile dimensions: 120 x 100 x 2.00 mm Stand height: approx. 1,000 mm Stand depth: approx. 1,000 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Hint: No screw material included. Technical data on the restock straps: Manufacturer: Jung Heinrich Type: MPB The scope of delivery includes: 02x Top-up tabs, used total height: approx. 320 mm overall width: approx. 110 mm Inner width: approx. 102 mm f. Frame profile width: approx. 100 mm Depth: approx. 50 mm Material thickness: approx. 4.00 mm Hole spacing i. d. depth: approx. 50 mm Perforated grid i. d. width x height: approx. 60 x 50 mm Drill holeØ: approx. 10 mm Material color: blue Weight | pcs.: approx. 1,860 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.