facing lathe used for sale

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 450 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Spindel nose for collets: W 20 Taper in spindle: Threaded Spindle speeds: number (steps): 24 from: 45 rpm up to: 3100 rpm Pitch of leadscrew: 4 mm Diameter of leadscrew: 40 mm Taper in tailstock:: 2 MT Feeds: number (steps): 8 length: from: 0.020 mm/r up to: 0.30 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.50 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1375 mm Width: 670 mm Height: 1210 mm Various accessories: 3-jaw chuck Quick closing attachment Quick change tool: MULTIFIX Set of collets: W 20 Tool holder with elements Lamp Drilling tailstock Clutch and brake 2 drawers

Horizontal Lathe POREBA TCA 160 x 12 m Condition: very good, complete Technical details: Max. swing over bed 1600 mm Max. swing over carriage 1280 mm Max. swing over gap 1600 mm Turning length (between centers) 12000 mm spindle turning speed (min) 0.85 rpm spindle turning speed (max) 170 rpm The width of guide way 1100 mm Dia. of spindle bore 105 mm Taper of center sleeve 120/80 Feeds: bed slide/longitudinal 0,19-5, 0 mm/1 spindle rotation Feeds cross slide 0,095-2, 5 mm/1 spindle rotation Rapid travel-longitudinal/face 4000 mm/min Max work piece weight centre this centre 30000kg Max work piece weight with 2 steady rest 40000kg Faceplate diameter 1600 mm Metric thread 35 strokes-1-50 mm Whitworth thread 35 strokes-24-1/2 " Module thread Diametrical pitch thread Section of tool shank 70x70mm Travel of the top slide 0,095-2, 5 mm/1 spindle rotation Max.travel o ...

Condition: very good mechanical parts Technical details: Turning diameter 3200 mm Table diameter 3200 mm Turning height 2000 mm Max workpiece weight 50 t Table speeds 0.66-62.1 rpm Crossrail vertical movement 1870 mm Main motor power 125 kW Machine dimensions 5100 x 9200 x 7200 mm Machine weight 90.4 t

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Base-mounted type: Knee-operated reversing switch Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Drilling tailstock

Vertical Lathe WMW NILES DMF 6300 Condition: Very good, complete Technical details: Turning diameter: 6300 mm Turning diameter, with side-support: 6000 mm Degrees displacement of the vert. supports: +/-30 ° Displacement of the side-support: 1800 mm Workpiece height max. : 2500 mm Workpieceweight max. : 50000 kg Chuck diameter: 5300 mm Speedrange: 0.35-14 rpm Feeding speeds (16): 0.063-11.2 mm/omw. Rapid speed of the supports: 1000 mm/min ¬ ¹ Rapid speed of the side-support: 500 mm/min ¬ ¹ Connection power: 120 kW Dimensions of the machine W: 14.40 x 8.20 x 8.70 m Weight of the machine ca.: 174.000 kg

ZUCKERMAN CHALLENGER- auto copy lathe and sander, capacity - ( mills 10" dia.by a max. of 120" long) mills using cup cutters- followed by (1) sanding station, unit has hopper feeder, mills & sands one part at a time, does parts like: boat oars, shovel handles, gunstocks, chair legs, ect. Price-$10,900

Turning Diameter 400 mm Turning Lenght 650 mm With C ,Y axes and subspindle Control Unit Fanuc 31i Can be inspected under power

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Base-mounted type: Knee-operated reversing switch Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Drilling tailstock

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 25 mm Inner taper type: 25 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: W20 Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: Knee-operated reversing switch Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Grinding attachment for collets B8 Wheel arbors 3-jaw chuck diameter: 100 mm 3-jaw chuck diameter: 100 mm Set of jaws hard Face plate diameter: 200 mm Driving plate Set of collets Set bell collets Tailstock ...

-Digital display Fagor. -Accessories available. Tip height 200 mm Top width 800 mm Turning diameter over slide/bed 240/425 mm Length of the bend of the Planscheibem with 4 JAWS 180 mm Spindle bore 51 mm Inner cone 60 metric Recording camlock D6 " Speed 45-2240 Rev/min The lead screw pitch 6 mm Tailstock spindle mount MT 4 Diameter of tailstock Quill 70 mm Quill: 200 mm stroke Feeds: Along 0.05 2.8 mm / Rev Plan 0.05 2.8 mm / Rev Rapid traverse: LW Thread pitches: Metric 0.5 14 mm English 2-56 U/1 " Module 0.125 3.5 Motor 380 Volt, 12.5 HP Machine dimensions: B x T x H 2400 x 1200 x 1800 mm Weight 2100 kg

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 76500 Technical data Number of spindles: 2 Number of revolvers: 2 Swing over bed: 240 mm Spindle hole: 65 / 42 mm Turning diameter: 200 mm Bar diameter: 65 / 42 mm Clamping chuck diameter: 200 mm Turret carriage: Longitudinal travel (Z-axis): 555 mm Transversal strocke (X axis): 190 mm Transversal travel (y-axis): +/-40 mm Carriage:: 2 Longitudinal travel (Z-axis): 555 mm Transversal strocke (X axis): 190 mm Turret carriage: Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 12 Driven tools turret 2: 12 Spindle speeds: 40-4000 rpm Main spindle: C axis (spindle,resolution): 0.025 ° Spindle speeds: stepless from: 25 rpm up to: 5000 rpm Torque max.: 200 Nm Back spi ...

The photo shows the commissioning at our customer in Turkey. Other machines with a flatdisc diameter of 3000mm to 6000mm are available at short notice.

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1500 mm Various accessories: Base-mounted type: Belt-tensioning device for milling/grinding att. 4-jaw chuck diameter Quick closing attachment Drill chuck Hand rest Fixed steady

machine has live spindle for drilling and grinding face plate diameter mm 800 max. workpiece diameter mm 1000 max. workpiece height mm 750 max. diameter of external working mm 1000 Z axe mm 630 face plate revolutions 1 5 – 500 rpm main motor output kW 30 (40) machine dimensions length mm 4900 height mm 3830 width mm 4485 machine weight kg 16000 machine had DRO Tesla NS 642

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 150 mm Distance between centres: 600 mm Swing over cross-slide: 177 mm Swing over bed: 340 mm Swing in gap Spindle hole: 40 mm Taper in spindelstock MK: 5 Taper in spindle: Camlock: D 1-4" Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 5 MT Spindle diameter: 60 mm Feeds: number (steps): 48 length: from: 0.015 mm/r up to: 0.35 mm/r Frontal: from: 0.015 mm/r up to: 0.35 mm/r Rapid motion: 4 m/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 2.70 HP Total power required: 6.30 HP Machine´s weight about: 1250 kg Overall dimensions machine: Length: 1730 mm Width: 970 mm Height: 1300 mm Various accessories: 3-jaw chuck diameter Coolant system Quick closing attachment Set of steel holders Lamp Drilling tailstock

Center height 660 mm Center width 11000 mm Turning diameter 1320 mm Turning max. via support 950 mm Power 55 KW Torque 35000 Nm Clamping max. 1200 Workpiece weight 14 to Accessories: Bezel 200-630 mm

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 2000 mm Width: 900 mm Height: 1500 mm Various accessories: Working bench: Length: 2000 mm Width: 1000 mm Height: 900 mm Rear drive Pneum. quick closing attach. Milling attachment Cross slide CNC: COMBITEC E-600

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 2000 mm Width: 900 mm Height: 1500 mm Various accessories: Working bench: Length: 2000 mm Width: 1000 mm Height: 900 mm Rear drive Pneum. quick closing attach. Cross slide CNC: COMBITEC E-600

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 450 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 210 rpm up to: 3000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 200 kg Overall dimensions machine: Length: 2500 mm Width: 800 mm Height: 1300 mm Various accessories: Working bench: Length: 2000 mm Width: 700 mm Height: 900 mm Driving plate Drilling tailstock Drill chuck Fixed steady

Table diameter: 2,000 mm Max diameter of workpiece: 3,000 mm Main drive: 60 KW Speed rotation of the table: 2.8 - 162 rpm Max workpiece height under the cross member: 2,500 mm Travel RAM: 1,750 mm Tool magazine: 12 workstations Machine Weight: 35 t Accessories: Grinding spindle and various tool holders 3000 rpm Wheel diameter 250 mm

1 x lathe Feinbau PM 1 FZ Facilities: - Hand lever cross support with Tripan quick-change system - additional steel holder single steel holder on support rear - Electric drill rig for thread cutting - collet tension with tension ingenuity Technical data: - Spindle passage: 23 mm - Spindle speeds: 700/1400/2800 rpm (left/right) - Peak height: 110 mm - Tip width: 160 mm - Groesster circulation over bed:220 mm Accessories: 20 x drawer tension erases partly new (1 - 20 mm round) 1 x Interchangeable Holder Tripan with 2 different casts 1 x collet + suit rod in tailstock Operating instructions (Copy) Machine can be inspected under electricity.

Center height 1,500 mm Permissible diameter on the bed 2,400 mm Permissible diameter above 2,200 mm Cross slide Peak width 10,000 mm Permissible workpiece weight 60,000 kg Between tips without lunettes Power main motor 100 kW Total installed power 145 kW Speed range 1-300 rpm Gear stages 3 Max Torque 110,000 Nm Spindle bore 160 mm Accessories: Conveyor Roller buck Two fixed bezels

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC 18i-TB Operating hours: 9976 Technical data Number of axis total: 5 Swing over bed: 620 mm Turning diameter: 380 mm Bar passage: 52 mm Turning length: 540 mm Longitudinal travel (Z-axis): 600 mm Longitudinal travel (X-axis): 217 mm Transversal travel (y-axis): 101.6 mm Turret slide: number: 1 Number of positions turret 1: 12 Driven tools turret 1: 12 Spindle speeds: 4000 rpm Power of driven tools: 5.5 kW Spindle nose: Inner cone diameter: 40 mm Taper in spindle: Camlock: A2-6" Collet bore: 52 mm Spindle speeds: stepless up to: 4500 rpm Back spindle:: A2-5" max. speed: 6000 rpm Spindle diameter: 45 mm Power of back spindle: 11/15 kW Rapid traverse:: 30 m/min Time under power: 13221 Hour Working time: 8781 Hour Voltage 50 Hz 3x: 400 ...

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Technical data Centre height: 125 mm Swing over cross-slide: 115 mm Swing over bed: 200 mm Max. turning diameter: 270 mm Maximum turning length: 265 mm Carriage: Longitudinal travel (Z-axis): 400 mm Transversal strocke (X axis): 150 mm Turret carriage: Type: VDI-20 Number of positions turret 1: 8 Fixed tools turret 1: 4 Driven tools turret 1: 4 Taper in spindle:: D1-3" Camlock Inner taper type: B32 Spindle speeds: stepless from: 30 rpm up to: 5000 rpm Spindle power: 5.5 / 7.5 kW Feeds: stepless longitudinal from: 0 mm/min up to: 5000 mm/min transversal from: 0 mm/min up to: 5000 mm/min Rapid traverse:: 7.5 m/min Spindle motor: 5.5 kW Air connect: 5 - 6 bar Voltage 50 Hz 3x: 380 Volt Total power required: 15 kVA Machine´s weig ...

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Speed potentiometer 2 drawers

Table diameter 2,000 mm Max. Turning diameter 2,150 mm Turning height 1450 mm Table speed 3-140 rpm Max. weight of the workpiece 12000 kg Milling spindle: Maximum speed 2,000 rpm Milling spindle Motor power 22 kW Total weight of the machine approx. 34,000 kg Machine complete with: C-axis: 360,000° Milling spindle 22 KW Tool changer 16 positions Tool changer for milling tools ISO 50 16 positions Complete cladding Conveyor Complete cooling system with filtration

1.1. Tacchi turning lathe Model DB 1900 x 10.000 Series 132 L • CNC Sinumerik 840 DE-SL • Centre height from the ways 1,900 mm • swing over saddle 3,050 mm • Swing over bed, without telescopic covers 3,300 mm • max. work piece weight 40,000 kg • Min. and max. distance between headstock and Tailstock without steady rests 500 – 10.000mm • Main headstock o Diameter face plate 3.000 and additional 1.000mm o Integrated C-Axis o Drive power S1 (100%) 95 kW o Range of spindle speed 1 – 400 rpm o Number of speed ranges 3 o torque 80,000 Nm o Spindle nose DIN 55026 20" o Spindle hole 160mm • Tailstock o Quill diameter 450mm o Quill stroke 200mm o Internal taper Metric 100 at 60° • Equipment o 12-position live tool turret  Station diameter VDI 620mm  Power 18.5 kW  Max torque 400 Nm  Max speed 1,500 rpm o Y-axis  Vertical  ...

Center height 660 mm Distance between the centers length 12000 mm Turning diameter 1320 mm Turning max. via support 950 mm Clamping max. 1200 Power 55 KW Torque 35000 Nm Bezel I 200-630 mm Workpiece weight 21 to Accessories: Conveyor

Manufactured by Ryazan plant (Russia) Max. work piece diameter, mm 800 Max. work piece diameter above support, mm 450 Max. work piece length, mm 2800

Key data: 500 , 1500 , 500

Technical description: Turning diameter over bed 500mm Turning diameter via support 325mm Turning diameter in bridge 630mm Center width 1500mm Bed width 330mm Spindle nose CAMLOCK Gr.8 Spindle bore 80mm Speed levels 15 Speeds 24 – 1600 rpm Metric threads 66 0.5-28mm Inch thread 66 1-56 Module thread 33 0.5-3.5 Diametrical Pitch 33 8-56 Longitudinal feeds 0.072-4.038mm/U Cross feeds 0.036-2.019mm/rev Tailstock MK5 Tailstock pinole stroke 120mm Motor power 380V 5.5KW Weight Approx. 1900kg Equipment: Digital display 3 axes with glass measuring rods. Quick-change steel holder system Multifix compatible Gr.B with 4 pockets, removable bed bridge, lining protection with electr. Locking, foot brake, coolant system, fixed stop, halogen work light, 3-jaw chuck, 4-jaw chuck, clamping disc, lynettes, tips, hardened and ground bed guide tracks, hardened and ground gears, ti ...

- overhauled in 2007 (spindle bearings + silde guides) - control: FANUC OT - max. turning Ø: 16 mm - max. turning length in 1 fixture: 130 mm - spindle speed: 300 - 8.000 1/min - cross tools: 5 - spindles in frontal device: 3 - max. boring-Ø: 8 mm - max. thread-Ø: M6x1,0 - fixed and rotating guide bush - parts removal backwards for long partse - after-ripening device - weight: 1.000 kg - div. tool holders - barfeeder CNC-Boss 542/32L, Bj. 1994

Technical data Centre height: 102 mm Distance between centres: 350 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1300 mm Width: 600 mm Height: 1300 mm Various accessories: pedal-operadet reversing switch 2 drawers Stepless speed variator Coolant system Lamp Headstock with reduction gear Quick closing attachment Cross slide with 90 mm stroke

Plan disc Bison New in original packaging

Control: SIEMENS SINUMERIK 840 D Operating hours: 29500 Technical data Number of axis total: 4 Number of spindles: 2 Distance spindle nose: 580 mm Swing over cross-slide: 100 mm Swing over bed: 145 mm Spindle hole: 50 mm Turning diameter: 100 mm Bar diameter with collet: 36 mm Clamping chuck diameter: 140 mm Carriage 1: Longitudinal travel (Z-axis): 320 mm Transversal strocke (X axis): 220 mm Carriage 2: Longitudinal travel (X-axis): 345 mm Cross travel (z-axis): 120 mm Turret slide: number: 2 Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 12 Driven tools turret 2: 12 Spindle speeds: 30/6000 rpm Spindle speeds: 30/6000 rpm Power of driven tools: 2.1 kW Plage vitesse de rotation rad./axial: 30/6000 rpm Collet bore: 36 mm Spindle speeds: stepless from: 40 rpm up to: 8000 rpm Back spindle: max. speed: 40/8000 rpm Power of back spindle: 26/21 kW st ...

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 45 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1400 mm Various accessories: Base-mounted type:: 102-82.000 2 drawers Stepless speed variator Headstock with reduction gear Driving plate Adjustable tailstock Drill chuck Cross slide with 90 mm stroke Fixed steady

MANDRINO NASO: ASA A2-8 BAR PASS: 90 MM ROUND NUMBER: RPM 2500 COURSE AXIS X: 300 MM COURSE ASSE Z: 1250 MM TURNING DIAMETER: 500 MM TURNING LENGTH: 1200 MM IDRAULIC AUTOCENTRANTE TOOL COUNT: 12 CONTROL: FANUC Oi-TD YEAR: 2010

Self-centering 4 jaw lining NEW Bearings: 315 mm type 3704 400 mm type 3704 400 mm type 3744-11

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Spindle speeds: number (steps): 24 from: 58 rpm up to: 2900 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.7 HP Machine´s weight about: 400 kg Overall dimensions machine: Length: 2000 mm Width: 800 mm Height: 1500 mm Various accessories: On work bench: Working bench: Length: 2000 mm Width: 800 mm Height: 900 mm Rear drive 3-jaw chuck diameter: 120 mm Set of collets: W 20 Set of centres Drill chuck Grinding attachment Fixed steady

Three-jaw chuck diameter 240mm

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 45 mm Inner taper type: 38 F Taper spindle threaded Spindle speeds: stepless from: 90 rpm up to: 2600 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: pedal-operadet reversing switch Coolant system 3-jaw chuck diameter: 100 mm Quick closing attachment Drilling tailstock Lever operated cross slide

Original packs a set

Technical data Centre height: 102 mm Distance between centres: 300 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: Knee-operated reversing switch 2 drawers Stepless speed variator Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Headstock with reduction gear Set of collets: W 20 Drilling tailstock Cross slide with 90 mm stroke

Parallel lathe Geminis GE650S to be rebuilt. Distance between points: 1000mm. Flip on bench: 680mm. Flip on cart: 410mm. Flip over neckline: 850mm. Main hole: 84mm. Motorized trolley and charriot. Speeds: 18 (13-1000rpm). Main engine: 15hp. Plate and trolley protections and CE RD1215/97 certificate. Quick-change plate and turret.

Turning machine Tip height 150 mm Tip width 650 mm 2 speeds Flat disc diameter 240 mm Electricity connection luminous flux Dimensions 1230 mm x 620 mm x H 1620 mm

Key data: 400 Siemens, 1250 810 D, 128

Center height: 400 mm Center distance: 1250 mm Spindle bore: 128 mm CNC Brand: Siemens CNC Model: 810 D 3 chuck 315 mm 3 chuck 500 mm Boring bar holder Parat tool system with 4 inserts One off last “Made in Goppingen” machine Chip conveyor New price EUR 152.500   Swing over bed Ø:        820mm Swing over cross slide Ø:515mm DBC Turning Length:      1.250mm Spindle bore:            128mm Spindle power:           46kW Tailstock spindle Ø:     125Ø Stroke pinole:           280mm Spindle taper:           6Mk Speeds / ranges:         1600Rpm Feed rate X-Axis:        12.500mm/min. Feed rate Z-Axis:        ...

Key data: 1030 Fanuc, 1650 21 i-T, 12

Turning diameter: 1030 mm Turning length: 1650 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i-T 3 Chuck Kitagawa 630 mm Chip conveyor Tool eye Tool holders in Revolver Max. turning Ø:1.030mm X-Axis:        470mm Z-Axis:        1.650mm Spindle bore:  117mm Speedrange:    1800Rpm Spindle power: 45kW ATC / revolver:12 Chip conveyor: Yes  Tool eye:      Yes  Pinole taper:  6Mk Stroke pinole: 150mm Quill Ø:       160mm Length:        5.800 mm  Width:         3.200 mm  Height:        2.800 mm  Weight:        16.500 kg 

CNC CONTROL: MSD 501 II, FANUC FEATURES: DIAMETER ADMITTED ON THE BED, MM 680 MAXIMUM TURNING DIAMETER 440 MM N1 MAXIMUM TREATMENT DIAMETER N2 322 MM MAXIMUM TURNING LENGTH, MM 471 THE STANDARD MACHINING DIAMETER MM170 MAIN SPINDLE: STEP PANEL 45 MM COUNTER SPINDLE: HOLE PITCH LINE 43 MM TURRET 1: POSITION N12 ALL MOTORIZED TOWER 2: POSITION N12 ALL MOTORIZED

Key data: 150

Center height: 150 mm Center distance: 650 mm Spindle bore: 43 mm incl. SMW AUTOBLOCK 3 chuck 150 mm incl. collet device incl. Multifix tool system GE FANUC QuickTurn CNC Slant bed construction Max. turning Ø:300mm X-Axis:        170mm Z-Axis:        650mm Spindle bore:  43mm Speedrange:    4500Rpm Spindle power: 8,3 kW Pinole taper:  3Mk Stroke pinole: 110mm Quill Ø:       50mm Length:        2.280 mm  Width:         1.080 mm  Height:        1.500 mm  Weight:        1.160 kg 

Key data: 550

Center height: 550 mm Center distance: 2500 mm Spindle bore: 128 mm Workload 4.500 Kg Flying in chuck 1600 Kg Swing over bed Ø:        1.100mm Swing over cross slide Ø:780mm DBC Turning Length:      2.500mm Spindle bore:            128mm Spindle power:           37kW Bed width:               600mm Tailstock spindle Ø:     125Ø Stroke pinole:           270mm Spindle taper:           6Mk Speeds / ranges:         900Rpm Length:                  4.800 mm  Width:                   2.200 mm  Height:          &nb ...

Machine weight: 39,000 kg Faceplate diameter 2000 mm number of supports: 2 pcs. Dimensions : Height 6280 mm width 6600 mm length 4800 mm Extras: Right support with turret head, left and side - sliders. Digital indication of NS 114. Technical condition at the time of sale: Defective rotary amplifier main drive-replacement is required. Require replacement of cables and wires external piping:-machine control cabinets. Repair and adjustment of electrical parts. Not operated since 1994 The maximum dimensions of a workpiece Height 1300 mm Diameter of 2000 mm Weight 15 000 kg