extruder for pp used for sale

Guide cylinders, guide pneumatic cylinders, pneumatic cylinders, compact cylinders -Manufacturer: Festo, guide cylinder type DFM-20-125-B-PPV-A-GF 532316 -Piston: Ø 20 mm -Stroke: 200 mm -Max. pressure: 10 bar -Number: 2 cylinders available Price: per piece -Dimensions: 260/85/H55 mm -Weight: 2.0 kg/pc.

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, standard cylinder type DSBC-40-20-PPVA 2123166 -Stroke travel: 20 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm / M12 -Max. pressure: 12 bar -Number: 16 cylinders available -Price: per piece -Dimensions: 180/55/H55 mm -Weight: 2.6 kg/pc.

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-40-125-PPVA-N3 1376661 -Stroke travel: 125 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm / M12 -Max. pressure: 12 bar -Number: 2 cylinders available Price: per piece -Dimensions: 290/53/H92 mm / 290/55/H55 mm -Weight: 1.2 kg/pc.

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders -Manufacturer: Festo, compact cylinder type ADN-80-15-A-PPS-A 572728 -Stroke travel: 15 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm / M20 -Max. pressure: 10 bar -Quantity: 1 cylinder available -Dimensions: 110/95/H125 mm -Weight: 1.4 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-80-100-PPVA-N3 1383337 -Stroke travel: 100 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm / M20 -Hole: Ø 20 mm -Max. pressure: 12 bar -Quantity: 1 cylinder available -Dimensions: 320/95/H95 mm -Weight: 3.5 kg

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, round cylinder type DSNU-20-160-PPV-A 19241 -Stroke travel: 160 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar -Number: 7 cylinders available - Price: per piece -Dimensions: 290/35/H32 mm -Weight: 0.3 kg/piece

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, compact cylinders -Manufacturer: Festo, compact cylinder type ADN-20-15-A-PPS-A 577167 -Stroke travel: 15 mm -Piston: Ø 20 mm -Piston rod: Ø 10 mm / M8 -Max. pressure: 10 bar -Number: 5 cylinders available -Price: per piece -Dimensions: 75/35/H35 mm -Weight: 0.2 kg/pc.

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, round cylinder type DSNU-20-200-PPV-A 19242 -Stroke travel: 200 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 335/27/H55 mm -Weight: 0.3 kg/piece

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, round cylinder type DSNU-20-160-PPV-A 19241 -Stroke travel: 160 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar -Quantity: 1 cylinder available -Dimensions: 290/27/H55 mm -Weight: 0.3 kg

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, round cylinder type DSNU-25-85-PPV-A 14322 -Stroke travel: 85 mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm / M10 -Max. pressure: 10 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 225/27/H50 mm -Weight: 0.3 kg/pc.

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, round cylinder type DSNU-25-125-PPV-A 19249 -Stroke travel: 125 mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm / M10 -Max. pressure: 10 bar -Number: 4 cylinders available -Price: per piece -Dimensions: Ø27 x 265 mm -Weight: 0.3 kg/pc.

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, Round cylinder type DSNU-20-35-PPV-A 1908293 -Stroke travel: 35 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm / M8 -Max. pressure: 10 bar -Number: 34 cylinders available -Price: per piece -Dimensions: Ø 27 x 165 mm -Weight: 0.2 kg/pc.

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, round cylinder type DSNU-S-25-15-PPS-A 8112006 -Stroke travel: 15 mm -Piston: Ø 25 mm -Piston rod: Ø 10 mm / M10 -Max. pressure: 10 bar -Quantity: 1 cylinder available -Dimensions: 130/27/H45 mm -Weight: 0.2 kg

Pneumatic cylinders, air cylinders, pneumatic pistons, air pistons, standard cylinders, round cylinders -Manufacturer: Festo, Round cylinder type DSNU-16-30-PPV-A 1908269 -Stroke travel: 30 mm -Piston: Ø 16 mm -Piston rod: Ø 6 mm / M6 -Max. pressure: 10 bar -Quantity: 1 cylinder available -Dimensions: 140/20/H40 mm -Weight: 0.1 kg

Pneumatic cylinders -Stroke travel: 350 mm -Piston diameter: 80 mm -Piston rod: 20 mm -Connection: 16 x 1.5 mm -Total length when retracted: 480 mm -Total length extended: 830 mm -Air inlet and outlet: adjustable -Quantity: 7 pieces available

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 160 mm -Piston diameter: mm -Piston rod: 16 mm (connection M 12 x1.5 thread) -Total length: 320 mm -Total length extended: 480 mm -Air inlet and outlet: adjustable -Quantity: 15 pieces available Price: per piece

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 50 mm -Piston diameter Ø mm -Piston rod: 20 mm (connection M 16 x1.25 thread) -Total length: 230 mm -Total length extended: 280 mm -Air inlet and outlet: adjustable -Quantity: 3 pieces available Price: per piece -Weight: 1.6 kg/piece

Stamping capacity 550 kN and 280 kN Projection 130 mm or 250 mm

This 3-axis AJAN PP16011 Auto plasma cutting machine was manufactured in 2016. It features a cutting area of 2000 x 3000 mm and can handle a maximum cutting thickness of up to 30 mm. The machine is equipped with a fume extraction and filtration system, ensuring a cleaner working environment. If you are looking to get high-quality plasma cutting capabilities, consider the AJAN PP16011 Auto machine we have for sale. Contact us for further details.

A complete film packaging line Georg Hartmann, consisting of a line distributor, two grouping units and a pillow pack packaging machine, is available. Packaging materials: film, Packaging capacity: approx. 30 packages/min. Documentation available. An on-site inspection is possible.

Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Press brake manufactured in 2002. This HACO PPM 30135 b features a pressing force of 135 tons and a bending length of 3100 mm. It is equipped with a power of 15 kW, ensuring efficient operation. If you are looking to get high-quality bending capabilities, consider the HACO PPM 30135 b machine we have for sale. Contact us for further details.

Display Diane PP450.0571-K01 | Jenbacher original 541065 - NEW OPTIONAL ITEM: Interface card 3IF779.9 B&R -Jenbacher original 442076 - NEW = 740,00 €

Manufacturer: Habrama Model: PPFM 3200 Year of Manufacture: 2008 Overhauled: 2025 (complete overhaul) Working Ranges - X-Axis (longitudinal): 3200 mm - Y-Axis (cross): 500 mm - Z-Axis (vertical): 410 mm - C-Axis: +30 degrees / -30 degrees Machine Table - Table Size: 390 x 4750 mm - Maximum Load: 6000 kg - T-Slots: 4 pieces - T-Slot Spacing: 90 mm - T-Slot Width: 18 H7 mm Axis Speeds and Accuracy - X-Axis Speed: 21 m/min, direct positioning accuracy +/- 0.002 mm - Y-Axis Speed: 10 m/min, direct positioning accuracy +/- 0.002 mm - Z-Axis Speed: 6 m/min, direct positioning accuracy +/- 0.002 mm - C-Axis Speed: 2 rpm, direct positioning accuracy +/- 0.003 degrees Milling Head - Drive Power: 45 kW (S6 at 40% ED) - Spindle Speed: 0 to 360 rpm - Maximum Cutter Diameter: 300 mm - Minimum Cutter Diameter: 125 mm + 2x cutting depth - Milling Capacity: up to Module 36 - Spindle Interface ...

Water jet high-pressure pump, high-pressure pump for water jet cutting, water jet cutting, water jet cutting system -Manufacturer: Deter Fluidtechnik, high-pressure pump for waterjet cutting with water tank and feed pump -High-pressure pump: Type PP1205/110V -Centrifugal pump: Calpeda NM 1/AE -Container: Stainless steel -Individual components: see photos -Dimensions: 1580/410/H600 mm -Weight: 118 kg

8 assen: Y1 / Y2 / X / X#39; / R / Z1 / Z2 / V met Easy Form lasermeetsysteem met CNC-bombardement met Lazer Safe-bescherming met Willa hydraulische klemming boven en onder Turbo-versie Capacity: 220 ton x 4100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 400 mm Table width: 120 mm Locking speed: 120 mm/sec Working speed: 21 mm/sec Returning speed: 200 mm/sec Electric motor (power): 42 kW Length: 6320 mm Depth: 2850 mm Height: 3600 mm Weight: 20 ton Capacity: 220 ton Bending length: 4100 mm

Overview The solo screw capper was manufactured and taken into action in 2007 by Adelski. So far the machine was used in a winery in Germany. The machine is becoming free, as the products which have been produced on that line have been shifted to another filling line. Besides the solo screw capper there is the cap feeding and orientating system, which belong to the scope of supply. The screw capping elements will be kept at the production facility as these will be used in another machine. On request we can offer suitable screw capping elements. Tech Specs: Capacity: up to 12,500 bph Number of capping places: 5 Working direction: counter clockwise Control: Siemens S7 Accessories: Pneumatic cap feeding system Cap orientation system for long caps  

- Only 100 Working (table/guiders/tooling still in prohibitor) - Installed never used in production only testing - CNC T1 + T2 + T3 Bending help support arm in front - 3 x HH 2600 Module backgauge 3 x Z1+R1+Delta1 - Lower Tooling set Variable VLA 50-150 mm - Upper Tooling set LVD 505  - Adjustment V-Axis 59,3 to 249,3 mm - Thermotec Oil chiller GC25T-35 max. 2200 kPa - CADMAN TOUCH with the best software for pressbrakes  - Hydraulic top tool clamping - Table width 500 mm - Troath in column 1000 mm

A complete Weber slicer and packaging line is available. 1) Weber CZB infeed conveyor, year of manufacture: 2007. 2) Weber SCA scanning unit, year of manufacture: 2007. 3) Weber MCS 904 slicer, year of manufacture: 2007, knife type: sickle, max. speed: 2000rpm, slice thickness range: 0.5mm-100mm. 4) Weber inspection and reject unit. 5) Weber CNS transfer station. 6) CFS PowerPak PP 620 thermoforming packaging machine, year of manufacture: 2007, film width range: 320mm-700mm, max. forming depth: 150mm, index length: 800mm. 7) 2x labeling machines. 8) Weber MC-SA-F1040/500/200 tunnel metal detector. This is a complete slicer and packaging line including various molds, heat sealing tools, longitudinal slitter and rewind station. Documentation available. An on-site inspection is possible.

pressure: 100 t stroke: 380 mm table surface area: 1740 x 996 mm pressure: 258 bar ajustment speed: 7,54 mm/sec work speed: 2,47 mm/sec return speed: 9,06 mm/sec dayligth: 700 mm table height: 720 mm total power requirement: 2,2 kW weight of the machine ca.: 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The qual ...

pressure: 200 t chamfer lenght: 3100 mm distance between columns: 2550 mm stroke of upper beam: 200 mm throat: 300 mm dayligth: 440 mm working feed: 9.0 mm/sec return speed: 80.0 mm/sec : 265 bar Control: konv. work height max.: 965 mm total power requirement: 15.0 kW weight: 10500 kg range L-W-H: 3360 x 1750 x 2800 mm - in checked conditions - machinevideo - https://www.youtube.com/watch?v=EcmvsA4AGfo Equipment: - simple / conventional electro-hydraulic press brake - pivoting operation, front left - electric, infinitely variable depth adjustment (Y1 Y2 axis) Torsion shaft for parallelism - Electro-motorized backgauge (X axis) with handwheel for fine adjustment on recirculating ball screws 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - manual table crowning - split set of roe foot upper tools ... H = 210 mm - 1x as good as new universal  ...

pressure: 400 t chamfer lenght: 4000 mm distance between columns: 3500 mm Control: CNC type: BC 25 Graphic throat: 400 mm total power requirement: 37,5 kW weight of the machine ca.: 25 t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t chamfer lenght: 3000 mm distance between columns: 2550 mm stroke: 150 mm total power requirement: . kVA Number of working hours: . h workpiece: workpiece: Number of strokes: total power requirement: kW weight of the machine ca.: 8,3 t dimensions of the machine ca.: m Back gauge 400mm Throat 250mm Speed: 8mm /S kW: 6,5 Volts: 380 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your ...

Offer 26226 Technical data: - Pressure capacity 220 t - Working width 3050 mm - Passage between the uprights 2550 mm - Table height 950 mm - Projection 450 mm - Installation height 550 mm - Drive 400 V / 18.5 kW - Floor recess - Space requirement approx. W 3500 x H 2950 x D 2000 mm - Weight machine approx. 17500 kg - Two-hand control panel with foot switch - Back gauge adjustable from the front by handwheel - Various bending tools

pressure: 28.0 t throat: 225 mm stroke: 150 mm table surface area: 325 x 300 mm work speed: 2.0 - 9.8 mm/sek return speed: 12.8 mm/sek total power requirement: 4.0 kW weight of the machine ca.: 650 kg dimensions of the machine ca.: 1800 x 900 x 2000 mm - NC control to adjust the piston stroke - Selector switch for manual or semi-automatic operation - Flow control valve and pressure control valve - Integrated pressure gauge - Various tools can be installed on the piston - inside There is a 40 mm hole for attaching the tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 320 t chamfer lenght: 6100 mm control: MNC 95 c Number of working hours: 4312 h voltage: 380 V / 50 Hz V : 7.100 x 2.450 x 3.400 mm total power requirement: 22 kW weight of the machine ca.: 26 t Maximum press force: 320 t Bending length: 6,100 mm Distance between side frames: 5,500 mm Control system: MNC 95 C Maximum ram stroke: 250 mm Maximum daylight (table to ram): 500 mm Throat depth: 300 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Return speed: 70 mm/s Oil tank capacity: 350 l Operating hours: 4,312 h Power supply: 380 V / 50 Hz Total connected load: 22 kW Machine weight: approx. 26 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight of the machine ca.: 720 kg dimensions: 1200 x 950 x 1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t chamfer lenght: 4100 mm distance between columns: 3150 mm stroke of upper beam: 200 mm dayligth: 425 mm throat: 300 mm working feed: 9.0 mm/sec return speed: 90.0 mm/sec work height max.: 980 mm back stop - adjustable: ca. 700 mm Control: PPS-TS Touch oil volume: 350 l total power requirement: 18.0 kW weight: 12.000 kg range L-W-H: 5100 x 1950 x 2850 mm Well-maintained condition () Current new price approx. € 110.000 Special price on request - in checked conditions - machinevideo - https://www.youtube.com/watch?v=ZX9Ap23e__s Equipment: - CNC electro-hydraulic press brakes - with LVD CNC PPS-TS TOUCH control unit intuitive, touchscreen-based user interface simple navigation tool and program library X-axis control and position display Y-axis control and position display swivel-mounted control panel (front left) - CNC-controlled axes: Y1/Y2 + X - CNC motorized bac ...

elektrische achteraanslag elektrische diepteregeling amada tooling opname bovenaan Buigvoorbeeld: 10 mm over een lengte van 3 meter Capacity: 160 ton x 3100 mm Backgauge: elec Max stroke: 300 mm Depth of throat: 340 mm Table width: 200 mm Length: 3400 mm Depth: 2000 mm Height: 2600 mm Weight: 8 ton Capacity: 160 ton Bending length: 3100 mm

Forklift forks, forks, forklift tines with anti-slip coatingLoad capacity: approx. 2.5 ton. Tine length: 1600 mm Tine width: 100 mm Tine thickness: 50 mm (40 mm metal + 10 mm rubber coating coating)Fork carriage height: 405 mm - suitable for tine holder: FEM 2 Form B rubber coating as anti-slip coating and for protecting transport goods? Rocker arm lockWeight: 145 kgas good as new, unusedFor a 2.5 ton. Forklift.; used

MF-25 Corner Forming Machine

Intelligent transport systems Brand: Formetal Type: diverse Wehrmann offers tailor-made transport systems for a wide variety of requirements. No matter whether it is about the transport of carcasses, single plates or stacks. For every transport task, however unusual, there is the optimal system, with a superordinate control that can recognize parts, send them on the right journey and integrate the connected machines. Roller conveyors, chain transports, webbing systems, link belt conveyors, turning stations, carcass erectors, carcass turners, etc ... All of these transport units, which are tailored to your requirements, are provided with a current touch-panel control computer, via which a complex line can be centrally and simply controlled. With a perfect design and tuning of the mechanical components, with a frequency-controlled speed control, both high feed rates can ...

The machine could also be used as a transport belt conveyor. Transport input length 2.000 mm Transport output length 1.000 mm Transport width 600 mm Working height 500 - 700 mm Transport speed 7 - 35 m/min.

New stack turnover machine Brand: Formetal Type: RT.180 PL Technical data: Usable width of roller conveyor: 1.000/1.200 mm Length of roller conveyor: 3.300 mm Min. stack height: 1.150 mm, max. stack pelhöhe: 1.600 mm Min. stack width: 300 mm Max. stack length: 3.000 mm Max. stack weight: 2.800 kg In- and outfeed roller conveyor - Roller Ø 89 mm - Distance between roller 190 mm - Drive with fix rotation speed motor 10,5 m/min. - Installed electrical power: 5,0 kW - Pneumatical door opening system - Stack turner RT.180PL 1000 Max. stack width: 1.000 mm Working height (for roller conveyor width 1.000 mm): 250 mm - Stack turner RT.180PL 1200 Max. stack width: 1.200 mm Working height (for roller conveyor width 1.200 mm): 400 mm

Forming and/or portioning machine for a wide variety of malleable masses This machine can be used to produce products in an infinite number of individual shapes with a flat bottom. We used the machine to portion our date chocolates. - Tabletop device – compact and space-saving - For small to medium production capacities - Fully automatic operation - Easy tool change and quick cleaning - Cost-effective forming rollers can be ordered TECHNICAL DATA: - Year of construction: 2021 - Condition: very good (Nov. 2025 fully serviced) - Dimensions (L×W×H): 750 mm × 550 mm × 940 mm - Weight: approx. 81 kg - 85 kg - Working width: 95 mm - Voltage: 230 V / 50–60 Hz / 16 A - Drive power: 0.5 kW - Control voltage: 24 V/DC PERFORMANCE (calculated with marzipan mass) – Volume (m³/h): 0.113 – Mass (kg/h): 128 – Number of units (pcs/h): 7,066 (bar: 80/20/1 ...

The BIRO F2000N, F3000N, F4000N & HD3000EHN Food / Patty Forming Machines are designed for production of a wide variety of meat and food products, with maximum production output capability from approximately 2000 to 4000 formed products per hour. A large number of drum mold die shapes are available. They vary from the standard round shapes of different diameters to special shapes such as square, oval, rectangle, fish, cutlet, heart, chicken leg, chicken nuggets, rabbit, bone, tree, pork chop, etc.

Pastry Forming Machines Forming Rollers 5 pieces we have in stock Dimensions 58.5cm x 12.5cm Details see picture

Formax ULTRA26 Former  The ultimate burger machine Suitable for forming a broad range of meat, poultry and non-meat products. It is commonly used by high-volume processors to form popular products such as burger patties, pork sausage, chicken fillets and chicken nuggets. Delivers precise weight and shape control while forming products with a natural texture and excellent appearance.

Met RoboHelix-machines kunnen spiraalvormige schoepen worden gevormd uit standaard ronde of van een patroon voorziene werkstukken. RoboHelix-machines vereisen uiterst nauwkeurige synchrone bewegingsbesturing. Door de gebruiker gegenereerde gegevens worden vanuit cloudgebaseerde software, HelixNinja, naar het apparaat gedownload. Deze informatie wordt vervolgens verder verwerkt om coördinaten in het 3D-vlak te genereren, waarmee het proces van het creëren van een vliegtuig vanuit een blanco basis wordt nagebootst. De motoren volgen synchroon deze coördinaten om het vliegtuig te produceren. Met de elektronische nokkenplaatfunctie in TwinCAT NC Camming (TF5050) is relatieve synchrone beweging overal en altijd mogelijk. Afmetingen en toleranties zijn geen probleem meer zodra de motoren en aandrijvingen zijn gekalibreerd. De tweede generatie RX250 uit de machinelijn van RoboHelix heeft een ...

Deze spiraalvormige bladenvormmachine is een koudwalsmachine voor het continu walsen van spiraalvormige bladen uit stripstaal. Door de parameters aan te passen (walsoffset, invoerhoogte, walsdruk, geleidingswiel, enz.) kunnen bladen van diverse specificaties worden gewalst.