We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,374 used machines on RESALE, but how to find them? Machine Search
used
Krauss Maffei KMD 2-110 PVC Extruder Machine Hourly capacity : 450-600 KG PLC Control
used
Cast Film CoEx System (ABA), PE / PP, Capacity: approx. 400 - 700 kg/h, Main extruder, 120 mm, co-extruder of 60 mm, screen changer, melt pump, Co-Ex block, nozzle 1,650 mm, 2-roll chill-roll smoothing unit, cooling section, extractor, double winder with cutting device and edge control, edge trim, film measuring device thickness NDC (without measuring head), incl. operating instructions and e-plans.
used
twin screw extruder Manufacturer Mikrosan Model MÇV 67/22D Year 2004
used
IBAÑEZ 175 MONOLAYER LDPE EXTRUDER HEAD It is not the complete machine, only the head.
used
Mikrosan MCV 67/22D Double Screw Extruder Parallel screw New shaft sleeve New technology screen Machine is in very good condition
used
Material: PE, PP, PS, ABS / Details: three-phase motor, DC, segmented screws and cylinders, degassing, vacuum pump, screw speed: max. 600 rpm, control: Resotec PLC
new
New laboratory extruder 25/25 LD Extruder Motor - AC Motor 2.2kW Water bath - 1000 mmm Granulator for a strand
used
EDI Autoflex Extrusion Die width 900 mm.
used
Blow molding machine for sale, fully functional. Manufacturer Extraplast Machinen GmbH Year 2008 Engine power 80kW Heating power 49kW Max. hydraulic pressure 250bar Max air pressure 10bar Working pressure 330 bar Form clamping 450 x 850mm Price negotiable - make an offer
new
Single-screw extruder • Type: 120/28 LD • AC Motor - 75 kw • Screw speed: 150 rpm. • Extruder cylinder: Air-cooled • Degassing zone Sieb changer • Strandhead Water bath: 4.5 m Granulator SG 200 Classic sieve Silo with conveyor fans: approx. 1m3
used
Strainer Bandera 150mm with 75kW motor. This machine has been overhauled by Deguma and little used after that. More info as attachment.
used
Single-screw rubber extruder with feed roller and degassing in screws of 70mm and a process length of 22.D - with two-speed temperature-controlled entagling screw - Degassing cylinder with device for static and/or vacuum degassing of the material - a vacuum block pump - two water temperature control units with 9kW heating capacity each, - a Siemens SPS S7 machine with Siemens KTP1200 HMI control panel - a directly driven feed roller feeder for rubber raw strips, a funnel-material stiffening system with Strip monitoring - temperable base body for tool holder and v.m
used
Farrel Twin Screw / Rollerdie Extruder complete available with Motor and Inverter Description attached!
used
Used Tecom E 70/30 S Extrusion - Single screw extruder Technical details in the pictures
used
see pdf attached
used
Single screw extruder - Screw diameter: 80 mm - Length: 90cm - With pre-mixing chamber heated with diathermic oil - Head cut - Loading hopper - Complete with electrical panel
used
Double carriage blow molding machine still installed and working, with siemens s7 plc, temperature adjustment from plc and possibility to store recipes.
used
CAPUZZI M20 + M22 + M25 mm corrugator line. OFFER: CAPUZZI CORRUGATOR TEAM composed of: - CAPUZZI CORRUGATOR EQUIPMENT made of water-cooled aluminum -3 sets of MOLDS for corrugated tube measures M20 + M22 + M25 mm. external diameter.
new
Furnace 1200 temperature range 100 - 1200 Celsius inner dimensions 1x1x2m power 50kW PLC could be various size industrijskih peći INDUSTIJSKIH PECI NIKOTIRANJE CEMENTIRANJE TERMIČKA OBRADA ČELIKA KALJENJE INDUKCIONO PLAMENO ALATNIH I KONSTR. ČELIKA ŽARENJE MEKO NORMALIZACIONO STABILIZACIONO CNC obradni centri za struganje Završno precizno struganje Brušenje nakon termičke obrade, Zatvaranje tolerancija - lanci mjera, Kombinovani postupci struganja i glodanja, Dijelovi za automobilsku industriju i industriju mašina od čelika obojenih metalą CNC 3-osni obradni centri, Konvencionalno glodanje za pripremu i doradu, Kombinovano CNC struganje i glodanje, Zat varanje tolerancija - lanci mjera, PEĆI ZA TERMIČKU OBRADU ZAŠTITNE ATMOSFERE PEĆI ZA TERMIČKU OBRADU SA ZAŠTITBNOM ATMOSFEROM NITRIRANJE,CEMENTACIJA, POBOLJŠANJA, ŽARENJA, CARBONITRIRANJE NITROKARBURIRANJ ...
used
Macchi extruder 160 cm for HDPE LDPE Bimetal 160 cm roller Capacity : 150 KG/hour Automatic bobbin change 37 KW ABB driver 11.5 meter height
used
used
used
used
used
used
3D Evo Composer 350 filament extruder, reviewed and ready to use.
used
Mikrosan 67 mm PVC Extruder It was used for production of PVC pipe Machine is in working condition
used
Barwell MR400 Top Load Ram Extruder
used
Mikrosan 90 mm PVC Extruder It was used for production of PVC pipe Machine is in working condition
used
This MAS 120E Extruder machine was manufactured in the year 2015 in Austria. It has a load of 182 kVa. The machine was completely retrofitted by MAS 2019 and since then not in production, Its condition is like new.
used
Capacity: 0 t (1) horizontal / (2) vertical: 0 Stroke: 0 mm Length of sleeve maximum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Clamping force: 150 to Stroke volume: 201 cm3 Ejector stroke: 150 mm Ejector force: 49 kN Pressure on material: 2218 bar Screw diameter: 40 mm from: 20 rpm up to: 300 rpm Mould heating: 20 kW Screw drive: 30 kW Machine´s weight about: 9000 kg Overall dimensions machine: Length: 5700 mm Width: 1650 mm Height: 2220 mm
used
Screw diameter 220 mm Processed material PET Flakes Drive Motor Siemens 225 kW + Simovert 6SE7 + Transmission Koellmann Unex70 Hydraulic drive dosing, hydraulic agregat Rexrorth
used
We can offer 2 twin screw extrusion compoundibg lines,manufactured in 2015 diameter 75mm, L/d 52. water circle pellitzer.drive motor power 160kw.short time working, very good condition.Serious buyers contact us.
used
Mikrosan PVC Extruder Twin screw extruder 90 x 26 Machine is in good condition
used
Mikrosan MCV 67/22 D Twin screw extruder New screws LD rate : 22 Max capacity : 140 kg hour Machine is in good working condition
used
We would like to sell Extruder Bandera T150 and Troester with included feeding line, cooling line and cutting sector. This machine was used for production of Neolite Rubber Sheets. More information upon request!
used
The "Epoch TM" extrusion casting apparatus (wide slot nozzle) has been designed and constructed for the thermoforming of polypropylene (heavy films). Operating fluids PA12, PP For other materials, contact must be made in advance with the manufacturer in order to check the processability. Specifications: Weight 839 kg. ; Power supply 230 V; number of zones cast body 14; Encapsulation block 2; KW total: cast body 21.9 KW; Auto Gauge 730 KW; Cast lip heating 3.4 KW; Additional equipment: internal edge boundaries with fixed length
used
Extruder for the production of three-layer LDPE film, German company Kifell. Capacity -150 kg/h. Foil thickness 0.03 - 0.2 mm. Width of upper rollers 1500 mm. Dolici double-sided winder 1230 mm. The width of the mouthpiece is 70 mm. Year of production 1985, in continuous production since 2010, available for viewing and testing in our company.
used
Automatic double wheel reel suitable for pipes from 10-32 mm OD Manufacturer: NEXTROM /Maillefer Type: MWB 1300G Year of construction: 1998 Condition: "as it is", ready for operation.
used
We sell lines 80/156, 65/132 and 55/110 for the production of WPC products (terrace boards, siding, fence boards, window sills, panels, logs, etc.) The equipment is installed at the enterprise, fully operational, and can be started. We will help with commissioning and training
used
Manufacturer: KNOLL Machine type: KTS-40-60-T-G Overall size: 550 x 600 x 1800 mm Output:18,5 kW RPM: 2930 Loading capacity is reliant on viscosity
used
Number of forming stages: 5, pressing force: 250t, max. wire diameter: 23mm, cutting length: 180mm, ejector stroke die/punch: 140/60mm, tool dimensions length/diameter knife: 70/56mm, die: 200/110mm, punch: 227/90mm, weight: 52t, with enclosure, an inspection is possible.
used
Screw diameter: 59mm, screw rotational speed: 25-250/min, with complete documentation, control cabinet, screen changer, side dosing unit, granulator and additional accessories.
used
Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control.
used
Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Screw Ø: 2x 67 mm L/D: 34:1 Motor: 97.5 kW (DC)
used
Was used for PVC, PUR and TPEV, with control cabinet, used screws and one used cylinder, with documentation, was maintained regularly.
used
Drive power: 110kW, with reversing Film Take-Off Kirion T 1300, Monoblow Head Kirion 120/300-1, further accessories and documentation.
used
PET films were produced on the extruder, working width: 650-800mm, output: 600-700kg/h, with cooling spirals, new extruder screw, degassing system, other spare parts and documentation, without dosing system, an on-site inspection is possible.
used
Material: PE, PP, PS, ABS // Details: DC motor, segmented screws and cylinders, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors, strand head, control cabinet for heating and motor control. Siemens Simatic OP17 controller Screw Ø: 2x 75 mm L/D: 36:1 Motor: 143 kW (DC)
used
Description Single Screw Extruder Screw diamter 60 L/D 25 Motor power 27,5 k