ex cello used for sale

Heat exchanging type: VES 8''SX 1 FV minimum temperature: -10 St C pressure: 18 bar not used

Qty. 1 Second-hand extrusion press Mfc.: SMS - Hasenclever Force: 2500 MT Built: 1990 Container for flat billets Width: 375 mm Height: 140 mm Billet length: 1000 mm Stem length, max.: 950 mm Consist of: Extrusion Press Body Cylinders Motors Hydraulic tank Qty. 2 Containers (8” & 9”)

Qty. 1 Second-hand extrusion press including (water-hydraulic system) Mfc.: Loewy - Hydropress USA Built: TBA Force: 12,000 UST Modernised: 2011 & 2014 (new PLC and control panels) Billet dia.: 14’’ – 26’’ (355.6 – 660.4 mm) Billet length: max. 65’’ (1651 mm) The press was used for the production of pipe up to 508 mm diameter and up to 50 mm wall thickness by the current owners. In 2011 the Press was partially rebuilt at which time all valves were rebuilt with new wear components, all brass was replaced for the container and rams and the loader table was rebuilt. In 2014 all new PLC Controls and the Control Pulpit were installed. Note: The water-hydraulic system is not included in the scope of supply due the system is also using for another extrusion press.

GEA Canzler spiral heat exchangers with milk pipe fitting on the input and output, Operating pressure:-1 to 6 bar Operating temperature:-10 to 200 C ° Volume: 32 liters Area: 10 m2 Number of screws: 12 Empty weight: 400 kg

Qty. 1 Second-hand extrusion press Mfc.: Kobe Steel Built: 1985 Force: 1500 MT Type: Horizontal 4 cylinders, indirect press, independent Control Billet dimensions: dia. 175 mm x 400 – 800 mm Length Application: Extruded?Copper?Alloys

Nr. 03 SINGLE-OVITE EXTRUDERS DIAMETER 100 Nr. 01 HEAD CONSTRUCTION 2 LAYERS

CALIBRATION TUNNEL COOLING TUNNEL LOADING TUNNELS EQUIPPED FOR DIAM TUBES. 20 TO 160 MM HOURLY PRODUCTION: 280-300 KG/HOUR

Cable Extension Sensors, Posiwire WS7.5-10000-HPROF-SB0, ASM, new Manufacturer: ASM Type: Posiwire WS7.5-10000-HPROF-SB0 Measure length 10000mm Attention! We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.

Cable Extension Sensors, WDS-40000-P200-M-S0, Miro Epsilon, new, Manufacturer: Micro Epsilon Type: WDS-40000-P200-M-S0 Measure length: 40000mm including test report Attention! We have set the lowest price for the new part on the market. We have other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.

Trilo SU 60 and SU 40 leaves and grass loading blowers on 1-axis chassis 80 km/h with road approval (ABE), equipped with Honda gasoline engine or hydraulic drive motor, 4-5 m long suction hose with hand socket for effective work handling. Further loading blowers are also available for attaching to the vehicle board or suction containers with integrated turbine in various sizes and variants. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

YEAR: 1988 HOURS: 12,000

GEA plate sterilizer 4 sections max working pressure: 16 bar max working temperature: 140 St C

Shut-off valve electr. "professional" Motor shut-off valve e/w galvanized Locking plate led to ball bearings 230v D= 220mm G&-4098-M385C

Dominioni Punto & Pasta Pasta extruder machine Stainless 8Kg hopper with agitator and stainless screw, variable speed, variety of extrusion plates for different style pastas, mobile

Biological exhaust air purifier for odour removal, exhaust air treatment, bio-air purifiers, biofilters, air scrubbers used The exhaust air filter can be used for odour disposal in wastewater treatment, waste management, oil mills and malthouses, biogas plants, landfill degassing, carcass recycling plants and slaughterhouses. The exhaust air is first passed through an air scrubber / humidifier and then through the biofilter material. There, the unened odours are neutralized. Manufacturer S&H GmbH & Co. Umweltengineering KG Year of construction probably 2006 Dimensions: approx. 10.5 m x 10.5 m + 2.5 x 5 m Surface filter 9 x 9 m (internal dimension) Filter material: 149 m3 biomix and 24 m3 oak wood Bulk height 2.14 m The side walls are made of PE panels with support made of galvanized steel. The filter was installed in a biogas plant. We also have other components of the s ...

Emolsion vacuum cleaner Make: Ringler Type: RI 502-D 4 kW 2895 rpm 400V, 50 Hz with suction hose, and various inserts Condition: barved, but functional Only to traders is sold. All information without guarantee

Various pressure expansion vessels with solid steel gas filling, built in 2008, unused 2x Pneumatex Statico SU 500.6 Pressure expansion vessels (steel), year of construction: 2008, cylindrical, 500L, 6 bar, diameter: approx. 680 mm, total height with feet: approx. 1588 mm, permissible temperature range: -10°C-120°C 4x Pneumatex Statico SG 1000.6 Pressure expansion vessels (steel), year of construction: 2008, cylindrical, 1000L, 6 bar, diameter: approx. 850 mm, total height with feet: approx. 2189 mm, permissible temperature range: -10°C-120°C (unused) 3x Pneumatex Statico CG 3000.6 E Pressure expansion vessels (steel), year of construction: 2008, cylindrical, 3000L, 6 bar, diameter: 1,300 mm, total height with feet: approx. 2936 mm, permissible temperature range -10°C â 120°C (unused)

MTU 8V396 TB 53 Heat Exchangers Charge Air Coolers Intercoolers 2930-12-334-9601 / 0010985920

MTU 8V396 TB 53 Heat Exchangers Charge Air Coolers Intercoolers 2930-12-334-9277 / 0052000675

MTU 12V396 SE 94 / TE 94 Exchangers Charge Air Coolers Intercoolers 2930-12-A07-0048 0030982820

MTU 16V4000 M 90 A BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7717 5260981120

MTU 16V4000 M 90 B BANK Heat Exchangers Charge Air Coolers Intercoolers 2930-12-378-7720 5260981120

JENBACHER TYPE 4 Heat Exchangers Charge Air Coolers Intercoolers J414 / J416 / J420 PNo:1202340

GUSCOR HGM560 / SFGLD560 Heat Exchangers Charge Air Coolers Intercoolers Part Number 7673532

JENBACHER TYPE 3 Heat Exchangers Charge Air Coolers Intercoolers 6141424 / 1212197 / 369829

MWM TCG 2020 V12/V16/V20 Heat Exchangers Charge Air Coolers Intercoolers Part Number 12452511

Suction system suitable for the offered plasma cutting system. New condition. Installation indoors and outdoors possible. Receptacle with quick release. Technical data â?¢ Connection power 11A â?¢ Air capacity 5000 m3/h 46 sheet metal processing machines for the production of angular and round air ducts, e.g. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 100 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 83 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x Flange DIN 11851 (milk pipe thread) Number of plates: 10 Last refrigeration/heat medium: water-glycol mixture Seals: EPDM

MTU 8V396 TB 53 2930-12-334-9601 / 0010985920

MTU 8V396 TB 53 2930-12-334-9277 / 0052000675

MTU 16V4000 M 90 A BANK 2930-12-378-7717 5260981120

MTU 16V4000 M 90 B BANK 2930-12-378-7720 5260981120

JENBACHER TYPE 4 J414 / J416 / J420 PNo: 1202340

GUSCOR HGM560 / SFGLD560 Part Number 7673532

GEA Plate heat exchanger NT50T CDS-10 with 10 plates in very good condition Material: 1.4405 Built: 2007 Min./Max. permissible pressure: 0 bar / 6 bar (both sides) Min./Max. permissible temperature: 0.0 °C / 150 °C Test pressure: 7.8 bar Volume: 0.82 / 1.03 L Kerb weight: 88 kg Width: 320 mm Height: 670 mm Depth: 600 mm Connections: 2x Flange DN50 2x DIN 11851 (milk pipe thread) Last heat medium: steam Seals: EPDM

GEA plate heat exchanger VT10 CDS-16 with 10 plates in very good condition Built: 03/2006 Min/Max permissible pressure: 0 bar / 10 bar (both sides) Min./Max. permissible temperature: -10 °C / 100 °C Test pressure: 13 bar Volume: 3.0 / 3.3 L Kerb weight: 133 kg Width: 290 mm Height: 920 mm Depth: 570 mm Refrigeration/heat medium: propylene glycol Connections: 4x Pipe nipple DN 50 Device can be inspected at any time in 76694 Forest upon request.

M 1105-02800 Machine type Cylindrical Grinding Machine - Universal Make ZIERSCH & BALTRUSCH Type URS 751 Built in 1982 Control type conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base from stock Technical details Grinding diameter 270 mm Grinding length 1000 mm Tip height 135 mm Total power requirement 7.5 kW Machine weight approx. 2.8 t Room requirement approx. 3 X 2.7 X 2.5 m Information ZIERSCH & BALTRUSCH Hydraulic Universal ROUND SCHLEIFMASCHINR Type URS 751 1982 built _________________________________________________ Tip height 135 mm Tip width/grinding length 1000 mm Tip width approx. 1100 mm Grinding wheel size: Through. x Width 400 x 50 mm Grinding spindle speeds (belts) 1,800 2,200 rpm Delivery path/rapid path 0.001 / 30 mm Grinding wheels delivery 0.0 ...

No.: L13457 Y.O.M.: 1990 Pressure working space: 4 bar Pressure double jacket: 4 bar Double-acting mechanical seal Locking pressure station speed-controlled scraper Condition good various spare parts: seals, mechanical seals Dimensions LWH: 1100 x 900 x 1750 mm Weight: approx. 900 kg

90-240 kN speed: 1,000 rpm

LIUGONG 9035 E

press capacity: 148 to material: Hartmetallstangen quality: Extrusionspressvorgang 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mobile excavator TEREX / Atlas Type TW160 Y.O.M. 2010 approx. 6,300 hrs - Hydraulic adjusting boom - Quick-change system for shovel - Gripper piping - Rear-view camera - Clearing sign (unused) available. - With Rototilt (shovel can be rotated and tilted 360 degrees. Additional grippers e.g. for setting telephone poles or lanterns. (last picture) Video can be submitted on request. The clearing sign was dismantled because the excavator was used as a two-way excavator with a rail handle (without DB approval). Mechanically very little stressed excavators. The enclosed clearing shield must be adjusted to the recording. Visually and technically good condition. Bdxbjqofbb Tires bad (can be renewed on request at an extra cost)

Suction slot duct system for passenger cars and trucks, exhaust extraction duct unit Npnfl Complete system with suction duct, trolley, suction hose, suction blower. Length approx. 20m, 3 suction hoses Aspirator

Turning + Thread cutting semi-automatic M32 The machine was never used for production. Suitable for internal and external threads max. diameter 90 mm max. turning length 45 mm max. thread pitch 1.5 mm max. thread length 14 mm Max. Thread pitch multi-speed 3 mm largest thread length multi-speed 21 mm Drive motor approx. 3 hp Machine weight 800 Kg

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

Saw for Pipe Cincinnati RS 25 PZ S 1992 year 4000 Euro

calender for PCV foil

Twin Screw Extruder Metalchem 2T9/4,5 for PCV, Made by Metalchem out-put 100 kg/h

Suction pipe: x 150 mm Details 2 pieces of flexible suction arms 3 m, without wall mounting / suspension

Compounding extruder Material: PE, PP, PS, ABS + fillers / Details: dcising, segmented screws and cylinders, degassing, vacuum pump, screw speed max. 300 rpm, DC motor 252 kW, heating power 98 kW, incl. side-feeding Leistritz LSB 90 (screws 2x x 90 mm, drive: 3.0 kW, screw speed: max. 150 rpm), Macromate SPS visualization. (attached photos are BEISPIELBILDER)