ex cell o used for sale

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 40 mm -Type: B2-32/20x40/3 TGL 10906 -Piston rod: Ø 20 mm / M12 -Holes: Ø 20 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 220/52/H75 mm -Weight: 1.8 kg/piece

Plasma cutting machine, plasma cutter for plasma cutting system, plasma/oxygen cutting system, servo motor, gear motor -Manufacturer: CR Electronic SRL / Power Automation, servo drive for plasma/oxygen cutting system -Cutting system: Type OXY 5.1 - 25 -Servo motor: Power Automation type PAT3-0190-60-560-B-S4-SRM50 -Individual components: see photos -Number: 2x drive unit available -Price: per unit -Dimensions: 475/240/H140 mm -Weight: 12.4 kg/pc.

Hose reel, hose unwinder, tank hose reel, wall-mounted reel, oil conveyor, hose reel, automatic hose reel, oil hose reel, oil filling station, compressed air pump for fresh oil, remote oil equipment, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, oil centrifugal gear oil pump -Manufacturer: MWH Märkisches Werk, oil hose reel with flow meter -Hose length: 7 m -Hand valve: with flow indicator -Dimensions: 550/130/H550 mm -Weight: 31 kg

Hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor -Manufacturer: Danfoss, hydraulic motor with gearbox -Hydraulic motor: Danfoss Type: OMP 50 151-0028 6 -Gearbox: Nord SK 01 FF i= 5.83 -Hole spacing: 106 x Ø13 mm -Shaft: Ø20 x 40 mm -Bolt circle: Ø 100 x 7 mm -Dimensions: 310/140/H180 mm -Weight: 13.5 kg

PLC control, central module, RAM, CPU, central device -Manufacturer: Siemens, Central Controller Simatic S5-100U CPU 102 -Type: 6ES5 102-8MA02 -Memory module: 1x 6ES5 275-OLA15 / 1x without photo type designation -Quantity: 1x assembly available -Price: per piece -Dimensions: 130/90/H135 mm -Weight: 0.7 kg/piece

PLC control, electronic module, interference filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter, noise filter -Manufacturer: Okaya, Noise Filter -Type: 3SUP-HL200-ER-6 -Voltage: 3x 500V 200A 50/60Hz -Dimensions: 480/200/H200 mm -Weight: 20 kg

Pipe reciprocating saw, pipe jigsaw, beam jigsaw, reciprocating saw, guide holder, pipe clamp -Manufacturer: Fein, holder for pipe reciprocating saw type AST 663 or similar -Clamping: with lashing strap -Number: 2x holders available -Price: per piece -Box dimensions: 390/310/H425 mm -Weight: 25 kg/piece

Hydraulic motor, oil motor, hydraulic pump, orbital motor, gerotor motor -Manufacturer: Sauer Danfoss, hydraulic motor -Type: N365 OMP 200 151-0615 -Hole spacing: 106 x Ø13 mm -Shaft: Ø25 x 45 mm -Number: 2x aggregate available -Price: per piece -Dimensions: 210/130/H120 mm -Weight: 7.1 kg/piece

Scissors, pneumatic scissors, air cutters, wire cutting scissors -Manufacturer: OPT, Air cutter, Pneumatic wire cutting shears from face mask machine -Type: AM-10 -Cutting blades: 100S / Cutting length approx. 46 mm, see photo -Quantity: 2 pairs of scissors available -Price: per piece -Overall dimensions: 210/35/H45 mm -Weight: 0.3 kg/pc.

Light barrier, ring light barrier, frame light barrier, inductive ring sensor -Manufacturer: di soric, ring light barrier, frame light barrier -Type: ORSD 20 P2K-IBS -Detection: metallic and non-metallic parts -Voltage: 10...35 V DC -Number: 10 sensors available -Price: per piece -Dimensions: 97/60/H20 mm -Weight: 0.1 kg/pc.

Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Omron, Power Supply -Type: S8VK-C12024 -Input: 100-240V 50/60Hz 2.6A -Output: 24V 5A -Quantity: 1 module available -Dimensions: 120/40/H130 mm -Weight: 0.6 kg

Speed control unit, speed controller, controller, motor controller, motor control, motor control controller, motor controller Manufacturer: Ott, Motor control motor controller -Type: K10024-02 -Motor control: M-BL-10-24 -Number: 2 controllers available Price: per piece -Voltage: 15VDC to 30VDC -Dimensions: 75/45/H105 mm -Weight: 0.2 kg/pc.

Scissors, pneumatic scissors, air cutters, wire cutting scissors -Manufacturer: OPT, Air cutter, Pneumatic wire cutting shears, unused, original packaging -Type: OPT AM-10/100S -Cutting length: approx. 46 mm, see photo -Quantity: 9 pairs of scissors available -Price: per piece -Cardboard dimensions: 235/70/H60 mm -Weight: 0.4 kg/pc.

Scissors, pneumatic scissors, air cutters, wire cutting scissors -Manufacturer: OPT, Replacement blades for pneumatic shears, unused, original packaging -Type: 100S -Cutting length: see photo -Quantity: 4x replacement blades available -Price: per piece -Cardboard dimensions: 160/50/H30 mm -Weight: 0.1 kg/pc.

TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Oerlikon, Inverter welding machine type CITISTICK 160 -Welding current range: 5-160A -Mains connection: 230V -Accessories: Welding cable with electrode clamp, ground cable -Dimensions: 430/300/H340 mm -Weight: 11 kg

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibel, timing belt pulley Ø 228 mm -Type: TB 90 8M 30 -Material: Cast iron -Number of teeth: 90 teeth / Belt width: 30 mm -Mount: Taper clamping bushing: optibelt 2517-30 Ø 30 x 45 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 228 x 45 mm -Weight: 7.1 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibel, timing belt pulley Ø 228 mm -Type: TB 40 8M 50 -Material: Steel -Number of teeth: 40 teeth / Belt width: 50 mm -Mount: Taper clamping bushing: optibelt 2012-32 Ø 32 x 32 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 106 x 60 mm -Weight: 1.9 kg/pc.

electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate, magnetic prism, magnetic prism -Magnetic prism: Magnetic measuring and clamping prism -Clamping surface: Length 74 mm -Prisms/Clamping surface: see photos -Magnet: can be switched on and off -Number: 2x magnetic prisms available -Price: per piece -Dimensions: 74/50/H55 mm -Weight: 1 kg/pc.

Temperature controller, temperature sensor, temperature setting, signal converter, temperature limiter, electronic temperature controller, process controller, PID controller -Manufacturer: Oumefar, Digital PID Temperature Controller -Type: REX-C100FK02-V -Quantity: 1 piece regulator available -Dimensions: 110/50/H60 mm -Weight: 0.2 kg

Granule dryer, granule drying system, granule conveyor, vacuum conveyor, vacuum station, drying container, vacuum suction conveying system -Manufacturer: Wuxi Oulongyu Automation Technology, granule conveyor vacuum suction conveying system -Type: OLY-FS300 -Dosing device: OLY CLY-FT20 -Individual components: see photos -Quantity: 1 device available -Dimensions: 860/800/H2360 mm -Weight: 244 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders, compact cylinders -Manufacturer: WEDA, Pneumatic cylinder compact cylinder with through piston rod -Type: WA-0605-50-P-OFS-DW -Stroke: 30 mm -Piston rod: Ø 16 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 124/52/H75 mm -Weight 0.5 kg/pc.

DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer: Ott, Servo geared motor BLDC worm gear motor -Type: TBSL043030010-110 -Voltage: 24 V -Speed: 300 rpm -Transmission: Transtechno i= 10 -Shaft: Ø 14 x 63 mm -Quantity: 1x geared motor available -Dimensions: 215/63/H95 mm -Weight: 2.3 kg.

Reflective photoelectric sensor, optical sensor -Type: OHG580/OHG-FPKG/US/CUBE -Sensing range: adjustable from 15-200 mm -Electrical design: DC PNP -Operating voltage: 10-30 VDC -Light type: Red light 624 nm -Reverse polarity protection: yes -Quantity: 2 available -Price: per package -Weight: 0.1 kg

Manufacturer: Brandt, Type: Optimat KD 77 C, Year: 1998, Program: Brandt, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 10, Edgeband height max mm: 60, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 11 , Premilling: no, Premilling: no, Mitre stations: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Radiusfräsen : yes, Schnellwechselmotore: yes, Flush/radius/chamfer milling: yes, Contour milling type: yes, Radius scraper: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Compressed air bar: 6, Noise enclosure: yes, Year :1998

General SKU390X1024 MakeHuzap TypeOktabin inliner closing machine Mach.No.20-7547 Main Features MaterialMild steel Motor5.5 KW Specified Features - Closing machine Motor5,5 kW, 400 volt Closing machines MaterialMild steel General Year of construction2020 LocationBarneveld Floor space4,32 x 2,20 m Total height3,50 m Weight1700 kg CEcheck Extra SpecificationsThe machine is used to weld/heat-seal (close) plastic inliners (bags”) in octabin containers. It is a mobile (movable) welding/sealing fixture that clamps and tensions the inliner foil and then performs the sealing weld. Application: heat-sealing/welding octabin inliners (plastic bags) Design: mobile/movable welding fixture (clamping + tensioning + sealing) Seal beam: 2200 mm Compressed air: 3.5 bar Air consumption: ~10 Ndm³ per welding cycle Drive system: lifting/lowering frame via gearmotor (SEW SA67 DRN80M4, 0 ...

Manufacturer: Weeke, Type: Optimat BP 145, Year: 2001, Control: Homatic 2000 IPC, Software: Woodworp, Working range X: 3250, Working range Y-axis: 1300, Working range Z: 100, C axis: yes, Feeding speed max m/min: 80/60/20, Pendulum processing: yes, Number of milling spindles: 1, Tool adaption system: HSK63F Kegel, Milling engine 1 hours power: 9, rpm 1): 1250-24000 FU geregelt, rpm 2): t, Number of tool changers: 1, Tellerwechseler: yes, Number of tools per tool-magazine: 8, Mitfahrender Werkzeugwechsler: yes, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 100, Drill vertical: 22, Saw unit: yes, FREE TEXT: 2x Freiplätze für zum Nachrüsten vorbereitet, Year :2001

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2007, Control: PC 85, Software: Woodwop, Barcode: Ja, Online connection: möglich, Operating system: Windows, Work piece width min-max mm: 70-1000(1300), Work piece length min-max mm: 200-2500, Work piece thickness min-max mm: 8-80, Working range X: 2500, Working range Y-axis: 1000, Working range Z: 80, Beschickungsband: 32, Vertical drilling station from below: 32, Drill support from top: 2, Drilling heads overall: no, Tool changer: 2, Drill vertical Y: 32, Horizontal drills-X: 32, Drill horizontal Y: 8, Zwischentransport: 2, Lock case moulding aggregate: 2 , Number of spindles: 2x2,7, Year :2007

Manufacturer: Weber, Type: OFZ-KS 2, Year: 1993, Control: Weber, Monting of the machine: Quer/lkombi-Schuh/längs, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350/4650 X 150, Rubber roller: 1, Shore roller 1: 150 mm (gummi), Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13/17, Band 1 Schleifbandgeschwindigkeit m/s : 11/22, Belt 2 shoe unit: Kombi, Band 2 Kombiaggregat Walze/Schuh: yes, Band 2 Leistung kW : 18,5, Band 2 Schleifbandgeschwindigkeit m/s : 2-20, Band 3 Kombiaggregat Walze/Schuh: schuh, Band 3 Leistung kW : 11, Band 3 Schleifbandgeschwindigkeit m/s : 2-20, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: 2, Combi unit roller/shoe: 1, Continous adjustable feeding speed m/min: 4-25, Intermediate sanding of lacquer: yes, Constant table hight: ...

Manufacturer: Weeke, Type: Optimat BHX 500, Year: 2008, Control: PC 85, Software: Woodwop, Barcode: yes, Operating system: Windows, Machining stations: 2, Work piece width min-max mm: 70 - 1.000 (1.250), Work piece length min-max mm: 200 2.500, Work piece thickness min-max mm: 8 - 80, 3 axis control: yes, Working range X: 2.500, Working range Y-axis: 1.000, Vertical drilling station from below: 1 = 36 Spindeln, Vertical drilling station from above: 1 = 36 Spinden, Automatic setting up: yes, Transmission station: yes, Spindles controlled from below: x=8/Y=2, Spindles retrievable horizontal: 1, Tool changer: no, Power kW 1: 6, Machining stations: 2, FREE TEXT: einschl. Beschickung und Igeltransport, Year :2008

Manufacturer: Homag mit Verleimteil, Type: Optimat BOF / 40 / G , Year: 2000, Control: WoodWOP, Programmierplatz Büro: yes, Work piece width min-max mm: 1050/1200, Min.-max. workpiece length in mm: 4800, Min.-max. workpiece height in mm: 60/200, C axis: yes, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 4, Aluminium sleeking table: yes, 2 station allocation: 2, Stops in the table front: 6 , Vacuum pumps m³/h: 120, Saw unit: yes, Edgebanding unit: no, Marking laser: Laserpositionerhilfe, Radial arm machine: yes, Foot mats: yes, Available: ca. 03/2017, Year :2000

Manufacturer: OTT, Type: M259, Year: 1994, Program: Ott, Min-max edge material mm: 0,5-3, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150-3000, Min.-max. workpiece height in mm: 10-60, Edgeband height max mm: 50, Min-max feed m/min: 8-24, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes steuerbar, radius milling: yes steuerbar, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Compressed air bar: 6, Noise enclosure: yes, Year :1994

Hersteller : Costa, Type: Optima 2000 CNC, Year: 1993, Control: CNI, Positioning of CNC axis: yes, Double edge bander: yes, Hand-over: yes, Longitudinal edge banding: yes, Sanding machine: no, Tool exchange places: yes, Working width min-max mm: 320-4000, Arbeitshöhe min-max mm: 30-100, Saw Units: 1, Double edge bander - milling units/side total: 1, Spindle length of double edge bander mm: 620, Double edge bander with stoppers: yes, Longitudinal milling units total: 5, Längsprofiler Fräsaggregate linke Seite: 2, Längsprofiler Fräsaggregate rechte Seite: 2, Längsprofiler Fräsaggregate linke Seite: 2, Longitudinal milling units horizontally: 1, Spindle length - longitudinal milling mm: 320, Spindle diameter - longitudinal milling mm: 50, Feeding speed min-max m/min: 2,5-23, Vorschub stufenlos: yes, inkl Werkzeuge, Year :1993

A CNC flatbed lathe Optimum is available. Swing diameter over bed/slide: 280mm/170mm, center distance: 700mm, spindle bore: 27mm, speed: 4000rpm, travel X/Z: 165mm/660mm, feed X/Z: 2m/min/3m/min, tool stations: 4, quill stroke: 85mm. Machine dimensions X/Y/Z: approx. 2000mm/750mm/1550mm, weight: approx. 450kg, control: Siemens Sinumerik. Documentation available. An on-site inspection is possible.

For sale is a small complete filling line for vinegar or oil in plastic bottles. Currently, the line is at 0.75 ltr. cylinders and has a maximum output of 4,000 bottles/h. The entire plant consists of the machines listed below: 1. Bunker for empty plastic bottles, about 6m long, capacity: about 400-600 containers 2. Kamman bottle sorting system type K23F Machine ensures that the bottles to be filled are transported out of the machine vertically, with the mouth facing upwards Sorting capacity: approx. 3,000-6,000 pieces/h 3. Conveyor belts 4. Leicht vacuum filler, make Cobert type Olimpia20/95 With 20 filling stations Dimensions: LxWxH: 1,520x1,250x2,330 mm Possible bottle diameter: 55-120 mm Built in 1989 6. Inkjet encoder, make REA-JET, for applying the lot marking or best-before date coding to the filled and sealed bottle Year 2008 5. Capper for plastic c ...

voltage: 380 V connected load: 7,5 kVA dimensions: 2725 x 1930 x 1773 mm weight of the machine ca.: 2500 kg --> Technical data Main data: --> Table surface: 605 x 300 mm --> Table longitudinal movement max. (manual): 750 mm --> Table transverse movement: 340 mm --> Grinding height between table/new grinding wheel min/max: 22.5 / 322.5 mm --> Standard size of magnetic clamping plate: 600 x 300 mm --> Workpiece weight incl. magnet: 420 kg --> X-axis / longitudinal movement: --> T-slots (number x width): 3 x 17 mm --> Table feed, hydraulic: 0.3 - 25 m/min --> Travel per handwheel revolution: 47 mm --> Y-axis / height movement: --> Automatic vertical feed - coarse in 12 steps: 0.001 - 0.03 mm --> Automatic vertical feed - fine in 8 steps: 0.001 - 0.01 mm --> Distance per handwheel revolution (x1/x10): 0.1 / 1.0 mm --> Graduation on handwheel (x1/x10): 0.001 / 0.1 mm --> Trigger strokes: 0 - ...

ORT RP30 C thread rolling machine 2-roll 30 tons electronic control of speed and position. Brushless motors for the rotation of the rollers Possibility to memorize the parameters for the piece., The machine is visible working in our warehouse in Gussago BS. Test possibility Mimu Machine Tools Rolling is a mechanical processing without chip removal that can be performed cold or hot, having as an aim the improvement of the surface finish (therefore the apathetic behavior of the material., Power (Ton): 30, Number of rollers: 2, PLC: YES

OMGA Radial RN 450 Radial Saw Cutting width 90° max 450mm Cutting height max 80mm Cutting deck adjustable in two planes Saw speed 3000r.p.m 2.21kw main motor Saw size 300mm Power supply 220V

Key data: 2790 KG, 3100 mm, 3750 mm

Hello, We hereby offer you a used pallet racking system (multi-station system) from Galler, type OMEGA. Manufacturer Galler Lager- u. Regaltechnik GmbH Type Omega Year of construction unknown Stand load max. 10,800 kg Load capacity/compartment max. 2,790 kg Stand height 3,750 mm Column depth 1000 mm Beam length (truss length) 3,100 and 3,400 mm Scope of delivery: 44 pieces stand 3,750 x 1,000 x 100 mm (H x D x W) 215 trusses 3,100 mm 14 trusses 3,400 mm 14 pieces of upright collision protection elements, long 985 x 120 x 55 mm (L x W x H) 10 pieces of upright collision protection elements, short 500 x 120 x 50 mm (L x W x H) 12 pieces ground bumper corner, green, 500 x 120 mm 13 pieces of ground bumper corner, yellow, 450 x 110 mm 1 piece ground bumper corner, yellow, 450 x 180 mm 2 pieces of uprights for double rows, plate 300 x 250 mm, stand height 350 mm 24 Piece ...

Manufacturer: Optimum Model: OPTImill F 105 CNC Sinumerik 808D ADVANCE Type of Machine : Milling Machine Condition : New Included Accessories: - CNC Tool Starter Set BT 40 - SPW 12 Clamping Tool Assortment, 58-piece - Hydraulic Milling Vise HCV 105 - 20 Liters Cutting and Drilling Emulsion AQUACUT C1 - 4th Axis Preparation Find more here - .ucymachines/ Contact us at - sales@ucymachines

Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price

PerkinElmer Spectrum One FT-IR Spectrometer Without a computer Without software Untested equipment

Professional organic waste recycling and fertilizer production line available for immediate sale.This complete installation is designed to transform poultry, cattle, or pig manure and organic waste into high-quality granulated organic fertilizer pellets. EcoCert compliant output. Produced in 2022. Fully operational and well-maintained. Technical Specifications - Capacity: up to 5 tons per hour - Condition: Fully operational, well-maintained - Year of Production: 2022 - Output: High-density organic pellets, EcoCert compliant Complete Production Process Compost Processing - Grinding - Mixing with Probiotic and Additive injection capability - Granulation - Drying - Cooling - Automated Packaging Applications - Poultry manure processing - Cattle manure processing - Pig manure processing - General organic waste recycling Key Investment Benefits Fast ROI: Converts waste management cost ...

Running direction: left - right Frequency-controlled for 26 mm crown corks Also suitable for PET bottles with crown corks

Inv. Num. : 9062 Type: OHP 6 Producer: ZAKO Created: GO 2023 Parameters: Control system: FENIX Maximum sheet metal plate width: 6000 mm

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibeltl, timing belt pulley Ø 228 mm -Type: TB 28-8M-30 -Material: Steel -Number of teeth: 28 teeth / Belt width: 30 mm -Mount: Taper clamping bushing: optibelt 1210-32 Ø 32 x 25 mm -Quantity: 8x timing belt pulleys available - Price: per piece -Dimensions: Ø 75 x 38 mm -Weight: 0.6 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibeltl, timing belt pulley Ø 228 mm -Type: TB 56 8M 30 -Material: Steel -Number of teeth: 56 teeth / Belt width: 30 mm -Receiver: Taper clamping bushing: TECNAMIC 2012-40 Ø 40 x 35 mm -Quantity: 2x timing belt pulleys available -Price: per piece -Dimensions: Ø 150 x 38 mm -Weight: 3.6 kg/pc.

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Manufacturer: optibelt, timing belt pulley Ø 228 mm -Type: TB 90 8M 30 -Material: Cast iron -Number of teeth: 90 teeth / Belt width: 30 mm -Mount: Taper clamping bushing: optibelt 2517-40 Ø 40 x 45 mm -Quantity: 6x timing belt pulleys available -Price: per piece -Dimensions: Ø 228 x 45 mm -Weight: 7.0 kg/pc.

Year: 2021 - technically efficient, ready to work – after full service - disc diameter: 600 mm - cut from below - cooling installation - vertical pneumatic clamps - work area lighting - compressed air preparation station

Used rotary vacuum filter from Dorr Oliver type Vacubloc – Drehfilter VT 8/10m2. Motor power 22kW. Year of manufacture 1983. Dimensions 769x900x210. Acid-resistant design.