ernault toyoda used for sale

Machine Details Stock-No. 1105-03882 Type of machine CNC Lathe - Inclined Bed Type Make ERNAULT TOYODA Type HES 52 Year of manufacture 1987 Type of control CNC Storage location FRANCE Country of origin france Delivery time immediately Freight basis EX WORK Technical details turning diameter 650 mm turning length 1100 mm control FANUC 10 T swing over bed 650 mm Spindle Bore 80 mm spindle turning speed range 7 - 4000 rpm transmission ratio 3 Rapid Traverse 12 m/min main drive 37 kW total power requirement 47 kW Weight of the machine approx. 12 t dimensions of the machine ca. 5 x 2.4 x 2. m Additional information 2-axes CNC-control FANUC 10 T 1 x 12-station turret VDI 50 programmable tailstock 3-jaw power chuck diameter 450 mm swarf conveyor

CNC Lathe 2 axes ERNAULT TOYODA HES 52 Travel X: 365 mm Travel Z: 2130 mm Numerical Command: NUM 750 Maxi Ø on bench: 480 mm Maxi Ø over saddle: 400 mm Max machinable length between points: 1983 mm Spindle diameter: Ø 79,5 mm Spindle speed: from 50 to 4000 RPM Turret 12 tools VDI 50 Year of construction: 1990 Motor: 37 kW Tailstock: CM5 Dimensions (L x W x H): 4585 x 3160 x 2550 mm Total length: 6135 mm Weight: 14,5 T

Spindle size: dia 200 / ISO 70 X travel: 6.000 mm Y travel: 4.500 mm Z travel: 1000 mm W travel: 1.250 mm Spindle speed: 800 RPM Rotary table: - Surface: 3600 x 3600 mm - Travel: 2000 mm

Horizontal bed milling machine make ERNAULT SOMUA type Z 1 CFabr. -No: 104470/333, built in 2/1970Table mounting surface: 1200 x 300 mmTable movement lengthwise: 700 mmY: 250 mmZ: 400 mmSpindle taperSpindle speeds Horizontal: 50 - 2500 rpmSpindle speeds Vertictal: 40 - 2000 rpmautomatic feeds f. along u. across the limit switchMotor power spindle approx.: 3 kWexternal dimensionsWeight approx: 1760 kgWith- Additional track control / cam control via connector panel- Coolant deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Retrofitted in 2005 electrical / CNC control Siemens 840 d Retrofitted in 2012 and 2019 mechanical what made. Technical datas: Rotary spindle speed: 1.25-600 tr/min Spindle maximum power: 55 kW 215 tr/min Horizontal run of the upright on the bench - X 15,000/30,000 mm . X travel 30,000 mm is for both machine Vertical stroke of carriage on upright - Y (mm) 5,600 mm Spindle stroke - 1,100 mm Z: Flowing stroke - w: 1,100 mm Advance - X: 3-5000 mm / min Feed - Y: 3-5000 mm / min Feedrate - Z: 1.5 2,500 mm / min Total weight: 100,000 kg Foundation pit OSTEO. for both machine Length x width x height: 40,000 x 5,000 x 1,800 mm all accessories are available and can be sold at extra costs. For both machines are the following attachments available: â?¢ Chip conveyor For both machines including lubrication and coolend unit for the cutting operation &aci ...

Machine details Stock number 1105-03330 Machine type guide and pull spindle lathe Make ERNAULT-SOMUA Type Cholet 550 Year of construction 1990 Control type conventional Storage location FRANCE Country of origin France Delivery time immediately Freight base EX WORK price Technical details Turning diameter over bed 550 mm Turning diameter via support 500 mm Turning length 1100 mm Tip height 250 mm Spindle bore 52 mm Inner cone 136 Spindle speeds 32-1800 rpm Feeds - bed slide / lengthwise 0.05-07 mm/w Feeds flat slide 0.033-0.45 mm/min Total power requirement 13 kW Weight of the machine ca. 2,3 t Space requirement approx. 2870 x 940 x 1400 m Information accessories: PARAT steel holder 4 STUCK 3 bake lining dia 250mm 2 AXIS DIGITAL

dimensions: 3500 x 3000 mm max load: 50 ton longitudinal travel: 2700 mm rated torque of turning motor: 22 mkg circular feed: 0,0006 gt; 0,6 rpm rated torque of longitudinal travel: 9,4 mkg 13 T-slots (width 36 mmnbsp; H7) power: 50 kVa weight: 31 ton

Lathe H.Ernault 250HN This lathe is brand H. ERNAULT Batignolles type 250HN, it has been used very little, the interpoint is 2m.

weight: 56000 kg engine output: 75.00 kW longitudinal stroke: der Senke 800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Including 3-jaw chuck, Multifix type B base holder, tailstock, documentation Drehlänge: 1,000 mm, turning diameter over bed: 350 mm, turning diameter over slide: 170 mm, spindle bore: 50 mm, weight approx.: 1,800 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,000 x 1,500 mm

turning diameter over bed: 435 mm turning diameter over slide rest: . mm turning length: 750 mm turning speeds: U/min digital readout: digital readout: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Parallel Lathe ERNAULT SOMUA CHOLET 350 Between points: 900 mm Maxi Ø on bench: Ø 90 mm Maxi Ø over saddle: Ø 180 mm Spindle diameter: Ø 42 mm Spindle speed: from 45 to 2000 RPM 3-jaws chuck Ø 250 mm Threadings Metric + Whitworth Tailstock CM4 Auto feeds longitudinal + transverse Voltage: 380 V Dimensions (L x W x H): 2500 x 1100 x 1300 mm Weight: approx 1,7 T

Coolant tank with pump ERNAULT-TOYODA 250 liters (z.b. for Ernault-Toyoda HES52) Pump 120 l/min 3.5 bar 1.1 kW 220 / 380 V used, tested ! Dimensions: 1400 x 1100 x 750 mm

x-travel: 630 mm y-travel: 700 mm z-travel: 630 mm Control: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mm Table load: 400 kg number of spindle speeds: 300 - 20.000 min-1 total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table length: 1750 mm Table width: 800 mm Longitudinal X: 1600 mm Cross Y: 800 mm Vertical Z: 800 mm Positions ATC: 48   Positions APC: 0   CNC Brand: Fanuc WELE - TOYODA AA1680 VMC X 1600 x Y 800 x Z 800 mm MACH - ID 6271 Make: WELE Type: TOYODA AA1680 Control: FANUC 18i-MB YOP: 2012 Hours: 3953 X – Travel    1.600 mm Y – Travel       800 mm Z – Travel       800 mm Table Length       1.750 mm Table Width     800 mm Table load         2.000 kg Spindle Taper     40 ISO/Bt/Mk Power on spindle      15 kW Speeds / ranges       12.000 Rpm ATC / revolver        48 Coolant true spindle / Bar        25 Number of controlled ax ...

Table length: 1750 mm Table width: 800 mm Longitudinal X: 1600 mm Cross Y: 800 mm Vertical Z: 800 mm Positions ATC: 48   Positions APC: 0   CNC Brand: Fanuc CNC Model: 18 i MB MACH-id   4105 MAKE       TOYODA WELE TYPE         AA 1680 / FV 1680 YEAR        2012 SPECIFICATIONS X - Travel      1600 mm Y - Travel        800 mm Z - Travel         800 mm bed / plano / portal / moving column      VMC Controll     Fanuc 18 i MB Table Length x Width       1750 x 800 mm Table load in kG        2000 Kg Spindle Taper     Bt 50 kW power on spindle   15 kW Spindle speeds / ranges    12000 Rpm ATC tool changer      48 ...

Pallet length: 450 mm Pallet width: 450 mm Longitudinal X: 600 mm Cross Y: 600 mm Vertical Z: 600 mm Number of pallets: 0   Positions ATC: 60   CNC Brand: Fanuc CNC Model: FANUC 18i-MB X - Travel:               600mm Y - Travel:               600mm Z - Travel:               600mm B-Axis indexing:          360.000° Table Length:             450mm Table Width:              450mm Table load:               400 Number of pallets:        2 Feed rate X-Axis:         50000mm/min. Feed rate Y-Axis:         50000mm/min. Feed rate Z-Axis:         ...

Power Supply LFE BR4G 2410-A1 ( BR4G2410-A1 ) 230 / 400 V AC 24 V DC 18 A spare part for Toyoda HES52 ! used, checked ! Dimensions: 290 x 140 x 140 mm

digital servo controller, AC Servo Driver GEC, NUM SA501SD NUMDRIVE SPINDLE spare part for Toyoda HES52 ! used, checked ! Dimensions: 380 x 240 x 650 mm

Electronic module, machine control NUM S.A. Type 760 3x Input / Output Module 1x Memory Module 2x Control Module 1x Input Module 1x Processor Module 1x Power Supply 220 V AC 50 / 60 Hz spare part for Toyoda HES52 ! used, tested ! Dimensions: 485 x 260 x 300 mm

Electronic Module, Input / Output Module NUM S.A. Type 750 / 760 ( 750/760 ) E/S 3.2 200425 Spare part for Toyoda HES52 ! used, checked ! Dimensions: 263 x 183 x 31 mm

Electronic module, input module, 32 inputs NUM S.A. Type 750 / 760 ( 750/760 ) ENTREES V3 201182 Ersatzteil für Toyoda HES52 ! used, checked ! Dimensions: 263 x 183 x 31 mm

Electronic Module NUM S.A. Type 750 / 760 ( 750/760 ) AXES V2 200920 Spare part for Toyoda HES52 ! used, tested ! Dimensions: 263 x 183 x 21 mm

This TOYODA FH63S Horizontal Machining center was manufactured in the year 2002. It is equipped with a Fanuc Series 16i-M control unit. The machine has a spindle speed of 15000 rpm.

Electronic Module NUM S.A. Type 750 / 760 ( 750/760 ) AUTO V3-24K 200900 mit 200608E spare part for Toyoda HES52 ! used, checked ! Dimensions: 263 x 183 x 21 mm

Electronic Module NUM S.A. Type 750 / 760 ( 750/760 ) AXES V2 200823 Spare part for Toyoda HES52 ! used, tested ! Dimensions: 263 x 183 x 21 mm

Electronic Module, Memory Module NUM S.A. Type 750 / 760 ( 750/760 ) MEMOIRE 256/512 266342 200715 with 200277 / F3 and 200687 / F3 spare part for Toyoda HES52 ! used, checked ! Dimensions: 263 x 183 x 21 mm

Bremswiderstand FANUC, IWAKI A40L-0001-0191 15 Ω Ersatzteil für Toyoda HES52 ! used ! Dimensions: 300 x 105 x 100 mm

Electronic Module, Processor Module NUM S.A. Type 750 / 760 ( 750/760 ) PROCES V2 200432 200433 with 200616 / E spare part for Toyoda HES52 used, checked ! Dimensions: 263 x 183 x 21 mm

Circuit breaker KLÖCKNER-MOELLER PKZM3-25 16 - 25 A 220 - 660 V Ersatzteil für Toyoda HES52 ! used, tested ! Dimensions: 110 x 85 x 135 mm

Electronic Module, Power Supply NUM S.A. Type 750 / 760 ( 750/760 ) ALIMENTATION V2 201001 220 V 50 Hz spare part for Toyoda HES52 ! used, checked ! Dimensions: 263 x 200 x 61 mm

Motor Control, Servo Control GOULD, GETTYS N360 N360-10041 Ersatzteil für Toyoda HES52 ! used, tested ! Dimensions: 240 x 130 x 265 mm

Monitor, TFT-LCD Industrial Monitor UNIPO UFP 8.4 ( UFP8.4 ) 2TT0801CDN00N 84 - 264 V AC 47 - 63 Hz max. 40 W 8.4 Screen Spare part for Toyoda HES52 ! used. tested ! Dimensions: 240 x 210 x 185 mm

Motor Control, AC Spindle Servo Unit FANUC A06B-6059-H003 Spare part for Toyoda HES52 ! used, checked ! Dimensions: 380 x 250 x 170 mm

Relay module MORS 681.039.2 2 x Relay TEC 1401831100 24 V DC Spare part for Toyoda HES52 ! used ! Dimensions: 70 x 50 x 75 mm

Relay module MORS 681.039.2 1 x Relay TEC 1401831100 24 V DC Spare part for Toyoda HES52 ! used ! Dimensions: 70 x 50 x 75 mm

Connection module MORS 681.035.1 Spare part for Toyoda HES52 ! used ! Dimensions: 70 x 50 x 50 mm

Connection module MORS 681.035.2 Spare part for Toyoda HES52 ! used ! Dimensions: 70 x 50 x 50 mm

Control Panel, NUM 760 Front Panel NUM S.A. Type 760 200228 1356 Ersatzteil für Toyoda HES52 ! ohne Monitor ! used, tested ! Dimensions: 485 x 90 x 400 mm

Handwheel JAKOB Impulses per revolution: 100 Flange: 108 x 108 mm spare part for Toyoda HES52 ! used, tested ! Dimensions: 110 x 110 x 120 mm

Circuit breaker SIEMENS 3VE1010-2E 0.4 - 0.63 A 380 - 660 V spare part for Toyoda HES52 ! used, tested ! Dimensions: 85 x 55 x 90 mm

Circuit breaker SIEMENS 3VE1010-2M 10 - 16 A 380 - 660 V Spare part for Toyoda HES52 ! used, tested ! Dimensions: 85 x 55 x 90 mm

travel -x axis: 1.000 mm travel -y axis: 850 mm travel -z axis: 750 mm spindle turning speed range: 35 - 6.000 U/min numbers of positions in the tool changer: 60 table dimension - longitudinal: 630 x 630 mm control: FANUC16i, Milling machining centers - horizontal | TOYODA - FH63S equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000  0,001 deg The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630 | FH63 | FH-63 | FH 63 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindle speeds: 6.000 U/min tool taper: BT50 numbers of positions in the tool changer: 121 control: FANUC31iMA Milling machining centers - horizontal | TOYODA - FH630SX equipped with ITC and chip conveyor. Additional equipment: + Full NC table 360.000  0,001 deg The machine is in a well-maintained condition and can be inspected at any time under power. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DC motor with tachogenerator and forced ventilation, DC shunt machine BULL, NUM NUM SPINDLE MOTOR MK 3 ( MK3 ) 180 S < br /br />37 kW 1150 / 1520 / 4350 rpm 302 / 380 / 380 V external excitation 180 V shaft: Ø 48 mm forced ventilation 1,1 kW 380 - 440 V AC spare part for Toyoda HES52 ! used, checked ! Dimensions: 1150 x 450 x 670 mm

Central lubrication MECAFLUID GR 200LPM01 Tank capacity: approx. 5 l Engine: SKF 56/4 90 W 220 / 380 V IP55 spare part for Toyoda HES52 ! used, checked ! Dimensions: 275 x 170 x 360 mm

Type: FV 1165 Parameters: 1100 mm, 650 mm Manufacturer: Toyoda Year of production / SO / GO: 2010 / - / - Description: The machine is in good technical condition. X-axis feed: 1100 mm Y-axis feed: 650mm Z-axis feed: 600 mm Max. speed: 8000 rpm Number of tools in the magazine: 40 Work table dimensions: 1300 x 650 mm Upon agreement, the possibility of a tour in progress.

This TOYODA FH 400 J Horizontal Machining center was manufactured in the year 2014 in Japan and has 36057 production hours. It is equipped with a Fanuc Series 32i-Model A control unit. The machine has a spindle speed of 15000 rpm.

3-jaw chuck, three-jaw chuck PAGUS Ø: 380 mm bolt circle Ø : 235 mm bore Ø : 108 mm height: 180 mm Was used on a Toyoda HES52 with many accessories ! used, checked ! Dimensions: 380 x 380 x 180 mm

Description: 2 Ton lifting capacity fork length 900 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 1,900 x 2,500 mm, weight approx.: 2,000 kg