engines used for sale (1,691)

WEG NBR 7094~ ~ 3 160 M No. 0298 NA 98795 INDUCTION MOTOR M2 60 COD: N HP 15 (20) RPM: 3540 F3 1.15 (53) F 80 K 7.7 IP 55 220/380/440 V 50.0/ 28.9/25.0 A

motor pump Scania Ds11 6-cylinder in-line engine

Hello all, We have in our stock in Istanbul Turkey 3 Wartsila W32 Cylinder head covers in almost brand new condition (slightly used) Standart exhaust seat bores, No cracks or wielding Water pressure tested With reports available Please contact us at info@fin-marine.com Regards

Due to new motorization in the rotating state Removed The engine was installed by us at that time and from 0 to 53,000 turning hours with us very well fought

There are 2 engines of it. One was the spare engine! Engine low runtime. 1 hour a day every 4 days for testing purposes. Motor overhaul 2009. Electrodes little worn. See photo nameplate for 6000V, 50 Hz, power 1000kW, 1480 1/min. V=595 / A=1020

Daedong D 3-110, 3-Cyl., 1127 cm³ displacement, 18 kw/24 HP/ 3000 1/min. Incl. starter, alternator, generator flange SAE 5. as well as Daedong D 4-150, 4-cyl., 1502 cm³ displacement, 24 kw/32 hp/ 3000 1/min. Incl. starter, alternator, generator flange SAE 5.

Output 615 HP Speed 2300 rpm Type of cooling water Number of cylinders 12 With ZF BW160 Type Gear box

Semt Pielstick Marine Diesel PA4-185 GANZ-MAVAG-SEMT PIELSTICK Possibly sold in parts !

Three-phase motor brand new, WEG-Bosch, 280S/M02, IP55, B3, 2,980 rpm, 75/85 kW, 380/660 V, also suitable for 415, 440, 460 V, 50/60 HZ

Unbalance motor The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Unbalance motor electric motor Voltage 220 / 380 Volt Power 0.185 kW Speed 1400 rpm The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

MAN 9L32/40 complete engine 3 pieces available Each engine 4320 Kw at 720 Rpm Also able to sell crankshaft / spare parts or the cylinder block please contact: info@fin-marine

Rolls Royce Bergen B32:40 L6P engines for sale in our stock in Istanbul Turkey Bergen B32:40 L6P complete engine with turbo charger In our stock in Istanbul 3 pieces available year: 2002 3000 kw 750 RPM in good condition please contact : info@fin-marine.com

Bow jet engine overhauled

Viesse pump RB316BGT with electric motor recon Ball bearings renewed from rotor The pump was overhauled with the following new parts: - Impeller - Mechanical seal - Gasket set - Valve flap

Key data: 102 , 1500

Diesel engine Deutz BF4M1013EC Deutz BF4M1013MC Generator Motor New 1500 rpm

Key data: 30 , 1500

Generator Motor 32 KW at 15001 rpm

New liner including class acceptance

KKK Turbocharger Overhauled K44 UB19 W8286 Q6 Ausf Nr 5344 990 6001

Key data: 132

Used Deutz A12L614 diesel engine Year of construction : 1955 Air-cooled 12 cylinders 180 hp Clutch power : 132,39 KW Engine has run after major revision only very few hours !

power capacity: unbkt. kWvolt: unbkt. Vampere: unbkt. Atotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: unbek. kWvolt: unbek. Vampere: Atotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: unbek. kWvolt: unbek. Vampere: Atotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: unbek. kWvolt: unbek. Vampere: Atotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: unbek. kWvolt: unbek. Vampere: Atotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: unkbt. kWvolt: unbkt. Vampere: unbkt. Atotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0 kWvolt: 0 Vampere: 0 AData please see typeplate.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: unbkt. kWvolt: unbkt. Vampere: unbkt. Atotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

power capacity: 0 kWvolt: 0 Vampere: 0 Anew motor with options G45 und K42Data please see typeplate.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Data please see typeplate.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.