engine block used for sale

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Roller height: 850 - 1500 mm adjustable -Roll: Ø 80 x 840 mm -Plate below: Ø 480 mm -Price: per piece -Number: 2 pieces -Dimensions: 915/480/H850 mm -Weight: 44 kg/piece

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Rolls: Ø 89 x 330 mm -Roll width: 330 mm -Dimensions: 435/580/H720 mm -Weight: 20.5 kg

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Roll width: 295 mm -Dimensions: 480/420/H845 mm -Weight: 12.8 kg

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Castors height: 845-1350 mm adjustable -Roll width: 300 mm -Dimensions: 480/420/H845 mm -Weight: 9 kg

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Castors height: 620-1040 mm adjustable -Roll width: 355 mm -Dimensions: 480/480/H620 mm -Weight: 16 kg

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Hydraulic control block comes from a Hitchi Seiki HC400 machining center -Manufacturer: Nachi-Fujikoshi -Valve type: SL-G01-E3X-GR-Ci-11 -Valve type: SL-G01-C5-GR-C1-11 -Voltage: 110 V -Pressure: max. bar -Price: for all 6 pieces of valves -Dimensions: 158/45/H84 mm -Weight: 1.5 kg

4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Hydraulic control block comes from a TRUMPF punch type Sunimat 400 -Manufacturer: Yuken -Valve type: MSW-01-X-30 -Valve type: FHCG-02-30-N-A100-1004 -Valve type: DSG-01-2B2-A100-5032 -Voltage: V -Pressure: max. bar -Dimensions: 340/290/H360 mm -Weight: 50 kg

Module carriers, subracks, terminal blocks, spring clips, controls, switchgear, PLC -Module carrier lengths: 2x 534 mm 1x 380 mm -Field terminals: 36-pin and 72-pin -Weight: 2.8 kg

Plummer block housings, plummer block housings, pillow block plummer block housings, plummer block housing units, plummer block housing units, plummer block bearings SKF, plummer block housing units -Manufacturer: SKF -Type: bearing block SNL 213 -bearing to be installed: abbreviation -Number: 12x plummer block housings available -Price: per piece -Dimensions: 275/110/H150 mm/piece -Weight: 6.2 kg/piece

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Roll height: 735 mm -Roll width: 400 mm -Dimensions: 420/430/H735 mm -Weight: 46 kg

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Castors height: 475 mm adjustable -Roll width: 280 mm -Dimensions: 380/380/H480 mm -Weight: 64 kg

Contact expansion block, safety relay -Type: PZE X4 24VDC 4n/o -Number: 76x shooters available -Price: per piece -Weight: 0.2 kg/piece

Plummer block housings, plummer block housings, bearing blocks for shredders, shredders, water mills, hackers, cutting mills, granulators, cutting granulators -Quantity: 1 piece plummer block housing made of steel for heavy use -Type: bearing block inner diameter: 320 mm -Axis / center of housing: 190 mm -with: shaft sealing washers -Number: 1x bearing block available -suitable for: stock code 22236/22330/23064/23138/23236, not included in delivery -suitable for: bearing code 22236K / 22330K / 23064K / 23138K / 23236K, not included in deliver -Dimensions: 560/190 / H395 mm -Weight: 228 kg

Key data: 537 , 400

Pro2 container unit with 537kW el. Performance as a pure power generator incl. heat recovery system - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TCG2016V12 - 537kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current operation hours about 87,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling wat ...

Pro2 container unit with 311kW el. Performance as a pure power generator - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V8K - 311kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current bra number only about 95,000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for th ...

Hard rock slab, granite slab, granite block, measuring cube Hard rock block, angle block precisely machined on all sides The granite top comes from a measuring machine Dimensions of the large table surface L x W x H: 1350 x 1000 x 300 mm Dimensions of the small table surface L x W: x H: 1350 x 300 x 245 mm- 5 pieces of shelter blocks with levelling screws approx. 400 mm- 8 pieces of threaded bushings in the table surface with M10 (hole spacing 500 x 250 x 250 x 250 mm) - 4 pieces of threaded bushings M16 - small chipping on the edge of the plate Overall dimensions L x W x H: 1350 x 1350 x 300 mm Dead weight measuring plate: 1500 kg Dead weight granite feet: 100 kg very good condition; used

Gauge blocks, reference standard PAGUS 6.875 - 9.975 mm 101 parts 44 Additional parts: 1x 1.001 / 3x 1.005 / 1x 1.02 / 2x 1.05 / 2x 1.07 / 1x 1.1 mm 2x 1.15 / 4x 1.2 / 2x 1.25 / 5x 1.3 / 1x 3.0 / 1x 6.5 mm 11x 7.0 / 1x 7.5 / 2x 8.0 / 1x 9.0 / 2x 9.5 / 1x 13.0 / 1x 15.0 mm im Wooden box used, checked ! Dimensions: 360 x 195 x 45 mm

MachineApplications: manufacture of paving, kerbs, concrete blocks for masonry, foundation, pillars, floor slabs, chimney stacks, gutters, roadway gutter covers. 1 Advantage: Powerful vibration provided by 2 electric motors Tamper head equipped with 2 vibration motorsSchneider Electric electrical control and command components Our wide range of moulds can ensure a diversified production. Reliable mechanical and hydraulic systems. Component parts from trusted pateners: Drive: electrical and hydraulic Operate: Mostly manual (commands executed automatically: stop vibration when reaching height, start/ stop exhaust line) Concrete mould supply: Mechanised with hydraulic control Optional equipment: ) Auxiliary equipment for the paving and kerb finishing (hopper and drawer) Production cycle automation Electrical panel with PLC + HMI + software Automatic elevator with product panels f ...

Ground paver Knauer TYPE Komet 104 C built in 1980. Manual machine for small quantities or trial productions. Stone height maximum 50 cm For hollow blocks, chimney blocks, lightweight concrete blocks, etc. Very robust machine, with manual hydraulic control. The electrics are very simple and easy to repair. The machine is ready for operation and was still used for special stones until the introduction of a new fully automatic machine. It is well maintained. However, all guides and drives are in order and well lubricated. Without mold shaker and mold, these are in the photo, but are not included. Spare parts are also still available and could be purchased at the time of sale.

ID3105 Löffler Stone block saw / Steinblocksäge year/Year of construction 2008 Stone block saw, saw blade diameter 2000mm, cutting height 80cm. Track length 20m, cutting length 3300mm. Sold without turntable. Engine power 75kW FU controlled.gearbox 2021 overhauled, engine year 2021 new, support height & side new guided and stored 2023. Stone block saw, saw blade diameter 2000mm, cutting height 80cm. Track length 20m, cutting length 3300 mm. Sold without turntable. Motor power 75kW FU controlled. Gearbox overhauled in 2021, engine built in 2021 new, support height & side rerouted and mounted in 2023

Key data: 600

MWM TCG 2016V12 600 kW el. power, 50 Hz after main overhaul with, also prepare TC, Intercooler, alternator) genset. Fully completed - also possible option add: control panel, power switch automat, container, cooling an heat system.

ID2149 Pedershaab Multiflex – Plant for the production of concrete pipes Plant for the production of concrete pipes, little used, with concrete feeder, with 10 jackets for 1m pipes, with 4 cores (300, 400, 500, 600 mm diameter) for 1m pipes, with approx. 90 base sleeves, output approx. 60-70 pipes per 8 hours, ready for use Plant for the production of concrete pipes, little used, with concrete feeder, with 10 pieces of jackets for 1m pipes, with 4 cores (300, 400, 500, 600 mm diameter) for 1 m pipes, with approx. 90 pieces of lower sleeves, capacity approx. 60-70 pipes per 8 hours, ready for use

Pillow block housing, 2 pcs SNR SNC 516-613 SNC.516613S1000 Dimensions (pillow block housing): 315 x 115 x 175 mm New ! Dimensions (packaging): 330 x 270 x 190 mm

Pillow block bearing, with tension bearing INA RA SE70 housing: GG. ASE14 Tension bearing: GE 70-KRR-B shaft diameter: Ø 70 mm New ! Dimensions: 260 x 65 x 156 mm

Hook Hook Bottle, Crane Bottle, Lower Bottle, Pulley, Wire Rope Clamp, Two CARL STAHL 8000 kg Load capacity: 8 t ( 8000 kg ) rope Roller diameter: Ø 250 mm rope diameter: Ø approx. 25 mm single hook with safety hook opening: 45 mm Material: steel used, tested ! Dimensions: 830 x 270 x 210 mm

Hook block, crane bottle, lower bottle, pulley, wire rope, single-rolled, foldable CARL STAHL 3000 kg Load capacity: 3,0 t ( 3000 kg ) pulley diameter: Ø 200 mm rope diameter: Ø approx. 20 mm single hook with safety hook opening: 40 mm Material: steel used, checked! Dimensions: 580 x 215 x 115 mm

Blockleimpresse / Block Gluing Machine Muero 4 x 5000 A3 WT 2 1 Pressing stations with stack high of 50cm 1 Drying hot air blower Stapelhoehe / Stack high max. 52,5cm Pressenbreite / Press width max. 52,5cm Pressentiefe / Press deep max. 32cm Gewicht / Weight approx 60 KG Power supply 230 V - 1100/2150 W Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Comments: can be used as Short/ Longblock - needs dev. overhaul Item Code: 1110006u Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 312 Gas Type: Natural Gas Design No: B895 Eng Ser No: 4169021 Unit Ser No: 4169121 Orig PoOutput kWm: 646 YoM: 2004 powerup.at - Technology is our drive. Efficiency our focus.

Comments: Vers. C501 Depositmotor can be used as Short/Longblock - needs devinetiv overhaul! Item Code: 1110912u Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 312 Gas Type: Biogas Design No: I810_1 Eng Ser No: 1010704 Orig PoOutput kWm: 392 YoM: 1998 powerup.at - Technology is our drive. Efficiency our focus.

Comments: Vers. B01 Depositmotor Item Code: 1110764u Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 316 Gas Type: Natural Gas Design No: 5936 Eng Ser No: 1225455 powerup.at - Technology is our drive. Efficiency our focus.

Comments: Crankcase with Camshaft and gear drive, Crankshaft is missing.Only 30k operating hours. Item Code: 1108860u Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 612 Gas Type: Biogas Design No: D851 Eng Ser No: 5030391 Orig PoOutput kWm: 1029 YoM: 2007 powerup.at - Technology is our drive. Efficiency our focus.

Comments: prebuilt engine - Version C Crankcase with crankshaft and Camshaft Item Code: 1108697o Scope: Undefined Block manufacturer: Jenbacher Engine Type: J Engine Serie: 612 Gas Type: Natural Gas powerup.at - Technology is our drive. Efficiency our focus.

Engine type: 18V34SG Electrical power output: 5500kWe, 6838kVA Engine speed, direction: 750rpm, CW Generator type: ABB HSG 900XS8, 15kV, 50Hz Engine control system: WECS 3000 Turbocharger: Napier NA 355 Fuel: Natural gas Application mode: Cogeneration power plant Year: 1995 Running hours: 54855 h Running hours since last overhaul (48721rhs, 05.2010) 6131 h Next major overhaul: 64000 h Original installation: Denmark Genset condition: Excellent Stopped: 08.2022 Service history and documentation: Available Location: Denmark (will be in Hungary 2024 Q2) Scope of supply: Genset Heat recovery Gasramp Silencer lube oil tank Starting air compressor and vessel

valve block EATON 2x V28 0.2 - 10 bar 4x Control solenoid: 220 / 240 V AC, 50 Hz 1x Input: 3/4 ( inch ) 4x Output: Ø 12 mm ( hose inner diameter ) New ! Dimensions: 195 x 185 x 85 mm

Valve block EATON 3x 2HB25 0.3 - 10 bar 6x Control solenoid: 220 / 240 V AC, 50 / 60 Hz 1x Input: 3/4 ( inches ) 6x Output: Ø 12 mm ( hose inner diameter ) New ! Dimensions: 270 x 250 x 100 mm

Vogelsang Lobe pump. Serie nr: 02 4476 Max. Drehz 650 u/min Max Druck 10 bar Bauwjahr: 2002 Edelstahl

Complete plant for the production of L bricks and wall panelsMould list : 7 pieces of wall panel formwork 12 cm Pos. 1 Masonry panel formwork 550 / 800 x 490 mm Number of wall panels : 12 pieces 550 x 490 mm 12 pieces 550 x 490 mm Pos. 2 Masonry panel formwork 550 x 990 mm Number of wall panels : 16 pieces 550 x 990 mm Pos. 3 Masonry panel formwork 800 x 990 mm Number of wall panels : 16 pieces 800 x 990 mm Pos. 4 Masonry panel formwork 1050 x 990 mm Number of wall panels : 16 pieces 1050 x 990 mm Pos. 5 Masonry panel formwork 1300 / 1550 x 990 mm Number of wall panels : 8 pieces 1300 x 990 mm 8 pieces 1550 x 990 mm Pos. 6 Masonry panel formwork 1050 / 1300 x 490 mm Number of wall panels : 8 pieces 1050 x 490 mm 8 pieces 1300 x 490 mm Pos. 7 Masonry formwork 18000 / 1300 x 4 ...

Block glue press Müro 5000/A3 WT; cleaned and tested; Floor-standing unit; 2x dryer; Insertion width 525mm; Max. Insertion height 525mm. Block guing machine Müro 5000/A3 WT; cleaned and checked; floor mounted machine; 2x dryer; max.width 525mm; max.height 525mm.

Hydraulic control block for hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Hoerbiger, hydraulic control block from press brake HACO PPES 30135 -Type: HB92190-002B -Individual components: see photos -Quantity: 2x control block available -Price per piece -Dimensions: 455/270/H90 mm -Total weight: 10 kg

Key data: 1558 KW, 2300 kVA, 400 V

Engine Make: MWM Engine type: TCG 2020 V16 Power: 1558 kW RPM: 1500 Fuel: Natural gas Hz: 50 Year of manufacture: 2007 Operating hours: 57,000 h Scope of delivery: Motor+generator on base frame, motor control TEM, throttle line, pumps.

Hydraulic control block for hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: HACO, hydraulic control block from press brake type PPES 30135 -Control valve: hy hydraulic ring WLL43G06P012KB4 / WEF42A06C1 -Lifting magnet: Magnet-Schulz G RF Y 045 F20 E11 -Individual components: Type/number see photos -Dimensions: 540/380/H400 mm -Total weight: 23 kg

Used concrete block mould for the production of 2 concrete steps each with nominal lengths of 90cm, 100cm, 110cm and 120cm. The mould includes fitting parts and corresponding printing plates, which are built into the mould according to the step length to be produced. Step height 18cm. Step tread approx. 27cm. The mould was used on a concrete block machine type Schlosser SV40.

used concrete block mould for the production of 30 paving stones 8cm

Used concrete block mould for the production of drywall blocks (tongue and groove system) The mould was used on a concrete block machine type Schlosser SV40.

SECOND-HAND CARROUSEL FOR CORNER BLOCKS WITH 4 WORKING STATIONS

Connection block, connection plate FESTO PRS-1/4-2-B 15861 valve positions: max. 2 connection Control exhaust air: 2x G1/8 ( inches ) Pneumatic connection: 3x G1/2 ( inch ) Material: Aluminum ( connection plate ) New ! Dimensions 132 x 42 x 53 mm

Key data: 130 , 200

MAN gas generator enclosed in sound proof chamber, in good condition. It has the following specifications: Manufacturer: MAN Fuel: Gas Manufacture year: 2010 Kva: 200 Power: 130 kW Other specs: Turbo included. Control panel included.

Ramatik 1200 egglayer, fully automatic, Siemens Simatic PLC, very good condition, including packaging device , year of construction 2004 as well as 10 moulds consisting of: - hollow block 38 x 22 x 25 cm, 2 moulds - hollow block 38 x 22 x 30 cm - ceiling block - intermediate wall block 50 x 20 x 8 cm - column 25 x 25 x 25 cm - shuttering block 15 - shuttering block 20 - shuttering block 25 - shuttering block 30

Recon Part Number: 100-8026 #49Y00760 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Doosan gas generator in good condition. It has the following specifications: Manufacturer: Doosan Fuel: Gas Manufacture year: 2008 Kva: 600 Mass: 3740 Other specs: 10 cylinder, electric panel, complete.