elevating table used for sale

Table,stainless steel,with sink,L 3000 x W 650 x H 890 mm.

Table,stainless steel,with shelf,L 1550 x W 600 x H 900 mm.

Table,stainless steel,standing on legs,L 1340 x W 750 x H 570 mm.

Table,stainless steel,standing on legs with wheels,L 1100 x W 800 x H 800 mm.

Table,stainless steel,with 2 sinks,L 3800 x W 630 x H 930 mm.

Table,stainless steel,for wall mounting,with sink,L 2150 x W 700 mm.

Table,stainless steel,for mounting on wall,with sink,L 2000 x W 700 mm.

Table,stainless steel,for mounting on wall,with sink,L 1900 x W 700 mm.

Table,Stainless steel on wheels with grid-top,L 1000 x W 750 x H 740 mm.

Table,stainless steel,standing on legs with wheels,L 850 x W 550 x H 750 mm.

Lifting table,Hymo,hydraulic lift,table lift 830 mm.

Lifting table,Hymo,hydraulic lift,table lift 830 mm.

Separating table,stainless steel. standing on 4 legs,roller conveyor in the bottom,L 990 x W 570 mm

Circular table,Soco,galvanized,with plastic plate,Ø 1200 mm.

Circular table,stainless steel,standing on legs,Ø 1000 mm.

Feeding table,with mechanical arm for feeding,L 1800 x W 900 x H 900 mm.

Table,stainless steel,with wheels,L 1885 x W 885 x H 900 mm.

Table top,stainless steel,with suction grid,L 1200 x W 800 mm.

Tabletop,stainless steel,with sink,L 1680 x W 800 mm.

Hose fluid bed table,stainless steel,with heat and blower,L 3750 x W 620 mm.

workpiece diameter: 600 mm workpiece weight: 400 kg workpiece height: 300 mm total power requirement: 35 kW weight of the machine ca.: 4500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 700 mm table width: 400 mm table load: t total power requirement: kW weight of the machine ca.: 250 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rotary table diameter: 1000 mm grinding height: 500 mm grinding head - power requirement: 15/5,5 kW total power requirement: 30 kW weight of the machine ca.: 18 t dimensions of the machine ca.: m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _______________________________________________________ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx.  ...

table length: 590 mm table width: 590 mm table load: 200 Kg table turning speeds: 0,23 - 2,3 U/min table height: 650 mm total power requirement: 0,55 kW weight of the machine ca.: 600 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 960 mm table load: 3,5 t swivelling range: 0 - 110° deg. table rotating: 360° deg. table turning speeds: 0,1 - 0,9 U/min height adjustment: 1070 - 1800 mm table drive: 1,5 kW hydraulic motor: 1,5 kW total power requirement: kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,35 x 1,35 x 1,80 m Hydraulic Welding Positioner - Adjustable rotating speed - Remote controller with 5 meter cable length - Digital speed indicator on the controller panel for monitoring rotation - Mechanical angle indicator (for tilting) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 1600 mm z-travel: 1250 mm Control: Heidenhain type: TNC 426 table surface area: 2000x1600 mm Table load: 12500 kg Rotary table: 360 ° spindle turning speed range: 12-3000 U/min Feed: 1-9999 mm/min Rapid movement: 10000 mm/min total power requirement: 80 KVA weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 800 mm table load: 0,6 t table height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Circular Indexing Table dia 800 mm, motorized rotating, swivable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 500 mm table load: x t table height: x mm spindle diameter: 0 mm x-travel: 500 mm y-travel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number: 33 Positionen weight: 52 kg condition: neu : 28 mm P-Set 1:27 pieces, 28mm system (15mm), consisting of: Clamps: 5 Sk. 100 / 350mm Stop: 2 pieces 500mm Stop: 2 pieces 150mm Angle: 2 pieces 175 x 175mm Flat angles: 2 pieces. 350 x 250mm Flat angles: 2 pieces 275 x 150mm Eccentric discs 2 pcs. 100mm Quick release bolts: 10 pcs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1000 mm table width: 1000 mm table load: 1,5 t flange diameter: 700 mm turning speed: max. 0,04 U/min weight of the machine ca.: 1,2 t dimensions of machine L x W x H: 1,60 x 2,0 x 1,50 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 90 mm x-travel: 1000 mm y-travel: 1200 mm z-travel: 1200 mm feed movement: 710 mm spindle taper ISO: 40 turning speed range: 8 - 1600 U/min table-size: 1120 x 1000 mm table rotating: 360 ° table load: 2,5 t total power requirement: 11 kW weight of the machine ca.: 10 t dimensions of the machine ca.: 4,5 x 3,3 x 3 m separate switchboard, rapid feed, some tool holders, without face plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 90 mm x-travel: 900 mm y-travel: 900 mm z-axis: 1200 mm w-axis: 800 mm table surface area: 900 x 1200 mm rotation movement: 360 Grad table load: 6,0 t turning speeds: 25 - 1400 U/min spindle taper ISO: 40 voltage: 380 V / 50 Hz drive milling spindle: 9,2 kW total power requirement: 35 KVA weight of the machine ca.: 10 t dimensions of the machine ca.: 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360, • radial face slide Ø 600 mm. traverse distance: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 450 mm table load: waagerecht 300 Kg table load: senkrecht 150 Kg table turning speeds: 0,2- 2 U/min voltage: 230 V / 50 Hz total power requirement: 0,55 kW weight of the machine ca.: 80 KG dimensions of the machine ca.: 0,65 x 0,5 x 1,0 m • unused stock machine • manual tilt adjustment • Start-Stop by foot switch • with CE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 3000 mm y-travel: 1500 mm control: Heidenhain TNC 355 taper ISO: 50 w-axis: 600 mm Table dimensions: 1200 x 1500 mm table load: 5 t spindle turning speed range: 12 - 2300 U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 120 mm x-travel: 1800 mm y-travel: 1300 mm z-travel: 1500 mm taper ISO: 50 Table dimensions: 1120x1400 mm number of spindle speeds: 0-1.000 total power requirement: 13,2 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: . mm x-travel: . mm y-travel: . mm table length: 2000 mm table width: 2000 mm table load: 25 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 100 mm x-travel: 1600 mm y-travel: 1120 mm z-travel: 1250 mm Table dimensions: 1250 x 1250 mm tool adaptor: MT 6 spindle turning speed range: 7,1 - 1120 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Outriggers Facing head D.R.O. Acurite ISO 50 adapter Spindle support The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ROLLER TABLE BLASTING SYSTEM MANUFACTURER: WHEELABRATOR BERGER TYPE: CRC 400X300 Blasting machining of profiles and sheets Manufacturer: Wheelabrator Berger Type: CRC 400x300 Throughput width: 400mm Throughput height: 300mm Centrifugal wheel: 4 pieces x 4 kW frequency controlled Inlet roller conveyor: approx. 6,000mm Discharge roller coaster: approx. 6,000mm Incl. blow-off station, control cabinet, etc. TOP CONDITION ROLLER BLAST MACHINE BRAND : WHEELABRATOR BERGER TYPE: CRC 400X300 Blasting processing of profiles and sheets. Brand: Wheelabrator Berger Type: CRC 400x300 Inlet Width: 400mm Inlet High: 300mm Wheels: 4 x 4,0kW with Drivers Inlet roll table: ca.6.000mm Outlet roll table: approx. 6.000mm Blowstation: YES Incld. Main Panel., Very good condition! Price: Loading on truck .-€ Price: Loading on Truck .-€ Warranty: 6 months f ...

sheet width: 1350 mm plate thickness: 5 mm cutting angle: 2,3 ° table width: 530 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 1100 kg dimensions of the machine ca.: 1,93 x 2,2 x 1,28 m Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2050 mm plate thickness: 3 mm cutting angle: 1,5 ° table width: 510 mm table height: 820 mm back stop - adjustable: 600 mm no. of strokes: 35 Hub/min total power requirement: 3 kW weight of the machine ca.: 1900 kg dimensions of the machine ca.: 2,64 x 2,06 x 1,21 m Basic equipment: - manual backgauge with 600 mm travel - Measuring stop 800 mm - Foot pedal with emergency stop switch - Bracket arms in front for workpieces - Cutting line lighting - Protective demarcation OPTIONS: - Pneumatic sheet metal lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° - engine. Backgauge with NC control and 750 mm travel - engine. Backgauge with NC control and 1000 mm travel - piece counter More sizes at info @ rs-sperling .de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tabletpresse,Diaf type TMA special,1 hoved,manuel.

Tabletpresse,Manesty type BB3B med 27 stationer,variabel hastighed.

Tabletpresse,Manesty type BB3A,rundløber med 39 stationer,max.130.000 tabl./time.

Tabletafstøver,rustfrit stål,type EB.

Tabletmaskine,Kilian type RU-ZS

sheet width: 1550 mm plate thickness: 6 mm cutting angle: 2,5 ° table width: 510 mm table height: 830 mm back stop - adjustable: 750 mm no. of strokes: 29 Hub/min total power requirement: 7,5 kW weight of the machine ca.: 2,5 kg dimensions of the machine ca.: 2,1 x 1,2 x 1,28 mm Basic equipment: - Engine. Behind stop with NC control and 750 mm adjustment - 1000 mm long measuring stop with T-slot and stopper - Foot pedal with emergency stop switch - Arm in front for material - Cutting line lighting - Hand and foot protection front and rear - piece counter Options: - Pneumatic lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° All other sizes can be found on the RS-Sperling Website. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tabletpresse,Diaf type TM special,1 hoved.

Tabletpresse,Comprex II,1 hoved

Tabletafstøver,Korsch type Quadromat,med børster

Tabletafstøver,Korsch type Quadromat,med børster