elba l 250 used for sale

Key data: 315 mm, 630 mm, 10 U/min

Turning diameter over bed 630 mm, center width 3000 mm Speed range 10 - 1250 rpm Feed range longitudinal 0.06 - 1.4 mm/rev, transverse 0.024 - 0.518 mm/rev Spindle passage 65 mm Main drive 15 kW Incl. fixed bezel D approx. 390 mm Rapid traverse 3-B lining,

Manufacturer : Sidel Model: 99000863608   Power supply: 220 V Cutting capacity: ? 60 - 160 mm Maximum length 400 mm Maximum number of simultaneous cuts: 4

Manufacturer : Cotuplas Model: S4 Type : Manual sealer for plastic tubes Applications Production of samples for demonstration Market research Production of tubes for small or medium production runs Laboratory testing, internal product compatibility Features S4 unit accepts tubes from 13.5 mm to 60 mm in diameter and up to 230 mm in length Manual production speed of up to 240 tubes per hour Adjustable timer from 0 to 30 seconds to meet sealing requirements The tube is positioned between the sealing jaws by the operator Tube positioning device ensures process repeatability and seal quality (missing parts, planned installation) 3.5 mm high jaws maintain pressure while sealing Spring-loaded jaws open effortlessly with a lever Consumption water : 100 L / h electrical : 400 W

Manufacturer: VWR VWR Model: INCU-Line 68R Type : Refrigerated incubators Temperature stability (time) (?C) ?0.1 at 37 ?C Temperature uniformity (?C) ?0.3 at 37 ?C Capacity 68 L Temperature range +3...70 ?C Type of convection: Forced convection Maximum chamber capacity 20 kg W?D?H int. 470?300?430 mm W?D?H ext. 570?680?600 mm Power rating (W) 250 Weight 41 kg Maximum load per shelf (kg) 10

Description: Rubber pads conveyor belt renewed approx. 2022 Annual maintenance by HOMAG incl. various new parts (see photos) Second glue pot (serviced annually) Single-sided machine for joint trimming of straight workpiece edges, gluing and finishing of various edge materials from the roll or as strips, up to 20 m edge thickness, with longitudinal and transverse throughfeed. Fixed stop side on the left. BRIEF DESCRIPTION OF THE BASIC EQUIPMENT: BASIC MACHINE WORKPIECE TRANSFER DEVICE - TOP PRESSURE CONTROL power control PC22 FREE SPACE Joining unit GLUING PART A20 BASIC for rolls up to 3 mm and strips up to 20 mm NOISE PROTECTION CAPPAGGREGATE FREE SPACE for further processing units BASIC MACHINE: Continuous machine stand for setting up the processing units Workpiece support with extendable roller rail approx. 800 m Glue roller drive for feed stop Glue container lift ...

Description: control: SIEMENS Simatic HMI Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

APV Liquiverter TB-250-01. yom.1993, excellent condition. Batchcapacity 250 litres. with double wall for heating or cooling during mixing. The Flex-Mix™ Liquiverter is specially designed for products with low to medium viscosity in order to obtain a fast mixing of powders and particles with liquids. The Flex-Mix™ Liquiverter is usable for mixing, dispersion, recombination and reestablishment of soluble products. It is also used for reconstitution of dairy products, manufacturing of fine foods, emulsions, preparation of starch and hydrocolloid solutions

Linear weigher with 100g up to 10,000g weighing range. Weighing/dosing of granular and chunky products. 2 weighing heads with load cells and 2 vibrating feeders allow fast and precision weighing. - Specifications: capacity weighing hopper: 20 L | number of weighing heads: 2 | weighing range: 100-10,000g | accuracy: +/- 1-25g | max. speed of the machine in neutral: 20 cycles/minute | power: 220V, 1-phase | stainless steel version SUS 304. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo a ...

Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) is perfect solution for longitudinal cutting of coil metal into strips. This line can work with very big coils up to 74,000 Lb weight and 0.25 inches maximum metal thickness. Line is strong enough to make cutting speed 200 – 600 fpm depends on metal thickness and width you work with Slitting line Pro-Eco 72″ x .250″ x 74,000Lb (A3774) Manufacturer: PRO ECO Material: CRS, HRS, HPP & O Material Width: 12″ – 72″ Material Thickness: .060″ – .250″ Coil Weight: 74,000Lb Coil ID: 20″ – 30″ / 20″ – 24″ Coil OD: 72″ Line Speed: 200 – 600 fpm Direction: L-R Three (3) Coil Storage Ramp Coil Car Powered Lift & Traverse Double Cone Uncoiler Sliding Base Dual Water Cooled Brake Feed-Up Motor Powered  ...

Band width: 150mm; Table size: approx. 2500mm x 800mm; Suction port: 140mm; Motor power: 3kW; Machine length: approx. 3400mm; Machine width: 1200mm; Weight: 400kg; Robust design also allows the machining of longer workpieces grinding unit swivels, thus can also be used as an edge grinding machine 225 mm large balanced belt rollers ensure low-vibration drive. Easy adjustment of the abrasive belt High belt speed of 17 m/s right-counterclockwise rotation Upper sanding sole with graphite coating 4-ply sprung sanding pad With movable sanding pad for oblique surfaces Smooth-running grinding table even under high loads due to heavy workpieces Optimal price-performance ratio

Parallel Lathe MULLER & PESANT Between points: 2500 mm Maxi Ø on bench: 520 mm Maxi Ø over saddle: 280 mm Maxi diameter in brocken bed: 700 mm Spindle diameter: Ø 56 mm Spindle speed: from 12,5 to 1000 RPM TRIPAN Turret 3-jaws chuck Ø 250 mm Tailstock CM4 Auto feeds longitudinal + transversal Lubricant pump Voltage: 380 V Dimensions (L x W x H): 4000 x 1500 x 1600 mm Weight: approx 3,5 T

Lock valve vacuum pump E250 Status: Generalueberholt Gewaehrleistung: 12 months Manufacturer: Leybold Type: E250 Engine rated power: 5.5KW nominal suction digesters: 290m3/h Final pressure without gasb.: 4x10e-2 Zubehoer: Operating instructions with spare parts list Delivery: short-term

Universal parallel lathe Useful length: 2000mm Turning radius: 260mm Ø 60 mm bar pitch, 16 speeds from 18 to 1.600 rpm. With protections ATTENTION! POSSIBLE MACHINE CONNECTED TO 220V THREE-PHASE. VERIFY!

used, almost new Leica Sprinter 250M digital leveller with accessories see photos, stowed in the hard case 1.2x0.6x0.42 m with wheels.

Laboratory Chamber Furnace with controller, T.max °C: 1200, 3.7kW, Inside dimension in mm (wxdxh) 250 x 400 x 250 equals 25.0 liters.

Control cabinet with control panel for Lompas DN 250 pallet nailing machine; Control original GE FANUC Series 90-30 controller; keypad for machine operators; Ready for use until dismantling, dismantling, ready for loading Freight forwarding

turning diameter over bed:530 mm turning diameter over slide rest:320 mm turning length:2000 mm center height over bed:275 mm speeds:18 - 1600 U/min spindle bore:60 mm bed width:430 mm engine output:17 kW weight:2700 kg spindle taper:7 dimensions of the machine ca.:5,5 x 1,40 x 1,75 m - 3-chaw chuck Röhm D = 350 mm - tool holder system - approx. 10 pcs. tool holder - workpiece wheigt between centers 500 kg - many accessories in 2 pcs. tool cabinets

Technische Daten: - Arbeitsbreite der unteren Leimwalze 450 mm - Arbeitsbreite der oberen Leimwalze: 250 mm - Arbeitsbreite der oberen Druckwalze: 150 mm - Durchmesser der Walzen: 2 x 140 mm - Auftragwalzen und Dosierbehälter bestehen aus dem Nirosta Material - Auftragsmenge: 150 - 200 g/m2 - Gummihart: 70 Shor - Geschwindigkeit: 20 m/min - Leistung: 2 x 0,25 kW - Steuerspannung: 24 V - Schutzklappe - mittels Hebels und Excenter wird die Leimauftragsmenge geregelt - der Leimbehälter und die Auftragwalze werden zum Reinigungszweke einfach aus der   Leimauftragmaschine herausgenommen - auf der Eingangseite sind zwei Rollen mit Durchmesser 50 mm - auf der Ausgangseite sind zwei Axen mit Scheibenrollen (nicht angetrieben) - die Leimauftragmaschine ist sehr Stabil - CE Konformität - Gewicht 300 kg Option: - Geschwindigkeitsregulierung 5 - 50 m/min

SACMI line for crown corks.

Mercury vapor lights to illuminate large halls Manufacturer: May Type: HQ 10/250 Technical data: Power: 250 Watts Voltage: 230 Volt Frequency: 50 Hz Lamps are waste. Therefore, these are inexpensive to make. They are fully functional and in very good condition!

Accessories available Tip height 300 mm Top width 2000 mm Spindle speeds 16-1120 RPM Dimensions L/W/H 3750/1100/1400 mm Weight approx. 2500 kg

Accessories available. Peak height 125 mm Tip width 500 mm Circulation diameter over bed 250 mm Circulation diameter via flat slide 140 mm Spindle head size 4 Inner cone similarly shortened MK 5 Spindle bore 38 mm Speed 3000 rpm. Bed slide path 450 mm Plan slide path 120 mm Upper slide path 82 mm Inner cone Reitstockpinole DIN 228 MK 3 Pinole stroke 80 mm Feed diameter 125 mm Collet passage max. 28 mm Flat slide diameter max. 200 mm Guide diameter fixed set stick 10 - 60 mm guide diameter. Seedstick 10 - 50 mm Workpiece weight incl. clamping equipment max 40 kg Space requirement L x W x H approx. 1300 x 700 x 1400 mm Weight approx. 650 kg

Used lining machine PMC 250. Profile 916. Produced in SACMI Italy. Perfect working condition.

Laser cutting machine MAZAK Year of manufacture: 1999 Laser power 1,5 KW CNC MAZATROL Working range: 2500 x 1250 x 100 mm Max sheet dimensions: 2500 x 1250 x 12 mm Cooling system Extraction system Transformer Pneumatic sheet metal clamp Ball support for easier positioning of the plate Technical documentation available

Aseptic sterilizator Volume: 100 l

1 BENZ laboratory jigger type LJ 250 TM, roller width 230 mm

Metal Lathe make COLCHESTER Type Master 2500 / 165x1000Fabr. -No: MCH No 5/0009/07505, year of construction 1979Tip width: 1000 mmTop height: 165 mmTurning diameter over bed: 335 mmTurning diameter over cross slide: 210 mmSpindle bore: 40 mm16 spindle speeds: 30 - 2500 rpm.39 metric thread pitches: 0.2 - 14 mm45 Whiteworth thread pitches: 2 - 72 tip18 module thread pitches: 0.3 - 3.521 diametrical pitch thread pitches: 0 - 44 DPLongitudinal feeds: 0.03 - 1.0 mmFeed rates: 0.015 - 0.5 mmDrive power: 3.7 kWExternal dimensions: 1985 x 890 x 1195 mmWeight approx: 890 kgWith- 3- jaw chuck diameter 200 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWA ...

Metal Lathe Make COLCHESTER Type Master 2500Fabr. -No: MCH No 5/0007/05812, built in 1977Tip width: 635 mmTop height: 165 mmTurning diameter over bed: 335 mmTurning diameter over cross slide: 210 mmSpindle hole: 40 mm16 spindle speeds: 30 - 2500 rpm.39 metric pitches: 0.2 - 14 mm45 Whiteworth thread pitches: 2 - 72 tip18 module thread pitches: 0.3 - 3.521 diametral pitch thread pitches: 0 - 44 DPLongitudinal feeds: 0.03 - 1.0 mmFlat feeds: 0.015 - 0.5 mmDrive power: 3.7 kWExternal dimensions: 1985 x 890 x 1195 mmWeight approx: 855 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Facing lathe make HEYLIGENSTAEDT type 405 EV 2500Masch. -No: 190472 built in 1967 with sliding upper bedTop height from the underbed: 740 mmTurning diameter in the lower bed: 1480 mmTop height in the upper bed: 420 mmTurning diameter in the upper bed: 840 mmBed length: 2500 mmTurning length in the upper bed: 2000 mmTurning length in pushed-back lower bed: 1500 mm18 spindle speeds: 9 - 450 rpm.Longitudinal feeds: 0.09 - 2.8 mm / revCross feeds: 0.045 - 1.4 mm / revSpindle bore: 86 mmDrive power: 14 kWDimensions approx: 4000 x 1500 x 2200 mmWeight approx: 6,0 tWith- sliding upper bed- faceplateused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Mach ...

TT MIDI 250ml, 330 ml, 500 ml TT BASE 500ml, 750 ml, 1000 ml. Running hours-31151. We operated by BASE from 2013.03…2018.11 Running hours-27145. We operated by MIDI from 2015.08…2018.11

turning diameter: 200 mm swing diameter: 250 mm turning height: 350 mm control: Siemens Sinumerik 840 D spindle diameter in front bearing: 100 mm feed range: 0,1 - 20000 mm/min rapid traverse: 20 m/min stroke of vertical slide: 300 mm spindle head DIN 55026 - Size: A 6 : 50 - 6500 1/min Speed range drive tool: 0 - 3000 1/min total power requirement: 40 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 4,5 x 4,0 x 3,5 m equipped with: - CNC Control Siemens 840 D - Tool turret for 12 tools VDI 40 - driven tools on station 1/4/7/10 - conveyor belt - no coolant system (machines was added to a centrelized coolant system) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mm swing diameter: 250 mm turning height: 350 mm control: Siemens Sinumerik 840 C spindle diameter in front bearing: 100 mm feed range: 0,1 - 20000 mm/min rapid traverse: 20 m/min stroke of vertical slide: 300 mm spindle head DIN 55026 - Size: A 6 : 50 - 6500 1/min Speed range drive tool: 0 - 3000 1/min total power requirement: 40 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 4,5 x 4,0 x 3,5 m equipped with: - CNC Control Siemens 840 D - Tool turret for 12 tools VDI 40 - driven tools on station 1/4/7/10 - conveyor belt - no coolant system (machines was added to a centrelized coolant system) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mm turning height: 1500 mm turning diameter over bed: 2700 mm turning speeds: 1,9 - 60 (16x) U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 700 mm turning speeds: 115 - 1620 U/min centre height: 125 mm spindle bore: 27 mm tailstock quill taper MT: 2 tailstock quill stroke: 40 mm metric threading: 0,2 - 3,5 mm thread - inch: 8 - 56 inch. thread - module: 0,2 - 12,5 mm swival range +/-: Oberschlitten 45 ° connected load frequency: 400 V total power requirement: 0,75 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for ...

turning diameter over bed: 250 mm turning diameter over slide rest: 130 mm turning length: 700 mm turning speeds: 115 - 1620 U/min centre height: 125 mm spindle bore: 27 mm tailstock quill taper MT: 2 tailstock quill stroke: 40 mm metric threading: 0,2 - 3,5 mm thread - inch: 8 - 56 inch. thread - module: 0,2 - 12,5 mm swival range +/-: Oberschlitten 45 ° connected load frequency: 400 V total power requirement: 0,75 kW weight of the machine ca.: 0,15 t dimensions of the machine ca.: 1,41 x 0,61 x 0,41 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for ...

turning diameter over bed: 250 mm turning diameter over slide rest: 140 mm turning length: 550 mm turning speeds: 125 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK tailstock quill stroke: 65 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 1,25 x 0,6 x 0,6 m Equipped with - 2-axis digital measuring system with position indicator - manufactured according to DIN 8606 - 27 mm spindle passage - adjustable guideways by adjustable strips - Strong engine with 0.75 kW - High resolution of the axis spindles for exact positioning Delivery: 3-jaw chuck 100 mm, change gear set, splash guard 3-axis digital measuring system fully assembled. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rolling mill with 8 cylinders, double passage

Universal small lathe manufactured by UNGARN, type EMU - 250Fabr. -No: 3104, year of construction 1973Technical specifications:Center distance: 600 mmTop height: 130 mmTurning diameter over bed: 260 mmSpindle bore: 28 mmStepless speeds: 52 - 2250 rpm.Drive power: 1.62 kWExternal dimensions: 1785 x 600 x 1200 mmWeight: 770 kgWith- Three-jaw chuck 140 mm- Quadruple steel holder- tailstock- Drill chuckusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

control: Siemens 840-D tool taper: HSK & VDI 40 - - -: - - - - - - Vertical Turning Machine | EMAG - VTC 250 DUO ED with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets, - 6-station end-processing turret with HSK tool holder, - 12-station disc turret for driven tools and VDI 40 tool holder, - 12-position disc revolver with cross slot and VDI 40 tool holder, - NC - clamping head, - NC bezel, self-centering, - EMAG hydraulic double-piston clamping cylinder, - tailstock down, - Hydraulic double-piston clamping cylinder at the top, - chip conveyor, - Knoll plant 1.500 l, - Coolant supply 7-30 bar, - OP20: shaft chuck with retractable jaws and face drivers, - Tool holder with Capto 5, - Artis quick-change system for tool and process monitoring, - Tool pack is included, The machine is in a well-maintained condition and can be inspected at any time  ...

control: Siemens 840-D tool taper: HSK & VDI 40 - - -: - - - - - - Vertical Turning Machine EMAG - VTC 250 DUO DD with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets - 12-position disc turret for driven tools and VDI 40 tool holders, - 12-station disc turret with cross-slot and VDI 40 tool holders, - 12-station disc turret for driven tools and VDI 40 tool holders, - NC steady rest, self-centering, - headstock below, - tailstock below, - chip conveyor - Knoll unit 1.500 l, - OP10: Three-jaw chuck Rhöm KFD-N 220/3, - OP20: Hainbuch Spanntop pull-back BZI65, - Live tool for axial and radial machining, - Tool holder with Capto 5 quick change system, - Artis as tool and process monitoring, The machine is in a well-maintained condition and can be inspected at any time under power. A machine video from the production plant will be shared on reques ...

Technical data PaperSpike 2 G: Manufacturer Grumbach und Petermann GmbH Type 2500 Year of construction 2019 Dimensions accelerator belt 3,000 x 2,980 x 600 mm (l x w x h) Weight 1,100 kg Dimensions PaperSpike sorting unit 2,480 x 2,982 x 1,805 mm (l x w x h) Weight 3,100 kg Dimensions PaperSpike 2G complete 5,450 x 3,480 x 1,805 mm (l x w x h) Weight 4,600 kg Dimensions paper discharge conveyor 3,400 x 1,200 x 650 mm (l x w x h) Weight 400 kg Electrical equipment of the entire system: Voltage 380 - 420 V Connected load 9.5 kW Current consumption 20.34 A Operating principle: The material is fed in as dry and thin a layer as possible, preferably a monolayer, evenly over the entire width on the accelerator belt. The sorting roller with the spikes pulls the mixed paper from the chute, while cardboard boxes are impaled and held by the spikes. Material (paper) with low stiffness (newspapers, m ...

Welding fume extraction, soldering extraction, laboratory extraction High vacuum Torch extraction FUMATOR-APPARATEBAU HEINZ WAGNER Type Minivac 250 D series. No. 2902619 Year of construction 2004 Unit air volume flow max. 250 m3/h Minimum air volume flow rate min. 100 m3/h Separation efficiency 99.97 % Welding fume class W3 Motor power approx. 0.75 kW Mains connection 230 volts, 50 Hz - Suction power infinitely adjustable - 2 pieces Suction connections 45 mm - mechanical air filter (used) - mobile underframe with 4 fixed castors, platform roller Space requirement L x W x H 700 x 500 x 600 mm Weight suction 35 kg Weight platform roller 7 kg good condition; used

Dorries Model SD250 Vertical Boring Mill/ Turret Lathe Year: 1978 Flush Floor Diameter of 4-jaw chuck: 98.5"/ 2501 MM Maximum swing, side head down: 110"/ 2794 MM Height under rail: 85"/ 2159 MM Table Load Capacity: 110,000 Lbs Cross travel of ram head: 61" Vertical travel of ram head: 42" Maximum Capacity Under Tool: 70" Side head: none Table speeds: 112 RPM Variable Main drive motor: 75 HP Current Electrical Arrangement: 480/3/60 ¯ Complete With: 98" 4 Jaw Chuck (1) Swiveling Ram Head (1) 5 Position Swiveling Turret Head Full Pendant with digital readout Baldor Variable Drive Coolant Tank Flush Floor Threading Video Available

SECOND-HAND LINEAR COPYING SHAPER BACCI MOD. FC8 2500 - Unit 1-2: milling units - Unit 3-4 milling units - Unit 5-6: sanding units - Unit 7-8: sanding units - Working height mm. 180 - Max. working length mm. 2500 - 8 locking cylinders -Cabin - S/N 1481 - CE year 2000

Demag Traverse Total length: 5.5 meters Gauge: 5.0 Meter Stroke: 250 KG

L + Z lathe WEWAG model 250 / 1500 Factory no. 20953 Year of construction approx. 1975 Distance between centers 1500 mm Nominal turning diameter over bed 500 mm Turning diameter over bed max. 510 mm center height above bed 255 mm turning diameter over support 300 mm center height above support 150 mm spindle bore 56 mm spindle speed 18 - 1800 rpm. 24 steps lathe chuck holder short cone DIN 55022 Tailstock inner cone MK 5 Drive power 4 kW and 6.7 kW pole switchable - 3-jaw chuck BISON, 250 mm with one set Hard step jaws steel holder 4-fold for turning - fixed Lynette - Control cabinet fixed to the back of the machine weight 2500 kg; used

turning diameter over bed: 250 mm turning diameter over slide rest: 145 mm turning length: 550 mm turning speeds: 50 - 2000 U/min centre height: 125 mm spindle bore: 26 mm tailstock quill taper MT: 2 MK connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 0,12 t dimensions of the machine ca.: 1,3 x 0,65 x 0,6 m 3-axis LCD digital display system longitudinal feed. 3-jaw chuck 125 mm. 4-way steel holder. chip tray, bulkhead Hardened bed tracks. Emergency stop switch. lining protection Tool box, instruction manual. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Haul-off, used and refurbished Manufacturer: Battenfeld Type: P-250-SX-2000 Year of construction: 1988 Haul-off force: 30,000 N Pad width: 250 mm Effective contact length: 2000 mm Number of rubber pads: 200 pieces Haul-off speed: 0.16 - 4.0 m/min. Drive motor: 4.2 kW Extrusion height: 1000 – 1200 mm Caterpillar clamping: pneumatic Profile cross-section: max. approx. 300 x 100 mm Power: 10 kW Dimensions: 3400 x 1300 x 2300 mm (LxWxH) Weight: approx. 2300 kg Condition: The haul-off has recently been completely overhauled.

L + Z Lathe COLCHESTER Type Master 2500 Masch. No. 5/0007/03953 Year of construction approx. 1985 Distance between centers 635 mm Center height above bed 165 mm Center height above support 105 mm Spindle bore 42 mm Spindle speed 30 - 2500 rpm. 16 steps Feed longitudinal and plan Tailstock inner cone MK 3 Chuck flange Camlock D1 4? Drive power 3.7 kW Mains connection 380 V 50 Hz - 3-jaw wedge bar chuck RÖHM, type Duro 200 mm- 3 pieces quick-change steel holder PARAT with - 1 piece rotating centering jib - 1 piece drill chuck ALBRECHT 1 to 13 mm with MK 3 holder - 6 pieces machine feet- Coolant device in the machine base - Splash guard on the back of the machine- Machine light Space requirement L x W x H 1700 x 880 x 1200 mm Weight approx. 850 kg good condition; used

Manufacturer: WMW Type: DLZ 630x2500 E IV Stock number: 0979 Year of construction: 1965 Turning length: 2500 mm Orbit diameter over bed: 630 mm Speed: 1455 rpm Voltage: 380 V Motor power: 10 kW Dimensions (LxWxH): 4800 x 1900 x 1750 mm Machine weight: 4.85 t