eisele pressta used for sale

Eisele cold circular saw LMS 2 380 V 16 A 1700 - 3400 rpm 1 clamping jaw without locking

Eisele LMS 1 Speed 4000 rpm 380 V 16 A Untested without plug Swivel table Vice

Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...

Metal circular saw 400 V 400-450 mm saw blade D max 150 mm Square 140 mm Flat 275x70 mm Speeds 6, 12, 24, 48 rpm Cycle Supplies

Hydropneumatic mode of operation Max. punching height: 90 mm Resister stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg

Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.

Made in Germany Saw blade size: 300 mm Saw blade speeds: 40/80 rpm. Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.

Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 120 x 85 mm Mitre cutting area at 45° round: 85 x 85 mm Saw blade speed: 40/80 rpm Cutting speed: Drive motor: 380 V, 1.0/1.2 kW Space requirements: 850 x 520 x 1500 mm Weight: approx. 200 kg

Saw blade Ø: 275 mm Cutting range at 90° round: 90 mm Cutting area at 90° rectangle: 75 x 75 mm Mitre cutting area at 45° rectangle: 75 x 75 mm Saw blade speed: 40/80 rpm Drive motor: 380 V, 0.5/0.9 kW Space requirements: 700 x 600 x 1580 mm Weight: approx. 180 kg

Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. pawl width: 300 mm Max. notch height: 185 mm Max. jack depth: 185 mm Material stop can be swivelled with locking points and digital display Notch height motorized adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Coolant lubrication

Cutter diameter: 250 mm Max. notch width: 250 mm Max. notching depth: 85 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic workpiece clamps Minimum quantity spraying device Manual feed Weight: approx. 150 kg

Commission trolleys, rack trolleys, paint drying trolleys, specialist transport trolleys, transport trolleys, window profile trolleys, -Number: 1 commission trolley available -Total length: 1750 mm -Total depth: 1020 mm -Total height: 1670 mm -Support bottom: 720 mm -Support height: 1400 mm -Weight: 62 kg

Miter saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 400 mm -Saw blade: swiveling -Drive: 2.5 kW -Speed: 2800 rpm -pneumatic material tension -pneumatic feed -with: chip extraction -Dimensions: 1100/900/H1160 mm -Weight: 238 kg

saw blade diameter: 450 mm cutting diameter: 150 mm capacity 90 degrees: flat: 400 x 30 mm capacity 90 degrees: flat: 345 x 70 mm capacity 90 degrees: square: 140 x 140 mm capacity 45 degrees: flat: 280 x 30 mm capacity 45 degrees: flat: 240 x 70 mm stroke: 240 mm saw blade turning speeds: 6 / 12 / 24 / 48 n/min work height max.: 1000 mm engine output: 3,0 / 3,6 kW weight of the machine ca.: 1150 kg range L-W-H: 1000 x 1330 x 1860 mm Furnishing: - electro-hydraulic semi-automatic cold circular saw - EISELE front control panel - robust and stable machine base - continuously adjustable feed speed of the saw blade - front guard / foldable - Drive via worm gear including EISELE rotation compensation” - comfortable miter adjustment in both directions via large turntable - suitable for the use of Ø 400/425/450 saw blades - hydraulic material tension - Pole changer motor for the gear stages  ...

This Eisele sound-dampened dirty water pump is a jack of all trades. , Whether it is sewage, slip, bentonite or sludge water or just surface water, this, Eisele BS 440 dirty water pump can do it all., , Max. flow: 80 m3/h, Max head: 15 MWK, Max. dirt passage: 20 mm, , If you are interested, please feel free to contact us, we will be happy to help you., , Throughput capacity: 80 m3/h, Max dirt passage: 20 mm, Motor brand: Hatz, Max. head: 15 MWK, Max dirt passag: 1800 rpm, Weight: 1150 kg, , = More information =, , Year of manufacture: 2017, Applicable material: Water, Empty weight: 1.150 kg, Connector size: 4, Technical condition: good, Visual appearance: good, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer a ...

Mitre Cold Circular Saw EISELE Type VMS 300 Masch. No. 4615 Type No. 4110 3M 0002 Year of construction 1995 Sawing range at 90 (round) 100 mm sawing range at 90 (flat) 120 x 80 mm sawing range at 45 (round) 90 mm sawing range at 45 (flat) 80 x 80 mm saw blade diameter 300 mm Saw blade speed 40 / 80 rpm. 2 stages mitre cut +45 to 90 to -30 motor power 1 and 1.2 kW mains connection 400 volts, 50 Hz - coolant device - mounted saw blade approx. 270 mm Space requirement L x W x H 700 x 700 x 1600 mm Weight 212 kg very good condition; used

This Eisele sound-dampened dirty water pump is a jack of all trades. , Whether it is sewage, slip, bentonite or sludge water or just surface water, this, Eisele BS 440 dirty water pump can do it all., , Max. flow: 80 m3/h, Max head: 15 MWK, Max. dirt passage: 20 mm, , If you are interested, please feel free to contact us, we will be happy to help you., , Throughput capacity: 80 m3/h, Max dirt passage: 20 mm, Motor brand: Hatz, Max. head: 15 MWK, Max dirt passag: 1800 rpm, Weight: 1150 kg, , = More information =, , Year of manufacture: 2016, Applicable material: Water, Empty weight: 1.000 kg, Connector size: 4, Technical condition: good, Visual appearance: good, , = Dealer information =, , Aroused your interest? . The sales team will be happy to answer any questions you may have. CALL or EMAIL us, we are here for you! We would like to be your supplier ! Also for spare parts, pipes, hoses  ...

Machine Type: NC Circular Saw Machine Manufacturer: Behringer Eisele Type: VA-2-NC-HM Year of construction: 2002 Condition: used / currently Hydraulics defective Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-BEH-1123 DESCRIPTION We offer you a used NC circular sawing machine from the manufacturer Behringer Eisele. Technical data will follow. - Roller conveyor feed and discharge side - Chip conveyors and chip trolleys - 12 saw blades / mostly new -Operating instructions Can be repaired if necessary. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and condition ...

Aluminium sawing machine with 2 saw motors that make a 45° cut independently of each other. Material feed unit with up to 8,100 mm Cross conveyor, depositing table, chip conveyor and suction Soundproof booth Control via Siemens S7 panel Instruction manual etc. available, further technical data on request The machine was in operation until it was dismantled Further technical data on request or see photos

Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise span: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed by actuating the foot switch Profile tension by means of infinitely swivelling vice.

Year: 2010 - technically efficient, ready to work - after full service - cooling installation - copy template - pneumatic clamping set

• Type: VMS 350 • Machine No.: 2934/2 • Sawing speeds: 17/34 m/min. • Mitre: up to 60° right • Stop: approx. 1000 mm • Power: 3x400V, 50Hz/5A • Dimensions (LxWxH): 700 x 700 x 1800 mm • Weight approx: 350 kg • Year of construction: 2001 • In operation since: 1.3.2002 • Accessories: stop approx. 1000 mm, saw blades and cooling water pump

Key data: 350 mm

Max. saw blade diameter: 350 mm Manual saw feed 2 sawing speeds Coolant lubrication

Key data: 440 mm, 120 mm

Specifications: Speeds 12.5 / 25 rpm Motor power 2.6 / 3.2 kW Hydraulic saw feed infinitely adjustable Saw blade size max. 440 mm Opening width vise approx. 250 mm Max. cutting height approx. 120 mm

saw blade diameter: 800 x 800 x 1500 mm cutting diameter: 200 mm stroke: 150 mm dimensions of the machine ca.: m total power requirement: 3 kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Underfloor aluminium circular sawing machine Specifications: - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting range - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand - Parallel stop

Year: 2013 - technically efficient, ready to work - after full service - two engines: 3 kW - cutting disc diameter: 2x Ø400 mm - maximum profile height: 250 mm - maximum dimensions of the 90° cutout: 135mm x 135mm - vertical disc manually adjustable in the range of 70° - 90° - 30° - material stop bar manually adjusted in the range of 30° - 90° - 30° - manual adjustment of the depth and height of the cutout

Profile height max. 160 mm Resistor stroke 100 mm Punching stroke 20 mm Pressing force 35 kN Compressed air connection 6-8 bar Weight approx. 350 kg

saw blade diameter: 400 mm cutting length: max. 4000 mm : 140 x 190 mm turning speeds: 2890 U/min engine output: je 2,2 kW connected load: 4,5 kW weight of the machine ca.: 0,75 t Dimensions (LxWxH): 5,0 x 1,0 x 1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Machine number 0746 , Table dimensions approx. 440 x 200 mm , saw blade diameter: 300 mm, weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,000 x 1,800 mm, turning speed range: 2000 / 4000 rpm

Description: Saw blade diameter: 275 mm Cutting diameter: 90 mm Stroke: 120 mm Mitre cuts (on both sides): 90 - 30 ° Speed range: 40 / 80 rpm Operating voltage: 380 V Total power requirement: 1.4 kW weight approx.: 290 kg, Approx. Onsite Dimension. (l x w x h): 900 x 800 x 1,300 mm

Key data: 300 mm

Cutter diameter: 300 mm Max. notching width: 350 mm Max. notching depth: 110 mm Max. profile height: 150 mm Feed length: 500 mm Stop between 20° - 90° - 20° Pneumatic Workpiece Clamps Minimum Quantity Spraying Device Manual feed Weight: approx. 280 kg

Description: Saw blade diameter: 275 mm Cutting area (flat): 140 x 70 mm Cutting area (miter): 100 x 70 mm weight approx.: 268 kg, Approx. Onsite Dimension. (l x w x h): 800 x 700 x 1,500 mm

Specifications: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the vice 205 mm - Cutting range - with saw blade diameter 350 mm - at 90° approx. 120 mm - Square 110 mm - Flat up to 200 x 90 mm - or 140 x 110 mm - at 45° approx. 100 mm - flat 100 x 100 mm - Mitre adjustable - Left up to 45° - Right up to 30° - Saw blade speeds 17 + 34 1/min - Drive 400 V / 2 / 2.6 kW - Coolant device - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

Semi automatic Band Saw EISELE THOMAS HTB 350 AO CN Cutting capacity in the round: Ø 260 mm Square cutting capacity: 240 x 240 mm Maxi jaws opening: 310 mm Jaws height: 140 mm Angular cutting Auto clamping of the second vise Auto descent by hydraulic variator Automatic non-functional (machine only work in semi automatic) Voltage: 380 V Length: 2200 mm Depth: 2200 mm Total height in height position: 2000 mm Weight: approx 800 kg

Key data: 300 mm

From a company liquidation Specifications: Eisele VMS 300 Saw blade diameter 300mm Mitre cuts up to 60° right---left 30° possible Right stop + roller block Cutting Areas 90° 120x75mm---45° 80x75mm Round 90mm Saw blade speeds 40/80 m/min Coolant pump Rbeld 380 volts

Description: Punching force: 6.5 kN Max. stroke: 30 mm Projection: 68 mm Approx. Onsite Dimension. (l x w x h): 500 x 500 x 600 mm, weight approx.: 80 kg

Pivoting cross-cut and mitre saw Graule Eisele LMS II with roller support table for wood, aluminum and plastics., cutting height: about 120 mm, cutting width: approx. 80 mm, Roller conveyor length: 350 cm each

dimensions of saw-blade: Ø 320-350 x 3.0 mm cutting range: 120 mm capacity 90 degrees: square: 90 x 90 mm capacity 90 degrees: flat: 200 x 90 mm capacity 45 degrees: flat: 140 x 90 mm work height max.: 925 mm saw blade turning speeds: 17 / 34 U/min compressed air: 6.0 - 8.0 bar engine output: 1400 / 2800 U/min. total power requirement: 2.0 / 2.6 kW weight: 470 kg range L-W-H: 850 x 900 x 1800 mm Machine from a vocational school (NL) maintained condition () Furnishing : - semi-automatic vertical cold circular saw - pneumatic material quick-clamping device - Infinitely adjustable saw blade feed - Convenient miter adjustment with fixed stops - Convenient stroke adjustment of the saw unit using a clamping lever - Generously sized gearboxes - with Eisele rotation compensation for long saw blade service life - Convenient saw blade change - High productivity with minimal space requirements ( ...

saw blade diameter: 275 x 2.5 x 40 mm cutting diameter: 90.0 mm capacity 90 degrees: flat: 140 x 70 mm capacity 90 degrees: square: 80 x 80 mm capacity 45 degrees: round: 70.0 mm capacity 45 degrees: flat: 90 x 80 mm cutting speed: 40 / 80 U/min total power requirement: 1.2 / 1.4 kW weight of the machine ca.: 250 kg dimensions of the machine ca.: 900 x 750 x 1450 mm Machine from training workshop (BOSCH company) maintained condition () Furnishing: - manual cold circular saw - Column-guided saw head - one-sided miter adjustment over mounted turntable Material support table with degrees - mobile machine base - Pole-changing motor (2x cutting speeds) - manual cutting/lifting version - manual material tensioning - 1x circular saw blade - 1x material stop Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9164093 The data for this ad was created with  ...

cutting diameter: 145 mm miter: ja pneumatic lifting portal: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 145 mm : : zwei Geschwindigkeiten cooling: ja type: 41103M00U2 mm : 6791 volt: 400 V frequency: 50 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Saw blade diameter 400 mm Cutting length max. 4000 mm Cutting area flat 140 x 190 mm Speed 2890 rpm Motor power 2.2 kW each Connected power 4.5 kW Machine weight approx. 0.75 t Dimensions LxWxH 5.0 x 1.0 x 1.7 m a pneumatic cylinder must be retrofitted. Approx. Onsite Dimension. (l x w x h): 5,000 x 1,000 x 1,700 mm, weight approx.: 750 kg

Description: Technical data: Cutting width 150 mm Cutting height 120 mm Saw blade dimensions 350 mm Motor power 4.5 kW Cutting length 4000 mm Speeds 2890 rpm Approx. Onsite Dimension. (l x w x h): 5,000 x 1,200 x 1,650 mm, weight approx.: 650 kg

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width:At 90° processing of profiles up to 300 mmTip mitres up to 30° / profile height max. 280 mmNotching depth:at 90° horizontally up to 185 mm / at 90° vertical up to 230 mmMaterial stop:swivel 30° - 90° - 45° Swivel material stop with latching points and digital display Latch height motorized adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps Coolant lubrication

Double head saw EMMEGI NORMA 400 TU/4 Screwing unit GEVO SE1-SA Double head welding machine URBAN AKS 1200 Single head welding machine PRESSTA EISELE APOLLO End milling machine HAFFNER AF 362 Drain slot milling machine ROTOX FWS 380 Copy router STB F130/S Corner cleaning machine STB WP-OF2 Glazing bead saw HAFFNER GL 172

Corner connection press PRESSTA EISELE PV 8 Working height: 930 mm Pressing force: 30 kN Punching height: max. 90 mm resistance stroke. 100 mm punching stroke: 20 mm profile height: 100 mm compressed air supply: 6 - 8 bar with accessories ! used, tested ! Dimensions ( ready for use ): 2400 x 1500 x 1200 mm Dimensions ( transport ): 1200 x 800 x 1400 mm

Suction system suitable for the offered plasma cutting system. New condition. Installation indoors and outdoors possible. Receptacle with quick release. Technical data â?¢ Connection power 11A â?¢ Air capacity 5000 m3/h 46 sheet metal processing machines for the production of angular and round air ducts, e.g. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.

height of profile: 60 mm : 60 weight of the machine ca.: 188 kg dimensions of the machine ca.: 0,85 x 0,45 x 1,25 m foot switch: - Fabr.-No.: 292539 - pneumatic clamping head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used but fully functional. Cooling unit for water cooling also available. Manufacturer: Dalex Type: SL 16-2G Year of construction: not apparent Length of electrode arms: 600mm Foot switch Equipment: • Electrode arms L = 600mm • Substructure / elevation 46 sheet metal working machines for the production of square and round air ducts, e.B. Spiro, Twin Seam, RAS, Prinzing, Tormec, Fasti, Hypertherm, Eisele, Dalex, etc. in our other displays, as well as on request.