edm die sinking used for sale

Brand Gearbox TK Model Gearbox 600S-1 Ratio 1.97,2.53, 2.75,3.04, 3.42 Power 571 HP RPM 2100 RPM General condition BRAND NEW Status AVAILABLE SPECIFIC INFORMATION Sae housing SAE 1 Flexible coupling YES AND ALU. FLANGE Controls NO SPECIFIC FEATURES Brackets YES Oil cooler YES DIMENSIONS Weight (kg) 600 KG

Power unit, diesel generator, diesel generator, container unit used INTERSCHALT Type: WD 1000-1500 N/2.3 Built in 1980 Rated power: 1050 KVA Power: 800 kW Voltage: 10000 V Frequency: 50 Hz Engine Mwm TBD602V16K 945 kW 1500 rpm Generator Siemens 1FG7633 Dimensions: approx. 12 x 2.4 x 2.6 m

EDI Autoflex Extrusion Die width 900 mm.

Reference number 20127 Brand Gearbox TWIN DISC Model Gearbox MG 514 C Ratio 5,16:1 Power 380 HP RPM 1800 RPM General condition USED RUNNING CONDITION Status AVAILABLE SPECIFIC INFORMATION Sae housing SAE 1 Flexible coupling YES Controls MECHANICAL SPECIFIC FEATURES Brackets NO Oil cooler NO

For sale are 20 NEW injection pumps or diesel pumps for 4 cylinder Iveco FPT engine ( 12 volts ) expanded from new engines that were for generators & water pump systems. ( Replaced due to extension to 24 volts ) . Fit for Iveco FPT engine: NEF 45 SM 1 ( 4.5 liters) . Type number & model of pictures. Sale individually or all together Shipping is possible.

For sale are approx. 15 pieces of overhauled or new injection pumps for Deutz 6 cylinders. Please take all data and numbers from pictures. Delivery is possible.

MARINE DIESEL ENGINE Reference number 20132 Brand CUMMINS Model KTA38 M Power 940 HP RPM 1800 RPM Serial number 33121291 General condition Running Taken Out Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor MECHANICAL CONTROL Turbo YES Aspiration Turbocharged / Jacket Water Aftercooled Cooling system Sea water pump, Heat exchanger, Water cooled Starter Electrical Start (24V) Remarks RUNNING ENGINE INCLUDED 2152mm1462mm2083mm SPECIFIC FEATURES PanelDIMENSIONSLxWxH (cm)Weight (kg) Net Weight 4300 kg

STARTMOTOR DELCO REMY - 50 MT - 400 - MODEL 10479339 - SN M13514A

For sale are approx. 15 pieces of overhauled or new injection pumps for Deutz 6 cylinders. Please take all data and numbers from pictures. Delivery is possible.

Diesel filling station - service station - Hoftankstelle - Tankstelle 5,000 litres of content - new to the factory - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey  ...

MITSUBISHIS12A2 MPTK940 HP1940 RPM RUNNER ENGINE EXCELLENT CONDITION AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system KEEL COOLING Starter 2 X ELECTRIC 24 V Remarks EXCELLENT CONDITION, FIXED ON STEEL FRAME DIMENSIONS LxWxH (cm) 2,291 x 1,418 x 1,596 Weight (kg) 3,800 KG

Reference number 20136 Brand MITSUBISHI Model S12R- 2 MPTA SN 11955 Power 1180 HP RPM 1600 RPM General condition RUNNER ENGINE EXCELLENT CONDITION Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system Turbocharged, double cooling,charge air cooler directly cooled by seawater. (Intercooler) Starter 2 X ELECTRIC 24 V Remarks EXCELLENT CONDITION, FIXED ON STEEL FRAME - VIDEO AVAILABLE DIMENSIONS LxWxH (cm) 2,416 x 1585 x 1807 Weight (kg) 5,470 KG

For sale is a refurbished Mercedes OM-444 LA with the engine number 444.901-500-09-020982. The price for the replacement engine is €38,500 plus €25,000 used part deposit. The old part deposit will be refunded if you return your old, identical engine to us. The old engine may be inoperable, but not completely destroyed. Massive damage to the relevant components will be charged after a professional assessment. Are you looking for a different diesel engine? We offer new and replacement engines for many commercial vehicles as well as railway, industrial and agricultural engines with warranty. We sell used, new and refurbished diesel engines from numerous well-known manufacturers. A large number of motors are immediately available from stock. A cost-effective alternative to the new engine is the professional general overhaul of your engine. We can repair this with high quali ...

Reference number 20137 Brand MITSUBISHI Model S12R T2 MPTK (FW) SN 13885 Power 1260 HP RPM 1600 RPM General condition RUNNER ENGINE EXCELLEN CONDITION Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system Turbocharged, double cooling,charge air cooler directly cooled by seawater. (Intercooler) Starter 2 X ELECTRIC 24 V Remarks EXCELLENT CONDITION, FIXED ON STEEL FRAME - WITH CLASS DIMENSIONS LxWxH (cm) 2,556 x 1,622 x 1,728 Weight (kg) 5,500 KG

For sale is a refurbished Mercedes OM-444 LA with the engine number 444.901-500-017.537. The price for the replacement engine is €38,500 plus €25,000 used part deposit. The old part deposit will be refunded if you return your old, identical engine to us. The old engine may be inoperable, but not completely destroyed. Massive damage to the relevant components will be charged after a professional assessment. Are you looking for a different diesel engine? We offer new and replacement engines for many commercial vehicles as well as railway, industrial and agricultural engines with warranty. We sell used, new and refurbished diesel engines from numerous well-known manufacturers. A large number of motors are immediately available from stock. A cost-effective alternative to the new engine is the professional general overhaul of your engine. We can repair this with high quality ...

Fuel oil tank diesel tank steel tank tank system with 20,000 litres capacity, according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and cleaned professionally and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is re-primed and painted on the outside. L = approx. 6.90 m / D = 2.00 m / weight approx. 4.2 to. / ex works, freely charged. General: The price for the gas station is valid from the Söhrewald plant near Kassel, ...

For sale is a refurbished Mercedes OM-444 LA with the engine number 444.901-500-018.101. The price for the replacement engine is €38,500 plus €25,000 used part deposit. The old part deposit will be refunded if you return your old, identical engine to us. The old engine may be inoperable, but not completely destroyed. Massive damage to the relevant components will be charged after a professional assessment. Are you looking for a different diesel engine? We offer new and replacement engines for many commercial vehicles as well as railway, industrial and agricultural engines with warranty. We sell used, new and refurbished diesel engines from numerous well-known manufacturers. A large number of motors are immediately available from stock. A cost-effective alternative to the new engine is the professional general overhaul of your engine. We can repair this with high quality ...

For sale is a new Mercedes OM-444 LA with the engine number 444.901-500-500.557. The price for the replacement engine is €38,500 plus €25,000 used part deposit. The old part deposit will be refunded if you return your old, identical engine to us. The old engine may be inoperable, but not completely destroyed. Massive damage to the relevant components will be charged after a professional assessment. Are you looking for a different diesel engine? We offer new and replacement engines for many commercial vehicles as well as railway, industrial and agricultural engines with warranty. We sell used, new and refurbished diesel engines from numerous well-known manufacturers. A large number of motors are immediately available from stock. A cost-effective alternative to the new engine is the professional general overhaul of your engine. We can repair this with high quality accordi ...

3 unit left in our stock for Diesel Main Engine 2 of them clockwise 1 of them counter clockwise caglar@dortelgemi

2 Unit diesel main engines with 2 unit gear boxes 1 of them clockwise 1 of them counter clockwise caglar@dortelgemi

1) Make:Cummins Model:NT855G4 ENG.No:2.3216300 Ref No. REB2-02 ALTERNATOR Make:Stamford Type:MHC434E Serial Number:Y3157/02 KVA:325 HZ:60 2) Make:Cummins Model:NT855G4 ALTERNATOR Make:Stamford Serial Number:Y3159/01 KVA:325 HZ:60 RPM:1800 V:440/254 3) Make:Cummins Model:NT855G4 Serial Number:5324 ALTERNATOR Make:Stamford Type:HC1434D Serial Number:0113587/01 Date:Oct-99 KVA:295 HZ:50

Make:Detroit Type:12V92 Stamp Marking:12VF 08130 8123-7405 9.93 ALTERNATOR Make:Leroy Fomer Type:M49L8 No.AH052944/01 KW:436 KVA:540 AMP:828 HZ:50 V:380 RPM:1500 Date:Aug-93

Make:Baudouin Type:6m26.2 D185 Serial Number:6M262-1076 / 6M262-1082 / 6M262-1075 KW:440 RPM:1500 Year:2017 ALTERNATOR Make: Leroy Somer Type: LSAM 47.2L9 C 6S/4 No.: 346169/2 - 346159/3 - 346159/1 RPM: 1500 KVA: 500 KW: 400 A: 722 Weight:1392 kg Volt: 400V Hz: 50 Year: 2017

20152 CUMMINS KTA19-M3 600 HP 1800 RPM 2374N.m @1800r/min BRAND NEW AVAILABLE SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) 2450mm x 1150mm x 2000mm APPROX 2500 KG

Engine OM-444 LA from host tracks. Has run 10,000 Tr.

20150 MITSUBISHI S6R2 - PTA 575 kW - 770 HP 1500 RPM Serial Number 82000 General condition BRAND NEW Status AVAILABLE SPECIFIC INFORMATION Flywheel housing Governor Exhaust system Turbo / Aspiration Cooling system Starter Remarks SAE 0 Eelectronic DRY Turbocharged WATER COOLED 24 V BRAND NEW FEATURES Raw water pump DIMENSIONS LxWxH (cm) Weight (kg) 1690 mm x 1077mm x 1578 mm APPROX 2800 KG

2886: 1 gebr. Difiting press 200 kN Fabr. REIS, type TUS 60 OK 20, Bauj. 1991 with hydr. Control Arb.-Ber.: Stroke approx. 700 mm, drive power: 7.5 kW Accessories: extendable table 670 x 570 mm, swing-out top plate 670 x 570 mm, Mounting height 740 mm Other: Passage between the columns 620 mm, Space requirement L/W/H 1870 x 1620 x 3000 mm, Weight approx. 3.5 tons. very good condition

Replacement columns for die-casting machine OL1500, D250 x 5954mm, 250 x 12mm, Oleopress, used - overhauled Special price Attention: We only charge the current raw material price -10%: D 260 x 6m long = 2.550 kg x € 3,5 = € 8925 -10% = € 8032 In addition, we also have a new spar nut and 2 adjusting nuts in separate advertisements. If you have a VAT number, we will gladly issue an invoice without VAT. Second hand! The part was bought from a spare parts store of a company, it was overhouled by a specialist company, is in a very good condition and fully functional. Attention: We have not cleaned the column yet, as the fat layer is optimal for storage. Thread fixed end 300mm lg Thread adjustable end 1160mm lg Weight approx. 2300 kg

Tank system, diesel tank, fuel oil tank, storage tank with 5,000 litres of content - brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repainting - RAL hue / at an addition ...

2005 Model 1765 kw 1800 rpm REINTJES Gear Box 7455/1 1 of them clockwise 1 of them counter clockwise Working hours one of them 3850 and 3960. caglar@dortelgemi

Slideways for die-casting machine, 2580 x 125 x 25mm, Idra, Oleopress, new The new slideways from Olepress / OP die casting come from a spare parts stock of an aluminium die casting company. They fit die casting machines like Olepress, Idra and others. See dimensions Slideways, slide rails for aluminium die casting machines, case hardened steel. The bronze bars of the die casting tables slide on these slide rails. 2580 x 125 x 25mm, bores 4 x D20/14 x 2540 x 90 If you have a UID number, we will gladly issue an invoice without VAT. You are welcome to inspect and check the goods at our premises in Austria, 3130 Herzogenburg.

Tie bar expansion nut for die-casting machine, trapezoidal thread 285 x 10, Oleopress, new Special price In addition, we also have a spare column and 2 adjusting nuts in separate advertisements. If you have a VAT number, we will gladly issue an invoice without VAT. Weight approx. 129 kg As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely new and in its original packaging.

Tie bar expansion nut for die-casting machine OL1500, trapezoidal thread 250x12, Oleopress, new -50% Special price -50% off the original price! In addition, we also have a spare column and 2 adjusting nuts in separate advertisements. If you have a VAT number, we will gladly issue an invoice without VAT. Weight approx. 100 kg As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use and is completely as good as new.

Adjusting nut for die-casting machine OL2000, trapezoidal thread 285 x 10, Oleopress, new -50% Special price -50% of the original price! In addition, we also have a replacement column and 1 piece of spar nuts in separate advertisements. If you have a VAT number, we will gladly issue an invoice without VAT. Weight approx. 259 kg As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely new and in its original packaging.

Adjustment nut for die casting machine OL2000, trapezoidal thread 285 x 10, oleopress, new -50% Special price -50% of the new price In addition, we also have a spare column and 1 piece of tie back in separate displays. If you have a UID number, we will be happy to issue you an invoice without VAT. Weight approx. 259 kg As good as new in original packaging! The part was bought from a spare parts warehouse of a company and has never been in operation, is completely as good as new and in its original packaging.

Replacement columns for die-casting machine OL1600, D250 x 5908mm, 250 x 14mm, Idra, new -50% Special price -50% from new price! Attention: This is a brand new, machined and finished column, for which we ask only the current raw material price: D 260 x 6m long = 2.550 kg x € 2,9 = € 7.395 If you have a VAT number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely as new and in the original packaging. Thread fixed end 290mm lg Thread adjustable end ca. 1160mm lg Weight approx. 2300 kg

Replacement columns for aluminium die-casting machine OL2000, D285 x 6830mm, 285 x 10mm, Oleopress, new -50% Special price -50% of the original price! Attention: This is a brand new, machined and finished column, for which we ask only the current raw material price: D 300 x 7m long = 3958 kg x € 2,9 = € 11.478 In addition, we also have a spar nut and 2 adjusting nuts in separate advertisements. If you have a VAT number we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely new and in ist original packaging.

Gear wheel for mould height adjustment, die casting machine OL1200, Oleopress, new For the aluminium die-casting machine OL1200 from Oleopress, This gear drives the adjusting nut on the column. Special price -50% of the original price! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely as new and in the original packaging. This gear drives the adjusting nut on the column.

; Gross weight [kg]: 800; Engine: Perkins 403A-15G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger, Including: sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

Shot piston to die casting machine OL, D225 mm x 510 mm, Oleopress, used - overhauled Special price! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new condition The part was bought from a spare parts store of a company, was overhauled by a specialist company and is in mint condition. - Piston bronze D225 x 190 mm incl. 5 piston rings - Piston rod D 113 mm - Total length 510 mm - Weight 60 kg

; Gross weight [kg]: 13000; Engine: Mitsubishi S16-R - PTA2; Accessories: Drip pan, Switching panel, Volt meter, Ampere meter, Hertz meter, Start battery, Exhaust system; Power type: 4000002

Cummins KTA50 D(M1) Marine Generator Set Stamford 1491 kva 60 Hz 3 Phase 2002 Model caglar@dortelgemi

MASSON RCD 800 (W8000) 1216 kW /1600 rpm SN 22123 Ratio 3.538:1 1216 kW 1600 RPM Used in excellent condition Available Mechanical Controls Weight (kg) 1800 Dimensions (cm) 125 X 115 X 140

; Gross weight [kg]: 12270; Engine: Perkins 4008TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1450

; Gross weight [kg]: 2400; Engine: Volvo TAD732GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger

; Gross weight [kg]: 16780; Engine: Perkins 4012-46TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000

; Gross weight [kg]: 800; Engine: Perkins 403D-11G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including: sockets 32A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

- brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is fitted with the following fittings equipped: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 5.30 m - D = 1.60 m - weight approx. 2.4 to. - ex works, freely charged - The container is sandblasted from the outside, primed and completely repainted - iron grey / RAL hue. (On request, other RAL colours are also possible!) general: You will receive an invoice with  ...

; Gross weight [kg]: 1456; Engine: Volvo TAD531GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 185

- brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 10,00 m - D = 2.00 m - weight approx. 5.9 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repainting - traffic grey / RAL hue. (On request, other RAL colours are also possible!) general: The price fo ...