e mail used for sale

Extraction filter system, Manufacturer: ESTA, Type: Dustmac F-126 W3, Year of manufacture: 2019, Serial No.: 19002517, Condition: 1 stand kinked, Machine weight: approx. 630 kg, Filter area: 126 m², Dimensions (WxHxD): approx. 183x304x131 cm

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic filter changer: 250 mm Ø, brand: Eurotecno, engine: 4 KW (5.5 hp). With hydraulic unit with accumulator. GT-4753 Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Hydropneumatic operation Profile height: 150 mm Max. hole height: 120 mm Resistor stroke: 100 mm Punching stroke: 18 mm Press force: 28 kN at 8 bar Max. profile height: 100 mm Weight: approx. 250 kg

Manufacturer: TBMA Model: H-AR 300 Year : 2003 Type : Rotary valve External diameter : 450mm Nominal diameter : 300 mm. Motor power : 0,75 KW

Fabricant : TBMA Europe BV Mod?le : H-AR 150 Type : Vanne rotative Diam?tre externe : 300mm Diam?tre nominal : 150 mm. Puissance moteur : 0,25 KW Mat?riaux rotor : acier inoxydable

Manufacturer: Ozaf srl Model: E 10 Year : 1995 Type : Elevating belt with cleats / Giraffe conveyor.   Power : 1,5 Kw Equipment: vibration system Overall dimensions: 65 x 135 x 190 cm Dumping height: 120 cm

Euromate SCS + Coral PR/7.5 - Dust Extraction / Welding Fume Extraction Euromate SCS Air Filtration System - Air filter for welding fumes - 2 cartridge filters (need to be replaced) - Year of construction 2001 Coral PR/7.5 Extraction System - Motor power 5.5 kW - Speed 2800 rpm - Inlet diameter 400 mm - Year of construction 2002

Pressing of profiles up to a profile height of 68 mm Pressing force: 40 kN Pneumatically movable counter bearing, mechanically locked With support arms Weight: approx. 240 kg

Inv. Num. : 5805 Type:- Producer: EKOL Created: 2004 Parameters: Suitable for surface treatment of aluminium profiles with maximum dimensions of 3500 x 1350 x 600 mm Annual capacity: 20-25000 m2 Heating medium: Natural gas Equipment: KOS 2 x 6 x 20 Chamber Degreasing Machine Continuous dryer Transient 2 pieces Application cabin (suction capacity 10000 m3/h) Hardening furnace (4400 x 4400 x 3700 mm) Transport Demi-Water Production Wastewater Treatment Plant

Description: ESSA Eccentric Press REF. 18 no. MPRE-E27 weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 500 x 500 x 1,600 mm

Description: Item.No. T044 067/400 und T044 224/400 Typ: ETF50D.07.69/6.17-36F13.3 und ,ETF900.07.00/14.5.25 HM Approx. Onsite Dimension. (l x w x h): 1,300 x 700 x 1,300 mm, weight approx.: 80 kg

Elevating belt, s/s frame, plastic belt with dividers, belt width: 435 mm, dividers width: 330 mm, dividers height: 100 mm, total dimensions: 1930 mm x 900 mm x 7000 mm.

Description: Welding Equipment with Robot Welding equipment: ESAB LAH 500 R Serial number 321-01700 Usage ,factor at 60%: 500A Usage ,factor at 80%: 450A Usage ,factor at 100%: 400A Current regulation range: 50A - 500A Three-phase connection With wheels ,for easy transport MEC 44 R winder Robot: ASEA weight approx.: 1,600 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 700 x 1,750 mm

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 24245 Specifications: - Feed of the milling unit pneumatically - Work table adjustable in height via handwheel - Horizontal and vertical material tension - Milling cutter diameter up to 300 mm - Max. profile height 190 mm - Max. milling depth 110 mm - Max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - Milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross fence - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Offer 24239 Specifications: - Max. profile height up to 205 mm - Max. profile width 100 mm - Two-way adjustable punching bodies for corner brackets with groove size 25 - 60 mm - Profile chamber offset 0 - 40 mm - Profile rollovers up to 55 mm - Infinitely height-adjustable buttons, punching knives and abutment inserts - Pneumatic connection 6 - 8 bar - Air consumption per stroke 38 L - with: - Footswitch - 2 vertical hold-down devices - Adjustable punching heads - 2 swivel support arms 1000 mm - Space requirement approx. W 850 x H 1250 x D 700 mm - Weight approx. 450 kg

Description: Serial Number:  ,86 8503 Gluing unit Prensor unit de 3 rodillos , End trimming unit ,  ,0,3kw 12000 rpm Top and bottom triming unit power: 1,125kw 12000rpm tilting 45º Profiling unit Scraping unit , Buffing unit:  ,0,37 kw 1500 rpm serial number: 86 8503, Approx. Onsite Dimension. (l x w x h): 5,500 x 1,110 x 1,500 mm, weight approx.: 1,440 kg

Description: M-EDO support guide Working dimensions : 240 mm  , Approx. Onsite Dimension. (l x w x h): 500 x 500 x 200 mm, weight approx.: 8 kg

NN mobile elevating belt with dividers, belt width: 480 mm, distance between dividers: 360 mm, divider height: 60 mm, elevating height: 2360 mm, total dimensions: 2550 mm x 1000 mm x 2720 mm.

Mobile elevating screw, diameter screw: 260 mm, elevating height: 2350 mm, tier: 190 mm, total dimensions: 1600 mm x 1250 mm x 2750 mm.

New brushing machine Brand: Ecoline Type: Windsand 3 New machine for sanding panels and glued frames. 4-side processing Technical data: Dimensions workpiece: Min. length: 500 mm Max. width: 1600 mm Max. height: 120 mm Number of shafts: 6 pieces Power: 12 kW Compressed air: 6-8 bar Suction stud: 5 x Ø120mm Suction power: 6000m³/h Unit - 2 vertical swivable brushes (left / right), diameter 350 mm, to sand the profiled surface of the panels and window frames. - Power of both brushes 0,55 kW - 1 Sanding lamella roller for surfaces, diameter 420 mm; length 1600 mm. - Power 3 kW - 3 upper sanding discs, diameter 400 mm, to process the lengthwise and crosswise positioned wooden fibres . - Power of each discs 1,5 kW; All tools are frequency controlled. All brushes are equipped with quick changable sanding lamellas. All discs will be equipped wi ...

Sanding machine Brand: Ecoline Type: Windsand 4 New machine for sanding panels and glued frames. Technical data: Dimensions workpieces: Min. length: 500 mm Max. width: 1600 mm Max. height: 120 mm Number of shaft: 7 pcs. Power: 12 kW Air pressure: 6-8 bar Suction studs: 5 x Ø120mm Suction power: 6000m³/h Units 2 verticale swivable brushes (left / right), Ø 350 mm, for sanding the outer sides of the panels and window frames. Power of both brushes 0,55 kW 1 Deep brush, Ø 240 mm, for sanding the inner verticale sides and front sides of window frames. Power 0,55 kW 1 upper sanding lamella roller for surfaces, Ø 420 mm; length 1600 mm. Power 3 kW 3 upper sanding discs, Ø 400 mm, for the perfect crosswise process of the the lengthwise and crosswise positioned wood fibres. Power of each disc 1,5 kW; All tools are frequency controlled. Al ...

Brushing machine Brand: Ecoline Type: Rustikmat 2-600 New machine - Upper feeding belt with grip, power 0,75 kW frequency controlled. - Controlled lift of feed belt via ball bearing guidances for precision and a long product life. - Manual height adjustment - Additional pneumatical and self-regulating pressure of brushes via lower pressure pistons to process as well slight convex / concave formed surfaces to get an even finish. - Additional verticale and independant adjustment of the bruhes up to 20 mm via regulator to have a similar wear and tear and to change the depth of the structuration (stronger / slighter). - Transmission of the motors via v-belt. That is the cause of the low weight, minimal maintenance work and in relation a high trasmission. Suctiong housing for each brush. - Additional rollers at infeed and outfeed for more supporting space. 2 Brushes More ...

Description: • Pipe threading machine • Serial number 552239 • Voltage 230V • Motor power 0.60 KW • Spindle rotation 40 rpm • Threading capacity from 1/4' up to 2' (metric thread: from 10 mm up to 36 mm) • Adjustable thread length • Transport dimensions 1200 x 800 x 750 mm weight approx.: 100 kg, Approx. Onsite Dimension. (l x w x h): 700 x 500 x 580 mm

Description: Fabrication number: 467/07 Operating voltage: 400 V Frequency: 50 Hz Rated current: 48 A Connection: 25 kW Speed: 2950 rpm Operating hours read: 2772 Approx. Onsite Dimension. (l x w x h): 5,000 x 1,800 x 3,500 mm, weight approx.: 1,000 kg

pressure:250 t throat:450 mm stroke:36 - 126 mm no. of strokes:40 /min distance table/ram, max. stroke up, adjustment up:525 mm table surface area:1000 x 750 mm hole in the table:400 x 360 mm table height over floor:1000 mm ram surface:600 x 500 mm ram adjustment:111 mm power requirement:19,0 kW weight:13,5 t Dimensions (WxDxH):1,3 x 3,2 x 3,35 m clutch:pneumatic overload protection in ram:mechanical ram adjustment:motoric

We offer a general overhault exchange engine with 12-month guarantee with starter+altenator . We are an Agco Sisu diesel service partner and obstruct / sell only original spare parts. Please contact us: MIW GmbH Motoren Instandsetzungs Werk Nord West Ring 8 D-27404 Zeven-Germany Tel:0049 (0) 4281-950583 Fax:0049 (0) 4281-950585 e-mail: info@miw-zeven.de abc. miw-zeven.de

Spinner for ECRM MAKO 46/36,VR45,VR36, 32,000 RPM, refrushed 2012, with waranty

Spinner for ECRM MAKO 46/36 HS,ECRM VR 36/46-HS, 30,000 RPM, with waranty.

Spinner for ECRM VR 36/46 silver, refrushed 2011, with waranty. Still in operation: No Available: Yes

: ERC 53/1 - CL, Robot Built: 1999 Other X-axis Deform stroke 650 mm Y-axis Vertical stroke 1,300 mm Z-axis cross transport 2,600 mm Basic unit X-axis Deform stroke Max. Travel distance 650 mm drive servo motor Y-axis Vertical stroke Max. Travel 1,300 mm drive Servo motor Z-axis cross transport Max. Travel distance 2,600 mm drive Servo motor C-axis pivoting 0 - 90 drive pneumatic manipulation weight 10 kg pneumatic Air maintenance unit with manual sliding valve Suction circuit with vacuum monitoring 1 gripper circuit with part monitoring 1 electrics Handling control cabinet freestanding The injection moulding machine requires an ERC-cutting standard voltage 3x400V+N+PE / 50 Hz peripheral interface standard General Microcomputer RC 100 integrated screen text German handheld control unit HBG 2, two line display livery chrome yellow RAL 1007 Hardware and software for TEACH IN Sa ...

Water cooler tower,1 MW- 1,040 kW, 2pc, make BALTIMORE, each with 2 fan units, see photo.

Vertical awning electric, for shading high windows and conservatory Height approx. 4 m (can also be shortened) Width 1.3m Fabric fabric White with narrow red stripes, tear-resistant, rot-resistant, dirt-repellent and water-repellent Frame aluminium, powder coated, red Unit price 150,-- total 1500,-

Vertical awning electric for shading high windows and conservatory Vertical awning Height approx. 4 m (can also be shortened) Width 1.3m Fabric fabric White with narrow red stripes, tear-resistant, rot-resistant, dirt-repellent and water-repellent Frame aluminium, powder coated, red Unit price 150,-- total 1500,-

Module formwork system EBAWE / Eilenburg we offer a used module formwork system (year 1996) The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). Plant for the production of space modules in the basic sizes 6000 x 2400 mm, the height can be varied from 2,850 3.100 mm. Thus, the maximum floor height is 3,250 mm. Technical description: Taktfertigung manufactured space cells made of reinforced concrete with at least one open long side without soil in different sizes. Window and door openings, as well as large-scale breakthroughs can be provided. The system consists of the following components: 1.1 Module formwork for the production of space modules) -is the form of Chamber for the production of concrete item (space cell) -The two sides are at the stationary side walls arranged swivel -Vibrators are attached to all w ...

Type: From 500 to 1500KW

Used line for smoothing, separation and drying of small-sized objects made of zinc alloy, brass, aluminum, carbon steel, stainless steel and steel. The line consists of: Temper mill vibration made by Ebra, model EVP-RA 315, new 2006: - Tank capacity of 400 L, - Working capacity of 265 L, - Depth 530 mm working channel, - Weight (without charge and cover) 680 kg, - Dimensions: A x H, fi 1320 x 1060 mm Separator made by Ebra, model TM-350 K, new 2006: - Payload 1000 kg / h, - Engine power of 0.37 kW, - The speed of rotation of the drum 21 rpm - Engine speed 142 rpm, - Transmission chain 5/8 " - Dimensions: width 1000 mm, depth 1200 mm, height 1600 mm Vibration dryer made by Ebra, model EVK-350, new 2006: - Drying tank capacity 300 L. - The capacity of the drying agent 100 L. - Width 380 mm working channel, - Weight (without charge and cover) 610 kg - Documentation avail ...

Engel hose pouring machine type: IT 20000/1800, with Engel ERC 203/1-N Robot control: ERC88 / construction year CC90 A01: In 1991 Schliesseinheit Schliesskraft t: in 1800 cross-beam measure mm: 1400 installation height min / max. mm: 900/1700 record size: In 2100 x in 2100 hose unity snail diameter mm: 160 hose weights gr: 12500 hose volumes cm?: 12958 hose pressure cash: 1600 mass and weights dimensions LxBxH m: 19.8 x 3.5 x 3.1 machine weights kg: 172000 (137000/35000) other with Engel row ERC 203/1-N Robot Euromap 2core

with 2 Fotzellen for autom. Umreifen, frame format 1000 H x 600 mms of B, roller race powered 55-cm height of the ground, 4 steel roles at the entrance 4 roles at the exit, for PP tape format 12x0,63-0,65 mmRollenkern 200 mms / 280 mmBand tensions 100-700 N380V, 50 hertz

Machine according to DIN 8605: lathe with increased accuracy. Top width: 700 mm Tip height: 170 mm Swing over bed: Ã? 340 mm Swing over cross slide: Ã? 190 mm Bed width: 260 mm Longitudinal slide displacement: 600 mm Cross slide displacement: 220 mm Upper carriage displacement: 110 mm Plan carriage length: 410 mm Plan slide width: 150 mm Bed slide length: 380 mm Turning tool cross section: 20 x 20 mm Distance turning Center - upper carriage: 34 mm Range of the upper carriage (support): 60 / 120 ° Main spindle: Spindle connection DIN 55029 (camlock): S 5 spindle bore: Ã? 50 mm Internal cone according to DIN 7178: 1:22 spindle diameter in front bearing: Ã? 70 mm Maximum Chuck diameter: Ã? 200 mm Faceplate diameter: Ã? 200 mm Spindle speeds: 40-3000 rpm Speed: Stepless mechanical speeds: 4 Main drive: Power at 40% ED: 5,3 kW Maximum nominal torq ...

; ready for operation

Plant: frequency inverter inverter needed Manufacturer: VEE Voith-Elin electronics Type: Elovert SD 400/15C18.5P 8852520.00 Input: Data L: 400 V + 10-15% q: 50/60 Hz +/-5% I: 27A/35A Output: Data L: 0.. 380 (415) V q: 0.. 300 Hz I: 30A nominal / 38 A continuous Protection IP: 20 Serial No.: 255999 Condition: well maintained

Frequency inverter inverter Plant: frequency inverter inverter needed Manufacturer: VEE Voith-Elin electronics Type: Elovert SD 400/18 5C22P 8853540.00 Input: Data L: 400 V + 10-15% q: 50/60 Hz +/-5% I: 36A/46A Output: Data L: 0.. 380 (415) V q: 0... 200 Hz I: nominal 40A / 50A continuous Protection IP: 20 Serial No.: 256559 Condition: well maintained

<br>Spinner for ECRM VR 36 / 46 silver, refrushed 2011, with waranty.<br><br>Still in operation: No.<br>Available: Yes

<br>Spinner for ECRM MAKO 46/36 HS, ECRM VR 36/46-HS, 30,000 RPM, with waranty.<br><br>Still in operation: No.<br>Available: Yes

<br>Spinner for ECRM MAKO 46/36,VR45,VR36, 32,000 RPM, refrushed 2012, with waranty.<br><br>Still in operation: Yes<br>Available: Yes

Molding machine of Mag Type: Ergotech 250-1450 system control: NC 4 year of construction: 1996 Clamping unit Clamping force t Gap between 250 mm: 575 Holm dimension mm: 560 x 560 min/max height mm: 660 / 760 Plate size: 830 x 830 injection unit Screw diameter mm: Gr 70 injection weight: 940 Injection volume cm 3: 1039 spray pressure bar: 1400 Dimensions and weights Dimensions Lxwxh m: 5.7 x 1.7 x 2.2 machine weight kg: 11200 Miscellaneous 2 core EUROMAP 12

Molding machine of Mag Type: Ergotech 100-430 system control: NC 4 year of construction: 1999 Clamping unit Clamping force t 100 gap mm: 500 Holm dimension mm: 400 x 400 min/max height mm: 250 / 750 Plate size: 590 x 590 injection unit Screw diameter mm: Gr 40 injection weight: 205 Injection volume cm 3: 231 spray pressure bar: 2020 Dimensions and weights Dimensions Lxwxh m: 4.4 x 1.4 x 1.8 machine weight kg: 4400 Miscellaneous EUROMAP pull 12, 1 core

ELCO econom 2000 heating system Hall heating Air conditioning Wolf Type/serial No. 100-2 9201 Motor power 1 .1kw Nominal current 5.2/3,0A Voltage 380V Mot.Drehzahl 1500min Heat output of 63kW Air flow 5000 m³/h p.ext. 25Pa Ã?ldurchs. 6, 0 kg/h DIN-DVGW 90.03 f where Functionality is not known, the device is offered as a spare part supplier. Can the proper dismantling and pick-up at the location The iron bridge 16, 65795 Hattersheim be made. We are happy to answer questions phone 06190-93449-0 The complex can be visited by appointment. Price VB, make an offer. -> Note Please also our other ads &lt; -. We can offer you several thousand square metres of used formwork, scaffolding and tools - ask us! (SoPo 411)