dörr used for sale

Description: Face plate diameter 1800 mm weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 4,800 x 4,000 x 4,600 mm

Description: Dörries single-column vertical lathe with 2.4 m swing diameter for turning, drilling and milling operations. Components can be completely machined in a single clamping operation. Control system and Machine number Control: SIEMENS Sinumerik 840 D Machine number: ,V-800292 Geometric main dimensions Machine table diameter: 2200 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2145 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Crossbeam travel: 1000 mm (100 mm steps) Cross beam support Travelling distance: ± 1350 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 400  ...

Description: Dörries single-column vertical lathe with 2.4 m swing diameter and hydraulic clamping table. Control and machine number SIEMENS Sinumerik 840 D control system Machine number: V-800289 Geometric main dimensions Machine table diameter: 2000 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2445 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Cross beam support Travelling distance: ± 1350 mm Crossbeam travel: 1000 mm (100 mm steps) Crossbeam travel (100 mm steps): 1000 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 400 mm/min Milling drive Milling drive power: 37 k ...

Description: Dörries single-column vertical lathe with 2.4 m swing diameter for turning, drilling and milling operations. Components can be completely machined in a single clamping operation. Control system and Machine number Control system: SIEMENS Sinumerik 840 D Machine number: V-800291 Geometric main dimensions Machine table diameter: 2200 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2145 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Crossbeam travel: 1000 mm (100 mm steps) Cross beam support Travelling distance: ± 1350 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 40 ...

Description: Dörries single-column vertical lathe with 2.4 m swing diameter. Control and machine number SIEMENS Sinumerik 840 D control system Machine number: V-800290 Geometric main dimensions Machine table diameter: 2000 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2445 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Crossbeam travel: 1000 mm (100 mm steps) Cross beam support Travelling distance: ± 1350 mm Crossbeam travel (100 mm steps): 1000 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 400 mm/min Milling drive Milling drive power: 37 kW Speed range in 2 gear stag ...

Condition: Very good, Control: CNC SINUMERIK 840 New in: 1986/2005 Localization: our work house in Rudniki - Poland Lathe is fitted with C-axis and driven tool, pallet changer Technical data: Max diameter: 2200 mm Max turning height: 1800 mm RAM: 1500 mm Main engine: 75 kW Spindle speed: 45- 1350 rpm Spindle motor: 15 kW Max workpiece weight: 12 000 kg Pallet changer (3 pallets): Tool magazine: 16 pieces for turning 16 pieces for drilling Auto tool probe Auto detail probe Engine space required: 11000 x 11000 mm

Clamping table of Dörries Diameter: Ã? 1600 mm Height: 1,000 mm Weight: 4.200 kg

faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1250 mm stroke of ram - solid: 750 mm Side head: 650 mm turning speeds: 4-210 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mm swing diameter: 1650 mm turning height: 950 mm ram head dimension: 200x200 mm control: Heidenhain type: Manuel Plus 410 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 980 mm table load: 3 t Control: Siemens type: Sinumerik 880T x-axis: 1000 mm z-axis: 1000 mm w-axis: 600 mm c-axis: 360 ° live tooling: Tool changer: 62 Pos. chip conveyor: coolant: grinding head: horizonzal grinding head: vertical power capacity - table: 69 kW total power requirement: kW weight of the machine ca.: 26 t dimensions of the machine ca.: 8,7x7x5,2 m • Table speed / Drehzahl der Planscheibe: 2 Getriebestufen, Drehzahl = 4,5 – 500U/min • Ram section / Stößel Querschnitte: 240mm x 240mm • Live tools speed / Drehzahl der angetriebene Werkzeuge: o Schleifspindel waagerecht: 3000U/min o Schleifspindel senkrecht: 3000 – 6000U/min o Fräsen: 10-2000U/min • Live tools power / KW Leistung der angetriebenen Werkzeuge: o Schleifspindel waagerecht: 3kW o Schleifspindel senkrecht: 3kW  ...

X-travel: 17,000mm, y-travel: 4500mm, z-travel: 1400mm, W-travel: 1000mm, table dimensions: 3300x4400mm, max. workpiece weight: 95t, spindle diameter: 180mm, control: Siemens Sinumerik 880, with documentation, three additional angular milling heads are available, on-site inspection is possible.

X-travel: +/-2750mm, z-travel: 2000mm, B-travel: +/-90°, C-travel: 360°, table diameter: 4500mm, turning and circumferential diameter: 5000mm, max. turning height: 2645mm, rotational speed: 8-3000/min, controls: Siemens SINUMERIK 840D, with documentation, base, stand, crossbar, support and chisel pusher.

drill diameter: 40 mm drilling length: 500 mm lip angle: 160 ° clearance angle: 1 - 10 ° toolpiece turning speed range: 42/28/21 U/min feed range: 0,6-1,2-1,5-3,0 mm/min grinding wheel size: 210 x 127 x 50 mm grinding spindle speed: 3150 U/min power capacity: 3,3 kW weight of the machine ca.: 1200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3200 mm swing diameter: 5100 mm turning height: 2505 mm cross rail - adjustment: 1500 mm max. ram stroke: 1250 mm slide adjustment: 2000 mm control: Siemens 8 T tool changer: 16 STK table load: 60 t faceplate turning speed range -stepless-: 0,8-100 U/min feed: 0,0 1-1000 mm/min rapid traverse: 6000 mm/min drive of main spindle: 75 kW weight of the machine ca.: 70 t dimensions of the machine ca.: 9,3 x 6,1 x 6,0 m machine is in an excellent condition with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1250 mm stroke of ram - solid: 750 mm Side head: 650 mm turning speeds: 4-210 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1250 mm cross rail - adjustment: 600 mm work spindle adjustment: 750 mm Tools changer for 12 tools: total power requirement: 69 kW weight of the machine ca.: 25 t dimensions of the machine ca.: m reconditioned The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mm swing diameter: 2865 mm turning height: 3000 mm Control: R & D type: MTC 4 Rest: 2 slide adjustment: 1500 mm turning speeds: 140 U/min tool change unit: 12 Pos. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Machine is modernized The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1600 mm swing diameter: 2100 mm turning height: 1700 mm Control: R & D type: MTC 4 turning speeds: 280 U/min workpiece weight: 20000 kg Tool changer: 14 Pos. : total power requirement: kW weight of the machine ca.: 2800 t dimensions of the machine ca.: 3,7x3,75x5,1 m Machine is modernized The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 1500 mm Control: Siemens type: 880T Table load: 6000 kg cross rail - adjustment: 700 mm Max ram stroke: 1000 mm turning speeds: 400 U/min transmission ratio: 2 Feed: 3-8000 mm/min Tool changer: chip conveyor: total power requirement: 69 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

a well-preserved CNC portal milling machine Dörries Scharmann] type FZ 25, built in 1994, table 6000 x 2500 mm, travel distances X/Y/Z 6000/2500/2000 mm, portal passage 3000 mm, table load approx. 40 tons, with automatic milling head change. CNC control Heidenhain TNC426, dimensions approx. 18 x 8 x 7 m, weight approx. 174 to.

faceplate diameter: 3500 mm swing diameter: 4100 mm turning height: 1400 mm Control: Siemens Slide movement horizontal longitudinal: 2100 slide adjustment: 1300 mm cross rail adjustment: 1300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 4500 mm swing diameter: 5000 mm turning height: 2645 mm control: Siemens 840 D cross rail adjustment - vertical: 1500 mm max. ram stroke: 2000 mm ram head dimension: 300 x 300 mm faceplate turning speed range: 0,4 - 95 U/min main drive: 2 x 80 kW faceplate load max.: 80.000 kg Equipment / Accessories: - C-axis driven tools HSK 100, 37 kW, 3000 rpm - hydrostatic guides of the linear axes - UWFK milling head 500 Nm +/- 90°, tool and workpiece measurement - tool and process monitoring ARTIS CTM system - workspace visualisation via video camera on the support - tool magazine (arranged on the floor) for turning and milling tools as well as storage for milling heads - work area protection completely closed with automatic covering of the chip chutes - coolant system with filter system, chip conveyor - various tool holders - documentation The data for this ad was created ...

faceplate diameter: 1000 mm swing diameter: 1400 mm turning height: 1100 mm Control: Siemens type: 840 D Shop Turn Tool changer: x-travel: 2000 mm z-travel: 700 mm slide adjustment: 1000 mm Rapid movement: 6000 mm/min turning speeds: 500 U/min : total power requirement: 62 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale, it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 7000 mm, 1600 mm, 800 mm

Complete system with all the accessories necessary for installation and operation, Travel x = 7000 y = 1600 z = 800 / transverse stroke w = 600mm / General overhaul 2007, year of production 1991: New Siemens Sinumerik 840D control system, new drive motors, guide guides refurbished, new control cabinets. ECOCUT 1 was then operated for only a few months / Travel speed 12000 mm / min / w axis 6000 mm / min turntable TDV 2 max. workpiece weight 6t / clamping surface 1000x1000 turntable TDV 3 max. workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angle crank / chain tool change system / plate field / complete housing / Knoll hopper feed / suction / coolant system with belt filter All BWF fixators for the installation of machine bed and plate

faceplate diameter: 4500 mm swing diameter: 5000 mm turning height: 2645 mm Control: Siemens 840 D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Equipment: CNC control Siemens Sinumerik 840 D Direct measuring system C-axis with extension of the workpiece measurement Hydrostatic guidance of the linear axes Workpiece measurement Tool measurement Tool and process monitoring ARTIS CTM system Workroom surveillance with video camera (at the support) Processing heads with automatic tool clamping UWFK 500 Nm, +/- 90° manually pivotable Various tool holders, type 300.2 Tool magazine 24 to 72 Platu magazine pick-up plate Loading crane for the tool magazine, load capacity 500 kg Loading device with HSK, capto-, KM tool holder Machine protection device Automatic cover of the chip chute Working area protection completely closed Preparation for installing a ...

swing diameter: 2400 mm turning height: 2145 mm Control: Siemens 840 D turning speeds: 250 U/min Speed range - c-axis: 0,0025 - 3,15 U/min Smallest input increment of the c-axis: 1/1000 ° speed steps of main gearbox: 2 x-travel: +-1350 mm z-travel: 1500 mm Positioning of the crossbar - grid spacing: 100 mm : 400 mm/min machine table: power capacity: 100 kW diameter: 2200 mm Torque: 35700 Nm workpiece weight: 17000 kg Right crossbar support: bit feeder section: 250 x 250 mm Immersion diameter: 340 mm x-travel: +- 1350 mm z-travel: 1500 mm Drilling and milling device: Distance of m.spindle to upper edge of t. table: 62,5 mm power capacity - milling spindle: 37 kW total power requirement: kW weight of the machine ca.: 62,5 t dimensions of the machine ca.: m crossbar adjustable! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of construction 2008 Control system Siemens 840 D Rotational diameter. [mm] 2400 Turning length [mm] 2145 General: Year of construction 2008 Control system Siemens 840 D Turning diameter 2,400 mm Rotation height 2,145 mm (stand elevation 900 mm) Machine Table: Technology gear table, 2 stages Drive power 100 kW Torque 39,700 Nm Holding torque milling operation 44,800 Nm Speed 250 rpm Face plate diameter 2,200 mm Table load max. 17,000 kg C-axis 0.001° Drilling and milling equipment: Technology Gear Spindle Speed max. 3,000 rpm Power 37 kW Torque 1,230 Nm Tool holder Capto C8 Crossbar: Vertical travel 1,000 mm Grid spacing 100 mm Distance between milling spindle and table 2,350 mm Support: Travel X-axis +/- 1,350 mm Z-axis travel 1,500 mm Chisel slide cross-section 250 x 250 mm Immersion diameter 340 mm Rotate tool holder Capto C6 Tool Hold ...

swing diameter: 2800 mm turning height: 1195 mm Control: Siemens 840 D turning speeds: 224 U/min x-travel: +-1600 mm z-travel: 1100 mm machine table: diameter: 2500 mm workpiece weight: 25000 kg power capacity: 80 kW Torque: 35900 Nm total power requirement: kW weight of the machine ca.: 66,5 t dimensions of the machine ca.: m faceplate diameter: mm Dörries 6, Machine no. V-800293 - Fixed crossbeam, no tool drive Ram -Cross section of ram: 250 x 250 mm -Travel ram: 1100 mm Equipment/accessories: -Tool changer revolver 4-times in the ram -Own filter system -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 2400 mm turning height: 2445 mm Control: Siemens 840 D feed range: 0-18000 mm/min table diameter: 2000 mm max. table load: 17000 kg total power requirement: 100 kW weight of the machine ca.: 75 t dimensions of the machine ca.: 10.000 x 5.500 x 7.100 mm Dörries 2, machine number V-800289 with hydraulical chuck, without milling function Crossbeam: -Travel crossbeam: 1000 mm (100 mm steps) -Crossbeam support travel: ± 1350 mm Ram : -Cross section of ram: 250 x 250 mm (minimum immersion diameter:380 mm) -Travel ram: 1500 mm Equipment/accessories: -No driven tools -Tool changer/head changer 72 times -Hydraulic chuck -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 1600 mm turning height: 1285 mm Control: Siemens 840 D turning speeds: 400 U/min x-travel: +- 950 mm z-travel: 1100 mm workpiece weight: 9000 kg power capacity: 80 kW Torque: 19900 Nm table diameter: 1400 mm weight of the machine ca.: 42 t dimensions of the machine ca.: 7600 x 5200 x 5400 mm Dörries 7, Machine number V-800294 Crossbeam: -Cross beam travel: 600 mm Ram: -Ram cross section: 250 x 250 mm (immersion diameter: 340 mm) -Ram travel 1100 mm Equipment/accessories: -Tool magazine -Own filter system -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1000 mm swing diameter: 1500 mm turning height: 1700 mm Control: Siemens type: 810 transmission ratio: 2 turning speeds: 500 U/min Tools changer for 12 tools: paper filter: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Dörries Single-column Vertical Lathe with 2.4 m swing diameter for turning, drilling and milling operations. Components can be completely machined in a single clamping operation. Control system and Serial number Control: SIEMENS Sinumerik 840 D Serial number: ,V-800288 Geometric main dimensions Machine table diameter: 2200 mm Maximum table load: 17 tonnes Rotation diameter: 2400 mm Working height: 2145 mm , Cross-section of ram slide: 250 x 250 mm (minimum dipping diameter: 380 mm) Travelling distance of ram slide: 1500 mm Crossbeam travel: 1000 mm (100 mm steps) Cross beam support Travelling distance: ± 1350 mm Tool change path: 720 mm Machine drive Drive power main drive: 100 kW Speed range in 2 gear stages: 1.3 - 250 rpm Feed drives , Horizontal and vertical cross beam support: 0 - 18000 mm/min Cross beam adjustment speed: 400 mm ...

Description: Dörries VCE 2800 SM F Single-column Vertical Lathe with 2.8 m swing diameter. Control system SIEMENS Sinumerik 840 D Geometric main dimensions Swing diameter: 2800 Basic turning height with fixed crossbeam: 1335 Turning height including adjustment of the grid steps: 1935 mm Cross-section of chisel slide: 250 x 250 mm , Travelling distance of chisel slide: 1100 mm Fixed Crossbar Machine table Machine table diameter: 2500 mm Maximum table load: 25 tonnes Drive power main drive: 80kW Torque on machine table: 35900 Nm Speed range in 2 gear stages: up to 224 rpm Feed drives and Cutting forces Horizontal and vertical crossbeam support: 0 - 18000 mm/min Cutting force when turning: 19000 N Tool system Vertical 4-fold Capto C6 turret Please have a look at the technical data and the layout plans in the PDF file. turning height: 1,935 mm, swing di ...

faceplate diameter:1800 mm swing diameter:2000 mm turning height:1170 mm z-axis:1000 mm cross rail adjustment - vertical:800 mm faceplate speeds::2,5 - 280 workpiece weight:12 t feeds:1 - 6000 mm/min max. torque on the faceplate:50000 Nm total power requirement:85 kW weight of the machine ca.:41 t dimensions of the machine ca.:5,6 x 4,8 x 4,6 m Machine retrofit and overhould in 2005 with SIEMENS 840 D powerline control - 6 jaw hydraulic power chuck - tool changer for 12 tools - chip conveyor, coolant attachment, splash housing - various tool holders

faceplate diameter:1000 mm swing diameter:1600 mm turning height:1200 mm main drive:75 kW faceplate speeds from - to:7 - 800 U/min milling motor:25 kW milling head speed:7 - 3000 U/min milling spindle - taper:ISO 50 cross rail adjustment - vertical:800 mm ram head dimension:240 x 240 mm weight of the machine ca.:40 to dimensions of the machine ca.:9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor

faceplate diameter:1400 mm swing diameter:2000 mm turning height:1500 mm main drive:80 kW faceplate speeds from - to:1 - 355 U/min milling motor:37 kW milling head speed:7 - 3000 U/min milling spindle - taper:ISO 50 cross rail adjustment - vertical:500 mm ram head dimension:240 x 240 mm max. ram stroke:1250 mm weight of the machine ca.:50 to total power requirement:133 kVA dimensions of the machine ca.:11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories

faceplate diameter:6000 mm swing diameter:6500 mm turning height:3000 mm slide stroke:2500 mm cross rail adjustment - vertical:1800 mm faceplate turning speed range:0,40 - 78 U/min workpiece weight max.:80.000 kg main drive motor:150 kW total power requirement:180 kW weight of the machine ca.:160 t dimensions of the machine ca.:15 x 10 x 8,7 ü.F. m with CNC NUM 1060 hydrostatic guideways 6000 mm power chuck C-axis driven tooling SK 50 / 30 KW / 6 - 2000 rpm. angular milling head automatic toolchanger 50 pockets turning toolholders CAPTO C 6 / 47 Milling toolholders SK 50 coolant attachment and chip conveyor

Table diameter: 3200 mm Turning diameter: 5100 mm Turning height: 2650 mm Motor power: 75 HP/kW Positions ATC: 16   Positions APC: 0   CNC Brand: Siemens CNC Model: Sinumerik System 8 Make CNC Dorries Type CTE 320 / 3400 CNC Siemens Sinumeriek Year 1981 - Ex Aerospace Dorries cte 320 Centre height (mm) Chuck 3200 mm Center distance (mm) Max swing 5100 mm Spindle bore Height 2650 mm Table load 60 Tons Toolchanger 16 Positions Speed 100 Rpm / 6000 feeds  - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Dörries CNC Vert. boring mill single column with displaceable table - Make : Dörries - Germany - Typ : CTE 320 / 3400 - Age : 1981 – Ex. Aerospace ! - Serial.No : D 149 / 5079 - Chuck Ø : 3.200 - Max. turning Ø Pos. 2 : 5.100 - Max. turning height : 2.650 - Slide adjustment : 2.000 - Stroke Tool holder : 1.250 - Cross r ...

spindle diameter: 160 mm x-travel: 10.000 mm y-travel: 3.000 mm Control: total power requirement: 120/63 spindel kW weight of the machine ca.: 63 t dimensions of the machine ca.: 15x3.85x7.36 m Stocknumber 1210057 Type of machine CNC Floortype boring machine Make WOTAN Type Rapid 5C Build in 2004 Type of control HEIDENHAIN iTNC 530 Spindle diameter 160 mm X-stroke (mm) 10.000 Y-stroke (mm) 3.800 Z-stroke (mm) 700 W-stroke 700 mm Tool Taper Iso 50 Speeds (Rpm) 1,25 - 1250 Feeds (mm/R) 1 - 5000 mm/min Rapid feeds 5 mtr/min. Total Power (KW) 120 /spindel 83 Lenght (mm) 14.500 Width (mm) 3.850 Height (mm) 7.360 Weight 62.300 kg Additional information completely overhould in 2004 and retrofitted by Dorries Scharmann with CNC control HEIDENHAIN iTNC 530 - 4 different angular milling heads - hydrostatic spindle bearing - aerostatic guideways - coolant device - chip conveyo ...

Table diameter: 3000 mm Turning diameter: 3500 mm Turning height: 2245 mm Motor power: 0 HP/kW Positions ATC: 0   Positions APC: 0   CNC Brand: _Unknown / Other CNC Model: R & D - MTC S01 Make Dorries 35 Type SD 300 Year 1979 / 1998 R & D - MTC S01 Centre height (mm)Table = 3.000 Center distance (mm)Swing = 3.500 Spindle bore Height = 2.245 Table load = 25 Ton Table speed = 100 Rpm Cutting force = 75000 N  

Table diameter: 2000 mm Turning diameter: 2200 mm Turning height: 2150 mm Motor power: 0 HP/kW Positions ATC: 0   Positions APC: 0   Make Dorries 22 Type SDE 200 Year70 er Double support Centre height (mm)Table = 2.000 Center distance (mm)Swing = 2.200 Spindle bore Height = 2.510 Speeds 125 Rpm Digital read outConical turning device  

Table diameter: 1250 mm Turning diameter: 1400 mm Turning height: 1180 mm Motor power: 0 HP/kW Positions ATC: 0   Positions APC: 0   Make Dorries SDE Type SDE 125 Year 1975 Dorrie SDE Singel column vertical borer karussel Centre height (mm) Table = 1.250 Center distance (mm)Swing = 1.400 Spindle bore Height = 1.180 250 rpm / 5 ton load 2 axis droside head  

Gantry type CNC Vertical Machining Center Maker : Dorries Scharmann New : 1993 /2009 CNC retrofitted Model : 100FZG 600/700 CNC Control : Siemens 840D Table size : 6000 x 21000 mm Workpiece length : 22000 mm width : 7000 mm Height : 6000 mm Milling ram stroke : 2000 mm Milling spindle motor : 140 kw Rotating speed : 20 ~2000 rpm Milling ram section : 550 x 460 mm With ATC, 8 AAC as 3 Angle attach, Universal attach, 3 special attach.

Dorries Model SD250 Vertical Boring Mill/ Turret Lathe Year: 1978 Flush Floor Diameter of 4-jaw chuck: 98.5"/ 2501 MM Maximum swing, side head down: 110"/ 2794 MM Height under rail: 85"/ 2159 MM Table Load Capacity: 110,000 Lbs Cross travel of ram head: 61" Vertical travel of ram head: 42" Maximum Capacity Under Tool: 70" Side head: none Table speeds: 112 RPM Variable Main drive motor: 75 HP Current Electrical Arrangement: 480/3/60 ¯ Complete With: 98" 4 Jaw Chuck (1) Swiveling Ram Head (1) 5 Position Swiveling Turret Head Full Pendant with digital readout Baldor Variable Drive Coolant Tank Flush Floor Threading Video Available

DORRIES VCE 2400/200 MC/FC 3 Turning Plates Changer (translating pallet system) EQUIPPED WITH: Siemens Sinumerik 840C CNC Control (2015 Retrofit) Vertical Ram with Live Spindle Pallet Changer (3-Pallets) 16-Station Automatic Tool Changer C-Axis Table Year 2005 CNC Siemens 840 C Plate dia.: 2000 mm Max. turning dia.: 2520 mm Max. turning height: 1990 mm Ram travel: 1500 mm Main drive motor: 75 kW Live spindle: Spindle rotations: 45 - 1500 1/min Spindle motor: 15kW Max. workpiece weight: 12 Ton Tool magazine: 16(turning)+16 (drilling) Station Automatic Tool Changer Auto tool probe Auto detail probe Pallet changer with 3 pallets (turning plates) Table rotation (2 ranges): 1. 2,5 – 70 2. 10-280 Machine space required: 11000 x 11000 mm Video before dismatling

length: 1540 mm width: 1370 mm depth: 1000 mm hollow: 250 mm clamping range: Max. ca.1300 mm weight of the machine ca.: / t required space: / m Hydraulic clamping device Dismantled from the Dörries Scharmann Solon horizontal machining centre. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1440 mm width: 1400 mm depth: ca. 780 mm hollow: 350 mm clamping range: / mm weight of the machine ca.: / t required space: / m Hydraulic clamping device Dismantled from the Dörries Scharmann Solon horizontal machining centre. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.