durchmesser 110 mm used for sale

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 79600 € : 1615.88 € : 110 to : 900 mm : 540 mm : 180 mm : 14 - 114 mm : 60 1/min : 490x325 mm : 90 mm : 280 mm : 7,5 kW : 1870 mm : 1320 mm : 2800 mm : 5600 kg 8-fold ram guide front protection by light guard manual ram adjustment mech. overload safety device automatic lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration

The scope of delivery includes: 01x wire mesh grate, new Material color: sendzimir galvanized Load: 500 kg; at the same time. distributed load Version: laid up Depth: approx. 1,100 mm ( rod direction ) Width: approx. 1,150 mm Mesh size: approx. 100 x 60 mm Number of walkways: 3 pcs. Weight: 5,00 kg | Pcs.

used single-shaft shredder Manufacturer: LINDNER Type: VEGA 1100 L Year of construction: 2013 specifications: Filling volume: 1.7 m³ Working opening: 1,100 x 1,800 mm Rotor length: 1,090 mm Rotor flight circle: 434 mm Rotor speed: 100 rpm. Drive power: 45 kW Pneumatic pusher: 6 bar Weight: approx. 6,000 kg

price outside EU: 19.750,- € gross price: €23,502.50 - - - - - Iveco emergency generator set 110 kVA - Stage 3a + + NEW - Year of construction 2023 - 1500 rpm + + - - - - - - Manufacturer: HIMOINSA (Spain) - - - - - Engine: - Iveco (Italy) - Model: NEF45 - 4 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Stamford / MeccAlte - 100 / 110 kVA - 230 / 400 volts - 50 Hertz - AVR ESC - - - - - Control / Starter unit: - Digital Himoinsa CEM7 control - Hand start at the push of a button - Automatic start function - Generator monitoring: Volt, Ampere, Hertz, kW - Many motor monitoring indicators and engine protection functions - Operating hours counter - - - - - Other data: - Emission standard: STAGE 3A - Dimensions: 275 x 110 cm - Weight: 1690 kg - Tank volume: 240 liters - Sound level: approx. 67 dB ...

Technical data paper shredder: Manufacturer Bollegraaf Type HBS 110 - 1500 Year of manufacture 1994 Drive power 110 kW Throughput approx. 25 t/hour Dimensions of feed hopper 1,970 x 2,000 mm Dimensions of built-up machine 3,160 x 4,400 x 3,980 mm (L x W x H) Weight approx. 11.5 t Special features: The drive unit is equipped with a hydraulic fluid coupling that minimises current peaks during start-up and operation. The rotor is mounted on oversized roller bearings and equipped with replaceable hammers that are extremely wear-resistant. Range of applications: The shredder was used to shred paper, cardboard, newspapers, magazines, books, etc. in order to achieve optimum compaction and dimensional stability of the bales in the downstream baling press. Condition of the shredder: The shredder is in good working condition and will be dismantled at the end of April. Scope of delivery: Shredder ...

Brand 1110F - KDF110 Optimat Brand: Brandt Type: KDF 110 Year of construction: 2015 M-No.: 0-261-20-5386 Control: Easy Control 10+ Non-contact route control Feed controlled with start-stop optic-indicative sensors Screen: LCD, 420 letters, 4 program memories Configuration: Chain conveyor feed: Standard equipment with central lubrication for the transport chain. Top pressure rollers/product guidance: Zentra control, 2 roller conveyors positioned opposite each other Joint milling unit: 2 x 0.75 KW 200 HZ Including joint milling set in DIA design, with manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness Gluing unit: A3 gluing part for hot melt glue and possibility for PU application, magazine, pressure zone with electro-pneumatic 2 point positioning via central control Pressure zone: 1st roller driven and 2 rollers running freely fo ...

available GK-110E / Intermix complete with hydraulic Hopper, gear Box and Motor Description attached!

Control: Fanuc ? The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wide belt sanding machine Bütfering Type: MA2W1100 Year of construction: 1983 Grinding width 1100 mm 2 grinding units Grinding roller motor power 15 kW and Sanding shoe motor power 15 kW With driven cleaning brush motor 0.55 kW Feed with 2 speeds 10 and 20m/min. Feed motor 1.8 kW Vacuum transport carpet complete with fan Constant table The complete machine upper frame is moved via four trapezoidal threaded spindles. Sanding belt width 1110 mm Sanding belt length 1900 mm Workpiece thickness maximum 150 mm Total connected load 35 kW Industrial version Suction connections 2 x 200 mm, 1 x 160 mm diameter Weight approx. 3.800 kg Dimensions 2500 mm x 1750 mm x H 2000 mm

: neu : 2023 : 9681 : prompt, Zwischenverkauf v : Polen : 7810 € : 161.14 € : 1 : 47 to : 110 mm : 27 mm : 25x18 mm : 8 s : 16 mm : 700 bar : 479 mm : 135 mm : 388 mm : 35 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up Wide range of special-shaped punches and dies OPTIONAL: Gantry punching station for increased productivity and operation comfort € 720,- 1 Set punch and dieDm. 16 mm € 68,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data for Tiefensteg: Shewing system: Meta (Thyssen) The scope of delivery includes: 01x Tiefensteg, used Material color: yellow Version: lowered Lowering: approx. 22 mm Total length: 1.115 mm suitable for stand depth: 1.100 mm clear span: 998 mm Truss support: approx. 52 mm Profile abm.: 85 x 50 mm Weight: 3,70 kg | Pcs.

Power: 100 kVA Year: 2019 Operating hours: None Generator: Stamford Cooling: Water Speed: 1500 1/min Voltage: 400/231 V, 50 Hz Tank: 225 litres Subject to prior sale - errors possible Internal reference number: E-1004-56

pressure: 110 t throat: 295 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram - range of adjustment: 85 mm table surface area: 920x580 mm ram surface: 540x280 mm hole in the table: 300x180 mm table height: 830 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,1 t dimensions of the machine ca.: BxTxH 1500x2000x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Non-stackable stainless steel tank manhole diameter 400 mm Event Lateral tank bottom drain with 49mm diameter butterfly valve Maximum allowable pressure:-0.15/+0.65 bar Test pressure: 1.3 bar Maximum allowed temperature:-10/+50°C, Volume: 1000 Liters, Tank bottom diameter: Diameter 72mm, Event: 49 mm, Mobile tank: No, Link to manufacturer: http://www.stocklin-logistics.fr/pein/metre-cube/

The scope of delivery includes: 01x collision guardrail, used Manufacturer. Feralco For single rack row: 1,100 mm Total height: approx. 400 mm Total depth: approx. 340 mm Total weight: approx. 20 kg | Pcs. Consisting of each: 02x rectangular tubes, used Total length: approx. 1.190/ 1.115 mm Material color: yellow Profile abm.: approx. 80 x 40 mm Material thickness: approx. 2.0 mm 02x U-collision protection corners, used Material colour: yellow/black Total height: approx. 400 mm Total depth: approx. 300 mm Total width: approx. 170 mm Internal width: approx. 152 mm Material thickness: approx. 4.0 mm 08x screws 08x nuts 16x washers

COMPRESSOR OIL FREE 90 KW ZT 110 KW ZT 7.5 BAR DRYER FD 560

Y1 / Y2 / X / R / Z1 / Z2 LVD tooling Capacity: 110 ton x 3100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 400 mm Table width: 150 mm Locking speed: 130 mm/sec Working speed: 12 mm/sec Returning speed: 115 mm/sec Electric motor (power): 20 kW Weight: 10 ton

with hydraulic plateclamp for shear Punching cap: 80 ton Dia x sheet thickness: 40 xnbsp; 15 mm / dia 60 x 10 mm Depth of throat: 510 mm Max cutting-thickness in plate: 500 x 20 mm /nbsp;400 x 19 mm Blade length: 510 mm 90°-cut corner: 120 x 120 x 13 mm 45°-cut corner: 90 x 90 x 10 mm Cut to length round: 45 mm Cut to length square: 40 mm Max material thickness by notching: 90 x 10 x 13 mm

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Year of construction: 8/99 Manufacturer: Transtechnik GmbH Condition: Used Model/Type: 110/ 600 Total length: approx. 1020 mm Total width incl. motor: approx. 780 mm Total width without motor: approx. 680 mm Belt width: approx. 600 mm Strap Type: Smooth Colour: Grey/ Green Material: Stainless steel/ Aluminum Frame height: approx. 130 mm Engine type: Drum motor Thanks to the excellent workmanship of the belt conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are your competent partner! We would be happy to provide you with an individual offer or advise  ...

SCM Swivel spindle milling machine - T110 i Product name: Swivel spindle milling machine Type: T110 i Manafacture: SCM Machine number: 071215 Year of construction: 1996 Condition: used, overhauled Technical details: - Table dimensions: 1,000 x 650 mm - Table height: 920 mm - Useful length of the milling spindle: 150 mm - Adjustment range of the milling spindle: 150 - 20 mm - Spindle diameter: 30 mm - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm - Number of rings of the table insert: 5 pieces - Diameter suction nozzle: 120 mm, 2 pieces - Foldable Aigner integral stop - FRIED chip trapping and milling protection device - VARIOFEED feeder, 3 wheels - 2 x table extension, each 1,100 mm - Weight: 430 kg - Swivel range of the milling spindle: -5° to 45° Engine data milling machine: - Power: 4 kW - Voltage: 380 V - Current: 9 A - Frequency: 50 Hz ...

NEW Perkins Diesel 45/50 kVA, Modell 1103A-33TG1, silenced Subject to changes, errors and prior sale

NEW Perkins 100/110 kVA, Diesel, silenced Subject to change, error and prior sale

NEW Perkins 136/150 kVA, Diesel, silenced Subject to change, error and prior sale

SCHMALTZ RGK 1100/6000 Crankshaft Grinding Machine Technical Details : Max.Workpiece Length :8000 mm Grinding Diameter: 1100 mm Grinding Wheel Diameter:1300 mm Grinding Motor : 25 PS Crankshaft Radius Max: 300 mm Cr8zr7tiq2 Workpiece Weight:2500 Kg Clamping Diameter: 100-250 mm Rotation Speed : 400 to 500 U/Min Workpiece Speed:10-14-20 U/min Slide Speed: 50 to 600 mm/min

Hot counter Suprema 110, with top and bottom heat, lighting, Connection 230V, 1,5kW, Dimensions LxWxH approx. 68x60x60cm, weight approx. 32kg, used, functional

Please note that from 2023 onwards, the canopies will be beige instead of blue. Also note that the specifications on the pictures might differ from the actual stock from 2023 and newer. See data sheets for the exact information.; Gross weight [kg]: 1335; Engine: John Deere 4045HSG20; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 190

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-110 Technical features: Output: up to 100 cans/minute Recommended output: 40 to 80 cans/minute (according the can type) Formats: 1 unit with format diameter 73mm (ID 2015) 1 unit with format diameter 99mm Others formats: diameter 65mm, 1/2 oval, 1/4 oval Cans height: 25-62mm

3100 x 110t.

1 machine (from below) 3 Roll grinding machine Fabr. Viet Model. VALERIA ICCC INF 1100 Year of construction: 2000 Roller 1. 21.3 kW Roller 2. 11 kW Roller 3. 11 kW Feed rate 3.7-20.3 with vacuum table 2 machine (from above) 3 rollers wide belt grinding machine Fabr. Viet Model. Challenge 331 TM Year of construction: 2000 1 roller 18.5 kW 2 roller 11kW 3 roller 11kW Working. 1100mm Feed speed.3.7 - 20.5m/min Engine. 1.5 kW with vacuum table

The scope of delivery includes: 01x Tiefensteg, used Material color: sendzimir galvanized total length: approx. 1,110 mm suitable for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: C 70 x 50 x 15 mm Truss support: approx. 50 mm Weight/ pcs.: approx. 3,02 kg

Twin-shaft shredder Drive 37.50 kW

The scope of delivery includes: 01x Tiefensteg, used Material color: sendzimir galvanized total length: approx. 1,110 mm suitable for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: C 70 x 50 x 15 mm Truss support: approx. 50 mm Weight/ pcs.: approx. 3,02 kg

The scope of delivery includes: 198x Tiefenstege, used Material color: sendzimir galvanized total length: approx. 1,110 mm suitable for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: C 70 x 50 x 15 mm Truss support: approx. 50 mm Weight/ pcs.: approx. 3,02 kg Hint: The unit price is only valid for a purchase quantity of at least 198 pieces (01x pallet)

Feed channel Jöst Dim: length 2000 mm - width 1100 mm, Drive with two vibration motors of 1.2 kW each

The scope of delivery includes: 01x Rear wall grille, used Material color: similar. beige overall width: approx. 1,200 mm total height: approx. 1,100 mm Mesh size (outer): approx. 93 x 53 mm Mesh size (inside): approx. 88 x 48 mm Frame profile dimensions: L-profile 30 x 30 mm The rear wall grilles are rusted, partially the frame profile is damaged, see pictures.

working width: 1100 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; workpiece thickness display: digital; aggregates: 2; 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller; 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller; Link grinding shoe: elastic, sector distance 56; Electronic control: FOX 500 KTR; dust brush: no; motor power: 15 kW; suction connection: 2 x 140 mm; machine length: 1650 mm; machine width: 1820 mm; machine height: 1960 mm; weight: 1170 kg; The LIBRA 35 calibration and fine grinding machine is an extremely versatile machine that can be used in differ ...

Pellet press 3-5 tons hour 2006 but very little used of the brand PTN 1100 150-300 Dutch make very very sturdy and very good condition with some spare parts, sale due to project dissolution

Secondary shredder of the brand Lindner Komet 1100 good condition little run 130 KW

WILL NOT LAST Husky Hypet 300 P100/110 E100 year 2010 working hs approx 65.000 Condition In production Availability Immediate Auxiliaries Resin dryer with hopper and Mold dehumidifer Cavities 72 Mold YES 2925 water short 12g and 13g 3025 water long/milk 13g 14.5g 15.5g 17.5g ask for info and dont delay

Wide belt grinding machine SAC RTE 1100 max. working height 170 mm min. working height 3 mm Working width 130 mm Engine 11 kW Pneum. Operating pressure 6 atm Extraction capacity 1500 m3/h Weight approx. 2000 kg incl. various sanding belts The machine is in good condition, operational. Available from May/June 2024 Subject to changes, errors and prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

travel -x axis: 1.100 mm travel -y axis: 610 mm travel -z axis: 610 mm table dimension (L x W): 1.250 x 610 mm tool adaptor: SK40 numbers of positions in the tool changer: 30 table diameter: ^250 mm Milling machining centers - vertical | MTcut - V 110 T with NC swivel rotary table (TT251HEE08) The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: #Tags: V110T | V-110 T | V-110T | V 110T | V110 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

one pass rolling and curving machine dia of upper roll (steel): 100 mm dia of under roll (rubber): 270 mm

Equipment consists out of: 1 - Three decoilers 2 - Sheetholder with three levels 3 - Fasti straightening unit 4 - Fasti shear Transversal cut to length line / Querteilanlage / installation de coupe en longueur

Board cutter - board shear Make Schimanek Model 10-110 Year 1980's Cutting length 110 cm Details Iron cast table 72 cm, front lay+small cut device, back lay

x-travel: 1100 mm y-travel: 550 mm z-travel: 550 mm control: Fanuc 0i-M Main spindle:: turning speed range - main spindle: 8000 min/-1 power capacity - main spindel: 7,5 / 11 kW tool taper: SK 40 work table:: table surface area: 1200 x 600 mm max. table load: 1200 kg Tool-Presetter:: number of toolpositions: 24 pos. feeds:: rapid traverse: 30 m/min feed: 12 m/min total power requirement: 25 kVA weight of the machine ca.: 7,5 t equipped with: - CNC control FANUC 0i-M and Manual Guide 0i - tool changer 24-fold (SK 40) - chip conveyor - 4 machine vices - ca. 48 Tools - Coolant system 4 bar - Spindle oil cooling system - Tapping without compensating chuck Control On 12.720h - runtime 1690h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 22562 Hydraulic profile and bar steel shears with notching device and hole punch Specifications: - Flat steel scissors - Flat steel - 500 x 18 mm - or: 300 x 22 mm - Profile steel shears - L- and T-irons at 90° 120 x 13 mm - at 45° 90 x 10 mm - Round steel 45 mm - Square steel 40 mm - Notcheter - With square notch for sheets up to 13 mm - Jack width / depth 65 / 85 mm - With triangular notch for sheets up to 13 mm - Notch depth 70 mm - Hole punch - Punching force approx. 80 t - Projection 510 mm - Stroke approx. 10 to 29 mm - perforates in steel up to 39 mm Ø in 16 mm - perforates in steel up to 30 mm Ø in 20 mm - Stroke rate at 20mm hole. / Scissors 30 / 20 1/min - E. contact stop - various punches + matrices - Drive 400 V / 7.5 kW - Dimensions W 900 x H 1800 x D 1800 mm - Weight approx. 2600 kg ...

The scope of delivery includes: 01x Rear wall grille, used Material color: creamy white overall width: approx. 1,100 mm total height: approx. 1,000 mm Mesh size: approx. 60 x 50 mm Frame profile abm. (width): approx. 20 x 20 mm Frame profile abm. (height): approx. 15 x 15 mm Wire thickness: approx. 3.00 mm Weight/ pcs.: approx. 3,90 kg Internal designation: RW-1

pressure: 110 t throat: 290 mm stroke: 20-124 mm no. of strokes: 60 / 90 Hub/min ram adjustment: 85 mm table surface area: ca. 920 x 590 mm ram surface: ca. 530 x 280 mm distance table to upper part of the press: ca. 450 mm hole in the table: ca. 180 x 300 mm mm table height: ca. 750 mm tool hole in ram: Ø 50 mm Number of working hours: 8214 h distance table to upper part of the press: mm weight of the machine ca.: 5,5 t dimensions: ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new ones press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 110 mm -Edition: gray cast iron -Hole spacing: 100 mm -Tip height: 70 mm -Drawing with the photos -Dimensions: 340/300/H150 mm -Weight: 18 kg