duct pipe used for sale

mandrel bending machine Tansfluid DB 628 Year of construction: year 1995 Drive power Drive power 1.5 kW Drive drive hydraulic cylinder & roller chain Pipe range bending type 4-28 mm Bending angle bending angle 190° (without tube) Bending radius bending radius 1.5 x D – 2.0 x D Nominal pressure nominal pressure 250 bar Operating pressure 3095 mm n. right. Flow rate delivery rate 4.5 l/min

Seam closer Schechtel MS Manual Length 1 m

CONTROLS   CNC controls

Max. pipe diameter: 42mm.

There are five identical machines available, an inspection is possible.

Max. bending diameter: 30mm, an inspection is possible.

Fully automatic pipe system and shaft ring system with cage welding system Manufacturer: BFS Fully automatic concrete pipe and manhole production line including cage-making machine Manufacturer: BFS

An on-site inspection is possible.

There are two pipe pasteurisers available, including storage tank, capacity: 7000l.

Without documentation.

Corrugator (without tools) suitable for pipes up to 315 mm Manufacturer: Fränkische Type: FDC 315/36V Year of construction: 2007 (never used in production) Basic technical data: Max. product diameter: 315 mm Number of mould jaws: 36 Electrics: 3 x 400V 50 Hz + N + PE Extrusion height: 1100 mm Serial No.: MV-2034 Operating hours: 450 hours / mechanical only Condition: very good, never used in production, for mechanical demonstration only.

Machine type: Kieserling seven-roll straightening machine Working range: Tubes from Ø 15 mm to Ø 75 mm Rods Ø 20 mm to Ø 65 mm Direction of passage: from right to left Speed: approx. 50 m/min Make Kieserling & Albrecht Type: WRUN 1A Location: Solingen Length 2,400 mm Width 2,000 mm Height 1,900 mm Weight 4,600 kg Country of origin: Germany

including table, Dell computer, monitor, mouse, keyboard, barcode scanner, PerkinElmer Peri Pump and 2 canisters, including USB stick with software, automated working station: approx. 170/85/95 cm

Machine type: Bronx six-roll straightener 6CR 4BW incl. saw and roller tables Working range: Tube: from Ø 15 mm to Ø 54 mm Make Bronx, similar to Kieserling, type: Bronx 6CR 4BW

Pipe notching tool, pipe notching tool -Max. Tube diameter: 60 mm -Eccentric tension -Pipe bracket: swiveling -Dimensions: 480/160/H380 mm -Weight: 28 kg

Machine type: Two-roll straightening machine Working range: from Ø 4 mm to Ø 32 mm Direction: From left to right Speed: 24m/min Make Kieserling Type WRPF 20/30 Year of construction: Refurbished in 2023

Pipe penetration DOYMA 911257/0004 Pipe diameter: Ø 48 - 50 mm Sealing kit: Outer diameter : Ø 100 mm, length 55 mm Flange 1: Diameter: Ø 100 / 220 mm, thickness: 5 mm bolt circle diameter: Ø 160 mm, 4x bore: Ø 15 mm flange 2: Diameter: Ø 60 / 240 mm, thickness: 6 mm bolt circle diameter 1: Ø 160 mm, 4x stud bolts: M12 x 1.75, length: 34 mm bolt circle diameter 2: Ø 190 mm, 2x countersunk hole: Ø 9 mm Material: steel, rubber New ! Dimensions : 240 x 240 x 110 mm

Pipe peeling device, rotary peeling device, plastic pipe cutter, plastic pipe peeler, plastic pipe welding device -Diameter: Ø 32 mm -Weight: 0.4 kg

Pipe sealing bags, leak sealing bags, sealing plates, pipe seals, shut-off rings -Pipe sealing cushions: DN1200 -Diameter: 1180 mm -Dimensions: 1180 x 500 mm -Weight: 140 kg

Pipe sealing bags, leak sealing bags, sealing plates, pipe seals, shut-off rings -Pipe sealing cushions: DN1200 -Diameter: 1200 mm -Dimensions: 1200 x 450 mm -Weight: 200 kg

Pipe sealing bags, leak sealing bags, sealing plates, pipe seals, shut-off rings -Pipe sealing cushions: DN1600 -Diameter: 1560 mm -without: rubber seal -Dimensions: 1560/H290 mm -Weight: 255 kg

Pipe freezer ROLLER, S Roller ́s Polar Application range: 20- 60 mm with plastic case and documents ! used, tested ! Dimensions ( case ): 520 x 375 x 125 mm

Corrugated pipe, black, robot version REIKU PURRB-52G PA12 Robotics nominal diameter: 70 mm Length: 7 m New ! Dimensions (packaging): 600 x 600 x 300 mm

Spiral pipe hose elbow PAGUS DN200 angle: 90° inner diameter: 200 mm elbow length:820 / 420 mm Material: rubber used, tested ! Dimensions: 700 x 300 x 230 mm

Pipe elbow 90° JACOB NW150 Article number: 11153339 DN150 Wall thickness: 1 mm Material: stainless steel New ! Dimensions: 235 x 235 x 164 mm

Corrugated pipe, plastic hose HELLERMANN TYTON HG-HI54 166-11507 Inner diameter: 47,47,2 mm outer diameter: 54.5 mm length: 25 m Material: polyamide 12 ( PA12 ) Color: black New ! Dimensions ( packaging ): 900 x 800 x 300 mm

Pipe and cable clamp, 150 pieces NIEDAX® 852 G Pipe diameter: Ø 19 - 24 mm Thread: M6 x 1.0 Material: steel, hot-dip galvanized Material thickness: 1.5 mm Other quantities on request ! New ! Dimensions ( single clamp ): 50 x 30 x 15 mm Dimensions ( packaging ): 250 x 150 x 100 mm

ALU pipe clamp, spacer clamp with slotted hole, 50 pieces NEWLEC HAAS32 item number: 2712300 Clamping range: 32 mm slotted hole: Ø 6,2 x 10 mm Material: aluminum, screws made of stainless steel Material thickness: 1.5 mm Scope of delivery: 2 individual packages with 25 spacer clamps each Other quantities on request ! New ! Dimensions ( spacer clamp ): 68 x 40 x 15 mm Dimensions ( single packaging ): 155 x 110 x 90 mm

ALU pipe clamp, spacer clamp with slotted hole, 80 pieces NEWLEC HAAS25 Article number: 2712299 Clamping range: 25 mm slotted hole: Ø 5,5 x 8 mm Material: aluminum, screws made of stainless steel Material thickness: 1.5 mm Scope of delivery: 2 individual packages with 1x 50 spacer clamps and 1x 30 spacer clamps Other quantities on request ! New ! Dimensions ( spacer clamp ): 60 x 34 x 14 mm Dimensions ( single packaging ): 220 x 110 x 90 mm

Flexible pipeline PAGUS NW 50 Flange: Ø 75 mm New ! Stainless steel ! Dimensions: 500 x 80 x 80 mm

S-jaw pipe wrench ALARM 1 1/2 11021 DIN 5234 68 mm chrome vanadium steel New ! Dimensions: 440 x 80 x 25 mm

Corner pipe wrenches set VBW 1 1/2 and 1 No. 951 and No. 115 DIN 5234 chrome vanadium steel New ! Dimensions: 440 x 80 x 25 mm

S-Maul-Rohrwren WÜRTH 1 1/2 714 06 61 DIN 5234 68 mm chrome vanadium steel New ! Dimensions: 440 x 80 x 25 mm

: 60x3 mm : 60x2,5 mm : 35 mm : 64x4 mm : R10-R300 bending speed: 2 U/min total power requirement: 1,5 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 595x363x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

complete used multilayer composite pipe extrusion line (PE-AL-PE) suitable for pipes from 10 - 32 mm Includes tools for diameter 16mm Year of construction: 2010 Condition: very good and ready for use!

Inv. Num. : 6907 Type: B/90 Producer: Curvatubi Generated:- Parameters: Tube diameter: 50-60 mm

Maximum Diameter: 20 mm

Oto Mills 127x5mm HF tube mill Make: Oto Mills (Italy) Year New: 1999 Tube Diameter: 38mm – 127mm Wall Thickness: 0.9mm – 5mm Speed: 100 meters per minute Direction: Right to Left Tooling: Round, Square, Rectangular Entry Coil Car Shear & End Welder Driven Pinch Rolls Coil Straightening Machine Pit Type Accumulator Forming Mill 250Kw Emedi High Frequency Welder 2-Roll Adjustable Welding Box Cooling Section Sizing Mill Four (4) Adjustable Turk Heads Cut – Off Type: Flying Saw Driven Exit & End Tables Electrics, Hydraulics, Controls, Lots of Tooling, Drawings & Manuals, Spare Parts Line is still installed but not operational. Possible to inspect

Maximum Diameter: 70 mm // Minimum Diameter: 20 mm

Maximum Diameter: 3000 mm // Minimum Diameter: 500 mm

Maximum Diameter: 25 mm // Minimum Diameter: 12 mm

Maximum Diameter: 500 mm // Minimum Diameter: 300 mm

Maximum Diameter: 1000 mm // Minimum Diameter: 300 mm

Maximum Diameter: 200 mm // Minimum Diameter: 100 mm

Maximum Diameter: 2000 mm // Number Of Belts: 14

machine for expanding and reducing tubes 2 heads

Pipe thread rejects mandrel, thread mandrel LMW SCHMALKALDEN R1 1/2 Thread: R1 1/2 ( inch ) Outer diameter: Ø 47 mm mandrel length: 20 mm Total length: 114 mm used, tested ! Dimensions ( packaging ): 120 x 50 x 50 mm

machine for expanding and reducing tubes 1 head no tooling included (can be supplied on demand) Dimensions: 2200 x 800 x 1200 mm Weight: 500 kg

Pipe thread Gut-mandrel, thread mandrel LMW SCHMALKALDEN R1 1/2 Thread: R1 1/2 ( inch ) Outer diameter: Ø 48 mm mandrel length: 25 mm Total length: 119 mm used, tested ! Dimensions ( packaging ): 125 x 50 x 50 mm

machine for expanding and reducing tubes 13 head no tooling included (can be supplied on demand) Stroke: 150 mm Power: 11 kW Dimensions: 2200 x 800 x 1200 mm Weight: 500 kg