dry screw used for sale

Pressure: 16 bar Motor: 0,04 kW Free air delivery: 15,67 m³/min Measurement (WxHxD): 1500 x 2020 x 670 Weight: 698 kg Compressed air connection: 2 1/2

Pressure: 16 bar Motor: 0,14 kW Free air delivery: 0,4 m³/min Measurement (WxHxD): 307 x 600 x 443 Weight: 24 kg Compressed air connection: 1/2

Pressure: 16 bar Motor: 0,46 kW Free air delivery: 5,2 m³/min Measurement (WxHxD): 400 x 795 x 673 Weight: 53 kg Compressed air connection: 1 1/2

Pressure: 16 bar Motor: 0,46 kW Free air delivery: 5,2 m³/min Measurement (WxHxD): 400 x 795 x 673 Weight: 53 kg Compressed air connection: 1 1/2

Pressure: 16 bar Motor: 0,36 kW Free air delivery: 0,83 m³/min Compressed air connection: 1/2

Pressure: 16 bar Motor: 0,3 kW Free air delivery: 1,4 m³/min Measurement (WxHxD): 350 x 490 x 450 Weight: 27 kg Compressed air connection: 1

Pressure: 16 bar Motor: 0,15 kW Free air delivery: 1,4 m³/min Measurement (WxHxD): 337 x 665 x 593 Weight: 35 kg Compressed air connection: 3/4

Pressure: 14 bar Motor: 1,37 kW Free air delivery: 11 m³/min

Pressure: 16 bar Motor: 0,14 kW Free air delivery: 0,4 m³/min Measurement (WxHxD): 307 x 600 x 443 Weight: 24 kg Compressed air connection: 1/2

Pressure: 50 bar Motor: 0,84 kW Free air delivery: 7,5 m³/min Measurement (WxHxD): 550 x 880 x 610 Weight: 101 kg Compressed air connection: 1

Pressure: 14 bar Free air delivery: 1,97 m³/min Weight: 35 kg

Pressure: 50 bar Free air delivery: 4,07 m³/min Measurement (WxHxD): 786 x 1715 x 460 Weight: 113 kg Compressed air connection: 3/4

Belt dryer for bark/ chips/ wood chips Dryer input capacity: 11.25 t/h Dryer output capacity: 6.25 t/h Water evaporation: 5 t/h Inlet moisture: 50% water content Initial moisture: approx. 10 % water content Electrical connected load: total approx. 182 kW Product bulk density: approx. 260 kg/m³ (wet) Fresh air parameters: temp. 10°C, 60% relative humidity Type of water-air heat exchanger: Indirect finned tube Heating medium: water-glycol mixture (120°C/ 65°C) Nominal heat output: 5800 kWh/h at +10°C outside air temperature 7000 kWh/h at -10°C outside air temperature Drying temperature: approx. 110°C

Description Max operating pressure: 14 Bar Power: 1,415 Kw Gas type: R410A

Description Max operating pressure: 16 Bar Power: 1.27 Kw Gas type: R134a Gas weight: 0.400 Kg

Description Double tower dehumidifier hopper capacity: 300 dm3 air flow: 100 m3/h temperature range: 70°-150° C power supply: 400V power 8.6 kW new hopper air return pipe New hopper air return filter

Description hopper capacity: 50 dm3 air flow: 30 m3/h temperature range: 50°-140° C charger capacity: 5 dm3 power supply: 220V heater power: 1.5 Kw Charger power: 1 Kw

Used batch fluid bed dryer made by GLATT, model: WSG-C 60 made of stainless steel with spray granulation. 1100 kg/day capacity 40 kW power installed Max. air capacity 6000 m3/h Max. Static pressure 12000 Pa New 1995. The device equipped with: - air filter - fan - control cabinet - piping - tun removable - full documentation - CE. EX.

Description hopper capacity: 50 dm3 air flow: 30 m3/h temperature range: 50°-140° C charger capacity: 5 dm3 power supply: 220V heater power: 1.5 Kw Charger power: 1 Kw

Description hopper capacity: 30 dm3 air flow: 20 m3/h temperature range: max 140° C tubo diffusore aria calda removibile per migliore pulizia con magnete incorporato

Description hopper capacity: 30 dm3 air flow: 20 m3/h temperature range: max 140° C

Bouwman Pharma Plant Isolator with freeze-drying system Isolators are the safest method to ensure sterile conditions. In insulators, an evaporator in conjunction with a distribution system takes over the automated decontamination. Year of construction 1991 Weighing System - Weighing Range: 20-6000 gr Abm. Inside: ± W160 x D150 x H110 cm Item condition: used

Description Moretto heater group composed of: Heater: Moretto EH 3A Temperature range: 50 - 140 °C Power: 3,5 kW Voltage: 400 V Aspirator: Moretto F5F40 Capacity: 5 L Power: 1 kW Voltage: 230 V Hopper: Moretto TC150P Capacity: 150 L Pedestal: Moretto Frame

Description Moretto heater group composed of: Heater: Moretto EH 2A Temperature range: 50 - 140 °C Power: 2.8 kW Voltage: 230 V Hopper: Moretto TC100V Capacity: 100 L Pedestal: Moretto Frame

Description Moretto double tower wheeled dehumidifier hopper capacity: 60 dm3 air flow: 50 m3/h temperature range: 50°-150° C

Description Single tower dehumidifier hopper capacity: 100 dm3 air flow: 70 m3/h temperature range: 50-150 C

Stock # U2352-4 Used stainless steel lab size mobile fluid bed dryer by Glatt model GPCG-1. Working volume of drying chamber up to 4.5 l. Operating pressure 0.79 bar. Machine is equipped with two stainless steel cones - one for coating process, second for drying. Coating cone is also equipped with 4 stainless steel screens. Nozzle not included. Electric power supply for heating 4 kW. Working temperature range from 10 up to 140 C. Dryer is equipped with centrifugal fan driven by el. motor 2.2 kW, 2850 rpm, 220-230/380-400 V, 50 hz. Compressed air - pressure 6 bar.

Description DEGA Dehumidification System with 2 Receivers controlled by a Blower Heating power: 9 Kw Blower power: 2.2 Kw Total installed power: 18 Kw Refined air flow: 250 m3/h Maximum Process Temperature: 150 °C Hopper capacity: Approximately 650 litres

Description Moretto heater/dryer group composed of: Moretto three-phase aspirator: V2 D40 Moretto container: C101 R42 Moretto hopper: TC 75 Moretto heater: HG 3 T50 Moretto container: C51 R42 Hopper: TC 50 Moretto heater: HG 2

Description hopper capacity: 900 dm3 fans power: 2 x 0.5 kW temperature range: 50 - 140 C heating power: 18 kW

Description hopper capacity: 100 lt air flow: 90/20 m3 / h temperature range: 50-150 C absorbed power: 6.2 Kw power supply: 400 V

Description hopper capacity: 30 Lt temperature range: 0 ° -140 ° C power: 3 Kw 400 V power supply

Dry Cooler Model: MVL8020C4DM D P2,1 EC QE RE SW OS HY SA Cooling capacity actual value kW 684.40 Air flow rate m³/h 430200,00 Maximum Air Temperature Spray System / °C / % 35.0 / 50.0 Air temperature (dry/wet transition) H °C / % 28.2 / 84.6 Air outlet temperature / RH °C / % 33.0 / 64.5 Refrigerant ETHYLENE glycol 35% Inlet temperature refrigerant °C 40.0 Actual value outlet temperature refrigerant °C 30.2 Pressure drops kPa 25.0 Volume flow m³/h 65.94 Mass flow kg/h 68462 Refrigerant speed m/s 0.67 Fan Data Fan 20 Diameter fan wheel mm Ø 800 Speed/Max rpm 950/950 Power consumption / unit W 1584 Total power consumption W 31680 Current consumption x 1 A (b) 2.5 Total current consumption A 50 Sound power level dB(A) 90 Sound pressure dB(A) 57 At a distance of m 10 Percentage Operation % 100 Operating voltage V/ph/Hz 400/3/50 Tria ...

Description hopper capacity: 100 dm3 air flow: 50 m3/h temperature range: 50-150 C Moretto F5 F40 magazine 220 V power supply Power: 1Kw with Moretto VP40E proportional valve

USED STAINLESS STEEL SPROUT-WALDRON 10 DRYER REF.: C6846 General characteristics: Manufactured by SPROUT-WALDRON Model 10 Material Stainless steel Weight 510 kg Motor characteristics: Rotational speed 910 rpm

Output: 20t/h, with Burner Weishaupt WM-GL 20 3-A, fuel: oil, natural gas, year of construction: 2018, various elements were renewed in 2018.

Without accessories, spare parts and documentation, was maintained regularly, was running one-shift.

For melting and curing powder-coated parts, as well as drying and baking painted parts, max. charge weight: 500kg, operating temperature: 100-320°C, calorific value: 10kWh/m³, heating capacity: 90kW, internal dimensions: 2500x1200x1850mm, volume: 5.55m³, connected load: 8.075kW, length: 3800mm, width: 2700mm, height: 3100mm, with instruction manual, without spare parts or accessories.

Inner dimensions: 2100x1200x1800mm, temperature: 30-300°C, heating power: 45kW, motor power: 3kW, length: 2750mm, width: 1900mm, height: 2600mm, with documentation, can be opened from both sides, an inspection is possible.

Two identical drying ovens are available, max. temperature: 300°C, external dimensions: 827x895x816mm, internal dimensions: 503x554x644mm, weight: 100kg, on-site inspection is possible.

An electric drying oven. Operating temperature: 50°C-250°C, usable space: 2.6m³, heating connection values: 18kW, motors: 0.74kW. On-site inspection is possible.

Feed rate: 5-25m/min.

inlet wire diameter 6,5 mm finished wire diamter 1,6 mm number of drafts 8 diameter of capstan 550 mm and 650 mm speed -meters/sek 8-12

System consists of four CTT 300 and three TT 100, capacity: 4x 200/ 3x 100l, connected load: 1.6kW.

Hopper capacity: 600l, connected load: 17kW, length: 820mm, width: 820mm, height: 2455mm, weight: 490kg.

Circumferential speed: 80m/s, an on-site inspection is possible.

A WUMAG TEXROLL cylinder dryer for drying and stretching. Drums: 6 pieces, drum diameter: 560mm, TÜV-tested. Roller width: 3000mm, fabric width: 2800mm. Heating: Steam-heated. Including: Tidland braking system, Montalvo tension measurement, hydraulic outlet tension system.