We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,574 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Pressure: 50 bar Free air delivery: 4,07 m³/min Measurement (WxHxD): 786 x 1715 x 460 Weight: 113 kg Compressed air connection: 3/4
used
LU-VE SAL8S 2272 A Brand:LU-VE Type:SAL8S 2272 A Stock number:M22-3315 Cooling capacity:806 kW Number of fans:14 Refrigerant:Water / Glycol Refrigerant Content:323 kg Voltage:400 Volts Motor power:14x 1,85 kW Dimensions:6890 x 2384 x 1600 mm Weight:2,280 kg Year:2018 Number in stock:2 piece(s) Price:Quotation request Description: Very nice and young Lu-Ve dry cooler with 14 EC fans. The speed of the fans is controlled by the EVCO controller. Mentioned capacity at 15K. Visit also our website: used-refrigeration
used
Belt dryer for bark/ chips/ wood chips Dryer input capacity: 11.25 t/h Dryer output capacity: 6.25 t/h Water evaporation: 5 t/h Inlet moisture: 50% water content Initial moisture: approx. 10 % water content Electrical connected load: total approx. 182 kW Product bulk density: approx. 260 kg/m³ (wet) Fresh air parameters: temp. 10°C, 60% relative humidity Type of water-air heat exchanger: Indirect finned tube Heating medium: water-glycol mixture (120°C/ 65°C) Nominal heat output: 5800 kWh/h at +10°C outside air temperature 7000 kWh/h at -10°C outside air temperature Drying temperature: approx. 110°C
used
Description Max operating pressure: 14 Bar Power: 1,415 Kw Gas type: R410A
used
Description Max operating pressure: 16 Bar Power: 1.27 Kw Gas type: R134a Gas weight: 0.400 Kg
used
Machine name: Dry goods doser Manufacturer: K-Tron / Coperion GmbH Type: K-ML-FB-130QC Year of construction: Unknown Speed: Mixer Speed: 5.6rpm Content: 75 litres Drive motor: 0.25 kW. - Mixer drive 0.25 kW Dimensions: length 800 mm x width 700mm x height 1200mm Empty weight: 100 kg Tech. Documentation: No Remark: mixed drive 0.25 kW, speed 5.6 rpm Condition: Used Price: On request
used
Description Double tower dehumidifier hopper capacity: 300 dm3 air flow: 100 m3/h temperature range: 70°-150° C power supply: 400V power 8.6 kW new hopper air return pipe New hopper air return filter
used
Stock no.: 503260 Machine/ Device Type: Dry Air Dryer Manufacturer: Anvil+Longleg Type: Sectional dryer H150 Year of construction: 2011 Sectional dryer H 150 with 8 sectional boilers à 100 l Tank capacity: 8 x 100 L Air flow: 400 m³/h The sectional dryers from Amboss+Langbein can be used for energy-saving, stationary and mobile drying. Thanks to the modular system from Amboss+Langbein, the dryer system adapts individually to the operational requirements and can be realized in the smallest space. The dryers work dew point controlled and with an energy-saving heat exchanger. Depending on the production requirements, the air flow rate is regulated between 140 and 400 m³/h by process control. Each dryer boiler has an individual temperature control. A separate scanning of the dry goods prevents overdrying and insufficient Drying due to excessive material removal. ...
used
The system has an explosion protection EEx dIIA/IIB-T4 Machine name: Filter dryer / filter pressure groove Manufacturer: Rosemund Type: RLF02-648-91 Year of construction: 1991 Material: Container, heater and stirrer: 1.4435 operating pressure: Container: - 1 / 6 bar heating jacket: - 1 / 6 bar operating temperature: Container: - 50 / +150 °C. Heating jacket: - 50 / +150 °C. Dimensions: length 1650 x width 1170 x height 2400 mm Empty weight: Approx. 2000 kg Tech. Documentation: Yes Remark: Drive hydraulics: 5.5 kW Electric motor: power 5.5, speed 1500 rpm, type V1, protection class IP55 Explosion protection: EEx dIIA/IIB-T4 Accessories: A base frame and a hydraulic system Condition: Used good Price: On request
used
Description hopper capacity: 50 dm3 air flow: 30 m3/h temperature range: 50°-140° C charger capacity: 5 dm3 power supply: 220V heater power: 1.5 Kw Charger power: 1 Kw
used
Description hopper capacity: 50 dm3 air flow: 30 m3/h temperature range: 50°-140° C charger capacity: 5 dm3 power supply: 220V heater power: 1.5 Kw Charger power: 1 Kw
used
Description hopper capacity: 30 dm3 air flow: 20 m3/h temperature range: max 140° C tubo diffusore aria calda removibile per migliore pulizia con magnete incorporato
used
Description hopper capacity: 30 dm3 air flow: 20 m3/h temperature range: max 140° C
used
Description Moretto heater group composed of: Heater: Moretto EH 3A Temperature range: 50 - 140 °C Power: 3,5 kW Voltage: 400 V Aspirator: Moretto F5F40 Capacity: 5 L Power: 1 kW Voltage: 230 V Hopper: Moretto TC150P Capacity: 150 L Pedestal: Moretto Frame
used
Description Moretto heater group composed of: Heater: Moretto EH 2A Temperature range: 50 - 140 °C Power: 2.8 kW Voltage: 230 V Hopper: Moretto TC100V Capacity: 100 L Pedestal: Moretto Frame
used
Description Moretto double tower wheeled dehumidifier hopper capacity: 60 dm3 air flow: 50 m3/h temperature range: 50°-150° C
used
Description Single tower dehumidifier hopper capacity: 100 dm3 air flow: 70 m3/h temperature range: 50-150 C
used
Description DEGA Dehumidification System with 2 Receivers controlled by a Blower Heating power: 9 Kw Blower power: 2.2 Kw Total installed power: 18 Kw Refined air flow: 250 m3/h Maximum Process Temperature: 150 °C Hopper capacity: Approximately 650 litres
used
Description Moretto heater/dryer group composed of: Moretto three-phase aspirator: V2 D40 Moretto container: C101 R42 Moretto hopper: TC 75 Moretto heater: HG 3 T50 Moretto container: C51 R42 Hopper: TC 50 Moretto heater: HG 2
used
Description hopper capacity: 900 dm3 fans power: 2 x 0.5 kW temperature range: 50 - 140 C heating power: 18 kW
used
Description hopper capacity: 100 lt air flow: 90/20 m3 / h temperature range: 50-150 C absorbed power: 6.2 Kw power supply: 400 V
used
Description hopper capacity: 30 Lt temperature range: 0 ° -140 ° C power: 3 Kw 400 V power supply
used
used
Demo model
used
Without accessories, spare parts and documentation, was maintained regularly, was running one-shift.
used
Inner dimensions: 2100x1200x1800mm, temperature: 30-300°C, heating power: 45kW, motor power: 3kW, length: 2750mm, width: 1900mm, height: 2600mm, with documentation, can be opened from both sides, an inspection is possible.
used
For melting and curing powder-coated parts, as well as drying and baking painted parts, max. charge weight: 500kg, operating temperature: 100-320°C, calorific value: 10kWh/m³, heating capacity: 90kW, internal dimensions: 2500x1200x1850mm, volume: 5.55m³, connected load: 8.075kW, length: 3800mm, width: 2700mm, height: 3100mm, with instruction manual, without spare parts or accessories.
used
Output: 20t/h, with Burner Weishaupt WM-GL 20 3-A, fuel: oil, natural gas, year of construction: 2018, various elements were renewed in 2018.
used
Two identical drying ovens are available, max. temperature: 300°C, external dimensions: 827x895x816mm, internal dimensions: 503x554x644mm, weight: 100kg, on-site inspection is possible.
used
An electric drying oven. Operating temperature: 50°C-250°C, usable space: 2.6m³, heating connection values: 18kW, motors: 0.74kW. On-site inspection is possible.
used
Feed rate: 5-25m/min.
used
System consists of four CTT 300 and three TT 100, capacity: 4x 200/ 3x 100l, connected load: 1.6kW.
used
Hopper capacity: 600l, connected load: 17kW, length: 820mm, width: 820mm, height: 2455mm, weight: 490kg.
new
Centrifuge New brand: GESTER, model: CG-1200V. Shaft length: 1.2 m and axis diameter: 0.5 cm. Engine: 50 hp at 3000 rpm. Pneumatic piston for cleaning on top. Electrical panel with triangle star.
used
Circumferential speed: 80m/s, an on-site inspection is possible.
used
A WUMAG TEXROLL cylinder dryer for drying and stretching. Drums: 6 pieces, drum diameter: 560mm, TÜV-tested. Roller width: 3000mm, fabric width: 2800mm. Heating: Steam-heated. Including: Tidland braking system, Montalvo tension measurement, hydraulic outlet tension system.
used
Squeezer Engine: 172 Kw. With electrical panel.
used
Max. working pressure: 16bar, ambient temperature: 3-50°C.
used
Air pressure: 0.1-1.2Mpa, air pressure: 60°C, weight: 450kg.
used
Operational pressure: 16bar, Leistung: 5,7kW.
used
There are two Adsorption Dryer MD 200 available, year of construction machine 1/ 2: 2017/ 1998.
used
Volume flow: 470m³/h, operational overpressure: 7-16bar, coolant: 407c, connected load: 1.48kW.
used
Volume flow: 186m³/h, temperature: -10 to 120°C.
used
Coolant: R 22, charge: 2.5t, operational pressure: 13bar, was maintained by the manufacturer.
used
Volume flow: 21.6m³/min, operating overpressure: 7bar, length: 1100mm, width: 1028mm, height: 1829mm, weight: 1.275t, with documentation, an on-site inspection is possible.
used
Operational pressure: 43bar, connected load: 2.1kW, weight: 185kg, was maintained regularly, an inspection is possible.
used
- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1.300 mm - Working height ~ 900 + - 20 mm - Max. part height ~ 100 mm - Cooling dryer 2.000 mm - Roller transportsystem - Roller diameter 60 mm - Roller pitch 100 mm - Length conveyor 3.000 mm - Length 3.000 mm - Colour 7035 - Location, in stock - Voltage fluctuation max. +/- 5 % - Without switch cabinet
used
There are two identical drying cabinets available, nominal temperature: 200°C, power: 2000W.
used
Length: 1750mm, width: 1675mm, with documentation.
used
Max. power: 4000W, max. compressed air supply: 6ar, with Conveying System APS/ALS and Chiller Hyfra LWK 31/1-S.