We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,899 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
spindle diameter: 100 mm x-travel: 1250 mm y-travel: 900 mm z-travel: 1000 mm w-axis: 630 mm table load: 3 t Table dimensions: 1000x1120 mm voltage: 380 V taper ISO: 50 P.D.B. control: Heidenhain TNC 135 total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 130 mm x-travel: 2000 mm y-travel: 1400 mm z-travel: 1400 mm spindle taper ISO: 50 table surface area: 1000x800 mm table load: 12 t number of spindle speeds: 8-1650 U/min digital readout: total power requirement: 12 kW weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 115 mm x-travel: 2000 mm y-travel: 2000 mm z-travel: 2000 mm Table dimensions: 1600x1800 mm taper ISO: 50 total power requirement: 13/19 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1200 mm z-travel: 1500 mm w-axis: 700 mm Table dimensions: 1250x1400 mm number of spindle speeds: 8-1600 Control: Heidenhain TNC 131 total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1210 mm z-axis: 1475 mm spindle travel: 710 mm B-axis (table): 360 ° Table dimensions: 1250x1400 mm Table load: 3500 kg T-slots: 22H7 T-slot - distance: 125 mm spindle turning speed range: 4-1600 U/min spindle drive: 16,5 kW Control: total power requirement: 47 kW weight of the machine ca.: 9,25 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 500 mm y-travel: 360 mm z-travel: 400 mm Control: Siemens 810 tool taper: SK 40 table surface area: 800x390 mm T-slot - width: 14H7 mm number of T-slots: 6 T-slot - distance: 63 mm turning speeds: 20-4000 U/min transmission ratio: 4 Feed: 1-2000 mm/min rapid traverse: 5 m/min total power requirement: 9 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,5x2,9x1,9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 2000 mm y-travel: 1600 mm z-travel: 1000 mm module: Siemens 850M mm w-axis: 600 mm b-axis: 360 ° spindle taper ISO: 50 Torque: 2350 Nm output: 40 kw spindle turning speed range: 28-2800 U/min : max 7 bar Feed: 1-3000 mm/min b-axis: 2,7 U/min size of pallet: 1500x1500 mm table load: 8 t T-slots: 22H7x 22 mm Tief flute distance: 200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 150 mm x-travel: 2005 mm y-travel: 1860 mm z-axis: 1620 mm w-axis: 706 mm control: Siemens 840 C SW5.1 turning speeds: 2500 U/min surface area: 2500 x 2000 mm spindle taper ISO: 50 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m SK50 tool holder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 90 mm x-travel: 1250 mm y-travel: 1200 mm Table dimensions: 1000 x 1120 mm w-axis: 700 mm tool adaptor: ISO 40 spindle turning speed range: 28 - 1400(x18) U/min z-travel: 1600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 90 mm x-travel: 1250 mm y-travel: 1120 mm z-travel: 1400 mm w-axis: 710 mm spindle turning speed range: 28 - 1400(x18) U/min tool adaptor: MT 5 Table dimensions: 1000 x 1120 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Facing head, 3 axis digital read out, spindle support and tailstock. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 125 mm x-travel: 2800 mm y-travel: 2000 mm z-travel: 2500 mm number of spindle speeds: 3,55 - 710 (27x) taper ISO: 50 voltage: 400 V total power requirement: 18,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 102 mm x-travel: 1600 mm y-travel: 1000 mm z-travel: 1600 mm Control: Heidenhain type: TNC 410 table surface area: 1000x1120 mm Table load: 3000 kg spindle stroke: 710 mm spindle turning speed range: 4-1600 U/min main drive motor: 13 kW total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 132 mm x-travel: 2000 mm y-travel: 1350 mm z-travel: 2340 mm table surface area: 2000x1500 mm spindle stroke: 1000 mm turning speeds: 3,5-1000 U/min Radial face slide: 600 mm Radial face slide: 3,5-100 U/min Feed: 2250 mm/min spindle taper ISO: 50 Table load: 15000 kg total power requirement: kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 6,3x5x3,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 150 mm x-travel: 2500 mm y-travel: 1600 mm z-travel: 1000 mm spindle taper ISO: 50 turning speeds: 4-1120 U/min Feed: 5-2000 mm/min bore spindle stroke: 580 mm main drive motor: 45 kW table surface area: 1600x2000 mm table load: 12,5 t Control: Heidenhain type: TNC 410 Angle head: chip conveyor: workpiece weight: 15000 kg total power requirement: 80 kW weight of the machine ca.: t dimensions of the machine ca.: 6,5x5x5x4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1700 mm Control: Fanuc spindle taper ISO: 50 z-travel: 1400 mm Table area: 1250x1500 mm Table load: 5000 kg spindle turning speed range: 35-3000 U/min Tool changer: 60 chip conveyor: covers for slideway: total power requirement: 18,5 / 22 kW weight of the machine ca.: . t dimensions of the machine ca.: 1250 x 1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 130 mm x-travel: 1800 mm y-travel: 1500 mm z-travel: 1700 mm w-axis: 915 mm Table dimensions: 1219x1245 mm table load: 5 t/ 9 t t number of spindle speeds: 5-1500 Control: G+L 8000A clamping table: 2 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 boring of olive 1=yes, 0=no: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 80 mm x-travel: 1100 mm y-travel: 750 mm z-travel: 1350 mm surface area: 1000 x 1000 mm total power requirement: 6 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 5x3x3 m • 3-axis-D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Bore diameter: , mm Number of heads horizontal: , St. Number of heads vertical: , St. SPINAMATIC mod. GLF-HP Dübeleintreibgerät mit Leimangabe für Fensterfertigung ---------------------------------------------------------------- komplett wie folgt : - Fahrbare Ausführung - Dübelzuführung zur Pistole wird durch SPS-Steuerung gesteuert. - 1 Wendelförderer zur Aufnahme von Dübeln mit 1 Zuführung - Leimanlage ist mit Hoch-Druckpumpe 10:1 und Sonderleimspritzdüse für Dickleim (Typ D3 oder D4-Einkomponent) augerüstet - pneumatische Pistole für Dickleim- und Dübeleinsetzen mit Ausrüstungen für nur einen Dübeldurchmesser nach Wahl zwischen : 6 - 8 – 10 oder 12 mm. Dübellänge : min. 25 mm. – max. 60 mm. Tiefeinsetzen = 30 mm. Der Leim wird durch eine Sonderleimspritzdüse, die mit SPS-Steuerung für elektronische Dosierung in Verbindung ist, gespritzt . - Flexibler Arm mit ...
new
Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
Bore diameter: variabel mm Number of heads horizontal: 1 St. Number of heads vertical: 0 St. 1 Götzinger Dübelleim- und Einpressmaschine BLE Grundgestell in stabiler Schweisskonstruktion, mit Blech verkleidet Tischauflage ca. 200 x 1160 mm Pos. 1 1 Leimstation Vollstrahlventil Leimmenge exakt einstellbar Leimpistole für Gegenlochbeleimung Pos. 2 1 Leimpumpe aus Edelstahl, Hochdruckpumpe und Leimschlauch Pos. 3 1 Einpressstation mit Dübelvereinzelung und Einpresszylinder Pos. 4 1 Schwingförderer für Dübel d 8 x 60 mm mit Zuführschlauch in das Einpressaggregat Pos. 5 1 Bearbeitungsaggregat mit Kreuztisch, Linearführung und 3-Achs-Motore X = 200 mm Bearbeitungsbreite Y = 120 mm Bearbeitungshöhe Pos. 6 1 Positioniersteuerung Touchpanel Wahlschalter für verschiedene Bearbeitungen: nur bohren nur leimen - einpressen bohren - leimen - einpressen Preis der Pos. 1 bis einsc ...
new
bore capacity in steel (diameter): 32 mm throat: 257 mm bore stroke: 115 mm boring spindle: MK 4 boring chuck: 16 mm bore depth: 120 mm table surface area: 475 x 425 mm column diameter: 92 mm total power requirement: 1,1 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 0,75 x 0,85 x 1,72 m Sturdy bench drill with - Keyless chuck - Drilling depth setting - emergency stop - Rotatable table top The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 40 mm throat: 370 mm bore stroke: 200 mm spindle taper MT: 4 MK table:: 580 x 460 mm column diameter: 160 mm turning speeds: 75 - 2020 U/min feeds: 0,1 - 0,2 - 0,3 - 0,4 mm/U total power requirement: 1,5 kW weight of the machine ca.: 700 kg. range L-W-H: 1,1 x 0,6 x 2,35 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 520 mm : 230 mm table surface area: 730 x 210 mm connected load frequency: 400 V total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,1 x 0,9 x 1,15 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 180 mm spindle taper MT: 4 MK table:: 560 x 560 mm column diameter: 140 mm turning speeds: 50 - 1450 U/min feeds: 0,1 - 0,2 mm/U total power requirement: 1,5 kW weight of the machine ca.: 580 kg range L-W-H: 2,27 x 0,7 x 1,1 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 25 mm throat: 185 mm bore stroke: 50 mm spindle taper: MK 3 spindle turning speed range: 50 - 2500 U/min : 178 mm : 480 mm table surface area: 700 x 180 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 160 t dimensions of the machine ca.: 0,75 x 0,8 x 0,9 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 50 mm throat: 360 mm bore stroke: 150 mm spindle turning speed range: 120 - 3000 U/min spindle taper: SK 40 : 650 mm : 320 mm vertical adjustment: 500 mm table surface area: 1000 x 300 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 2,2 kW weight of the machine ca.: 0,85 t dimensions of the machine ca.: 1,25 x 1.5 x 2,3 m New Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs. Domestic equipments: • automatic feed in X-axis • 3-axis digital display • motorized Z-axis • Feed in quill • Left-right-run high • tapping attachment • Gear head swiveling • Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 16 mm throat: 170 mm bore stroke: 50 mm : 16 mm spindle taper: MK2 spindle turning speed range: 50 - 2250 U/min : 320 mm : 145 mm table surface area: 500 x 140 mm connected load frequency: 230 V total power requirement: 0,5 kW weight of the machine ca.: 90 Kg dimensions of the machine ca.: 0,5 x 0,45 x 0,84 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 50 mm bore capacity in cast iron (diameter): 60 mm threading cutting capacity:: M36 throat: 400 mm bore stroke: 230 mm spindle taper: MK 4 feed range - spindle: 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range: 54 - 1032 U/min transmission ratio: 12 Stufen column diameter: 200 mm table surface area: 550 x 550 mm total power requirement: 3,0 kW weight of the machine ca.: 0,72 t dimensions of the machine ca.: 0,6 x 1,2 x 2,6 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-a ...
new
bore capacity in steel: 40 mm threading cutting capacity:: M30 throat: 310 mm bore stroke: 175 mm spindle taper: MK 4 feed range - spindle: 20 - 400 mm/U spindle turning speed range: 60 - 1250 / 120 -2500 U/min transmission ratio: 2 Stufen column diameter: 120 mm table surface area: 550 x 400 mm total power requirement: 1,5 / 3,0 kW weight of the machine ca.: 0,45 t dimensions of the machine ca.: 0,7 x 1,4 x 2,0 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE m ...
new
bore capacity in steel: 30 mm threading cutting capacity:: M20 throat: 260 mm bore stroke: 125 mm spindle taper: MK 3 feed range - spindle: 0 mm/U spindle turning speed range: 80 - 1440 / 180 -3200 U/min transmission ratio: 2 Stufen column diameter: 110 mm table surface area: 500 x 365 mm total power requirement: 0,8 / 1,4 kW weight of the machine ca.: 0,27 t dimensions of the machine ca.: 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark T ...
new
bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 120 mm spindle taper MT: 4 MK table:: 500 x 460 mm column diameter: 115 mm turning speeds: 75- 3200 U/min feeds: 0,1 - 0,18 - 0,26 mm/U total power requirement: 1,5 kW weight of the machine ca.: 350 kg range L-W-H: 2,2 x 0,8 x 0,7 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Column drilling machine ALZMETALL type AB 4 SV Masch. No. 14805 Year of construction approx. 1980 Drilling capacity 40 mm Spindle mount MK 4 - short quill Projection 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole switchable Mains connection 380 volts, 50 Hz spindle speed via 2 gear stages and infinitely variable via variator gear - Counter stage for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/U - Table height adjustment via hand crank - Machine foot with machined workpiece contact surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition; used
new
bore capacity in steel (diameter): 60 mm bore capacity in cast iron (diameter): 70 mm threading cutting capacity:: M50 throat: 420 mm bore stroke: 260 mm spindle taper: MK 5 feed range - spindle: 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range: 64 - 1210 U/min transmission ratio: 12 Stufen column diameter: 220 mm table surface area: 600 x 600 mm total power requirement: 4 kW weight of the machine ca.: 0,82 t dimensions of the machine ca.: 0,7 x 1,2 x 2,7 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adj ...
new
bore capacity in steel (diameter): 40,0 mm throat: 320 mm bore stroke: 160 mm morse taper: 4 MK table:: 500 x 420 mm turning speeds: 90 - 1455 U/min total power requirement: 1,0 / 1,5 kW weight of the machine ca.: 450 kg. range L-W-H: 500 x 930 x 1870 mm characteristics - Vario drive for precise setting of the speed - Quill infeed either by hand or by mechanical feed - Easy tool change thanks to automatic tool ejector - Set speed can be read quickly and easily using the digital display - Solid, swiveling gray cast iron table with T-slots and coolant channel - The coolant system and lighting are included in the scope of delivery - Adjustable drilling depth stop, drilling depth can be read off using a scale - Right-left rotation device for thread cutting scope of delivery - Drill chuck arbor MK 4 / B 16 - coolant device - Digital speed display - Keyless chuck 1 - 16 mm / B 16 - Reducing sl ...
new
bore capacity in steel (diameter): 13,0 mm x-travel: 300 mm y-travel: 130 mm turning speeds: 100 - 2500 U/min throat: 165 mm spindle taper MT: 3 MK table-size: 490 x 120 mm diameter of hob: 30,0 mm motor: 230 Volt total power requirement: 0,75 kW weight of the machine ca.: 50 kg. dimensions of the machine ca.: 520x500x740 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
threading: 30 M bore capacity in steel (diameter): 40,0 mm workpiece height max.: 380 - 785 mm arm length: 985 mm spindle taper: 4 MK boring head swiweling right/left: -80 / +80 Grad turning speeds: 50 - 2000 U/min table surface area: 1210 x 520 mm column diameter: 220 mm column diameter: 220 mm table surface area: 1.210 x 520 mm quill stroke: 200 mm feed range - spindle: 0,08 - 0,5 mm/U total power requirement: 2,2 kW weight of the machine ca.: 2.800 kg. dimensions of the machine ca.: 2,45 x 1,2 x 2,72 m characteristics - A variety of clamping and machining options thanks to the construction-related construction - Electromotive height adjustment of the drill head without adjusting the Drilling position, ideal for deep hole drilling - Drill head can be swiveled 180 °, boom can be moved back and forth and horizontally pivotable - Thread cutting device and 6 automatic drilling feeds in th ...
new
bore capacity in steel (diameter): 32,0 mm throat: 255 mm bore stroke: 120 mm morse taper: 4 MK table:: 385 x 335 mm turning speeds: 80 - 2130 U/min total power requirement: 1,1 / 2,2 kW weight: 125 kg range L-W-H: 460 x 900 x 1730 mm Furnishing: - Surface-machined work table - Height adjustable via rack and hand crank - Ground base plate with T-slots for clamping high workpieces - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill - Powerful 2-stage motor, speed range from 80 - 2130 rpm - Direction of rotation switch for clockwise and counterclockwise rotation included in the scope of delivery - Cross line laser device for comfortable work - Compact, stable cast iron construction in a modern design - Stable and polished steel column, designed for heavy use Scope of delivery: - Drill chuck arbor MK 4 / B 18 - Keyl ...
new
bore capacity in steel (diameter): 35,0 mm bore capacity in cast iron: 40,0 mm throat: 320 mm threading: M 24 in Stahl morse taper: 4 MK bore stroke: 160 mm turning speeds: 65 - 3250 U/min table:: 500 x 420 mm throat: 320 mm weight: 375 kg range L-W-H: 600 x 870 x 2.170 mm Furnishing: - Infinitely variable speed, ideal for - Set the desired cutting speed. - Automatic tool ejector and thread cutting device as standard - Electromechanical drilling feed, adjustable from 0.1 - 0.3 mm / rev - Solid gray cast iron table with rotating and swiveling support surface - T-slots in the machine base enable high workpieces to be clamped - Guaranteed concentricity 0.02 mm, measured in the quill - Hardened and ground gears ensure smooth running - Adjustable drilling depth stop with an easily readable scale Scope of delivery: - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve ...
new
bore capacity in steel (diameter): 32,0 mm throat: 230 mm bore stroke: 120 mm morse taper: 3 MK table:: 400x320 mm turning speeds: 105 - 1725 U/min total power requirement: 1,2 kW weight: 245 kg range L-W-H: 470x810x1710 mm Furnishing: - Compact, stable cast iron construction in a modern design - Infinitely variable speed control - is changed The speed is read on a digital display - Table height adjustment via rack and crank - Right and left rotation of the quill for thread cutting - Powerful 2-stage motor, speed range from 105 - 1725 rpm - Base plate with T-slots for clamping high workpieces - Safety switch with undervoltage release - The spindle runs in the precision ball bearing scope of delivery - Key chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MK 3/2 - Digital speed display - LED machine light - Height-adjustable protective cover The data for this ad w ...
new
bore capacity in steel (diameter): 30 mm throat: 198 mm bore stroke: 75 mm : 16 mm spindle taper: MK3 spindle turning speed range: 95 - 2840 U/min : 320 mm : 190 mm table surface area: 700 x 190 mm connected load frequency: 400 V max. distance between table and spindle-nose: 55 - 405 mm total power requirement: 1,1 kW weight of the machine ca.: 180 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,3 m Drilling and milling machine with - variable spindle speed - Digital depth display - Left / right switch - Cross support - swiveling spindle head - Feeds via hand crank - Tool case with content but without digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 30 mm throat: 250 mm bore stroke: 130 mm spindle taper MT: 3 MK table:: 380 x 380 mm column diameter: 98 mm turning speeds: 75 - 3200 U/min feeds: mm/U total power requirement: 1,1 kW weight of the machine ca.: 220 kg. range L-W-H: 0,5 x 0,6 x 2,05 mm • machine base for clamping high workpieces • Digital Depth Gauge • Gearbox swivels 180 ° • silent running through geärtete, ground oil-cooled gears • Tapping Function • electromagnetic clutch for drill feed • automatic feed • electric drive for table height adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 115 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 350 mm : 130 mm table surface area: 590 x 190 mm connected load frequency: 400 V diameter of hob: max. 80 mm feed: 0,1 - 0,18 - 0,26 mm/U total power requirement: 1,1 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 0,7 x 0,95 x 1,75 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min : 500 mm : 230 mm table surface area: 720 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 40 mm throat: 275 mm bore stroke: 120 mm spindle taper: MK 4 turning speed range: 75 - 3200 U/min : 190 mm : 490 mm table surface area: 700 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 0,8 x 0,75 x 1,85 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
bore capacity in steel (diameter): 32 mm throat: 200 mm bore stroke: 120 mm spindle taper MT: 4 MK table:: 290 x 270 mm column diameter: 92 mm turning speeds: 150 - 2450 U/min feeds: 0 mm/U total power requirement: 1,1 kW weight of the machine ca.: 95 kg range L-W-H: 0,66 x 0,8 x 1,7 m Column drilling machine with: ARBO / CE approved protective cover. Quick release chuck with pin. Tiltable work table. Deep stop. Ejector wedge. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.