dr lange used for sale

pressure:300 t distance between columns:1900 mm stroke:600 mm total power requirement:30 kW weight of the machine ca.:27 t dimensions of the machine ca.:2900 x 3500 x 5400 mm Return Capacity:40 t Main Cylinder:Ø 370 x 350 mm :2 Stk. Ø 80 x 50 mm speed of forward flow:150 mm/sec Return Speed:150 mm/sec Table size:1800 x 1800 x 150 mm Ram plate:1800 x 1800 mm demand for oil:ca. 700 l :max. 900 sec Daylight Opening:900 mm pressure speed:15-8 mm/sec auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc Lineal mess stab NOVOTECHNIK:650 mm Table height above ground level (approx.):1000 mm Light sensors front and rear of SICK:900 + 150 mm Monitor:12 Zoll Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the ...

pressure:400 t distance between columns:2300 mm stroke:600 mm total power requirement:37 kW weight of the machine ca.:25 t dimensions of the machine ca.:3300 x 2800 x 5200 mm Main Cylinder:Ø 440 mm :2 Stk. Ø 100 x 60 mm speed of forward flow:200 mm/sec Return Speed:200 mm/sec Table size:2200 x 1400 x 150 mm Ram plate:2200 x 1400 mm demand for oil:ca. 900 l :max. 600 sec Daylight Opening:900 mm pressure speed:15-8 mm/sec auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc Lineal mess stab NOVOTECHNIK:650 mm Table height above ground level (approx.):1000 mm Light sensors front and rear of SICK:900 + 150 mm Monitor:12 Zoll Hydraulic and mechanical protection of the plunger Two-piece auxiliary motors with 2.2 kw Two-piece auxiliary pumps with a power of 6 L/min. Concurrency monitoring (0.5 mm/m²) Fast forward speed adjustable via plc Maximum deflection of the table at 0, 07mm/m²

form9 DP-18-VARIO Bench drilling machine Lxwxh 540 x 390 x 950 mm Table size 240 x 240 mm Table adjustment 45 ° - 0-45 ° Speed 440 â 2580 min-1 Quick clamping drill Chuck, Chuck clamping range / type 1-16 mm Distance from Chuck to table maximum 325 mm Distance from the drill Chuck to the frame base of 495 mm Motor 230-240 V Motor power 550 W Dimensions L x W x H 540 x 390 x 950 mm Weight net / gross 38.5 / 41 kg G & SC-5906807901

pressure:200 t distance between columns:1200x1000 mm stroke:600 mm total power requirement:32,5 kW weight of the machine ca.:20,5 t draw back pressure:20 t :1 Stück voltage:400 V frequency:50 Hz :24 V :Rexroth/Bosch dayligth:800 mm working area:1200x1000 mm :1200x1000 mm work height max.:1100 mm :170 mm/sek. :150 mm/sek. :15 mm/sek. quantity of oil:500 l :220 V memory:200 Programme :20-200 über Monitor t :5-170 mm/sec. :0-10 sec :2-10 mm/sec :750x950 mm :300 mm :5-50 t :2-80 mm/sec :1000 kg

Built: 1998 Dimensions: 1.15 m x 0.8 m x 2.5 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Umluf fan: 8,000 m3/h; 4.0 kW; 1435 rpm Location : Warehouse Room Herzogenaurach Sales price: € 2,990,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

pressure:100 t distance between columns:3000 x 1500 mm stroke:500 mm total power requirement:30 kW weight of the machine ca.:16 t dimensions of the machine ca.:4000 x 2500 x 4500 m Master cylinder:1 Stück main cylinder:135 x 90 Ø mm Auxiliary cylinder:2 Stück Auxiliary cylinder:90 x 50 Ø mm Table size:3000 x 1500 (mit T-Nuten) mm Ram plate:3000 x 1500 (mit T-Nuten & Federschweisungen) mm work height max.:900 mm pre-running speed:125 mm/sec return speed:100 mm/sec Speed printing phase:40 - 8 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC Controll:Zweihandbedienung Daylight Opening:600 mm fied interior wide:3100 mm auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc pre-run valve:2 Stk pressure stop valve:max. 200 min Lineal mess stab NOVOTECHNIK:550 mm Table parallelity:0,05 mm / m² Guide rails for parallelism :verschraubt Light sensors front an ...

pressure:500 t distance between columns:1500 x 800 mm stroke:800 mm total power requirement:45 kW weight of the machine ca.:25 t dimensions of the machine ca.:2200 x 2200 x 4800 m Master cylinder:1 Stück main cylinder:500 Ø mm Auxiliary cylinder:2 Stück Auxiliary cylinder:120 x 80 Ø mm Table size:1500 x 1400 (mit T-Nuten) mm work height max.:950 mm pre-running speed:190 mm/sec return speed:200 mm/sec Speed printing phase:20 - 8 mm/sek. Hydraulic block:REXROTH Oil Tank Capacity:1500 l demand for oil:1300 l pressure control:über PLC Daylight Opening:1200 mm fied interior wide:1500 x 800 mm auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc pre-run valve:NG pressure stop valve:max. 600 sec Lineal mess stab NOVOTECHNIK:850 mm Table parallelity:0,05 mm / m² column diameter:200 Ø / mm automatic fat lubrication:über Bildschirm einstellbar Guide rails for parallelism :4 fach Light  ...

Year of construction : 1983 / 2003 Oven and burner renewed Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 93 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air fan: 8,000 m3/h; 4.0 kW; 1500 rpm Location : Camp Herzogenaurach Sales price: € 2,900,- net, from location We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

with automatic working cycle, max. working width / stroke length of the oscillation 120 mm, drilling depth max. 80 mm, table inclination max. 20, tool clamping diameter max. 13 mm, drilling diameter max. 20 mm, spindle motor power 2.24 KW / volt. 380/50 Hz, spindle speed 9,000 rpm, oscillating motor power 0.75 KW, oscillation adjustable from 120 - 240 huebe per minute, pneumatic factory tension, 4 suction nozzles D=80 mm, space requirement - depth 1,000 mm, width 1,300 mm, height 1250 mm, weight 500 KG; Technically and visually in very good condition

Table drilling machine Ixion without base from a training workshop Type BT15STP stepless speed control via PIV gearbox Hoehen adjustment via rack, Speeds from 200rpm to 3,600rpm Flott Alzmetall Maxion Gillardon Special price

Alzmetall AB4SJ Tool holder MK4 automatic feed with 3 feed speeds 2 shoot stages and infinitely variable speed control right left barrel, thread cutting device Cooling agent device in the foot Round table with holes without rev counter Machine hood modern made of plastic with cracks and loechers Speed: 80-710 rpm Table diameter: 450 mm Max distance from spindle to foot: 1200 mm Extension to center spindle: 170 mm Machine hoe approx. 200 cm Bt323s8 SPECIAL PRICE due to visually poor condition according to photos, technically usable condition, the drill is not locked at the shaft drill spindle tool holder in the rotational motion (see photos). If the drill is not firmly in the drill spindle, it rotates through. Special price

Fine drilling head for lid fraes machine, probably FP2, SK40, little used condition. Special price

Stichelbock, Stitch Grinding Machine Scripta, very good condition, Collets. More information on request Special price

Drill grinding machine drill Grinding drillautomaticallys automatically in one clamping. maximum drill diameter 60mm (probably 80mm) Also suitable for drills with three or four cutting edges. Ready for immediate use. Simon SP50 SP80 Special price

Railway film 420 mm Preferential 600mm Fresh meat machine

- with power take-off drive 540 rpm without universal shaft capacity 6 m³/h dimensions: length 1 225 mm width 785 mm height 1 400 mm weight 220 kg material steel varnished discharge height 550 mm discharge connection diameter Ø 160 mm suitable for all sorts of straw scope of delivery screen 22 mm perforation ; new machine - top condition

4 drum pumps; pneumatically operated; suitable for 200L faessers; with base and distribution line.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Duerselen 7-fold drill head; suitable for Duerselen Corta paper drilling machines; was developed for aviation, stapling for flight maps; Abstaende see picture. ; ready for use. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Height of bed rail until mid-drilling: 315 mm Gr. On drill bit Ã?: 178,3 mm Bed length: 9400 mm Drilling depth approx.: 3150 mm Continuous feed range: 70-1750 mm / min Rapid traverse speed: 4.25 m / min Spindle box, bore: 62 mm Main spindle RPM: 180-1000 rpm Main spindle drive: 380 V, 15 kW Machine weight: 6.6 t

Transmission used, overhauled Ship boat reversing gearbox Delivery in possible exchange / reverse gear on exchange basis Various types and ratios available AS 71C; AS 72C; AS 73C; 10-17-000-001; AS1-71C; 10-17-000-002; AS1-71CR; 10-17-000-003; AS1-71CB; 10-17-000-004; AS1-71CBR; 10-17-000-005; AS2-71C; 10-17-000-006; AS2-71CR; 10-17-000-007; AS7-71C; 10-17-000-008; AS7-71CR; 10-17-000-009; AS3-71C; 10-17-000-010; AS3-71CR; 10-17-000-011; AS14-71C; 10-17-000-012; AS14-71CR various versions in stock

Blue Max mini Hardware drilling machine Spindle number 6 Table-top model Engine 0,8 KW 400V 50 Hz Masch. No. 04416 Pneumatic drill feed Fence without stand (optional) Year of build 2016 G & 2574-M3I2J

Hettich YYB-800 Hardware drilling machine BLUEMAX YYB-800 type Spindle number 6 (2-3-1) Table-top model 1 KW 230V Masch. No. 09411 Manual drill feed Without stand (optional) Year 2011 G & 2569-M3F6Nl

Hettich-blue-mini-MAX Hardware drilling machine Type Blue-Max-mini Spindle number 4 Table-top model Motor 0.75 KW 400V 50 Hz Masch. No. 01395 Manual drill feed without stand (optional) Built in 1995 G & 2827-M3I2J

Built in 1997 Length conveyor belt approx. 55 m Equipment o drying tower upward o infeed left at the bottom o outfeed 270° at the top ; working condition

Standard equipment: Drive: V-belt and gear unit combination Automatically elektomagnetischer spindle feed machined base plate with T-slots and coolant system integrated precise mechanical drilling depth setting automatic tool ejector Lighting Motor protection switch with tripping for U Emergency off pushbutton Drill protection with Electr. Hedging Rotary and swivel table Thread cutting device Gear lubrication through automatic oil pump Push button feed at the handle Stepless speed adjustment, frequency-controlled potentiometer and 3-way manual transmission for stage change Technical data: Drilling capacity 50 mm Thread cutting capacity (depending on elevation) M42 Spindle MK IV Depth 200 mm Throat depth 360 mm Column diameter 175 mm Usable surface (pivoting) 550 x 550 mm T - slot size number 3, distance 160 mm Dimension width 16/28 Digital speed display Dri ...

This evaporative dryer was built in Hungary by DKG-EAST RT in 1995. The equipment was transported to Finland, where it was inspected by Finnish Inspecta in 1999. The original purpose of this equipment was to concentrate waste water solution from a molasses production process by evaporating water, but the system was never installed. The certified pressure for the equipment is max 2.0 bar, min -1.0 bar. The input heat for the evaporation comes from steam of 200 °C. The equipment is suitable for similar purposes, concentrating waste water streams from various processes and thus reducing the amount of waste water to handle. Capacity in molasses wash water evaporation: Input of thin stillage: 30.0 t/h, 8.5 % Output of product stillage: 3.54 t/h, 72 % Steam input: 3.9 t/h, 200 °C, 11018 MJ/h Heater 1. Price 90.000 € Nominal heat surface 512 m², actual heat surface 518 m². Max ...

Glatt LR 350 mobile elevating and tipping device for drums and containers etc, max weight load 350kg, fork length approx. 750mm, fork diameter approx. 73mm, approx 910mm gap, max. lift height approx. 1450mm from the floor.

: 8 St. range L-W-H: 720 x 580 x 1000 mm weight: 128 kg : 100Kg je Lade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Line boring machine Ayen with 32 mm grid Bahvy3bjt2 with attacks Pneum.. Holders Motor 0.55 kW L x W x H: 250 x 80 x 200 cm Weight 420 kg Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

: 6 St. range L-W-H: 720 x 580 x 800 mm weight: 100 kg : 100Kg je Lade The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Size max 350 x 440 mm min 146 x 103 mm format trimmed max 310 x 420 mm min 140 x 100 mm Product thickness max 70 mm min 3 mm power max 6,600 c/h equipment o Ribbon supply o Zubehoer for format change: o 1 set of press plates and holders o 1 set table tops / bars o 1 set of plate tables o 3 set cutting strips o 2 knife seeds o Info: with cassettes ; ready for operation

bore capacity in steel (diameter): 3 - 5 mm throat: 150 mm bore stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Various Special purpose drilling machines The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-sided fully automatic hydraulic cutting - milling - drilling machine PADE NST double-sided fully automatic hydraulic cutting - milling - drilling machine Production of chairs, tables, frames, and furniture parts Max work length 2100 mm Tilt-10° â +45° Rotation-10° â +50° 2 saw blades diameter 400 mm 2 drilling heads left, right can be rotated through 360 °, 8 spindle cross-shaped grid M2fi2 2 additional horizontal drilling heads from behind can be rotated by 360 °, 8 spindle cross-shaped grid 2 milling spindles bore wave 30 mm 1 motor for longitudinal adjustment of 1.5 kW 2 Saegemotore 2.2 kW 4 boring Motors 2.2 kW

CNC double-staender coordinate drilling rig with deep drilling support Kolb KBN G 120 year 1984 / Converted to Heidenhain TNC 426 in 2006 table size 4250 x 2200 mm Table load 14 t Table laengsweg X 3000 mm Main Spindle crosspath Y 2180 mm deep drilling spindle crossing path A - 2000 mm spindle vertical path 500 mm Distance between the stems 2640 mm; spindle - table 100 - 1300 mm; spindle diameter 224 mm Spindle drive power 46 kW spindle speeds 14 - 1400 rpm spindle holder ISO 50 Drilling in steel ST60: 100 mm diameter; drill up to 300 mm; threaded cutting up to M 125 x 3; frard power 730 cm3r/min.; SECOND SUPPORT SUPPORT: spindle speeds at BTA and ELB drilling 315 - 3150 rpm high high pressure oil Offer number V(B)-5234; Very good

UWM BORING MILLING MACHINE TYPE 40A -MK4 -75/1600 t/m -Draait right en linksom -Tapfunctie -Boorgedeelte is in hoogte verstelbaar -Boorgedeelte is kantelbaar -Tandwielaangedreven -Beschermkap -Noodstop -Boorkop Zelfspannende -Documentatie -400V PRICE is plus VAT DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

Drum cleaner type EIRICH with double screen 1.5 m width

Mixed lot of new and used deep hole drills gemaess list

10 pcs spiral drill 17 x 320 mm lg. (total) more: 17.25 x 320 mm lg. 17.00 x 350 mm lg.

see side sheet below, with 2-spindle drill head Franz X. LINDNER SBS-2/2, spindle distance 300 mm, (translation 1:1)

Drilling and threaded spindles, with FIBRO round board approx. 800 mm, See pictures

with NC round table WALTER 1000 mm, see pictures

INDRAMAT Spindle Drive Module RAC3.1-150-460-A00-W1-220 Bosch Rexroth

CNC,5 axis JOBS,Linx Compact + Heidenhain TNC 530 HSCI Year of construction: 2013 X-2000 Speed up to 60m/min, Force (N) 9000 Acceleration 4.5 m/sec2 Y-3000 Speed up to 60m/min, Force (N) 9000 Acceleration 6.0 m/sec2 Z-1250 Speed up to 60m/min, Force (N) 9000 Acceleration 7.2 m/sec2 C - +/- 200 Straight , Torque 1200Nm ,Max torque with clamped axle 5000 Nm A - -120/+95 Torque 1200Nm, Max torque with clamped axle 5000NM Speed: 15,000 rpm Cone according to HSK-A-100 Weight : 70000 Kg Tool magazine type chain 32 tool positions, Max tool weight 15kg for more info, please call or write an e-mail. Machine is immediately available and in case of serious interest can be visited under power An invoice with VAT will be issued

see picture for data. Table hoehen-adjustable. mass approx.: 1.55 x 0.8 x 2.1 m high

Drill grinding machine for 1.55 to 25.4 mm - see pictures

2 squid drilling spindles ROTAX, for conversions etc.

Towing radial, Mk 4, universally adjustable

Spindle cone MK 4 Machine weight approx. 2.5 t Space requirements approx. 2.2 x 0.7 x 2.5 m

Threaded drilling machine with up to 10 spindles, adjustable drilling pattern

1 Items various drill bushes