142,465 used machines on RESALE, but how to find them? Machine Search
Dowel and slotted hole drilling machine GANNER JUNIOR 320 LBM very good condition, as good as new, the machine comes from a small carpenter's shop and was used there very little This allows slotted holes to be milled and dowel holes to be drilled in 2 planes without reclamping 380V, 1500W Speed: 2800 rpm Year of Make: 1990 with the machine you can mill slotted holes for e.g. lock cases and similar things or make all kinds of frame and dowel connections, at right angles, blunt and mitred ideal for the production of dowel joints in timber frame construction, furniture, doors, windows and stairs construction and for similar things by drilling on 2 levels, by the grids and stops and by the construction of the machine, dowel connections are made in the shortest possible time, which makes the machine very economical the machine requires a compressed air connection of 6bar (the air ...
Manufacturer: TOS Model No.: WHN 13 Year: 1976 Condition: Used Stock number: 9611 Work table length: 1800 mm Work table width: 1800 mm X-axis travel: 3500 mm Y-axis travel: 2000 mm Z-axis travel: 800 mm Spindle diameter: 130 mm Machine weight: 32000 kg
Manufacturer: TOS Model: W 100 A Year: 1987 Condition: Used Stock number: 9615 Work table length: 1250 mm Work table width: 1250 mm X-axis travel: 1600 mm Y-axis travel: 1120 mm Travel travel Z-axis: 1250 mm Spindle diameter: 100 mm Machine weight: 14000 kg
Universally applicable frame and slotted hole drilling machine Especially for window construction and universal use due to pneumatic height adjustment Duelhole drilling on two planes in one clamping Motor power 1.5 kW Start of the motor with practical handle switch With two-jaw chuck 1 - 20mm from Röhm Pneumatic adjustment of the processing height, dowels on two levels without changing. The desired drilling heights can be set for each drilling level with a digital counter, the changeover then takes place pneumatically from the front Transverse adjustment 430mm, infinitely variable or in 12mm increments Maximum height adjustment approx. 100mm above table height Drilling stroke approx. 150mm 2 pneumatic workpiece clamps Grid rail for quick adjustment on the side in 12mm grid Stop for length adjustment in slotted milling 2 swivelling workpiece supports Special stop syst ...
Drying oven, drying cabinet, chamber dryer oven, preheating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet, universal oven -Manufacturer: Delair, Drying cabinet universal oven type SPX ED-400-TC -Usable space: 500/4070/525 mm -Heating power: 2000 W -Nominal temperature: 50 - 300°C -Voltage: 230 V -Dimensions: 760/720/H915 mm -Weight: 87 kg
: max. 1500 vice: ja feed: ja m/min tool adaptor: MK 2 weight of the machine ca.: 140 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Indexable insert drills, high-performance drills with indexable inserts, solid drills, end mills, shank cutters, milling cutters, indexable insert milling cutters, shank cutters with internal cooling, indexable end mills, indexable insert drills -Manufacturer: Sandvik, Indexable insert drills with internal cooling -Type: 880-D1750L25-03 -Hole: Ø 25 mm -Diameter: See photos for sizes/reversible inserts -Dimensions: Ø 32 x 128 mm -Weight: 0.3 kg
Indexable insert drills, high-performance drills with indexable inserts, solid drills, end mills, shank cutters, milling cutters, indexable insert milling cutters, shank cutters with internal cooling, indexable end mills, indexable insert drills -Finger end mill: Indexable insert end mill with internal cooling, 2 pieces -Hole: Ø 40 mm -Diameter: See photos for sizes/reversible inserts -Submission/Price: complete -Transport dimensions: 240/105/H60 mm -Weight: 3.5 kg
Indexable insert drills, high-performance drills with indexable inserts, solid drills, end mills, shank cutters, milling cutters, indexable insert end mills, shank cutters with internal cooling, indexable insert end mills -Finger end mills: Indexable insert end mills with internal cooling, 10 pieces -Hole: Ø 32 mm -Diameter: See photos for sizes/reversible inserts -Submission/Price: complete -Transport dimensions: 265/100/H190 mm -Weight: 7.3 kg
Indexable insert drills, high-performance drills with indexable inserts, solid drills, end mills, shank cutters, milling cutters, indexable insert milling cutters, shank cutters with internal cooling, indexable end mills, indexable insert drills -Finger end mill: Indexable insert end mill with internal cooling -Hole: Ø 50 mm -Diameter: Size/reversible inserts see photos -Dimensions: Ø 70 x 285 mm -Weight: 2.8 kg
Specialized socket wrench set for unscrewing oil pan drain plugs. The set includes 17 sockets with a 3/8\" drive and 3/8\" joint. All elements of the set are made of durable CrV tool steel. Auction-ID: A7-50799-213
Wood drill bits, the set includes 6 drill bits, 460 mm long, in sizes from 6 mm to 18 mm Auction-ID: A7-50799-56
Mini Excavator Drill Rig, Compatible for 800 -2500 kg Excavators, 200 mm Bore, Never Used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-50798-364
Quadcopter, with camera. Remote control included, never used Overall dimensions: 300 x 300 x 300 mm Weight: 2 kg Auction-ID: A7-50798-185
Zelfir screw air compressor, reduced consumption, reduced noise thanks to motor management by inverter managed by digital panel, compressor with pressure 8 bar and power 10 hp, air tank 300 liters. Never used Overall dimensions: 2000 x 800 x 1500 mm Weight: 250 kg Auction-ID: A7-50798-349
Metal drill bit set. The bits are made of HSS high-speed steel with titanium nitride coating. The set includes 19 bits in the following sizes: 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5 and 10.0 mm. The set is contained in a metal box. Auction-ID: A7-50799-158
Set 170 Pcs Professional HSS Metal Drill Bits, Engineering Presion Drilling Tools, Assorted Titanium Kits 1mm-10mm Auction-ID: A7-50799-281
1/2\" pneumatic impact wrench with socket kit. Ideal for tightening car wheel bolts, assembly work and repairs. Auction-ID: A7-50799-8
21 V cordless drill/screwdriver The device is ideal for drilling in different materials and for screwing and unscrewing screws, bolts, self-tapping screws, etc. The set includes two 2 Ah batteries, a charger and a practical plastic case. Auction-ID: A7-50799-209
DRC screw air compressor, reduced consumption, reduced noise thanks to motor management by inverter managed by digital panel, compressor with pressure 8 bar and power 10 hp, air tank 330 liters NEVER USED Overall dimensions: 2000 x 800 x 1500 mm Weight: 250 kg Auction-ID: A7-50797-7
21 V cordless drill/screwdriver The device is ideal for drilling in different materials and for screwing and unscrewing screws, bolts, self-tapping screws, etc. The set includes two 2 Ah batteries, a charger and a practical plastic case. Auction-ID: A7-50799-109
Used Ebara AA10N V1-E Dry Vacuum Pump Manufacturer: Ebara Model: AA10N(-E) Ultimate Pressure: 4.0 Pa. Cap: 1300 L/min. Power: 200/220 Volts, 50/60 Hz (3Ph.) Dims: 38cm x 86cm x 55cm Weight: ~130kg Auction-ID: A1-50936-29
Silenced screw compressor controlled by LCD display and inverter for modulation of engine rpm to reduce consumption, 7.5 kw 10 hp motor - pressure 8 bar, complete with digital dryer and air filters, never used 0 hours Auction-ID: A7-50797-20
Silenced screw compressor controlled by LCD display and inverter for modulation of engine rpm to reduce consumption, 7.5 kw 10 hp motor - pressure 8 bar, complete with digital dryer and air filters, never used 0 hours Auction-ID: A7-50799-5
1/2\" pneumatic impact wrench with socket kit. Ideal for tightening car wheel bolts, assembly work and repairs. Auction-ID: A7-50799-208
Used Druck DPI 705 Digital Pressure Gauges/Indicators Battery operated Auction-ID: A1-50936-223
Silenced screw compressor controlled by LCD display and inverter for modulation of engine rpm to reduce consumption, 7.5 kw 10 hp motor - pressure 8 bar, complete with digital dryer and air filters, never used 0 hours Auction-ID: A7-50797-8
DRC screw air compressor, reduced consumption, reduced noise thanks to motor management by inverter managed by digital panel, compressor with pressure 8 bar and power 10 hp, air tank 330 liters NEVER USED Overall dimensions: 2000 x 800 x 1500 mm Weight: 250 kg Auction-ID: A7-50798-331
Used Rena RT-33 semiconductor wafer dryer/centrifuge Manufacture year: 2500 for 5′ Inch semiconductor (solar) Wafers 230 Volt, 2.2 Kw, 16 A, Single phase With documentation Auction-ID: A1-50936-175
Wood drill bits, the set includes 6 drill bits, 460 mm long, in sizes from 6 mm to 18 mm Auction-ID: A7-50799-156
DRC screw air compressor, reduced consumption, reduced noise thanks to motor management by inverter managed by digital panel, compressor with pressure 8 bar and power 10 hp, air tank 330 liters NEVER USED Overall dimensions: 2000 x 800 x 1500 mm Weight: 250 kg Auction-ID: A7-50797-11
Mini Excavator Drill Rig, Compatible for 800 -2500 kg Excavators, 200 mm Bore, Never Used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-50798-342
3x used Atlas Copco CD3 Compressed Air Dryer \"Heatless regenerating absorption dryer\" Auction-ID: A1-50936-182
Zelfir screw air compressor, reduced consumption, reduced noise thanks to motor management by inverter managed by digital panel, compressor with pressure 8 bar and power 10 hp, air tank 300 liters. Never used Overall dimensions: 2000 x 800 x 1500 mm Weight: 250 kg Auction-ID: A7-50798-232
Zelfir screw air compressor, reduced consumption, reduced noise thanks to motor management by inverter managed by digital panel, compressor with pressure 8 bar and power 10 hp, air tank 300 liters. Never used Overall dimensions: 2000 x 800 x 1500 mm Weight: 250 kg Auction-ID: A7-50798-407
Specialized socket wrench set for unscrewing oil pan drain plugs. The set includes 17 sockets with a 3/8\" drive and 3/8\" joint. All elements of the set are made of durable CrV tool steel. Auction-ID: A7-50799-113
Used Ebara A10S Multistage Dry Vacuum Pump Auction-ID: A1-50936-244
DRC screw air compressor, reduced consumption, reduced noise thanks to motor management by inverter managed by digital panel, compressor with pressure 8 bar and power 10 hp, air tank 330 liters NEVER USED Overall dimensions: 2000 x 800 x 1500 mm Weight: 250 kg Auction-ID: A7-50799-375
Used Hauser Compax 200 E Servo drive/controller Manufacturer: Parker / Hauser Model: Compax 200 E / 560 E Power: 380 volts Auction-ID: A1-50936-162
Used Ebara A10S Multistage Dry Vacuum Pump Auction-ID: A1-50936-240
Mini excavator drill rig, compatible for excavators from 800 - 2500 kg, bore 200 mm, never used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-50798-272
Used Ebara A10S Multistage Dry Vacuum Pump Auction-ID: A1-50936-238
21 V cordless drill/screwdriver The device is ideal for drilling in different materials and for screwing and unscrewing screws, bolts, self-tapping screws, etc. The set includes two 2 Ah batteries, a charger and a practical plastic case. Auction-ID: A7-50799-9
Quadcopter, with camera. Remote control included, never used Overall dimensions: 300 x 300 x 300 mm Weight: 2 kg Auction-ID: A7-50799-413
For metal, Ø1-10 mm Overall dimensions: 350 x 250 x 100 mm Weight: 5 kg Auction-ID: A7-50798-129
Mini Excavator Drill Rig, Compatible for 800 -2500 kg Excavators, 200 mm Bore, Never Used Overall dimensions: 800 x 200 x 200 mm Weight: 80 kg Auction-ID: A7-50798-365
Used Ebara A10S Multistage Dry Vacuum Pump Auction-ID: A1-50936-241
Used Ebara A10S Multistage Dry Vacuum Pump Auction-ID: A1-50936-242
1/2\" pneumatic impact wrench with socket kit. Ideal for tightening car wheel bolts, assembly work and repairs. Auction-ID: A7-50799-108
DRC screw air compressor, reduced consumption, reduced noise thanks to motor management by inverter managed by digital panel, compressor with pressure 8 bar and power 10 hp, air tank 330 liters NEVER USED Overall dimensions: 2000 x 800 x 1500 mm Weight: 250 kg Auction-ID: A7-50797-3
maximum number of results exceeded
please refine your search
27 € 
