down pressing machine used for sale

Baader 189 Filleting machine for cod and whitefish Condition: overhauled This machine processes cod, pollack, haddoch, hake employing well proved system with high fillet yield. Size range: fish from 40 to 85 cm (or 0,6 - 4,5 kg gutted fish with head) Capacity: 24-34 fish per minute Fish are loaded on to the machine after heading. The filleting tools adjust themselves to the different fish size within the operating range. For skinning the fillets have to be transferred manually to a skinning machine. Power consumption: 3 kW Water consumption: 15 liters per minute Dimensions (LxWxH): approx. 4000 x 1100 x 2400 mm Weight (net/gross): approx. 1060/1650 kg Can be combine with heading machine Baader 427 and skinning machine Bader 51 to compile a complete line.

Heading machine Baader 421 Condition: good Capacity: 28 fish per minute Water consumption: 12 l/min Staff: 1 person Dimensions (LxWxH): 1350x1000x1270 mm Weight: 660 kg

Sind cevapi and cevapcici automatic machine, NEW

Kronborg KM Mark 5 Fish gutting machine Condition: Overhauled in 2021 The Jutland Kronborg Fish Gutting Machine is designed for gutting fish such as cod, saithe, haddock, whiting and hake on board trawlers as well as in land-based factories. It is also suitable for river types of fish like a carp. The fish is placed continuously in the feeding chamber, there a conveyor belt with catches transports the fish through a positional system of guiding plates to the gutting chamber. The rotating knife cuts the fish as required. After having been cut, the fish passes a rotating nylon brush and water sprays which remove the last entrails. The gutted fish is led to the outlet end for further transportation. Due to the small size and weight, this machine can be used on vessels of the coastal fleet and shore plants. Capacity: 40 fish per minute Size range: 30-75 cm Power consumptio ...

all stainless steel belt width 600 mm to form meat balls from 6 to ± 80 gr suitable to put in line with a forming machine (VM 400) adjustable speed mobile dimensions (l x w x h) : ± 1.300 x 700 x 1.500 mm

Standing seam metal roof machine F3 Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing s ...

Continuous vacuum filler for straight filling, portioning, and twisting All in one 80 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 90 Length: 70 Height: 160 Delivery time: 20 working days after advanced payment

Type: S200 Vacuum Filling Machine Continuous vacuum filler for straight filling and portioning All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.6 KW Machine dimensions in cm: Width: 205 Length: 130 Height: 210 Delivery time: 20 working days after advanced payment

Type: ESB 3450 Automatic derinding with infeed conveyor belt High operator safety for derinding of flat cuts with infeed conveyor belt Cutting width: 400 mm Electric power: 0.88 KW Machine dimension in cm: Width: 80 cm Lenght: 110 cm Height: 120 cm Delivery time: 10 working days after advanced payment

Bending machine FAVRIN 3100×30 PHLS CNC (A3708) Type: hydraulic Max worklength: 3100 mm Eletric motor (power) 75 HP Courant needed 380V Weight 32 ton Machine was previously used to bend Hardox workpieces. bending capacities examples: – 3100 x 25 mm > multi stage bending for large radiuses – 2500 x 30 mm > multi stage bending for large radiuses – 3100 x 17 mm > single stage bending – 2500 x 25 mm > single stage bending full CNC corner + backgauge control upper hydraulic clamping of tools clamping force: 220 ton max bending angle: 110° max open: 500 mm Tooling included for radius bending Also 2 new extra cilinders included

Folding machine HELMUT LOTZE 3100×9 CNC (A3709) Max worklength 3100 mm Max tickness 9 mm Distance between clampblock — ram 300 mm Eletric motor (power) 15 kW Length 5050 mm Depth 1875 mm Hight 2040 mm Weight 15 ton ACCESORIES yes Additional info Type 116 Mechanical drive Cybelec CNC control Cap: 2500 x 10 mm / 2000 x 12 mm

- workpiece diameter d680 - max workpiece length 3400 mm - max working lengths 2600 mm - with discs (d1100 mm) - required electric capacity 60 kW/h - under power, in use

Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Equipments: Size: B65xT70xH160 cm Power supply: 380 V wire sizes: round wire No. 30 to 21 Issue size: up to 25 mm Speed: max. 170 stitches/min Block-/Sattelheftung Weight: approx .: 250 kg stapling speed: up to 170 staples / min as is

Baader 166 Fish Gutting machine Small whitefish heading and gutting machine Condition: perfect This machine operates according to the same procedure as the Baader 162, however, within the range of smaller whitefish from 35 to 70 cm in total length (0,5 to 2 kg). When using both machines at the same time, total catches can be processed after rough grading since the working ranges of both machines overlap generously. Capacity: 25, 35 or 40 fish/min Power consumption: 2 kW Water consumption: 25 L/min Dimensions: 1,40 x 1,20 x 1,80 m Weight (net/gross): 650/920 kg The Baader 166 can be combined with the Baader 184

Monoblock labeller/capsuling Eticap System Year: 1994 Speed: 2.000 bph 2 cold glue stations 3 plates Direction: Counterclockwise Safety protections

labeller GIERRE | Capsuling machine Year: 2000 Speed: 2.000 bph Direction: Linear Nr.2 adhesive station Capsuling machine 2 snare heads Distributore capsule a plateau Safety protections

Double-sided double-spindle drilling and grooving machine Balestrini Pragma Top Characteristic Overall dimensions, mm - 1600х1600х1300 Power, kW - 4,5 Machine weight, kg - 1500 Drill diameter, mm - 16 Table height, mm - 950 Distance from the table to the spindle, mm - 100 Clamp - pneumatic

Baader 185 Filleting machine for whitefish Baader 185 provides filleting and skinning of a whitefish: big and medium cod, haddock, saith, merluza or the same fish. This machine is similar to the Baader 184. Its guidance assemblies and tools are, however, larger dimensioned. The working range of this machine is abt. 50 to 100 cm (=1 - 8,5 kg) for cod , abt. 50 to 90 cm (=1 - 6 kg) for saithe and abt. 50 to 80 cm (=1 -4,5 kg) for haddock, cm meaning the total length of the fish and gutted fish head on. Also can process de-headed fish: cod 40-80 cm (0.8-6.5 kg), saith 40-75 cm (0.8-5.0 kg) and haddok 40-65 cm (0.8-3.5 kg). Also with an integrated skinning unit the Baader 185 is highly efficient with optimal product quality and high yield. Completed with skinner Baader 51. Capacity: 24-32 fish/min Staff: 1 person Power consumption: 10 kW Water consumption: 28 l/min ...

Baader 184 Filleting machine for whitefish Filleting machine for whitefish Condition: Overhauled This machine is designed for filleting gutted and headed cod, saithe, haddock from 30 to 70 cm in total length (=0,3 - 2,5 kg, h&g) or depending upon the type of fish, also less than 70 cm. Time-tested Baader filleting system with high yield and operational reliability. The Baader 184 is equipped with an integrated skinning unit. Capacity: 24-40 fish/min Power consumption: 10 kW Water consumption: 25 l/min Dimensions: 6,15 x 1,70 x 1,50 m Weight (net/gross): 2550/2850 kg

Profile bending roll used equipment hydraulic model AR200 year 2008 make MG Italy Capacity bending chart photo in enclosed -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. - ...

Automatic tufting machine. Makes pattern in shape of circles. Can tuft mattresses. Frame is moving according to program. Tufting is done with Hector sewing machine.

Lawn building machine Sembdner RS 60 R, working width 60 cm, drive F&S 2-stroke petrol engine. Reversing gearbox for forward and reverse travel. Equipment: smooth roller with scrapers at the front, hedgehog with cleaning cage in the middle, smooth roller with scrapers (water-fillable) at the rear, seed container with brush shaft and dosing slide. Technically good condition, but with flash rust and engine without ignition sparks - does not start. Branded product from Munich (Germany). Shipping optionally possible.

For sale, completely overhauled flour packaging machine 1kg. The machine includes a auger feeder with a mixer as well as an automatic gluer. Capacity approx. 1t per hour (20kg/min).

MF-25 Corner Forming Machine

Jeros 6015 TRAY CLEANING MACHINES

Tretter drill sharpening machine Length L -- R: 1200 mm Depth Fw --Bw: 1000 mm Height: 1500 mm Weight: 1,6 ton

product width 240-300mm product length 200-450mm film thickness 0.008-0.02mm two lanes production speed max 500 pcs per minute machines are almost unused

Filleting machine for salmon and trout This filleting machine processes salmon, trout from abt. 2 to 7 kg up to 20 fish/min (depending on fish size). The CT2630 in many ways is similar to the CT 2611. But the main difference from the CT2611 is the combination of band knives and circular knives. Due to this combination the machine CT2630 treats the fillets very gently. The band knives automatically adjust to the size and shape of the fish and the circular knives make sure that the cut is made as close to the backbone of the fish as possible. A clean cut with maximum yield is achieved. With this filleting machine time-consuming readjustment is avoided. By simple adjustment of valve pressure, the machine automatically cuts the required type of fillet. The open design of the filleting machine makes cleaning considerably easier. At the back of the machine you will find two access doors  ...

One of the latest innovations by Baader for the fish industry. This machine is designed for filleting defrosted whitefish (with an average capacity of up to 40 filets per minute). Characterized by improved quality of smooth cutting even on soft fish (doesn't leave bloodstains or gaps on flesh). Easy to maintain at the production line, and easy to operate. Power: 4kW Voltage: 3x 400 V/ 50Hz Water consumption: 10L per/min Water pressure: 2,5 bar

The Breivik is a full stainless steel head-cutting machine for large fish. The machine is designed to be operated with fish of total length including the head, between 50 - 120 cm. Both smaller and larger fish may be processed successfully. Only bleeding fish must be used to obtain the correct placement for the head-cutting process. The fish is placed with the belly downwards and with the bled throat over the throat guide. Place the fish perpendicular to the throat guide into the body and tail carrier. The fish will then be driven towards the knife and the head will be cut and fall of to the right of the machine. The body will continue straight and over the top of the machine. Power consumption: 1,5 kW Dimensions (LxWxH): approx. 1610 x 875 x 1680 mm Weight of machine: approx. 375 kg.

This machine is designed for removing heads from the next fish species: cod, pangasius, catfish, and tilapia. Fish size range: 30 - 70 cm. Capacity: up to 40 fish per minute.

Baader 52 DS is in excellent overhauled condition, this deep-skinning machine is specifically designed for efficiently removing the skin, along with the fatty layer between the skin and muscular tissue, using an oscillating blade. The thickness of the cut can be adjusted to meet specific requirements. It is suitable for processing various fish species such as salmon, saithe, merluza, Alaska pollack, and more. With a capacity of skinning 30-150 fillets per minute, Baader 52 DS offers reliable performance. It can be seamlessly integrated with all Baader whitefish and redfish filleting machines, enhancing overall processing efficiency. The power consumption of the machine is 2.0 kW, ensuring energy-efficient operation. It requires an electricity supply of 380 V at 50 Hz. The dimensions of the machine are 2150 x 850 x 1120 mm (length x width x height), providing a compact footprint  ...

Inv. Num. : 6972 Parameters: Chamber dimensions: 10,000 x 6,000 mm Door size: 4,000 x 3,000 mm Equipment: Abrasive feed conveyor Components: Aviator Air purifier Compressor Filter Blasting machine with wheel conveyor

New Work Machine Cabin Manufacturer: NTcab External dimensions: 130x140x170cm LxWxH Curb weight: 1016 kg The cabin is therefore new and very versatilely equipped.

Brand: Bavelloni Type: Drilling machine Model: Trapano VT Construction year: 1992

DOUBLE LANES CARTON ERECTING MACHINE Can mount the same box on two strips at the same time German servo motor system German Siemens and Schneider electrical system PLC touch screen Glueing system with motor control Capability to work in different ways with plate Gathering system at delivery unit can be adjusted and connected according to job Voltage: 380V/50Hz Covering area: 4.0 1.4M The total power: 8Kw Maximum production speed: 400pcs/min Air pressure: 0.6Mpa (Dry and clean compressed air) Materials: Paper board 200-600gsm; corrugated board paper with thickness not exceed 1.5mm Blank length(L): 100mm – 450mm Blank length(B): 100mm – 450mm Height of side flaps(H): 15mm – 260mm Height of side flaps+lid(HI): 50mm – 260mm Conicity: 5°-40°

Max. die-cut size: 230 x 230 mm (23x23cm) Min. die-cut size : 10 x 10 mm (1x1 cm) Max. Stack Height : 170 mm (17cm) (Height of cutting die 60 mm) Die-Cutting pressure : 5.700kg Die-Cutting strokes max: 11 p/min Max. machine output 660.000 sheets/h (feeding 1.000 sheets, label paper 80 gsm) Weight: 855 kg Very good condition

We offer for sale a new hydraulic press (65t closing force). This press is used for extruding and dosing mixed mixtures. The operating time of this machine is a maximum of 20 months. The machine was used in the prototype process for the production of the BMC mixture. The machine can be supplied with a special stainless steel tank with a volume of 400 l.

Universal like a handheld device, regardless of package size. If the daily volume of packages is limited, the M-PAC 3 comes into consideration. - For belts 5 – 15.5 mm wide, adjustable - 10 – to 20 strappings/min - Mobile, with lockable swivel castors - Package sizes independent - Adjustable working height - Weight: 50 kg The bandwidth depends on the weight of the package. From a weight of 20 kg, the width should be 9 mm. Attention: Belt rerouting by the operator! This is not a fully automatic machine!

creasing machine for board Make Sächsische Kartonnage Maschinen Model Creasing machine Year 1950 Creasing length 50 cm Creasing depth adjustable/variable Creasing span adjustable-variable Creasing thickness possible up to 4/5 mm board Available Direct

Iberica JR-105 F Automatic Die Cutting machine Age: 1997 Max. sheet size: 750 x 1050 mm Min. sheet size: 350 x 400 mm Max. Speed: 9.000 impr./hour Max. pressure: 300 tm. Equipment: Varioplan System Automatic Feeder Feeding Table 2x Side Lays pushing and pulling system 4x Front Lays Control Panel The Cutting Unit Stripping Unit with chases and tools Non-Stop delivery Machine is elevated Machine comes with Holder Chases and Cutting Plates

Platen Size: 114x165cm, Format: 106x157cm, Speed: 800~1000, Pressure: 380 Ton, Weight: 12000 KG

The Multivac R535 packing machine from 2012 is about 11.3m long. It has a 607 mm upper film and a 623 mm undercarriage.

General SKUR0330 LocationBarneveld MakeBüter Hebetechnik GmbH (D) TypeH 11-06 No.A 11 11720 Year of construction2012 Main Features MaterialMild steel Motor1.5 KW Height600 mm Specified Features - Lifting/tilting machine Lifting machinecheck Max. weight1100 Kg Lifting height0,6 M Hydraulic drivecheck With hydraulic unitcheck Motor1,5 kW 400 Volt MaterialMild steel Information Total height0,7 M Weight750 Kg Floorspace2,5x1,6 MLifting/tilting machinesBüter Hebetechnik GmbHConveying systems > Lifting/tilting machinesBrand > Büter Hebetechnik GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU236T269 LocationBarneveld MakeBohle TypeHS600 No.1020957001 Year of construction2011 Main Features MaterialStainless steel Motor0.55 KW Height3400 mm Specified Features - Lifting/tilting machine MaterialStainless steel Lifting machinecheck Max. weight600 kg Lifting height3400 mm Mechanical drivecheck Motor0,55 kW Information Total height3,2 m Weight650 kg CEcheck Floorspace0,8x0,7 mLifting/tilting machinesBohleConveying systems > Lifting/tilting machinesBrand > Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU349U857 LocationBarneveld MakeHywema TypeKV 12-B No.69397/01 Year of construction2021/12 Main Features MaterialStainless steel Motor2.2 KW Specified Features - Lifting/tilting machine Lifting + tilting machinecheck Max. weight1000kg Hydraulic drivecheck With hydraulic unitcheck Motor2,2kw, 220/380Volt Information Mounted on framecheck With switchcheck With switchgearcheck Weight1350 kg CEcheck Floorspace2,1x2 m Total height3m Extra SpecificationsThe Hywema is equipped with a vibration motor and a dosing lock.  : Vibration motor data: Brand: Venanzetti vibrazion Type: VV05N/2 C1 Voltage: 230/400 Volt Power: 0.17 kW Equipped with CE and EX  : Dosing lock data: Brand: Baumgarten Type: 200aL VA Motor: 0.25 kW, 230/400 Volt Lock speed: 15 rpm Outlet diameter: 200 mm Equipped with CE Lifting/tilting machinesHywemaConveying systems > Lifting/tilting machine ...

Max. 3600 watts. 230V - 6A. IP44: Splash proof. This cable is mainly used in factories, workshops and/or construction sites for the connection of movable electrical equipment, machines, motors, tools and other implements. The outer sheath is resistant to high mechanical loads, weathering, abrasion, oil and ozone.

General SKU277T631 LocationBarneveld MakeGlatt TypeELD 60 Year of construction2016 Main Features MaterialStainless steel Motor0.75 KW Height2700 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4571 (316Ti) Lifting machinecheck Lifting + tilting machinecheck Max. weight200 kg Lifting height2700 mm Hydraulic drivecheck With hydraulic unitcheck (Ex) Motor0,75 kW 230/400 Volt Information Mounted on framecheck With switchcheck Floorspace2x0,6 m CEcheck Total height3,9 m Weight900 kg ATEX compatiblecheckLifting/tilting machinesGlattConveying systems > Lifting/tilting machinesBrand > Glatt What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld ...

General SKU054E249 LocationBarneveld MakeL.B. Bohle GmbH Ennigerloh TypePharma Hubsaul HS-200 Ex No.280 Year of construction1987 Main Features MaterialStainless steel Motor0.75 KW Height2395 mm Specified Features - Lifting/tilting machine MaterialStainless steel Lifting machineStationary lifting column (1x) Max. weight210 KG Lifting height2395mm (outlet height) Hydraulic drivecheck With hydraulic unitcheck Motor0,75 KW Information With switchWith 2x Pharma container type PC-250 Floorspace1,8x0,8 M Total height3,5 M Extra Specifications- 2x container dia. 700x400mm, Conical bottom 530mm, Outlet dia. 200mm Lifting/tilting machinesL.b. BohleConveying systems > Lifting/tilting machinesBrand > L.b. Bohle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are  ...