dolci used for sale

Planetary stirrer, Fabr. DOLMAC, Type MX 12 - 120 l

Time relay, safety time relay, safety controller -Manufacturer: Dold -Type: AA 7616.82 -Number: 9x relays available -Price: per piece -Dimensions: 45/80/H125 mm -Weight: 0.3 kg

Pipe grabs, round grabs, laying tongs, round material grabs, scissor grabs, pipe laying equipment -Manufacturer: Dolezych, round material gripper type RZ SCH -Gripping width: 100 to 350 mm -Load capacity: 1000 kg -Dimension: 825/390/H550 mm -Own weight: 36 kg

Safety relay, safety controller, undervoltage relay -Manufacturer: Dold, safety relay, undervoltage relay, original packaging -Type: AA 9943.12 3AC50/60HZ 230/400V -Number: 2x relay available -Price per piece -Dimensions cardboard: 135/80/H55 mm -Weight: 0.4 kg/pc.

Profibus single module, PLC control, multifunction module, radio safety module -Manufacturer: Dold, radio security module -Type: BI5910.03/00MF9 -Accessories: without antenna -Dimensions: 130/70/H85 mm -Weight: 0.5 kg

Time relay, safety time relay, safety controller -Time relay: pick-up delay -Dold item no.: 0000678 -Dimensions: 170/65/H145 mm -Weight: 0.4 kg

Contactor, semiconductor contactor, contactor, power contactor, time relay, motor contactor, auxiliary contactor -Manufacturer: Dold, time relay energized with delay, unused in original packaging -Type: MI 907 -Voltage: AC50Hz 230V 0.05-1s -Dimensions of box: 130/85/H40 mm -Weight: 0.1 kg

Dolouets 2 GSV 53 press for foam cutting The use of the presses is intended for foam cutting. (cushioning foam, soundproofing or other for automotive, aeronautics, etc.) The last pieces cut are the one in pj. At the documentation level, we have electrical diagrams and a few mechanical plans.

36 Dolav pallet boxes, dimensions: (36x) 1200 mm x 1000 mm x 740 mm.

Safety control -Type: BH5919.54/001 -DC24 V +AC 50/60 Hz 230 V -Weight: 0.5 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws: with plastic insert -Span width: 0 to 10 mm -Load capacity: 500 kg -Number: 2x terminals available -Price: per piece -Weight: 6 kg/piece

Collector coins 2x Jamaica 1 Dollar 1976 and 1977 pp KM57 plus Eastern Caribbean States 10 Dollar 1981 FAO st, each in coin frame

Low-voltage switchgear SIEMENS SIVACON S8 DOL011kW 400 V 3AC 22 A 1x circuit breaker: 3RV1331-4EC10 1x Power contactor: 3RT1034-1AP00 1x Profibus DP interface: SIMOCODE pro V 3UF7010-1AB00-0 1x Current Acquisition Module: 3UF7102-1AA00-0 New, with documents ! Dimensions: 440 x 170 x 260 mm

Low-voltage switchgear SIEMENS SIVACON S8 DOL005,5kW 400 V 3AC 11,5 A 1x circuit breaker: 3RV1321-1KC10 1x Power contactor: 3RT1026-1AP00 1x Profibus DP interface: SIMOCODE pro V 3UF7010-1AB00-0 1x Current Sensing Module: 3UF7101-1AA00-0 New, with documents ! Dimensions: 440 x 170 x 130 mm

Low-voltage switchgear SIEMENS SIVACON S8 DOL007,5kW 400 V 3AC 15,5 A 1x circuit breaker: 3RV1021-4BA10 1x Power contactor: 3RT1026-1AP00 1x Profibus DP interface: SIMOCODE pro V 3UF7010-1AB00-0 1x Current Sensing Module: 3UF7101-1AA00-0 New, with documents ! Dimensions: 440 x 170 x 130 mm

Low-voltage switchgear SIEMENS SIVACON S8 DOL018kW 400 V 3AC 35 A 1x circuit breaker: 3RV1341-4FC10 0 1x Power contactor: 3RT1044-1AP00 1x Profibus DP interface: SIMOCODE pro V 3UF7010-1AB00-0 1x Current Sensing Module: 3UF7102-1AA00-0 New, with documents ! Dimensions: 440 x 170 x 260 mm

Silver coin Solomon Islands 10 Dollar 1991 proof Olympics 1992 running, silver .925 31.42 gr, encapsulated, tarnished, KM48

Collector's coin Mariana Islands 1 Dollar 2004 proof German Colony, Cu-Ni, Encapsulated, Beautiful 11

Silver coin Kiribati 20 Dollar 1992 proof sailing, silver .925 31.47 gr, tarnished, encapsulated, KM17

Silver coin Fiji 1 Dollar 1970, silver .925 28.28 gr, pp, shrink-wrapped, tarnished, certificate, case, KM33a

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frame with forklift load suitable for installation in company vehicles. PTC Dolphin 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Dolphin 75/210 | 75l/min. at 210bar Dolphin 84/190 | 84l/min. at 190bar Dolphin 102/150 | 102l/min. at 150bar DIMENSIONS / WEIGHT: Dimensions and weight without water tank LxWxH: approx. 1,240 x 1,300 x 1,300 mm, approx. 650 kg Dimensions and weight with 500 l water tank: approx. 1,850 x 1,300 x 1,300 mm, approx. 580 kg Dimensions and weight with 800 l water tank: approx. 1,950 x 1,300 x 1,300 mm, approx. 620 kg Dimensions and weight with 1000 l water tank: approx. 2,020 x 1,300 x 1,300 mm, approx. 640 kg  ...

turning diameter: 16 mm turning length: 145 mm control: Sinumerik 828 D number of spindle speeds: 15000 gripping station: 16 spindle speed:: 15000 load magazine: ILS-MUK Breuninger Irco high-pressure pump: Knoll total power requirement: 13 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: 2.1 x 1.1 x 1.9 mm Turn-mill centre for highest precision Benzinger DoLittle B3, year of construction 2011 - Dolittle B3 main and counter spindle with linear tool design Technical data - Travel X1-axis 320mm - Travel Z1-axis 145mm - Travel Z2-axis 90mm - Y-axis travel 80mm - 2x C-axis - Rapid traverse speeds X/Y/Z 30 m/min - Water-cooled motor spindle 16 mm, 15.000 1/min - BENZINGER Linear tool carrier system - Swivelling NC axis with driven tool Accessories: High pressure pump Knoll Cooling system Hydra Suction channel Tool holder, collets The data for this ad was created with Modu ...

Extrusion line model FCL 21/SH PRO-CAST Dolce with refrigeration equipment Brand (model): FCL 21 / SH PRO-CAST Dolce with refrigeration equipment No. 1 Release year: 2004 Manufacturer: BIELLONI CASTELLO s.p.a., Italy Three-layer cast extrusion line for the production of stretch film, made in Italy. Commissioning - 2005. The maximum real productivity is up to 800 kg/h depending on the thickness of the produced film. The winding speed of finished products is up to 350 m/min. Film thickness from 15 to 50 microns. Web width 1800 -2000 mm. Width of rolls of finished products from 125 mm. The structure of the produced film is A/B/C, the ratio of layers is 16/68/16. The composition of the line: three extruders are included, each of which works on one layer of film. Three Doteco dispensers are installed on each of the extruders, which allows mixing up to three components in each l ...

capacity 250 kg

3 boilers 1 ton -2 rest -1 mixer 2 boilers, 2 tons - 1 rest - with 1 mixer double sided label machine Filling machine between 20-400 ml

Description: Including DURACRAFT fan Approx. Onsite Dimension. (l x w x h): 400 x 450 x 800 mm, weight approx.: 40 kg

Key data: 43 mm, 4500 1/min

CNC lathe by GDW 300CS learning TECHNICAL SPECIFICATIONS: Year: 2005 Number of axes: 2 X-axis stroke: 170 [mm] Z-axis stroke: 650 [mm] X-axis fast forward speed: 6000 [mm/min] Z-axis fast forward speed: 6000 [mm/min] X-axis working speed: 0 - 5000 [mm/min] Z-axis working speed: 0 - 5000 [mm/min] Peak distance: 650 [mm] Peak height: 150 [mm] Diameter allowed above bench: 300 [mm] Permissible diameter above trolley: 160 [mm] Pin nose: DIN 55027 size 5 Spindle passage diameter: 43 [mm] Maximum diameter. Spindle passage in front bearing: 70 [mm] Maximum speed. Pin: 4500 [rpm] Pin power: 5.5 [kW] Pin torque: 58 [Nm] Cone: Morse 3 Stroke sheath against doll: 110 [mm] Diameter against doll sheath: 50 [mm] Touch screen: Yes Maximum weight. eligible interpikes: 100 [kg] Watering tray capacity: 20 [l] Watering pump flow: 30 [l/min] Rated current: 35 [A] Supply volta ...

Maker: SUMITOMO HEAVY INDUSTRIES (made in Japan) Model: FPA-3000 Year: 1985 (2) Capacity & main specification 1) Capacity: 3000tf 2) Ability Limit Point: 5mm 3) Allowable eccentric load: 3000tf 4) Allowable eccentric distance: L&R 350mm 5) Slide stroke: 350mm 6) Slide stroke speed: 20~50spm 7) Stroke number: 20tpm(Max) 8) Shut height: 1200mm 9) Slide adjust distance: 10mm 10) Bed hard plate dimensions: RL 1300mm x FB 1500mm 11) Slide dimensions: RL 1200mm x FB 1400mm 12) Slide knockout capacity: Total 20tf (pin number: 4ea) 13) SKO stroke: 50mm ( adjust up) 40mm ( adjust down) 14) Bottom knockout capacity: 50tf (pin number 4ea) 15) BKO stroke: 20~30mm 16) Upright internal dimensions: RL 1400mm 17) Main motor: DC 200kw x 1450rpm 440V 18) Floor height: 6800mm 19) Working height: 1030mm 20) Side opening: FB 1000mm x TB 1400mm 21) Flywheel energy: 200tf-m (50spm)  ...

We offer you Dölco insulation dryers + accessories from a current recycling. Year of construction 2022  Accessories: Hycon 100 moisture meter, Dölco silencer SDM, Fotric 323 M thermal imaging camera, leak detection set Condition: Original price:  Asset Manager: Birgit Heinemann Phone: 0202 257273153 Mail: b.heinemannakf.de We will be happy to provide you with details upon request. Location: 89257 Illertissen The sale is without warranty Subject to prior sale

1 x 6 Naturkorker Bertolaso, type: Delta 506R, 1994, li-re, performance: approx. 8,000 bottles / h, format parts: 1.0 ltr.,. Price: 7.900,-plus VAT from stock Dolgesheim

1 x centrifugal pump ABB motors, used, type: M2AA180 M4 / IEC 180 M / L, 18 KW, flange connections, power approximately 100,000 ltr. / h, picture on the right, POS. 9, price: 1,200 1 x used centrifugal pump Hilge, type: HYGIA S-II / 20 d, 15 KW, connections DN 80/65, capacity approx. 80,000 ltr. / h, pictured left, POS. 10, price: 2.250,- Prices plus 19% VAT from stock Dolgesheim

25 x 850 ltr. VA2 transport tank, used, some standing, stackable, DOM above 400 mm, rest outlet with valve NW 50, operating pressure 1 bar, test pressure 1,5 bar, pressure relief valve in the lid, waterproof Druckbeständig for E.g. overlay with CO2 or CO2, weight/PCs.: 130 kg, inside cleaned, very stable design, diameter: 1 m, H:/1.52 m, price: â?¬850 plus VAT from stock Dolgesheim

Numer katalogowy 6349 DANE TECHNICZNE - max szerokość obrabianego elementu 250mm - max wysokość obrabianego elementu 110mm 2 agregaty szlifujące: górny i dolny z góry: - 2 rolki dociskowe poślizgowe - agregat szlifujący 2 walce metalowe + trzewik - rolka dociskowa poślizgowa - taśma gumowa ciągnąca – VACUM z dołu: - taśma ciągnąca - 2 rolki poślizgowe, metalowe - agregat szlifujący 2 walce metalowe + trzewik - 3 rolki wyprowadzające ciągnące, metalowe - czyszczenie papieru przy agregacie górnym i dolnym - elektrycznie ustawiana wysokości szlifowania - oscylacja taśm szlifujących - płynna regulacja prędkości posuwu na falowniku - silniki główne 2×5,5kW - zapotrzebowanie powietrza 8bar - średnica króćców odciągu 4x100mm - wymiary całkowite dł/szer/wys 1400x1200x1850/2250mm - waga 1490kg – do krótkich ele ...

20x 800 ltr. VA2 transport tank, used, round standing, stackable, dome top 400 mm, residual outlet with disc valve NW 80, operating pressure 2 bar, test overpressure 3.4 bar, overpressure valve in the lid, pressure resistant for e.g. overlay with CO2 or CO2 impregnation, weight/h: 130 kg, cleaned inside, pressure-tested, very stable design, diameter: 1 m, H: 1.60 m, Price/pc: 940,- â?¬ plus VAT from dolgesheim warehouse

25x 250 ltr. VA2 transport tanks / transport containers, slightly pressure-resistant, manufacturer: Umformtechnik Hausach, used, round standing, stackable (only empty recommended), dom above NW 125 with safety valve system Stöklin + 2x CO2 valve large NW 40 + small NW 25 system Stöklin, residual outlet with disc valve NW 50, operating pressure 0.9 bar, test overpressure 2 bar, pressure resistant for e.B. overlay with CO2 or CO2 impregnate, ideal also for refilling barriques, Weight/h.: 57 kg, cleaned inside, very stable design, can be driven under with pallet truck or e-ant Diameter: 0.62 m, H: 1.50 m, Price/hour: 550,- € plus VAT ex warehouse Dolgesheim

NEW! flaker for frozen products (fish, meat, vegetables, etc...) electric power : 18,5 kW speed of the cutting drum : 112 rpm dimensions of the machine (l x w x h) : ± 2.950 x 1.600 x 1.780 mm product temperature : max. – 30°C opening/closing lid: pneumatic "Festo" 6 bar capacity : ± 7.000 kg/h for blocks of max. ± 810 x 650 x 350 mm number of knives: 7 pieces various cut sizes possible (1 set of high knives is included): • low knives : 3, 6, 9 mm • high knives : 14, 17, 20 mm discharging possible in Dolav boxes 3 x 400 V, 50Hz weight : 1.860 kg

Mobile sawmill Fähe MSV1.1, YOC 2023 - Trunk length: 3 m - Stem diameter: depending on the length of the blade - Saw option: electric saw, chainsaw - Original supports: 2 pieces - Material: Steel - Surface: powder-coated - Machine weight: 30 kg - Space requirements (W x D x H): 1.2 x 3.0 x 1.4 m Details Mobile sawmills for chainsaws from Stihl, Husqvarna, Dolmar and many other manufacturers. Easy to set up: The sawmill can be set up quickly and easily with a 2-part ladder. The two ladders are screwed to 2 or more cantilevers with wood screws. Please check the ladder dimensions to make sure everything fits. For the assembly you need 4 x 10 x 10 x 60 cm and 2 x 10 x 10 x 120 cm squared timbers (for 2 trunk supports). If you want to saw over 3 m, we recommend another log support. Accessories optional: additional master supports

Used stainless steel ribbon mixer with a capacity of 3000 LTR by MŁYNPOL model MP-3000. Device for food applications. It has a main agitator and 2 high-speed shredders on the sides. Product loading from the top. Central bottom discharge. Main engine 22 kW. Mixing time 4-5 minutes. Emptying time: 30-60 seconds. Emptying accuracy 99.5%. Rotation of internal mixers (shredders): 920 RPM. Working temperature: -5C to +45C. The device is suitable for the following applications: - spices - sugar, starch - coffee - salt - powder concentrates for the production of ice cream and waffles - powdered sugar, sugar with additives - coffee Tea - cereals - dried fruits - casein - powdered milk - detergents - gypsum, talc - dolomite, cellulose - pharmaceuticals and chemicals - other Dimensions: 5100mm x 1340mm x 1950mm (L x W x H). The device worked on ...

Infeed: approx. 1,300 x 800 mm (50"x26"), feed hopper 7 m³ with vibrating transducer, active pre-screen, CAT C9 with 350 hp, side and main discharge belt, magnetic belt, 4-axis transport dolly, total weight: approx. 58 t.

Overview The semi-automatic KEG filler was built in 2017 by the German company m+f KEG-Technik and fills 50-60 KEGs/ h into various containers. It is still in operation and can be inspected.  Technical data Capacity: 50-60 KEG/h Formats: 20l, 30l  Containers: KeyKeg, Dolium-KEG, PETainer, KEG  Filling head made of stainless steel  Pressure control by pressure switch (controls hot water and steam pressures for flushing the filling head) Sight glass for product feed line Dimensions (LxWxH): 1.150mm x 800mm x 2.150mm ±50 Control: Siemens S7  More pictures, videos and technical documentation available on request

Low voltage relay, varimeter E. DOLD & SÖHNE AA9043.12 220 / 380 V 3AC 50 / 60 Hz contact power: 250 V AC, 3 A used ! Dimensions: 80 x 45 x 120 mm

Phase Monitor E. DOLD & SÖHNE BD9080.12 0045382 Input 1: 400 V 3AC, 50 / 60 Hz Input 2: 230 V 1AC, 50 / 60 Hz Contact power 1: 230 V AC, 3 A contact power 2: 230 V AC, 1 A used ! Dimensions: 75 x 45 x 125 mm

Phase sequence relay E. DOLD & SÖHNE BA 9041 ( BA9041 ) 0026355 230 / 380 V used, tested ! Dimensions: 120 x 75 x 45 mm

Time relay E. DOLD ML9903.81 15 - 300 seconds Supply voltage: 220 V AC, 50 - 60 Hz Switching capacity: 250 V AC, 3 A spare part for wood sanding machine PAUL ERNST KKB/K VBS1300x2500 ! used ! Dimensions: 81 x 23 x 100 mm

Lampentester E. DOLD & SÖHNE AI 990/03 ( AI990/03 ) 0002061 unused ! Dimensions: 85 x 45 x 120 mm

On and inclusive transport dolly with accessory

On and inclusive transport dolly with accessory