dmc 60 used for sale

pneumatic cylinder, flat cylinder, pneumatic drive, piston, flat cylinder -Manufacturer: Festo, flat cylinder type DZH-50-600 PPV-A -stroke: 600 mm -Piston rod: Ø 20 mm / M16 x 1.5 -Pmax: 10 bar -Quantity: 2 pieces -Price: per piece -Dimensions: 780/145/H50 mm -Weight: 7.4 kg/piece

-Stainless steel tin trolley for Miwe Rollin 60x60 rotary oven -with 18 editions -optionally with sheets

Thermo shrink tunnel BECK type HV 601HPLS - Used equipment built in 2008 The high-performance shrink tunnel is built in an energy-saving design. He is from the The heating system and the adjustment options are designed so variably that they can be covered with foil. coated products of various contours can be shrunk cleanly. Functioning: The thermal shrink tunnel works with separate blowers to create a separately adjustable top and bottom heat. The special insulation technology reduces heat loss by radiating heat, reduces the power consumption by up to 20% and thus increases the Efficiency of the machine considerably. The shrink temperature is controlled by a digital control and precisely maintained even at high throughputs. The heating units at the top and bottom are removable; the thermal shrink tunnel is in case of maintenance available again after a few minutes. The ...

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: Conveyor belt conveyor belt unused -Width: 140 mm -Length: 6 m -Transport dimensions: Ø 660 x 140 mm -Weight: 5.9 kg

- Coated steel tanks - Vertical, on concrete base Dimensions : - Depth : 1400 mm - Width : 3100 mm - Height: 1800 mm Equipment : - Rectangular manhole 320 x 420 mm, offset to the side - Partial discharge, flap valve, DN 40, Friedrich no. 2 - Residual discharge, flap valve, DN 40, Friedrich no. 2 - Level indicator - Aeration and deaeration, DN 40, Friedrich no. 2

Skin pass machine Biscuit machine Krumbein DSM 600 LIV - Skin pass machine Dropin - 600cm bandwidth - Year of construction 2005 - mobile on wheels

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Conveyor belt: Conveyor belt, transport belt, unused -Width: 140 mm -Length: 6 m -Dimensions: Ø 240 x 145 mm -Weight: 3.2 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders, lifting power jacks -Manufacturer: Milwaukee, double-acting hydraulic cylinder stroke 600 mm -Type: H-73 -Piston rod: Ø 16 mm -Holes: Ø 25 mm / Ø 18 mm -Dimensions: 885/220/H180 mm -Weight: 16.3 kg

We offer a complete set of original Kellenberger documents , for increasing the tip height by 50 mm. These are ground to a height. The overall picture shows the condition of the documents before post-processing

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 2,550 mm Number of fields per row of shelves: 01 pcs. á 2,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 02x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 04x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) clear width: 2,400 mm 02x chipboard second choice, used Thickness: 22 mm Dimensions: 2,380 x 800 mm ...

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 7,500 mm Number of fields per row of shelves: 03 pcs. á 2,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 04x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 12x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) clear width: 2,400 mm 06x chipboard II choice, used Thickness: 22 mm Dimensions: 2,380 x 800 mm Su ...

Try square, locksmithsquare, hair square, precision hair square -Stop angle: leg length 600 x 300 mm -Dimensions: 605/300/H40 mm -Weight: 2.8 kg

Storage containers, transport storage containers, long goods racks, long goods pallets -Long goods frame: Stackable long goods pallet, length 6280 mm -Crane eyes: 4 pieces -Number: 7x long goods rack available -Price: per piece -Dimensions: 6280/640/H550 mm -Weight: 162 kg/piece

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 2,550 mm Number of fields per row of shelves: 01 pcs. á 2,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 02x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 04x pallet racking trusses, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) clear width: 2,400 mm 08x locking pins, used Execution: compl. galvanized For securing the longit ...

Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers -Machine transport roller: armored roller type GS-6000T -Load capacity: 6000 kg -Dimensions: 395/230/H100 mm -Weight: 12.9 kg -only 1 piece available

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 9,975 mm Number of fields per row of shelves: 04 pcs. á 2,400 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 05x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 16x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) clear width: 2,400 mm 32x locking pins, used Execution: compl. galvanized For securing the longitud ...

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 600 mm -Length: 5.4 m -Transport dimensions: Ø 150 x 600 mm -Weight: 6.7 kg

Machine overhaul , Repairs , On-site maintenance at the user's site , Spare parts supply , We specialize in the overhaul and repair of Kellenberger and Strausak universal grinding machines. We have the production and license rights of the company Strausak for the Type 57 U / W the resulting Special machines 82 S , multi-spindle fine milling machines, as well as CNC machines built from type 57 U / W We manufacture special machines especially for the ceramics and carbide industry.

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 5,025 mm Number of fields per row of shelves: 02 pcs. á 2,400 mm Number of levels plus ground level: 04 pcs. The scope of delivery includes: 03x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 16x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: ASM50-CES80|40|1.5 Design: Stepped traverse Agraffe: 5 HK (hook) clear width: 2,400 mm 08x chipboard second choice, used Thickness: 22 mm  ...

Technical data for the pallet racking system: Shewing system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 2,550 mm Number of fields per row of shelves: 01 pcs. á 2,400 mm Number of levels plus ground level: 04 pcs. The scope of delivery includes: 02x pallet rack stand, used Material color: sendzimir galvanized Material colour base plates: RAL 5010 gentian blue Stand type: P73 Stand profile: 75 x 75 x 2.00 mm Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 1,900 mm high 800 mm deep 08x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: ASM50-CES80|40|1.5 Design: Stepped traverse Agraffe: 5 HK (hook) clear width: 2,400 mm 04x chipboard II choice, used Thickness: 22 mm Dim ...

Conveyor belt, belt conveyor, metal conveyor belt, wire belt, link belt, round wire link belt, wire eyelet link belt, wire eyelet link belt -Conveyor belt: round wire link belt stainless steel -Width: 600 mm -Length: 3.0 m -Transport dimensions: Ø 110 x 600 mm -Weight: 4.2 kg

Gratings, grating, light grids, insert grids, insert grids, stair treads, safety steps, grating step, step, safety step, perforated sheet step -Grating step: safety step perforated sheet step hot-dip galvanized -Type: ID 600x200x45 mm -Number: 6x grates available -Price: per piece -Weight: 3.3 kg/piece

Try square, locksmith square, hair square, precision hair square, control square -Manufacturer: Hommel, stop angle DIN 875/0 -Type: 600 x 400 mm -Accuracy level: 0 -Dimensions: 615/400/55 mm -Weight: 6.6 kg

Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -Clamping plate: punching table for hydraulic press, eccentric press -Clamping surface: 700 x 600 mm -Opening: 250/250 mm -Plate height: 205 mm -Dimensions total: 700/600/H205 mm -Weight: 207 kg

Electromagnet with large depth action for extracting ferrous parts from a material stream, oil-cooled design. Including control cabinet with 22 V DC power supply (type: 312-220/20, for connection to 400 V / 50-60 Hz) and overhead duo-rail installation (ca. 4.5 m long x 2.5 m high) for moving the magnet. By switching off the magnet above the drop point attracted ferrous parts are removed.

Horizontal cartoner, packaging machine -Manufacturer: nomatech, conveyor belt from packaging machine/cartoner BOX 60H -Type: BOX 60H -Band width: 230 mm -Shipping/Price: complete -Dimensions: 3330/600/H730 mm -Weight: 264 kg

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool, clamp press tool, upper tool -Die tool: Forming tool / Press tool -Length: 600 mm -Dimensions: see photos -Overall dimensions: 600/85/H115 mm -Weight: 40.6 kg

Reciprocating saw, dovetail saw, tiger saw, saber saw -Manufacturer: Flex, reciprocating saw with carrying case -Type: SK 602 VE -Nominal power input: 1000 W -Stroke rate: 800 - 2400 /min -Dimensions: 620/260/H110 mm -Weight: 9 kg

Technical data for the pallet rack traverse: Shewing system: SSI Schaefer Type: PR600 The scope of delivery includes: 01x pallet rack traverse, new (second choice) Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: ASM50-CES80|40|1.5 Design: Stepped traverse for panel thickness: 22 mm Agraffe: 5 HK (hook) 2,400 mm clear width 02x locking pins, new Execution: compl. galvanized For securing the longitudinal members against unintentional lifting

Reciprocating saw, dovetail saw, tiger saw, saber saw -Manufacturer: Flex, reciprocating saw with carrying case -Type: SK ZSK 602 E -Nominal power input: 1000 W -Stroke rate: 700 - 2400 /min -Dimensions: 620/260/H110 mm -Weight: 8.6 kg

Sensor module, incremental encoder, encoder relay unit, encoder unit, signal converter -Manufacturer: Heidenhain, Encoder Unit -Type: EXE 605S/005-F -ID No.: 2 322-08 -Dimensions: 300/120/H55 mm -Weight: 0.8 kg

Technical data for the pallet rack traverse: Shewing system: SSI Schaefer Type: PR600 The scope of delivery includes: 01x pallet rack traverse, new Material colour: RAL 7035 light grey Box profile: 80 x 40 mm Truss type: TRV1-240-084-30CE Agraffe: 5 HK (hook) 2,400 mm clear width 02x locking pins, new Execution: compl. galvanized For securing the longitudinal members against unintentional lifting

Containers, granule containers, storage tanks, powder containers, paint powder containers -Container: Granule container -Material: Stainless steel tank -Dimensions: see photo technical drawing -Number: 2 containers available -Price: per piece -Dimensions: 605/605/H1160 mm -Weight: 28 kg/pc.

Containers, granule containers, storage tanks, powder containers, paint powder containers -Container: Granule container -Material: Stainless steel tank -Dimensions: see photo technical drawing -Number: 2 containers available -Price: per piece -Dimensions: 605/605/H1160 mm -Weight: 28 kg/pc.

Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires, steel rims, rims -Manufacturer: Mefro, 4-hole steel rim -Type: 3.00D-8 ET-10 603663 -Hub bore: Ø 60 mm -Bolt circle: Ø 100 x 16 mm -Quantity: 1x rim available -Dimensions: Ø 240 x 105 mm -Weight: 3.4 kg

Jeros 6015 TRAY CLEANING MACHINES

Refer to code 1056 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

ENGEL INSERT 60H/30 SHUTTLE injection moulding machine was manufactured in 2016 in Austria. A specialised machine with a small footprint, is used for, among others, the overmoulding of inserts and the joining of various materials such as glass, metal and electronics. Thanks to the electric control of the injection unit and the ‘pressure locking’ system for the injection cylinders, the injection moulding machine guarantees high repeatability and excellent quality of inserts. The ENGEL INSERT 30 injection moulding machine allows you to set the speed and clamping force to prevent damage to the mould. Once both mould halves are closed and a high closing force is generated, the injection unit pushes the nozzle against the injection sleeve of the mould and produces an adjustable clamping force. At the end of the cycle, a very powerful screw with a diameter of 18 mm injects the melt unde ...

Roller conveyor, conveyor belt, roller track -Manufacturer: Soco System, non-powered roller conveyor, 2-section, 2.0/2.0 m, height adjustable -Track width: 600 mm -Rollers: Ø 48x15 mm -Price/Fee: complete -Dimensions: 2000/820/H720 mm / 2000/670/H650 mm -Weight: 150 kg

Food shelf, kitchen shelf, catering shelf, baking tray shelf -Dimensions: 600/5500/H1450 mm -Shelf spacing: 190 mm -Intermediate dimension: 485 mm -Material: Stainless steel -Weight: 42 kg

Hydraulic power unit, hydraulic pump, hydraulic pump -Max. pressure: 100 bar -Liter flow rate: 6 l/min -Hydraulic tank -Hydraulic valve -Weight: 110 kg

5.75 M LONG-SPAN SHELVING 60CM DEEP, WORKSHOP SHELVING, STORAGE SHELVING, LARGE SHELVING, MANUAL STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : ca. 5,76 m Shelf offer consisting of: 04 x frame approx. 200 x 60 cm, disassembled. 24 x truss approx. 185 cm. 12 x support base approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 620,00 € Net plus statutory VAT. You will receive an invoice with VAT.

7.65 M LONG-SPAN RACKS 60CM DEEP, WORKSHOP RACKS, STORAGE RACKS, LARGE SHELVING, HAND STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : approx. 7.66 m Shelf offer consisting of: 05 x frame approx. 200 x 60 cm, disassembled. 32 x truss approx. 185 cm. 16 x support shelf approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 815,00 € Net plus statutory VAT. You will receive an invoice with VAT.

11.45 M WIDE SPAN RACKS 60CM DEEP, WORKSHOP RACKS, STORAGE RACKS, LARGE SHELVING, MANUAL STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : approx. 11.46 m Shelf offer consisting of: 07 x frame approx. 200 x 60 cm, disassembled. 48 x truss approx. 185 cm. 24 x support base approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 1205,00 € Net plus statutory VAT. You will receive an invoice with VAT.

13.36 M LONG-SPAN RACKS 60CM DEEP, WORKSHOP RACKS, STORAGE RACKS, LARGE SHELVING, MANUAL STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : ca. 13,36 rm Shelf offer consisting of: 08 x frame approx. 200 x 60 cm, disassembled. 56 x truss approx. 185 cm. 28 x support shelf approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 1400,00 € Net plus statutory VAT. You will receive an invoice with VAT.

Filling machine for filling and closing liquids in corresponding bottles. Dosing volume: approx. 50-500 ml. 4-digit machine incl. 6 format parts, infeed turntable, Johnson pump, spare parts etc.

Universal milling machine Speed 90 - 2000 rpm x 650 mm Y 300 mm Z 400 mm Feed rate in x electric Coolant pump Accessories Weight 1 ton

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 200 V -Hole diameter: 16 mm -Weight: 5 kg

Pipe welding accessories, forming gas welding equipment, forming gas welding aid -Diameter: 600 mm -Rubber sealing lip -with transport rollers for disassembly from the pipe to be welded -Dimensions: 650 x 450 mm -Weight: 18 kg

continuous grilling line all stainless steel with lower and upper belt : bottom and top heating temperature of the belts is separately adjustable nett length 1800 mm belt width 600 mm electrically heated 93 kW belt washing system temperature from 50 up to 260°C grilling time 0,3 – 3 m/min adjustable speed