dividing head used for sale

ID2487 Eurodrill CDH 2400 year/Year of construction 2008 1.4 t Double-head drilling rigs, ready for use, little used (approx. 500 hours) Double-head drilling rig, ready for use, little used (approx. 500 hours)

- Output: max. 3000 bts/h - With cork presence control, at the inlet - Cork dust blow-off onto bottle - With caps dispenser - With shrink head - Direction of rotation: left - right - Machine completely overhauled - Machine in very good condition

diameter range 3-6mm shaft length under head 12-40 mm cutting length 50 mm output pieces/min 260

diameter range 6 mm shaft length under head 50 mm max. cutting length 70 mm output- piece/min 125

bushing cut-off diameter range 8,5 mm number of dies 2 number of stations (incl. cut off) 3 cutting length 100 mm shaft length under head 80 mm output - pieces/min 300 press power 30 t

bushing cut-off diameter range 14 mm number of dies 2 number of stations (incl. cut off) 4 cutting length 100 mm shaft length under head 90 mm output - pieces/min 100 press power 120 to

bushing cut-off diameter range 8-16 mm number of dies 2 number of stations (incl. cut off) 4 cutting length 160 mm shaft length under head 130 mm output - pieces/min 100

diameter range 2-4 mm shaft length under head 100 mm max. cutting length 117 mm output- piece/min 110

diameter range 4-8 mm shaft length under head 165 mm cutting length 200 mm output pieces/min 100

diameter range 3-6 mm shaft length under head 6-60 mm max. cutting length 75 mm output- piece/min 180

diameter range 8-18 mm shaft length under head 180 mm max. cut-off length 220 mm output - pieces/min 70

diameter range 5-10 mm shaft length under head 10-150 mm max. cut-off length 180 mm output pieces/min 100

diameter range 4-8mm shaft length under head 40mm max. cut-off length 71mm output pieces/min 250 press power 30 t

bushing cut-off diameter range 14-22 mm number of dies 7 number of stations 8 cutting length 4-67 mm shaft length under head 4-75 mm output - pieces/min 175 press power 200(126) to max. outside dia. of round pie 42 mm

bushing cut-off diameter range 6,5 mm number of dies 8 number of stations (incl. cut off) 9 cutting length 6-10 mm output - pieces/min 150

bushing cut-off diameter range 7-15 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 10-160 mm shaft length under head 15-130 mm output - pieces/min 130 press power 150 to

diameter range 12 mm number of dies 4 number of stations 5 cutting length 100 mm shaft length under head 80 mm output - pieces/min 125 press power 65 to

diameter range 10- 18 mm number of dies 4 number of stations 5 cutting length 155 mm shaft length under head 125 mm output - pieces/min 90 press power 200 to max diameter of the head 35 mm

bushing cut-off diameter range 16-30 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 235 mm shaft length under head 180 mm output - pieces/min 90 press power 380 to

bushing cut-off diameter range 2-6 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 95 mm shaft length under head 75 mm output - pieces/min 80-200

bushing cut-off diameter range 14 mm number of dies 4 number of stations (incl. cut off) 5 output - pieces/min 200 shaft length under head 90 mm cutting length 127 mm

bushing cut-off diameter range 10,5 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 85 mm shaft length under head 65 mm output - pieces/min 275 press power 65 to

bushing cut-off diameter range 10-26 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 220 mm shaft length under head 165 mm output - pieces/min 35-70 press power 380 to

diameter range 3-8,5mm number of dies 2 number of stations (incl. cut off) 4 output - pieces/min 250 shaft length under head 55 mm cutting length 60 mm

diameter range 10 mm number of dies 2 number of stations (incl. cut off) 4 output - pieces/min 60-100 stroke 100 mm

bushing cut-off diameter range 6 mm number of dies 2 number of stations (incl. cut off) 4 cutting length 65 mm shaft length under head 55 mm output - pieces/min 200 press power 250kN

bushing cut-off diameter range 6-14 mm number of dies 4 number of stations (incl. cut off) 5 cutting length 300 mm shaft length under head 260 mm output - pieces/min 40-60

diameter range 3,8 - 6,5 number of dies 4 number of stations 5 cutting length 52 mm shaft length under head 6-35 mm output - pieces/min 250 press power 55 ton

with PKO diameter range 8 mm number of dies 3 number of stations (incl. cut off) 4 cutting length 70 mm shaft length under head 60 mm output - pieces/min 300

bushing cut-off diameter range 8,5 mm number of dies 2 number of stations 4 cutting length 55 mm shaft length under head 55 mm output - pieces/min 200 press power 30 to

Angle Milling Head, Angle Head, Milling Head, Drill Head WMW, WERKZEUGBAU DOBERSCHAU App. 252 Tool holder: MK2 1 spindle stroke: 35 mm drive plate: Ø 72 mm, 2x drive groove, width: 16 mm flange: Ø 146 / 100 mm bolt circle diameter: Ø 120 mm hole diameter: Ø 13.5 mm accessories for RUHLA milling machine used, tested ! Dimensions: 295 x 145 x 135 mm

semi tubular rivets diameter range 5 mm shaft length under head 40 mm max. cut-off length 60 mm output pieces/min 470

diameter range 0,8-3,0 mm cutting length 30 mm shaft length under head 25 mm output - pieces/min 600

bushing cut-off diameter range 22 mm number of dies 4 number of stations (incl. cut off) 5 output - pieces/min 105 shaft length under head 155 mm cutting length 175 mm press power 250 to

diameter range 3-6,35 mm shaft length under head 60 mm cutting length 84 mm output pieces/min 300

diameter range 2-6 mm shaft length under head 40 mm max. cutting length 60 mm output- piece/min 400

diameter range 3-6,5mm shaft length under head 8-75 mm max. cut-off length 100 mm output pieces/min 150

bushing cut-off diameter range 23 mm number of dies 4 number of stations (incl. cut off) 4 cutting length 270 mm output - pieces/min 100 press power 265 to

bushing cut-off diameter range 3-8,5 mm number of dies 2 number of stations 4 cutting length 55 mm shaft length under head 55 mm output - pieces/min 200 press power 30 to

Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron UME 600 -Motor: Siemens 380V 3.7/5.25 kW see photo nameplate -Speed: 1500/9000 rpm -Spindle head: SK40 mount -Dimensions: 1550/560/H735 mm -Weight: 555 kg

1 SULZER VAUPEL label rapier loom type G6500 S150 N8 J and EWM 80-135E, year 2006, weaving width 126 cm, STÄUBLI electronic jacquard type DX110, STÄUBLI JC6 controller, VAUPEL control type MCD-3, machine supplied with 8 IRO Stella G2 weft feeders

1 SULZER VAUPEL label rapier loom type G6500 S190 N8 J and EWM 80-175E, year 2008, weaving width 168 cm, BONAS electronic jacquard type ZL 2L-24, 2304 hooks, BONAS Series 800 controller, VAUPEL control type MCD-3, machine supplied with 8 IRO Stella G2 weft feeders

Milling head, drill head, angle head WMW Tool holder: SK40 with collet chuck size 25 360 ° rotatable in two planes shaft ( Drive , machine side ): SK50 shaft ( drive, milling head side ): Wedge hub profile 8 x 36 x 42 x 8 ( TGL 0-5472 ) flange: Ø 260 mm / 397 x 339 mm hole spacing: 365 / 175 mm 4x Bore: Ø 19 mm used, tested ! Dimensions: 400 x 390 x 600 mm

Drill head, boring head, spindle head KOMET ABS® 50 A50 00350 mounting: SK50 drilling diameter: Ø 50 - 70 mm drilling depth: max.170 mm used, tested ! Dimensions: 296 x 98 x 98 mm

Drill head, boring head, spindle head KOMET ABS® 503 AKK 196403 mount: SK50 drilling diameter: Ø Ø 39 - 53 mm mm drilling depth: max.150 mm used, tested ! Dimensions: 290 x 98 x 98 mm

Doppelkopfheftmaschine fuer Broschueren - Block Booklet & Block Stitcher Nagel Multinak-S (18086) fuer Block- und Sattelheftung / flat and saddle stapling Heftkoepfe AS: fuer Blocks bis 15 mm (Heftkoepfe BS bis 27 mm optional) / stapling head AS: blocks and brochures up to 15 mm (stapling head BS: blocks up to 27 mm optional) Heftkopfabstand verstellbar im Bereich von 80 - 155 mm / distance adjustable between 80-155 mm Heftklammernlaenge: 6 - 30mm / staples arm length: 6-30mm Heftklammernsorten: 24, 26, 50 + Ringklammern / for staples no. 24, 26, 50 and ring staples flaches Anlegen der Heftklammern durch bewegliche Umbieger / moveable bending tools ensure that staples lay flat einfaches Kippen des Arbeitstisches ermoeglicht schnellen Wechsel von Block- auf Broschuerenheftung / change-over from flat to saddle stapling is made by simply flicking over the table Maschine ist fuer Dauerbe ...

Adressiersystem - 2 Adressierkoepfe - Adress Printing System - 2 adressing heads Buskro BK700 Year 2001 - Serial-No. 700HUK1001047 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Twin-headed Stapler Nagel Mulinak Sitcher Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

2-head spindle paper drilling OMM Venus Year 2002 Serial-No. 13121 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

1-Spindel-Papierbohrmaschine - 1-head spindle paper drilling Nagel Citiborma 150 Serial-No. 7404 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-