dimeco 1645 used for sale

material width:500 mm material thickness:0,6 - 1,6 mm no. of straightening rolls:7 straightening roll diameter:60 mm number of draw-in rolls:2 + 2 inlet roll diameter:60 mm max. material thickness:2,0 mm material thickness at 150 mm material width:2,0 mm material thickness at 500 mm material width:1,6 mm weight:0,5 t dimensions (WxDxH):0,8 x 1,0 x 1,2 m

material width:550 mm material thickness:0,4 - 1,6 mm no. of straightening rolls:11 straightening roll diameter:60 mm number of draw-in rolls:4 diameter of draw-in rolls:60 mm band speed:4 - 50 m/min power capacity:3,0 kW weight:1,7 t Dimensions (WxDxH):2,5 x 2,0 x 1,7 m

3-armed; Max. load (2x) 1250 kg; Max. belt width / working width 305 mm; clamping range 375 to 520 mm; Max. coil diameter 1300 mm; v.v. (2x) control; Electrical/Pneumatic-Hydraulic

Size: L 1700 x W 1600 x H 1750mm

Max. working width approx. 195 mm; v.v. (7x) straightening rollers; (4x) transport rollers; rollers diameter 80 mm; Supply table dim. approx. 900x400 mm; v.v. control box and control cabinet; electric/pneumatic; incl. loop control device

Max. working width / belt width 210 mm; minus. thickness 0.2 mm; Max. thickness 3 mm; Max. roll Ø 80 mm; v.v. supply roller conveyor; Length approx. 700 mm

Working width max. 300mm

sheet width - max.: 750-900 mm coil weight: 3,50 - 4,00 t coil internal dia.: 400 - 500 mm coil outside - diam. ca.: 1500 mm total power requirement: kW weight of the machine ca.: 1,90 t dimensions of the machine ca.: 1,50 x 1,90 x 2,30 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 0400 mm coil outside dia.: 1400 mm weight max. in kg: 3000 kg plate thickness: 0,80 - 4,50 mm nomb. of straightening rolls: 7 diam. of the rolls ca.: 80 mm feed rolls: 2 exit pinch rolls: 2 coil width: 600 mm range of expansion ca.: 470 - 530 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler DIMECO type 2371 E-FPS Year of construction 2006 with hydraulic spreading with pneumatic pressure roller from above with 6 pieces of band limiting arms Straightening machine DIMECO type 1676 C-VV Year of construction 2000 with frequency-controlled drive with hydraulic band insertion aid with support table, insertion tongue, Pressing arm from above with pneumatically ventilated roller with side belt guide rollers with pneumatically adjustable belt transfer table The data for this ad was created with ModulMWS - the software solution of  ...

material width:300 mm material thickness:0,6 - 2,5 mm no. of straightening rolls:7 straightening roll diameter:60 mm number of draw-in rolls:2 + 2 diameter of draw-in rolls:60 mm max. material thickness:3,5 mm material thickness at 30 mm material width:3,0 mm material thickness with 300 mm material width:2,5 mm weight:0,3 t Dimensions (WxDxH):0,9 x 1,0 x 1,1 m

material width:400 mm material thickness:0,6 - 2,8 mm no. of straightening rolls:5 straightening roll diameter:40 mm no. of pulling rolls:2 + 2 material thickness at 400 mm material width:1,8 mm material thickness at 65 mm material width:2,8 mm power capacity:3,0 kW weight:0,45 t Dimensions (WxDxH):0,8 x 1,8 x 1,35 m

material width coil line:600 mm coil weight:2 x 3,5 t coil internal diameter:460 - 530 mm coil external diameter:1500 mm material thickness coil line:0,5 - 3,0 mm no. of straightening rolls:7 no. of rolls at in- and outlet:4 roll diameter:80 mm feed length:0 - 500 mm power requirement:10,0 kW weight:10,0 t dimensions of the coil line:8,8 x 4,0 x 2,55 m straightening machine:Dimeco, 1676 EV double decoiler:2382 FFPS lag brake:pneumatic electronic roll feed:Microfeed

Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...

Hydraulic cylinder, double-acting BALKANCAR, HIDRAVLIKA (XUGPA) BX411 16451 50x180 ( BX4111645150x180 ) BDS7990-70 Piston diameter: Ø 50 mm Rod diameter: Ø 22 mm stroke: 180 mm Pn: 16 MPa (160 bar) Rod thread: M18 x 1.5 x 42 mm (length) rod end: Ø 20 mm spare part for e.g. BALKANCAR forklift ! unused !; Dimensions: 465 x 65 x 75 mm

Manometric thermometer MESSGERÄTEWERK BEIERFELD, EAW Type: 1645 111 310 1645 Measuring range: -20 - +80 °C Accuracy class: 1,,6 Division: 2 degrees Case diameter: Ø 160 mm Protection tube: Ø 18 mm, length: 200 mm, thread: M27 x 2,0 New, with documents ! Dimensions ( thermometer ): 380 x 160 x 160 mm Dimensions ( packaging ): 390 x 180 x 200 mm

Straightening machine make DREHER type Rima Mod. 1645 CVSerial no. A11 594/88, manufactured in 05/1989Technical specifications:Bhmx2lm3lqmax.working width: 300 mmStrip thickness min./max. : 0.4 - 1.2 mmAdjustable belt speed: 5 - 40 m / min.With- 4 pairs of rollers 40 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping, with coolant channel -Support area: 1645 x 250 / 695 x 310 mm -Wall thickness: 30/35 mm -Dimensions: 1645/310/H695 mm -Weight: 239 kg

pressure: 1645 t stroke: 1000 mm dayligth: 3000 mm Control: down speed: 280 mm/sec return speed: 275/346 mm/sec distance between columns: 2520 mm total power requirement: kW weight of the machine ca.: t the machine is in very good condition machine was overhauled new control optional you can buy a shifting table as well optional you can buy a surrogate column as well The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Center height: 0 mm Center distance: 1500 mm Spindle bore: 155 mm Make ZMM 1.000 mm Type C 13 SH Year 2001zmm draaibank drehmaschine lathe machine Centre height (mm)Swing = 1.000 Center distance (mm)DBC = 1.500 Spindle bore Bore = 155 Speeds 22 steps 1.000 Rpm 2 axis digital readou t4 chuck 1.000 mm  

Metall lathe manufactured by PINACHO type L-1/165Masch. -No: 11782Technical specifications:Tip height: 165 mmDistance between centers: 750 mmTurning diameter over bed: 330 mmTurning diameter in the crank: 480 mmSpindle bore: 42 mmSpindle mount: DIN 55022/518 spindle speeds: 30 - 2000 rpm.20 feeds: 0.047 - 0.86 mm / rev20 cross feeds: 0.021 - 0.39 mm / rev20 metric threads: 0.5 - 916 WW threads: 56 - 4 Gg / 1 20 module thread: 0.25 - 4.5 MDrive power: 2 / 3.8 HPDimensions: 1645 x 820 x 1260 mmWeight approx .: 800 kgWith- Three-jaw lathe chuck 200 mm- Multifix steel holder with multiple inserts- moving center pointused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regar ...

Double grinding machine / double grinding block make REMA type DS 30/400 AFabr. -No: 02703 with built-in extractionGrinding wheel size 400 x 40 x 127 mmGrinding wheel speed 1450 rpm.Drive power 3 hp - 2.2 kWFlow rate 10 m3Power connection 380 V, 50 HzWeight approx. 240 kgDimensions 960 x 732 x 1188 mmWith- built-in suction- Standard versionused, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Rated power up to 1500 kg/h engine power drive motor 0.55 (0.75) washing machine motor 0.12 (0.16) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2538 mm width 1463 mm He 1460 mm mm width 650 mm Band length 8120 mm application width 450 mm application shoehe 0-50 (infinite) mm Weight 1060 kg material 1.4301 / AISI 304 Juice yield up to 75% Band speed 0.9 - 1.8 m/min Contact time 1.9 - 3.8 min Water consumption for cleaning 3 l/min Connection for waste water 75mm Connection for juice drain 2 High juice drain 400 mm Hoehe wastewater drain 210 mm Hoehe marc ejection 840 mm Supplied high pressure cleaner, compressor ; New machine - best condition

Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...

Waffle baking machine consisting of: - Leaf removal station -Control panel - Dough infusion station - Baking chamber - Burner equipment - Exhaust system with exhaust pipes - Service door - Waste scraper - Inlet conveyor -Switchboard - Waffle leaf relaxation The machine configuration is based on a wafer bread production concept. That is, wafer sheets are made and sliced. Optionally, we can add a cutting machine and a packaging machine to complete the line. The product looks and is used like a WASA crispbread, but is a waffle and much softer. Waffle bread is an interesting alternative to regular bread and not just a snack, but a real foodstuff. Height: 2450 mm Length: 16450 mm Depth: 1900 mm Baking plate format: 470 x 290 mm Pattern: Pimples Waffle sheet thickness: 4.8mm Electrical connection: 400 V/ 50 Hz Control: Siemens S 7 Baking plate heating: natural  ...

Packaging Automation Eclipse SL6 Tray Sealer High speed machine 6-tray tooling Tray size (mm): approx internal: 155 x 110; external: 170 x 123

VACUUM STUFFER WITH LOAD LIFTER, HANDTMANN TYPE: VF100B CODE: 50/55 Technical description: Serial number: 16455 Power supply: 380/440 V - 50/60Hz Power: 5,5 Kw Throughput rate: Up to 3.000 Kg/ h Dimensions: 1680 x 1300 x 2000 mm It can be combined with Portioner and sausage hanger HANDTMANN

WaterJet OMAX GlobalMAX 1530 was built in 2019 in the United States. This high-quality machine with an indestructible design uses reliable components and innovative jet cutting technology to guarantee clean and precise workpiece edges, regardless of the machined material. The OMAX water cutting machine was first commissioned in 2020 and has so far only worked for 260 hours. The GlobalMAX 1530 water cutting machine machines workpieces made of e.g. steel, glass and plastics on a large work table which maintains high stability even during the heaviest loads. The machine’s easy-to-reach design offers unobstructed access to a working area with a length of 3100 mm and a width of 1645 mm from all four sides, significantly facilitating the process of loading and unloading workpieces. All axes are equipped with innovative OMEGA DRIVE brushless servo motors with feedback loop, which minimise  ...

inductive proximity sensor TURCK Ni12U-S18-AP6X-H1141 Ident- Nr. 1645600 10 - 30 V DC 200 mA Detection range: 12 mm Thread: M18 x 1,0 Length: 36 mm Material: plastic, PBT-GF30 New, with underlays ! Dimensions ( sensor, without nut ): 52 x 18 x 18 mm

: neu : ca. 4 Monate ab Auftragse : Italien : 164500 € : 260 to : 500 mm : 1400x1000 mm : 600 mm : 75 mm/s : 5 mm/s : 60 mm/s : 22 kW : 2800 mm : 1650 mm : 2750 mm 4-pillar guide table and ram with T-slots 2 hand operation stroke adjustment pressure adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Conveyor belt, belt conveyor, conveyor belt, belt conveyor, incline conveyor, incline conveyor, chip conveyor, chip conveyor -Conveyor belt: on mobile base -Speed: 30m/min -Conveyor belt width: 115 mm -Conveyor belt length: 1625 mm, dimensions see photo techn. drawing -Height: 810 mm -Propulsion: Bonfiglioli 0.37 kW -Individual components: see photos -Total dimensions: 1645/600/H915 mm -Weight: 62 kg

Glass scale, glass measuring stick, scale, digital display, measuring stick, length measuring system, length measuring device, linear scale, position indicator, digital scales, digital scale for digital display -Manufacturer: Heidenhain, for lathes and milling machines -Type: LS 476 ML 1540 mm --Reading head: AE LS 476 -Dimensions: 1645/60/H30 mm -Weight: 2.6 kg

Die holder, cutting tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: die -Punching dimensions: 15 x 25 mm square -Dimensions: 115/115/H115 mm -Weight: 3.4 kg

Square notching tool, notching side knife, die holder, cutting tool, punching tool, punch, punching die, punching punch -Punching tool: square notching tool -Punching dimensions: 40 x 79 mm square -Dimensions: 225/145/H95 mm -Weight: 10.6 kg

Punch holder, die holder, punching tool, punch, punching die, punching punch -Matrix size: 13.7 mm -Matrix holder: for punching in the legs -Dimensions: 200/120/H90 mm -Weight: 8.7 kg

Triangular notching tool, notching side knife, die holder, parting tool, punching tool, punch, punching die, punching die -Punching Tool: Angle Notching Tool -Remark: only counter knife, without release unit -Dimensions: 185/172/H95 mm -Weight: 9.3kg

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: for holding matrices -Bore diameter: 100 mm -Dimensions: 325/335/H115 mm -Weight: 50 kg

General SKU123X722 LocationBarneveld MakePannevis TypeRT/PT 0,25 x 2 Mtr No.1645 Year of construction1994 Main Features MaterialStainless steel Motor0.25 KW Surface0.5 m2 Specified Features - Vacuum belt filter Vacuum belt filterin pressure tight housing (1x) Filter surface0,5 M2 Filter width250mm Filter length2000mm Number of sections:4 (3x 400mm + 1x 800mm) With motor0,25 KW, 230/400 Volt (Ex) With variable speed drivecheck Belt speed± 0,4-2,4 CM/S With vacuum pumpmake SIHI With liquid pumpcheck MaterialStainless steel 1.4571 (316Ti) Information With switchgear(Dim. 1,4x0,5x2,2 M - LxWxH) Floorspacefilter 4,0x2,1 M Weight8000 KG ATEX compatiblecheck Extra Specifications- Housing vac/6 bar, Test pressure 11,7 bar Vacuum belt filtersPannevisFilters > Vacuum belt filtersBrand > Pannevis What you can expect from Foeth: -- Machine is in working condition -- At  ...

The machine is in good technical condition, fully functional, possibility of testing, loading provided. Measuring Heidenhain Positip 855 including controlled axes. Machine weight: 1725 kg Table clamping area: 800x400 mm Table longitudinal movement - x-axis: 600 mm Transverse table movement - z-axis: 400 mm Vertical table movement - y-axis: 400 mm Machine dimensions d x w x h : 1830 x 1645 x 1735 mm

Used Shrink Wrapper Dimac Star F45 PACKAGING MACHINE Constructeur DIMAC Model Star F45 n A40 1462 Year of construction 2004 Parcel speed per minute max 45 Type of film 40 or 50 microns film Tray presence no Type de fonctionnement Possibility of imprimed film travailler Machine inlet type right or 90 right Divider bottles yes Hours worked 16452 12 07 Last revision Spare parts yes PLC manufacturer and model B R Voltage 400 V 50 Hz Manuals available all Security protections yes Machines still in operation yes Availability November 2017 Currently processed formats 1 5l x 6 1l x 6 0 5l x 6 Dimensions encombrement machine 11 m x 1 35 m [...for more information send your inquiry to the seller.] refno: FA23

2 working functions (stirring & beating) Infinitely variable speed control with digital speed display Process control via timer with automatic switch-off Boiler lighting 1 whisk new 1 whisk new 1 32 litre stainless steel boiler new Working shaft/agitator shaft new ümG Speeds: 120 - 600 rpm with boiler high-speed winding Connection 400V, 1.5 kW, 5.9A, with 16A CEE plug DGUV V3 tested Dimensions: 620 x 870 x 1645 mm (WxDxH) Net weight: approx. 240 kg Floor-standing machine with stainless steel platform Used machine overhauled with 6 months warranty Many more TOP slinging machines in stock!

Turning diameter: 320 mm Turning length: 530 mm Turret positions: 10 CNC Brand: Fanuc CNC latheTAKISAWA - EX-108 MACH-ID 8720 Make: TAKISAWA Type: EX-108 Control: FANUC 21i-T Year: 1999 Max. turning Ø:320mm X-Axis:        180mm Z-Axis:        530mm Spindle bore:  52mm Speedrange:    4000Rpm Spindle power: 7,5kW ATC / revolver:10 Chip conveyor: Yes Tool eye:      Yes Length:        3500mm Width:         1645mm Height:        1770mm Weight:        3500kg

In front of the EBP650 belt press incl. brush cleaning - control on the right side! 10038475/164500000G+164587000G M0010137B/04/00002 Subject to prior sale!