dickson used for sale

High-pressure link pump with sliding ring seal - unused - (only one test run) self-priming, multi-stage Manufacturer: Dickow Type: HZS 1023 Built: 1986 Conveyor medium: Fuels Capacity: 60 m3/h Head: 60 m Power: 13.9 kW Temperature: 20C Application: Diesel - 3-stage pump of 60-120 m3 adjustable - impeller diameter 236 mm, - 1,450 rpm - EX-gun motor, 10.5 kW (Felton & Geom) General The self-priming, single- or multi-stage DICKOW link pump has been specially developed for the conveying of hydrocarbons in refuelling plants. HZS pumps are used in tank depots, for emptying tank wagons, filling high tanks, in hydrant systems at airfields, in airfields and many other applications where geodesic suction heights have to be overcome. The performance characteristic field has been graded in such a way that the most favourable efficiency is achieved in all application ...

DICKOW pumps of the NMR series are hermetically dense centrifugal pumps with permanent magnetic coupling, without shaft penetration to the atmosphere. The use of NMR pumps is carried out everywhere where no leaks are permitted, i.e. in the case of Promotion of toxic, explosive and general polluting media.

Becton Dickinson FACSCalibur Flow Cytometer The BD FACSCalibur™ platform offers a unique modular approach to flow cytometry, allowing users to perform both cell analysis and cell sorting in an innovative single-table system. Designed to support multi-color applications, the BD FACSCalibur flow cytometer offers flexibility to support a variety of research and clinical applications.33 nm), which allows analysis of up to 6 parameters (forward scatter and side scatter and up to 4 fluorescence dyes). Year of construction 2000 Item condition: used No voltage converter & power supply available - therefore without functional test.

Pallet rack - Depth support frame for lattice boxes or pallet racks, approx. 384 pieces – used – : Price per piece ex location: only 29.-€ (net), dismantled, packed and loaded! Price for complete acceptance: 9.600.-€ (net)! Primarily complete sale! Manufacturer: C.A. Dick Type: Depth Support Frame Year of construction: 1978 Quantity: 384 pieces Depth: approx. 1,10m Width outside: approx. 87cm Width inside: approx. 84cm Distance between the trusses (i.e. where they are inserted): 1m Condition: good Available: between mid-September and the end of October 2022 Location: Cologne

Depth support frame / depth angle frame / depth support for pallet racks 1.10m for safe storage of pallet boxes or pallets, approx. 384 pieces – used – : Price per piece ex site: only 29.-€ (net), dismantled, packed and loaded! Price for complete acceptance: 9.600.-€ (net)! Primarily complete sales! Manufacturer: C.A. Dick Type: Depth Support Frame Year of construction: 1978 Quantity: 384 pieces Depth: approx. 1.10m Width outside: approx. 87cm Width inside: approx. 84cm Distance between the trusses (i.e. where they are inserted): 1m Condition: good Available: between mid-September and end of October 2022 Location: Niedernberg near Aschaffenburg

Dick grinder, type: SM-111, number: 000133, year of construction: 2004, 220-240 V, 1 Ph, 50/60 Hz,0.130 kW, 1.5 A, 2700/225 rpm, dimensions: 480 mm x 300 mm x 300 mm.

Dick grinder, type: SM-111, number: 1191, year of construction: 2007, 230-240 V, 1 Ph, 50/60 Hz, 225/866/770 rpm, dimensions: 480 mm x 300 mm x 300 mm.

M. No.: 432 Format (cm): Max paper size: 30,5 x 44,4

weight max.: 5 t stroke: 7000 mm clamping width: 17508 mm Height: . mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Overhead traveling crane number: 94283910About usmore than 500 machines in the warehouse over 8500 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5 t stroke: 7000 mm clamping width: 10000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 38Hubwerk DemagAbout usmore than 500 machines in the warehouseover 8500 m² storage area, crane capacity 70 tmore than 1000 items Accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

for frozen meat blocks

Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Drive: 0.55 kW 1405 rpm -Max. Delivery rate: m³/h -Max. Pressure: bar -Max. Temperature: °C -Dimensions: 140/180/H380 mm -Weight: 19 kg

Set consisting of: -1 BD Canto II flow cytometer ( 3 lasers ) -1 HTS module with 4 sets of 40 tubes (12x75 mm) -1 fluid cart -1 monitor -1 central unit + keyboard + mouse -1 software licence key BD DIVA Software ( manuals and software installation cd supplied ) details of specifications and configuration in the pictures In working condition, still plugged in for regular calibration balls (last one on 05 October 2021) sold as is, visible and to be collected in Lyon ( 69008 )

Description: • Packaging line with shrink tunnel, shrink wrapping machine • Max. width passage approx. 1250 mm • Max. height passage approx. 650 mm • Parts of the line: • 1 - Input driven belt conveyor, length 2100 mm • 2 - Shrink plastic cutting and welding station, cutting width approx. 2200 mm • 3 - Driven belt conveyor, length 2500 mm • 4 - Oven for shrink plastic machine, useful tunnel length approx. 2500 mm • Dimensions for transport 10000 x 2400 x 2180 mm Approx. Onsite Dimension. (l x w x h): 8,900 x 3,020 x 2,180 mm, weight approx.: 5,000 kg

FAM Super Dicer V (v): 380 frequency (Hz): 50 Format: French fries Consists of: stainless steel Production capacity: 4000 kg / hour Dimension: Width: 1000 mm Height: 1760 mm Length: 1630 mm Ready for work

Type: Flexon Loading sections (L x W x H): 590x120x200 mm Cutting length: 1,0 – 30,0 mm Saw blades 1 set, 1010 mm Capacity: up to 1800 kg/hour Electric power: 8.0 kW Machine dimension in cm: Width: 145 cm Lenght: 60 cm Height: 115 cm Delivery time: 10 working days after advanced payment

Type: Ruhle SR2 Loading sections (L x W x H): 500x120x200 mm Cutting length: 1,0 – 30,0 mm Saw blades 1 set Capacity: up to 1800 kg/hour Electric power: 3.5 kW Machine dimension in cm: Width: 70 cm Lenght: 150 cm Height: 125 cm Delivery time: 10 working days after advanced payment

Digital display for planer thickness---------- Technical data ---------- Planing width: 630 mm, Number of blades: 2 pieces, Clearance height: 220 mm, Extraction nozzle : 150 mm Sold as is, without technical inspection

- Hobelbreite 1300 mm - Hobelhöhe min./max. 3-300 mm - max. Spanabnahme 9 mm - min. Werkstücklänge 280 mm - Abmessung Dickentisch 1320 x 1100 mm - Motor 18 kW / 400 V - Drehzahl 5000 U/min - Motor Höhenverstekkung 1,0 kW - Motor Vorschub 1,5 kW - Sicherheitsmesserwelle Z = 4, FI 125 mm mit 4 Streifenhobelmesser 1320 x 35 x 3 mm - Vorschubgeschwindigkeit stufenlos 5 - 20 m/min. - segmentierte Stahleinzugswalze - 2 Stahl Auszugswalzen - Dickentisch auf 4 Stahlspindeln - elektrische Höhenverstellung - Dickentisch vorprogrammierbar mit Digitalanzeige der Hobelhöhe - 2 höhenverstellbare Gleitwalzen im Dickentisch - Absaugstutzen 200 mm - Abmessungen L=1860, B=1180, H=1350 mm - Gewicht 2000 kg

- Hobelbreite 810 mm - Hobelhöhe min./max. 3-300 mm - max. Spanabnahme 9 mm - min. Werkstücklänge 280 mm - Abmessung Dickentisch 1000 x 813 mm - Motor 11 kW / 400 V - Drehzahl 5000 U/min - Motor Höhenverstekkung 1,0 kW - Motor Vorschub 0,75 kW - Sicherheitsmesserwelle Z = 4, FI 125 mm mit 4 Streifenhobelmesser 810 x 38 x 6 mm - Vorschubgeschwindigkeit stufenlos 5 - 20 m/min. - segmentierte Stahleinzugswalze - 2 Stahl Auszugswalzen - Dickentisch auf 4 Stahlspindeln - elektrische Höhenverstellung - Dickentisch vorprogrammierbar mit Digitalanzeige der Hobelhöhe - 2 höhenverstellbare Gleitwalzen im Dickentisch - Absaugstutzen 160 mm - Abmessungen L=1350, B=1180, H=1350 mm - Gewicht 1200 kg

Width: 1900 mm Height: 1350 mm Length: 1300 mm Weight: 349 Kg The Urschel GA dicer accepts a maximum infeed product of up to 5.5" (140 mm) in any dimension. The Model G-A Dicer produces flat dices or flat strip cuts. This dicer is equipped with stainless steel product contact parts. It also features continuous operation for uninterrupted production. The Model G-A dicer produces uniform dices, straight french fry strips, and slices from a variety of soft ripe fruits and brittle root vegetables. Types of Cuts Slices: 1/16 – 3/4" (1.6 – 19.1 mm) You say: A slicing knife, crosscut knife spindle and circular knife spindle are used for dicing. Changing the size of the cubes is done by using the required cutting spindles and adjusting the slice thickness. Slice thickness: 1/8 – 3/4" (3.2 – 19.1 mm) Crosscut knives: 9/32 – 7/8" (7.1 – 22.2 mm) Circula ...

- Hobelbreite 630 mm - Hobelhöhe min./max. 3-300 mm - max. Spanabnahme 8 mm - min. Werkstücklänge 280 mm - Abmessung Dickentisch 1050 x 630 mm - Motor 7,5 kW / 400 V - Drehzahl 4800 U/min - Sicherheitsmesserwelle Z = 4, FI 120 mm mit 4 Streifenhobelmesser 630 x 35 x 3 mm - Vorschubgeschwindigkeit stufenlos 0 - 16 m/min. - segmentierte Stahleinzugswalze - 2 glatte Stahl Auszugswalzen - Dickentisch auf 4 Tragspindeln - elektrische Höhenverstellung - Dickentisch vorprogrammierbar mit Digitalanzeige der Hobelhöhe - Holzablage mit kratzfreier Teppichauflage - Absaugstutzen 150 mm - Messereinstelllehre - Abmessungen L=1200, B=1100, H=1160 mm - Gewicht 950 kg

Urschel RA dicer RA dicer is a centrifugal type dicer, with its capability to cut product into clean cut, uniform pieces in the small to intermediate size range, fruits / vegs / certain cheese and nuts. With two spare boxes of knives, blades, belts cutting heads and more, mobile, 3Ph

- Hobelbreite 510 mm - Gesamtlänge der Hobeltische 2250 mm - Streifenmesserwelle Z 4 - Motor 5,5 kW / 400 V - Drehzahl 6000 U/min. - Abmessung Abrichtanschlag 1500 x 200 mm - max. Spanabnahme 6 mm - Abmessung Dickentisch 855 x 510 mm - Durchlass Dickenhobel 250 mm - Vorschub Dickenhobel 5/8/10/16 m/min - elektrische Höhenverstellung des Dickentisches - elektronische Digitalanzeige der Arbeitshöhe - Abmessungen L=2300, B=1150, H=980 mm - Gewicht 900 kg

Treif Felix CE dicer, performance 0,6t/h, 2 grid sets, cutting off knife. You are very welcome to test the machine in Koblenz, Germany.

- Arbeitbreite 250 mm - max. Hobelhöhe 180 mm - Tischlänge 1085 mm - 3-Messerwelle inklusive 3 HSS Wendehobelmesser - Drehzahl 4800 U/min. - Motor 2,8 PS / 400 V - Abrichtanschlag 0C-45C schwenkbar - Absaugstutzen Durchmesser 100 mm - Abmessungen L=1500, B=500, H=900 mm - Gewicht 190 kg - Aluminiumanschlaglineal, neigbar und ordentlich feststellbar - Aluminiumschutz über der Messerwelle (Arbeitsschutz) - seitlich aufklappbare massive Graugusstische - stabiler Unterbau für hohe Standsicherheit - Vorschub wahlweise abstellbar - komfortable Schalter-Stecker Kombination - Stahlblech-Spänehaube für Dickenhobelbetrieb umklappbar - Absaugschlauchanschluss FI 100mm - optimal gelagerte Ein- und Auszugswalzen für optimalen Anpressdruck - Dickentischsäule selbstreinigend - einfaches Einstellen der Dickentischhöhe mit Handrad

Abrichte: - Arbeitsbreite 410 mm - max. Spanabnahme 5 mm - Gesamtlänge der Tische 2200 mm - Aufgabetischlänge 1070 mm - Abgabetischlänge 1070 mm - Arbeitshöhe 900 mm - gleichzeitiges öffnen der Tische - großer Abrichtanschlag 1200 x 160 mm - Abrichtanschlag schwenkbar bis 45C - gezahnte, auswechselbare Tischlippen - Messerwellenabdeckung Brückenschutz Dickenhobel: - Abmessungen Dickentisch 774 x 410 mm - min. / max. Arbeitshöhe 3 / 240 mm - max. Spanabnahme 5 mm - min. Werkstücklänge 180 mm - Dickentisch mit 4 Säulenführung - Dickentisch mit elekrischer Höhenverstellung und Digitalanzeige der Hobelhöhe - Vorschubgeschwindigkeit 7 / 14 m/min. - 4-Messerwelle, FI 95 mm - Abmessungen Hobelmesser 410 x 30 x 3 mm - schrägverzahnte Stahleinzugswalze - massive Rückschlagsicherung - Drehzahl 5000 U/min. - Motorleistung 5,5 KW / 400 V - Absaugstutzen FI 120 mm - Abmessungen L=2200 ...

Abrichte: - Arbeitsbreite 410 mm - max. Spanabnahme 5 mm - Gesamtlänge der Tische 1820 mm - Aufgabetischlänge 880 mm - Abgabetischlänge 880 mm - Arbeitshöhe 870 mm - großer Abrichtanschlag 1100 x 155 mm - Abrichtanschlag schwenkbar bis 45C - gezahnte, auswechselbare Tischlippen - Messerwellenabdeckung Brückenschutz Dickenhobel: - Abmessungen Dickentisch 700 x 405 mm - min. / max. Hobelhöhe 3 / 225 mm - max. Spanabnahme 5 mm - min. Werkstücklänge 180 mm - Dickentisch mit Säulenführung Durchmesser 110 mm - Dickentisch mit mechanischer Höhenverstellung - mechanischer Digitalanzeige der Hobelhöhe - Vorschubgeschwindigkeit 6 m/min. - 4-Messerwelle, FI 100 mm - inklusive BARKE Wendehobelmesser 410 mm - schrägverzahnte Stahleinzugswalze - massive Rückschlagsicherung - Drehzahl 4500 U/min. - Motorleistung 4,0 KW / 400 V - Absaugstutzen FI 120 mm - Abmessungen L=1800, B=740, H=1000 ...

Treif Argon dicers, up to 2 t / h (depending on the product and application), cutt-off length of 1-50 mm, long cutting chamber 550 mm, the machine comes with different grid sets.

Treif Derby 100-CE dicer, performance 1.2 t/h, max. cutting-off length 0.5-32 mm, max. infeed length 400 mm, 1,4 kW You are very welcome to test the machine in our facility in Koblenz, Germany.

- Arbeitbreite 410 mm - min./max. Hobelhöhe 4 / 225 mm - 4-Messerwelle, FI 100 mm - Drehzahl 4500 U/min. - Motor 4,0 kW (5,5 PS) / 400 V - Motor Vorschub 1,1 kW (1,5 PS) - Absaugstutzen Durchmesser 120 mm - max. Spanabnahme 6 mm - Vorschub 8 / 12 m/min - manuelle Tischhöhenverstellung - 2 fein einstellbare Walzen im Dickentisch - Handrad mit Digitalanzeige zur Feineinstellung - Abmessungen L=1000, B=1000, H=1400 mm - Gewicht 450 kg

- Arbeitbreite 530 mm - min./max. Hobelhöhe 3 / 300 mm - 4-Messerwelle, FI 125 mm - Drehzahl 5000 U/min. - Motor 5,5 kW (7,5 PS) / 400 V - Motor Höhenverstellung 0,25 kW (0,34 PS) - Absaugstutzen Durchmesser 160 mm - max. Spanabnahme 8 mm - Vorschub 8 / 16 m/min - elektrische Tischhöhenverstellung - 2 fein einstellbare Walzen im Dickentisch - Handrad mit Digitalanzeige zur Feineinstellung - Abmessungen L=1200, B=1200, H=1400 mm - Gewicht 680 kg

- Arbeitbreite 630 mm - min. / max. Hobelhöhe 3 / 300 mm - 4-Messerwelle, FI 125 mm - Drehzahl 5000 U/min. - Motor 7,5 kW / 400 V - Absaugstutzen Durchmesser 160 mm - max. Spanabnahme 8 mm - Vorschub stufenlos regelbar 5 - 21 m/min - elektrische Tischhöhenverstellung mit 2 Geschwindigkeiten - 2 getrennt einstellbare Walzen im Dickentisch - 4-fach präzisionsgeführter Dickentisch - Gliederdruckwalze ermöglicht Werkstücktransport von unterschiedlichen Dicken - Handrad zur Feineinstellung - Digitalanzeige der Tischhöhe am Frontpaneel - Abmessungen L=1200, B=1200, H=1400 mm - Gewicht 1100 kg

Stock - No.: 1820 1 used, overhauled CUBE DICER as type Sagitta - LANCELIN BG 200 working width 200 mm drive 7,5 kW – NEW cutting tools 4 x 4 x 3 mm cube pellets incl. pneumatic infeed roller system More pelletizing equipment ex our stock Wuppertal Germany available, Ask for our most recent stock-list or visit us

The FAM Flexifam is a medium-sized high-capacity dicer designed for slicing, strip cutting and dicing . FAM Flexifam is suitable for – meat such as beef, ham and turkey – cheese such as Beaufort, Cheddar, Edam and Emmentaler – nuts such as Hazelnut FAM Flexifam is specialized in smaller cutting sizes. First, the product is cut into slices to the thickness set manually by using the adjustment gauge, after which the second cut is made by the fast rotating circular knives cutting it into strips. The strips are then fed directly into the crosscut knife spindle producing the third and final cut-producing dices or rectangular pieces. Number of knives: 17 Distance between knives: 10 mm

FAM Dicer Stainless frame, strip cutter or dicer, up to 2000Kgs per hour, currently set for 10mm dice, previously used on carrots, 3Ph

CUTTING GATE FOR DICER RÜHLE typ SR 1- used Cutting gate sizes to the choice /optional/ : 6 and 24 mm Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT id: PL547-17-47-669 tel. 0048/33 812 58 60 Fax. 0048/33 812 58 36 abc.inter-wiba.com.pl info@inter-wiba.com.pl

LIQUIDATION of diced meat cutter from the manufacturer HOLAC, model HO21N. Built in stainless steel and anodized aluminum. You can chop fresh and frozen meat, vegetables, cheeses and sausages. Machine designed and manufactured following standards set by the CE in hygiene and safety. Measures of the inlet hopper: 90 x 90 x 300mm. Product piece measurements: 20 x 20 m Electrical power: 380V, 3Ph, 50Hz, 3A, 1.1Kw. Machine dimensions: 1150 mm long x 700 mm wide x 1010 mm high. Weight 173kg. Dice chopper, meat diced chopper, meat slicer, frozen meat chopper, topping, vegetable chopper, cheese chopper, sausage chopper. Equipment fully revised, conditioned and guaranteed.

Slicing-dicing machine by FAM Model: ILC-3D Year: 2000 Power: 4kW Current cutting size: 16x16x16mm Overall dimensions: length 810mm, width 1,850mm, height 1,350mm

REF-666 BERTUZZI SLICER-DICER Use: fruits and vegetables. Manufacturer: BERTUZZI Model: CLF0817 Year: 1997 Output: 500-6,000 kg/h depending on the type of product and cut size 415V, 50 Hz, 2 HP, three-phase Current cut size: 1-10mm slices Year of manufacture: 1997 Dimensions: L-850mm, W-850mm, H-1.430mm.

DICER MACHINE, FAM TYPE YURAN Technical description: FAM, Type YURAN. Serial number: 6162 400 V, 3 Ph, 50 Hz, 4 kW Weight: 600 kg, Belt: plastic belt, belt width: 270 mm, working width: 220 mm 28 knives, distance between knives: 8 mm Total dimensions: 2700 mm x 850 mm x 1450 mm

SLICING-CUTTING AND DICING MACHINE, URSCHEL, TIPO RA-A Technical description: It works with meat and vegetables. Serial number: 1027 Material: Stainless steel Power supply: 380/440V - 50/60Hz Dimensions: 1000 x 930 x 1590 mm Includes spare parts kit Slice thickness: 1/16 a 3/8 inch. (1,6 a 9,5 mm) Circular blade cuts: 1/8 a 1 inch. (3,2 a 25,4 mm) Cross cut blades: 0,05 a 3 pulg (1,3 a 76,2 mm) The RA-A model produces a wide range of diced and shredded cuts of a variety of products, such as fruits, vegetables, seasonings, nuts, and processed meats. Maximum product inlet size is 3-1 / 2 in. (88.9 mm) in any dimension. The RA-A offers continuous operation for uninterrupted production and a simplified design for easy cleaning and maintenance.

MULTI-PURPOSE DICER-SLICER, TREIF, MODEL: 80 Technical description: Ideal for meat, with or without bone, and vegetables. Serial number: 298S-70052 Current format: 25 x 25 mm (other formats available) Material: Stainless steel Power supply: 380-440 V / 50-60Hz

Dicer Ruhle Type: SR1 Loading chamber dimensions: 330 x 100 x 100 mm Dimensions: 1000 x 600 x 1100mm Efficiency: 900-1500 kg/h, 80 cuts per minute Knives: 25x25mm Power: 1.5 kW Weight: 270kg 400V, 50Hz 3N Stainless steel Pieces in stock: 1 Condition: Used

CREEL KNIFE - CUTTING CREEL FOR DICE CUTTER MACHINE TREIF - USED 1 set. GATE KNIFE D = 20 mm for cube cutter TREIF FELIX AND FOR TREIF DERBY Art.Nr. 51823 1 set CREEL KNIFE D = 26 mm for cube cutter TREIF FELIX CE Art.Nr. 51818 Request a Quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biała VAT number: PL547-17-47-669 Phone: 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

Dichtung für 400x400 Filterplatte Schenk Linsendichtung More then 300 machines new and second hand on our seema .de

Treif Felix 100-CE dicing and strip cutting machine Performance max. 0.8 t/h Including one grid set for cubes (consisting of two single grids) Including cutting knife Max. cutting-off length 0.5-32 mm Click & go quick change gridset system Refurbished condition

Kronen KUJ Dicer Stainless machine, can be used for dicing, slicing and strip cutting, V cuts veg from 2 to 12mm and dices from 3mm to 20mm, up to 3000Kg per hour depending on product, with manual, mobile, 3Ph

Dicing machine for fruits and vegetables MARRODAN 2000kg / h Description The MARRODAN dicer cuts cubes from 3 to 20 mm with precision and perfect quality. It can process up to 2,000 kg per hour. Its accessories allow an impeccable cut, without damaging the product. Even delicate products like onions, peppers, mushrooms, tomatoes, zucchini, or lightly frozen products can be processed. characteristics Year 2009 Width: 1000 mm Height: 1500 mm Length: 1550 mm

Foodlogistik dicer, type: DicR comfort 112, serial number: 2224443, year of construction: 2022, 400 V, 3 Ph, 50 Hz, 6.8 kW, chamber length: 530 mm, total dimensions: 1750 mm x 730 mm x 1100 mm.