We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,597 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Max. load: 1t, max. arm length: 3000mm, column diameter: 410mm, height: 3760mm, lifting speed: 16m/min, need a 1x1x1m³ foundation, an on-site inspection is possible.
used
Motorized slewing crane make DEMAGTechnical specifications:Load capacity: 2000 kgOutrigger: 5000mmLifting height: 5000mmWith- Demak PK 10 electric chain hoistused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Main hoist cap: 20 ton Secondary hoist cap: 3,2 ton no radio control, control with wire Kind of: overhead travelling crane Capacity: 20 ton + 3,2 ton Span: 17 855 mm Drop: 9000 mm Weight: 15 ton Numbre of riggers : double rigger
new
Condition: NEW Price per piece
used
screw size: unbkt mm injection shot weight in Polysterol: unbkt g/PS closing pressure: 100 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
screw size: unbkt. mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 150 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
used crane hooks for sale 20 - 80 -100 tons
used
Screw diameter: 30 mm Displacement: 74 cm³Injection weight in polystyrene: 66 g/hp Injection pressure: 2,020 bar Clamping force: 50 t Lights tie bar distance H x V: 420 x 370 mm Tool installation height min.: 200 mm Opening distance: 340 mm CONTROL: NC4 Screen text: german / english Operating instructions: german / english FHK interface for robots: Yes Core pull: 1x Pump drive power: --- Total connection load: 33 kW Total weight: 4,750 kg Dimensions L x W x H: 4.3 x 1.1 x 2.0 m m m m Terms of payment: 100 % before taking over the machine, strictly net
used
clamping force: 800 kN injection volume: 177 cm³ screw diameter: 35 mm platen size: 580 x 580 mm Condition: used, Specification: Horizontal injection moulding machine, type: Ergotech viva 80-400 - Internat. Size specification: 800 - 400 injection unit: - Screw diameter: 35 mm - L/D - ratio: 20D - Injection volume: 177 cm³ - Injection pressure: 2387 bar - Cylinder heating: 8,8 kW clamping unit: - Clamping force: 800 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 580 x 580 mm - Clear column distance: 400 x 400 mm Total machine: - Oil tank filling: 220 ltr. - Pump capacity: 15 kW - Voltage: 3x 400V, 50 Hz, N, PE - total power: 23,8 kW - Dimensions L/W/H: approx. 4250 x 1270 x 1795 mm - Weight without oil approx.: 3,600 kg - 1x core pull Plant i ...
used
clamping force: 600 kN injection volume: 106 cm³ screw diameter: 30 mm platen size: 590 x 600 mm Condition: used, Specification: Horizontal injection moulding machine, type: System 60/420-200 - Internat. Size specification: 600 - 200 injection unit: - Screw diameter: 30 mm - L/D - ratio: 20D - Injection volume: 106 cm³ - Injection pressure: 1995 bar - Cylinder heating: 8,3 kW clamping unit: - Clamping force: 600 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 590 x 600 mm - Clear column distance: 420 x 420 mm Total machine: - Oil tank filling: 180 ltr. - Pump capacity: 22 kW - Voltage: 3x 400V, 50 Hz - total power: 30,3 kW - Dimensions L/W/H: approx. 4200 x 1400 x 2000 mm - Weight without oil approx.: 3,950 kg - 2x core pull Plant is still in ...
used
The swivel arm is in used condition and is fully functional. - Incl. bracket for wall mounting - Payload 125 kg Condition see pictures. Visit and demonstration possible. The indicated price is a net price for collection ex works. A chargeable transport within Germany can be organized on request.
used
Production year: 2004 Control: NC4 Injection unit: .../200 Screw diameter: 25 mm Specific injection pressure: 2400 bar Injection volume: 61 cc Injection weight: 54 g Tool closure system: .../500 Clamping force: 50 t Tool plate dimensions: 520 x 520 mm Distance between columns: 355 x 355 mm Tool height: 210 mm Opening distance: 400 mm Max.Distance plates: 610 mm General data: Pick-up date: Immediate Dimensions (m) LxWxH: 3.7 m x 1.4 m x 1.8 m Weight: 2900 kg
used
Type: PK5N Kind of: electric chain hoist Capacity: 1000 kg
used
Type: PK5N Kind of: electric chain hoist Capacity: 1000 kg
used
width: 5060 mm height of main beam: 1072 mm height of hoist on top of beam: 1045 mm Kind of: overhead travelling crane Capacity: 20 ton Span: 25 meter Drop: 10 meter Tackle speed: 0,6 / 6 m/min Rotationspeed: 6,3 / 25 m/min Displacementspeed: 80 m/min Weight: 23,4 ton Numbre of riggers : double girder
used
16 meter vertical lift capacity! Kind of: overhead travelling crane Capacity: 10 ton Span: 5000 mm Drop: 16 meter! Numbre of riggers : double girder
used
Key data: 5000 , 2550 , 95
Year of construction: 2001 Clamping force: 5,000 KN with 6-axis Fanuc robot M16i , Year of construction 2001 incl. conveyor belt and safety fence Equipment: Screw: diameter 95 mm Injection weight: 2,550 gr./hp Ejector stroke: 230 mm Tie bar spacing: 900 x 800 mm Installation height min. – max.: 400 – 880 mm Max. distance between plates: 1,690 mm Opening travel max.: 810 mm Max. tool weight: 6,700 KG 6-fold cascade pneumatic 2 core pulls Robot interface Injection pressure max. 1,550 bar Control NC10
used
: 125 kg width:: 4 m length: 6,5 m : 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
CLAMPING FORCE: 50TON PLATEN SIZES: 540 X 540MM D.B.T.B: 355 X 355MM MIN MOULD HEIGHT: 210MM MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 610MM SCREW DIAMETER: 35MM INJECTION PRESSURE: 1890BAR STROKE VOLUME: 144CM3 SHOT WEIGHT (P/S): 128GR CONTROLS: NC4 MOTOR: 11KW HEATING CAPACITY: 7.5KW SCREW DRIVE: HYDRAULIC CORE PULLING: 1 AIR VALVES: 1
used
Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Nominal load: 750 kg -Lifting speed: 9.5 m/min -Lifting height: 9.5 m -without service -Dimensions: 730/420/H340 mm -Weight: 160 kg
arm length: 8000 mm total column height: 4000 mm weight max. in kg: 3000 kg height: 4300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m K9F 0902 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
CLAMPING FORCE: 250TON PLATEN SIZES: 930 X 930MM D.B.T.B: 630 X 630MM MIN MOULD HEIGHT: 330MM MOULD OPENING STROKE: 670MM MAX DAYLIGHT: 1380MM EJECTOR STROKE: 200MM SCREW DIAMETER: 50MM INJECTION PRESSURE: 3032BAR STROKE VOLUME: 530CM3 SHOT WEIGHT (P/S): 482GR CONTROLS: NC5 SCREW DRIVE: ELECTRIC AIR CIRCUIT: 4
used
Overhead crane, indoor crane, assembly crane, workplace crane -with 2x electric cable pulls -Load capacity: 2x 1600 kg -Bridge load capacity: 3.2 tons - Wingspan: 6.4m -hall service -Dimensions: 2000/6400/H1000 mm -Weight: about 2000 kg
used
Hydraulic power pack, hydraulic pump, hydraulic pump -Max. Pressure: 100 bar -Liter output: 6 l/min -Hydraulic tank -Hydraulic valve -Weight: 110 kg
used
Screw compressor, air compressor, compressed air unit, stationary air compressor -Delivery quantity: 35.1 m³/min -Motor power: 200 kW -Construction encapsulated -with oil/water heat exchanger -Max. Pressure: 8 bars -Operating hours: 61,107 h -Year of construction: 1990 -Electric motor type: TN5317M-BZ014-Z -Power: 200kW -Speed: 1480 rpm -Shaft: Ø mm -Construction: B3/5 -Protection class: IP23 -Dimensions: 3100/1900/H2250 mm
used
Hand trolley, rolling trolley, crane trolley, trolley trolley, crane trolley, crane trolley, trolley, carrier trolley, monorail trolley -Crane chassis: beam width: up to 175 mm -Load capacity: 1000 kg -Dimensions: see technical. Drawing in the photos -Quantity: 8x chassis available -Price per piece -Dimensions: 245/200/H190 mm -Weight: 7.6 kg/pc.
used
Manipulator, lifting aid, lifting device, workplace crane, hall slewing crane, hall crane, workplace crane, material grab, column slewing crane -Manufacturer: dalmec, manipulator pneumatic Posivel type PVC -Load capacity: 80 kg -Throat: max. 3040 mm -Total height: 3015 mm -Hook height: 1800 mm -Stroke: 3300mm -Swivel range: 270° -Dimensions: see photo technical. drawing -Transport dimensions: 3050/700/H500 mm -Town weight: 192 kg
used
Crane magnet, lifting magnet, load lifting magnet, load lifting magnet, round magnet, scrap lifting magnet, scrap magnet -Construction: electro magnet -max lifting capacity: 2200 kg -Dimensions: 250/340/H460 mm -Own weight: 1114 kg
used
Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Transfer in current condition as seen -Operation is missing a switching element (can be installed at an additional cost) -Motors tested: and ok -Rated load: 1125 kg -Lifting speed: 6.3 m/min -Lifting height: 6.3 m -Dimensions: 1100/1000/H700 mm -Weight: 368 kg
used
Electric motor, three-phase motor -Power: 0.37 kW -Speed: 705 rpm -Shaft diameter: 24 mm -Construction: B5 -Protection class: IP 54 -Price: per piece -Number: 5x available -Dimensions: 290/170/H205 mm -Weight: 13 kg
used
Gear motor, electric motor, three-phase motor -Power: 0.55 kW -Speed: 110 rpm -Shaft: Ø 20 mm -Construction: B5 angle -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 450/270/H175 mm -Weight: 20 kg
used
Gear motor, electric motor -Speed: 80 rpm -Power: 0.55 kW -Construction: B5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 450/270/H175 mm -Weight: 20 kg
used
Gear motor, electric motor -Speed: 185 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg
used
Gear motor, electric motor, three-phase motor -Speed: 89 rpm -Power: 0.25 kW -Construction: B5 angle -Shaft diameter: Ø 15 mm -Protection class: IP 54 -Dimensions: 380/200/H150 mm -Weight: 14 kg
used
Gear motor electric motor -Speed: 197 rpm -Power: 0.55 kW -Construction: hollow shaft angle B5 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Dimensions: 460/230/H170 mm -Weight: 20 kg
used
Electric motor, three-phase motor -Handover: in the current condition as seen -Brake: dismantled -Power: 1.8KW -Speed: 1375 rpm -Shaft: Ø 24 mm -Type: B5 -Protection class: IP 54 -Dimensions 360/200/H250 mm -Weight 19.5kg
used
Control type: NC4 Closing force: 200T Opening stroke: 500 mm Between columns: 610 x 610 mm Tray dimensions: 830 X 830 mm Mini / maxi mold: 310/660 mm Max distance between plates: 1235 mm Screw diameter: 45/25 mm Screw length: 20 D cm3: 322/61 Bars: 1900/2006 Motor power: 30KW Heating power: 13KW Closing weight: 10T1 Cores: 2 Robot interface Bi metal Others: turntable, 2 blow guns
used
: 149207/45 A pressure / power: 10 bar Motor output: 55 kW : 8,2 m³/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Gear motor, electric motor, three-phase motor -Speed: 62 rpm -Power: 0.25 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Weight: 25 kg
used
B&A REF: 8963 TON: 160 SHOT WEIGHT: 402 SCREW DIAMETER: 50MM STROKE VOLUME: 442CM3 INJECTION PRESSURE: 1946AR PLATEN SIZES: 770 X 770MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 275MM MAX MOULD HEIGHT: 585MM MOULD OPENING STROKE: 810MM MAX DAYLIGHT: 1085MM EJECTOR STROKE: 150MM CONTROLS: NC5 AIR VALVES: 1 CORE PULL: 1 SCREW DRIVE: HYDRAULIC
used
B&A REF: 9004 TON: 200 SHOT WEIGHT: 570G SCREW DIAMETER: 60MM STROKE VOLUME: 636CM3 INJECTION PRESSURE: 1351AR PLATEN SIZES: 830 X 830MM DBTB: 560 X 560MM MIN MOULD HEIGHT: 310MM MAX MOULD HEIGHT: 660MM MOULD OPENING STROKE: 575MM MAX DAYLIGHT: 1235MM EJECTOR STROKE: 180MM CONTROLS: NC4 AIR VALVES: 1 CORE PULL: 1 SCREW DRIVE: HYDRAULIC
used
INJECTION UNIT Screw diameter: 22 mm Calculated injection volume: 42 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 1830 bars CLOSING UNIT Closing force: 250 kN Opening stroke: 315 mm Mold thickness Mini / Max: 160 mm Max distance between tray: 475 mm Passage between columns: 280 x 280 mm Tray size: 410 x 410 mm GENERAL Quantity of oil: 120 l. Dimension: (WxHxD) 2.90 x 1.65 x 1.03 m. Weight: 1550 Kg
used
INJECTION UNIT Screw diameter: 40 mm Calculated injection volume: 231 cm³ Length / diameter ratio: 20 L / D Pressure on the material: 2020 bars CLOSING UNIT Closing force: 1000 kN Passage between columns: 460 x 460 mm Tray size: 580 x 470 mm GENERAL Heat output: 22 kW Total installed power: 31 kW Quantity of oil: 250 l.
used
Type of control: NC4 Closing force: 420T Opening stroke: 710 mm Between columns: 870 x 710 mm Tray dimensions: 1200 x 1100 mm Mini/maxi mould: 380/820 mm Max gap between trays: 1530 mm Injection: Screw diameter: 70 mm Screw length: 20D cm3: 1212 Bars: 1877 General: Motor power: 45 kW Heating power: 31 kw Closing weight: 18T Options: Cores: 2 Robot interface: yes Bi metal: yes Others: wittmann robot
used
Control type: NC 4 Number of hours: 45,000 hours Closing force: 420 T Opening stroke: 710 mm Between columns: 810 x 710 mm Tray dimensions: 1200 x 1100 mm Mini/maxi mold: 380/820 mm Max distance between trays: 1530 mm Injection: Screw diameter: 60 mm Screw length: 20D cm3: 763 Bars: 1905 General: Motor power: 45 kW Heating power: 23.1 kW Closing weight: 18t Injection weight: Length dimensions: 8 m Width dimensions: 2.20m Height dimensions: 2.50 m Options: Cores: 2 Robot interface: YES Bi metal: YES
used
Control type: NC 4 Number of hours: 38,000 hours Closing force: 420 T Opening stroke: 710 mm Between columns: 800 x 710 mm Tray dimensions: 1200 x 1100 mm Mini/maxi mold: 380/820 mm Max distance between trays: 1530 mm Injection: Screw diameter: 60 mm Screw length: 20D cm3: 763 Bars: 1905 General: Motor power: 45 kW Heating power: 23.1 kW Closing weight: 18t Injection weight: Length dimensions: 8 m Width dimensions: 2.20m Height dimensions: 2.50 m Options: Cores: 2 Robot interface: YES Bi metal: YES
used
Type of control: NC4 Closing force: 50 T Opening stroke: 260 mm Between columns: 330 x 330 mm Tray dimensions: 490 x 500 mm Mini/maxi mould: 150/350 mm Max gap between trays: 610 mm Injection: Screw diameter: 30 mm Screw length: 20D cm3: 74 Bars: 1400 General: Motor power: 20 kW Heating power: 5 kw Closing weight: Injection weight: 3.3 tons Dimensions length: 4.00 m Dimensions width: 1.20 m Dimensions height: 1.80 m Options: Cores: NO Bi metal: YES
used
Closing force: 420 T Opening stroke: 770 mm Between columns: 820 x 820 mm Tray dimensions: 1200 x 1200 mm Mini/maxi mould: 380/825 mm Max gap between trays: 1595 mm Screw diameter: 60 mm Screw length: 25D Injection volume: 763 cm3 Injection pressure: 2106 bar Motor power: 135 kW Heating power: 27.9 kw Injection weight: 24 tons Dimensions length: 8m Dimensions width: 2.2 m Dimensions height: 2.70 m robot interface Bi-metal 2 blowguns, 3 batteries on injection, 16 hot channels
used
Closing force: 420 T Opening stroke: 770 mm Between columns: 820 x 820 mm Tray dimensions: 1200 x 1200 mm Mini/maxi mould: 380/825 mm Max gap between trays: 1595 mm Injection: Screw diameter: 60 mm Screw length: 25D cm3: 763 Bars: 2106 General: Motor power: 135 kW Heating power: 27.9 kw Options: Cores: Robot interface: YES Bi metal: YES Others: 2 BLOW GUNS, 3 injection batteries, 16 hot runners
used
Year 2013 Type of control: NC5 Number of hours: 47,812 Storage location: MECA PLASTIC Deadline: AVAILABLE Closing Closing force: 420 T Opening stroke: 770 mm Between columns: 820 x 820 mm Tray dimensions: 1200 x 1200 mm Mini/maxi mould: 380/825 mm Max gap between trays: 1595 mm Injection: Screw diameter: 60 mm Screw length: 25D cm3: 763 Bars: 2106 General: Motor power: 135 kW Heating power: 27.9 kw Closing weight: Injection weight: 24 tons Dimensions length: 8m Dimensions width: 2.2 m Dimensions height: 2.70 m Options: Cores: Robot interface: YES Bi metal: YES Others: 2 BLOW GUNS, 3 injection batteries, 16 hot runners