128,855 used machines on RESALE, but how to find them? Machine Search
all stainless steel suitable for thermal oil heating 209 kW suitable for fire protection with top hold down belt isolated canopy infeed belt oil circulation system net belt length 6.000 mm net belt width 600 mm adjustable speed sediment removal system filter lifting unit with manual hoists dimensions (l x w x h) : ± 8.900 x 2.000 x 4.000 mm
4 shaft shredder for crushing of thick-walled pipes. Supply via feeding shaft (not in scope of delivery, can be manufactured alternatively) Manufacturer Vecoplan Drive: Rotorshaft 1: 37 kW Rotorshaft 2-4: 30 kW (each)
continuous grilling line all stainless steel adjustable product height with lower and upper belt : bottom and top grilling independent temperature control below and above net length 1.800 mm belt width 600 mm electrically heated ± 90 kW belt washing system above and below adjustable temperature range per heating plate (6 pieces) capacity up to 250 kg/h depending on the product adjustable speed dimensions (l x b x h): ± 3.000 x 1.650 x 2.400 mm
10,06 running meters shelf racks, 60cm deep , workshop shelves , storage racks , manual storage , plug-in racks , small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 10,06 running meters Shelf offer 10,06 running meters consisting of: 11 x stand approx. 200 x 60 cm, disassembled (incl. 2 x foot & 2 x cover cap). 50 x base approx. 100 x 60 cm. 200 x shelf holders. 11 x diagonal 1176 mm ( for crossing ). 11 x turnbuckle (for crossing). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 1422,00 € net ...
30,06 running meters shelf racks, 60cm deep , Workshop shelves , Storage racks , Hand storage , Plug-in racks , Small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 30,06 m Shelf offer 30,06 running meters consisting of: 31 x stand approx. 200 x 60 cm, disassembled (incl. 2 x stand & 2 x cover cap). 150 x floor approx. 100 x 60 cm. 600 x shelf holders. 31 x diagonal 1176 mm ( for crossing ). 31 x turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 4199,00 € net plus lega ...
plastic belt with fold-down sides belt width 580 mm outfeed height ± 2.700 mm infeed height : ± 800 mm total dimensions : ± 6.800 x 1.000 x 2.700 mm adjustable speed mobile 1 kW
with stage for Diosna W 401 A boiler mobile on wheels with brake Load capacity max. 600 kg lift and tilt dough into pickers and other bakery machines
TS Techniek – Weiler” Oil fryer Type HOF-10000/600 all stainless steel net belt length 10.000 mm net belt width 600 mm dimensions (l x w x h) : ± 12.300 x 1.700 x 2.650 mm adjustable speed extra infeed belt thermal power 609 kW suitable for thermal oil heating with top hold down belt sediment removal system oil circulation pump OMRON touch screen control + Oil drum filter Type ODF-100 Power: 3 x 400V, 50Hz, 0.12kW Dimensions: (l x w x h) : ± 1100 x 2000 x 3000 mm + 2 pcs. Oiltank Type Oil hold tank Content: 2.500 L Dimensions: Ø1300 x 3450 mm
KROENERT PACK 600 WITH TPC type KRA 250 water Chiller Coating and Laminating Machine PAK 600 For following operations: Wax Laminate / Coating - one sided 2 - 30 g/m2 Hotmelt Coating at temperature 10 - 40 g/m2 For the following materials: Unclad Aluminiumfoil 9 -150 my Flexible films like PE, PP, PVC, PVDC, PVA, Polyester and Polyamide films. Cellophane and cellulose acetate films Paper and material combinations. Max Mechanical speed V = 100m /min Realisable speed depending on material and application grammage. The Complete drive assembly was overhauled in 2016 for R 1.2 million.
x-400,y-330,z-350,angle table 630x335,SK 40, 40-6,000 rpm,measuring probe
Code: 0705 Brand: LANDONIO - ITALIA Model: LAR 600 Double disc sanding machine for working of patterns , moulds, wood pieces , metal and synthetic material Disc diameter mm 600 Motor Hp 6 Table size mm 800 x 300 Tables inclination 0-30° upwards/downwards Disc rpm 950 Spare disc Overall dimensions : mm 1250 x 800 x 1150 h Weight kg 580
5,06 m shelving racks, 60cm deep , Workshop shelves , Storage racks , Hand storage , Plug-in racks , Small parts warehouse Data: H : approx. 200 cm D : approx. 60 cm L : approx. 5,06 m Shelf offer 5,06 running meters consisting of: 06 x Stand approx. 200 x 60 cm, disassembled (incl. 2 x stand & 2 x cover cap). 25 x floor approx. 100 x 60 cm. 100 x shelf holders. 06 x diagonal 1176 mm ( for crossing ). 06 x Turnbuckle ( for crossing ). Manufacturer: META CLIP. Load: 150 kg per floor, with evenly distributed load. Levels: 5 x storage levels. Surface: sendzimir galvanized. New goods from stock. Made in Germany. 100% quality at the best price. The pre-assembly of the frames can be done by us for a small surcharge of 2 € / net per piece. Delivery on request by us cheaply possible. -- IMMEDIATELY AVAILABLE MULTIPLE TIMES-- Price: 728,00 € net plus legally valid VAT ...
Technical details drive: - Propulsion: Yanmar L100N - Starter: E-start (starter) - Number of cylinders: 1 - Fuel type: Diesel - Fuel tank capacity: 24 litres - Engine oil: 1.65 litres - Forced lubrication - Forced cooling - Fuel consumption at 75% load: 1.4 l/h - Sound pressure level (Lp): 67 dB(A) - Sound power level (Lw): 93 dB(A) Technical details Power generator: - Nominal voltage: 230 / 400 V - Apparent power at LTP: 3,200 / 6,900 VA - Active power at LTP: 2.5 / 5.5 kW - Apparent power at COP: 3,000 / 5,600 VA - Active power at COP: 2.4 / 4.5 kW - Generator protection class: IP 23 - Sockets: 1 x 230V Schuko / 2 x 230V, 16A / 1 x 400V, 16A - Protection class of sockets: IP 44 (LTP = time-limited generator power (max. power of the generator within 500 h/year with a continuous operation of the generator of 300 h), COP = aggregate continuous output with unlimit ...
Sheet filter, Plate Filter Seitz Orion 60 x 60 for Beer, Wine, Juice With 23 stainless steel plates 60 x 60 cm With 56 x PVC filter plates 60 x 60 cm With 4 x Endplates 60 x 60 cm / steel Fittings complete Measurements and Weight: Height: 1680 mm Width: 3500 mm Length: 820 mm Weight: 1350 kg 60 x 60 Per plate = 140 Ltr in the case of sterile filtration – 2940 Ltr =350 Ltr. in the during clarification – 7350 Ltr. 3 Filter layers per m²
Sheet filter, Plate Filter Seitz Orion Type 60A100 for Beer, Wine, Juice Manufacturer: SEITZ Orion Type: 60A100 No.72044 Year of production: 1975 With 98 x PVC filter plates 60 x 60 cm With 4 x Endplates 60 x 60 cm / steel Fittings complete Measurements and Weight: Height: 1690 mm Length: 4200 mm Width: 1300 mm Weight: 1650 kg 60 x 60 Per plate = 140 Ltr in the case of sterile filtration – 2940 Ltr =350 Ltr. in the during clarification – 7350 Ltr. 3 Filter layers per m²
RS Simulators Here we offer a temperature test chamber. Water cooling Temperature range: -45°C to +180°C External dimensions: width 1300 mm x height 2100 mm x depth 2250 mm Test area dimensions: width 840 mm x height 840 mm x depth 840 mm Aggregate part : width 2300 mm x height 2000 mm x depth 1300 mm Average heating speed: approx. 3 K/min Average cooling rate: approx. 2 K/min Power consumption: 15 A Connection voltage: 3x400V/N/PE 50Hz Weight: approx. 1000 kg Type: VTS 600/45 RS Refrigerant: R452 Zustand: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, information is reserved!) We will be happy to answer any further questions you may have on the phone.
Sheet filter, Plate Filter Seitz Orion Type 60A150 for Beer, Wine, Juice Manufacturer: SEITZ Orion Type: 60A150 No.72466 Year of production: 1979 With 85 x PVC filter plates 60 x 60 cm With 2 x Endplates 60 x 60 cm / steel Fittings complete Measurements and Weight: Height: 1180 mm Length: 4100 mm Width: 950 mm Weight: 1650 kg 60 x 60 Per plate = 140 Ltr in the case of sterile filtration – 2940 Ltr =350 Ltr. in the during clarification – 7350 Ltr. 3 Filter layers per m²
This sturdy workbench is perfect for do-it-yourselfers and professionals who need a sturdy work surface with storage space. The work surface consists of a 38 mm chipboard on which a high-quality edged flat sheet is placed, thus providing a solid foundation for any type of project. Under the work surface there is a shelf rack with 12 pull-outs (6 pull-outs per side), which offer plenty of storage space for tools, materials and accessories. The scope of delivery includes: 01x Workbench, used/ new System: SSI Schaefer Type: PR 600 Dimensions: approx. W 2,900 x D 800 x H 940 mm consisting of each: 02x Workbench stand, second choice (new) Material color: sendzimir galvanized Stand height: 900 mm Stand depth: 800 mm Incl. cross and diagonal struts, base plates The stands are pre-assembled ( screwed truss ) 02x Workbench trusses, new Material color: blue Box profile ...
Machine type: Test mandrel Manafacture: System 3R Type: 3R-606 Year of construction: unbek. Condition: Used Offer will only be sent if a complete imprint is provided! Price 800 Euro incl. 19 % VAT and shipping within Germany Location Warstein , Germany Reference M-HIR-0623-1 DESCRIPTION We offer you to buy a used mandrel from the manufacturer System 3R, as shown in the pictures. Availability: Immediately Our offer is aimed at traders who are registered within the meaning of the trade regulations according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are excepted!
ABB ACS601-0040-3 Frequency Converter Manufacturer: ABB Type: Frequency Inverter Drive Model: ACS601-0040-3 Phases: 3 Power rating: 37 kW Input type: Digital, Analogue Maximum switching current: 76 A Minimum operating temperature: 0 °C Maximum operating temperature: +25 °C Height: 715 mm Breite: 306 mm Width: 360 mm Weight: 35 kg The frequency converter is new and has never been in operation. Documentation available. The frequency inverter can be inspected anytime upon prior arrangement.
AUTOMATIC CUT-OFF SAW model STROMAB TR 600 second hand machine in excellent working conditions CE regulation : YES machine suitable for cutting wooden boards, packaging, windows/doors frames , furniture , pallets, garden furniture and various equipment: hydraulic saw blade movement safety 2 hand operation machine according to CE norm brake motor safety fence on worktable working table mm.3000 on right side from saw blade with idle rollers diam.mm.90 working table mm.2000 on left side of saw blade with idle rollers diam.mm.90 n.1 saw blade diam. mm. 600 n.3 side stopper on fence right side of the saw blade technical data: motor power saw blade Hp 12 / Kw 9 motor power hydraulic unit Hp 1,5 / Kw 1,1 saw blade diam. mm.600 speed saw spindle rpm 3000 working hight over ground floor 850 mm working pressure 8 bar weight 450 kg
McIntyre 600 HD Shear A fast and strong shear with an extended blade and hold down clamp, making it ideal for every cutting and cleaning task including car radiators Extended blade Built at the request of customers looking for a shear with a longer blade to handle larger items such as car radiators, the 600 HD offers more cutting area at less cost. The 600 HD will cut through radiators, for example, in one pass, speeding up processing and improving safety for the operator.
Key data: 600 mm, 1250 mm, 3000 1/min
Machine Details Stock-No. 1105-03939 Type of machine CNC Lathe - Inclined Bed Type Make GILDEMEISTER DMG Type NEF 600 Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 600 mm turning length 1250 mm control SIEMENS 840 D greates pass round over bed 600 mm centre height 350 mm Spindle Bore 92 mm turning speed range 3500 rpm Rapid Travel - Longitudinal/Face 20 m/min face stroke 400 mm tailstock quill diameter 100 mm Tailstock Quill Stroke 1150 mm tailstock taper MT 5 Turret (X-Stations) 12 turning diameter over slide 410 mm Additional information Acc. 3-Jaw Chuck 315 mm, tailstok turret 8 P ,chip conveyor, coolant CNC Siemens 840 D
McIntyre 600 HD Shear A fast and strong shear with an extended blade and hold down clamp, making it ideal for every cutting and cleaning task including car radiators Extended blade Built at the request of customers looking for a shear with a longer blade to handle larger items such as car radiators, the 600 HD offers more cutting area at less cost. The 600 HD will cut through radiators, for example, in one pass, speeding up processing and improving safety for the operator.
Ex flow sensor, SS 20.600, Ausführung 250mm, Schmidt, mint condition -40% Special price ! We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price of a similar product is about € 1.840. If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. Flow sensor With factory calibration (no accredited calibration) - Type SS 20.600 Mechanical version 250 mm - Through-bolt joint Pressure density DGV - Stainless steel G1/2 Measuring range 0 ... 20 m/s - Calibration Standard calibration Pulse output - Standard 100 Hz, Further outputs, Without communication modules - Explosion protection without application range - For ...
For sale is a complete frame sawmill as listed below. (Single sale also possible, please register in advance) An annual cut of up to 60,000 solid cubic metres of round timber is possible with the system. With a log length of 4 metres, the current annual cut is approx. 30,000 solid cubic metres in 1-shift operation. The facility is still in operation and can be visited by appointment. Machine Listing: 01. Log feed 4-strand SPRINGER with separator with roller conveyor with log turner with insert 02. Clamping carriage remotely controlled ESTERER Type: FHZ SV Built in 1990 Track width: 110 cm with auxiliary wagon with cabin 03. Frame saw ESTERER Type: HDS Built in 1973 600 stroke max. passage 71 cm with splitting wedge with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up 04. Frame roller conveyor Mayrhofer w ...
Vacuum pump Manufacturer: Pfeiffer Type: DUO 2.5 (PK D41 602A) Built: 2003 Pw: 0.13 kW For further data see also type plate photo All information without guarantee
Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg
Single head INK-JET printer designed for coding and marking fast moving objects on a conveyor without requiring direct contact 1 to 5 print lines -Three possible applications: Mini (2 lines), Midi (4 lines), Maxi (5 lines) -Prints almost any surface -Prints even at high production speed -Pressure height from 1 mm to 15 mm -Various inks are available for special applications
The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...
Strapping machine SMB SM1-600; good condition; cleaned and tested; Frame size 600x600mm; Bandwidth 5mm; Core diameter 200mm; Power max.42 Strappings/min.; suitable for PP-band 5mm DIN 55535; Stand-up device; Footswitch. Strapping machine SMB SM1-600; good condition; cleaned and checked; frame size 600x600mm; band width 5mm; core diameter 200mm; speed up to 42 straps/min.; used for PP-band DIN55535; floor mounted machine; foot switch.
Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg
Attention: Before purchasing a used universal tester / tractor, consider the old, used machine (all?) need new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – an expensive impasse! Purchase, pickup, software update (if possible?), commissioning, modernization are more expensive than a new galDABINI machine Quasar 600 kN incl. load cell 600 kN, Latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 | 200 | 250 for tests on steel, reinforced steel, plastic, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Q ...
Technical data for the workbench frame: Manufacturer: Stow Type: Pal Rack NS Basic dimensions: Width: 1,550 mm Depth: 600 mm Height: 900 mm The scope of delivery includes: 02x Workbench stand, used Material color: blue Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted truss ) 04x Workbench trusses, used Material color: orange Box profile: 80 x 50 mm Clear width: 1,350 mm 08x Locking pins, used Finish: sendzimir galvanized To secure the longitudinal members against unintentional lifting The images serve to illustrate the material. The colour of the material may vary. - The workbench racks are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 working days. General information about the product: This item is available f ...
used
SLEEVE APPLICATOR CLEVER GS 602. performance on PET/Glass bottles: 45000 b/h : 0,4-0,5 L 24000 b/h : 1,5 L 22000 b/h : 2 L
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: Length: 92cm Width: 164cm Height: 150cm Electric power: 1.5kW Delivery time: After the payment, from the stock
New machine 24-month warranty Benefits: + Solid construction + Boiler, central rod and spiral made of stainless steel + Drive with two motors (spiral & boiler) + Flour dust hood closes gently with dampers, with auto shut-off + mobile machine, on swivel wheels, with fixed boiler + Dirt protection cladding for adjustable feet + short kneading time with excellent result + Switches for manual or automatic operation + 3 timers + 1 reverse gear for mixing, 2 forward gears for kneading + fast spare parts supply within 1-2 business days Technical data: - Flour capacity: 4 - 40 kg - Dough capacity: 6 - 60 kg - Boiler volume: approx. 95 litres - Boiler outer edge: 640 mm - Engine power: 3.75 kW (kneading spiral & boiler drive) - rpm at 50Hz (1st / 2nd gear): 135 / 270 - Connection values: 400V - 3Ph - 50Hz - 16A CEE plug - Dimensions in cm: 68 x 108 x 128 (WxDxH) - Heigh ...
Capacity: 600 l Heating: steam, 127 kW, 8 bar Outside dimensions 110 x 130 x 135 cm (HxWxD) Inside dimensions 60 x 109 x 88 cm (HxWxD) Control: MC K Mouting Voltage: 230/400 V , 50 Hz Cover: insulated,with springs and hinges of stainless steel, opening 90° Drainage: piston – type drain cock Equipment: valves for cold and hot water
GRONINGER LIQUID FILLING LINE FILLING AND CLOSING MACHINE DFVK 6000 - STOPPERING MACHINE KVK 108B Anno di costruzione: 2002 Output: 12,000 per hour (200 per min), based on 3ml vial, 1ml fill Filling range: 0,2 ml- 135 ml (equipped with according pumps) Diameter range: 14-35 mm Height: 30-100 mm PLC: Siemens PLC type S7 300 Guarding: Stainless steel frame with safety glass The vial filling and closing line is capable of running in the following ways: - Fill and half-stopper a batch for freeze-drying - Overseal a stoppered batch from after freeze drying process - Fill, stopper and overseal a liquid batch Line under ORABS - Open Restricted Access Barrier System. Full set of operation manuals and technical documentation. Various spare parts.
Machine details Bearing number 1105-03112 Machine type Machining Center - Vertical Make FAMUP Type MCX 600 Built in 1995 Control type CNC Warehouse HAGUENAU Country of origin Italy Delivery time immediately Freight base EXW 'as available' Technical details x-path 600 mm y-path 400 mm z-way 400 mm Control SIEMENS 810 D - Travel X-axis 600 mm - Travel Y-axis 400 mm - Travel Z-axis 400 mm - Number of NC axes 3 - Clamping surface (left-right) 400 mm - Clamping surface (front-rear) 400 mm - Workpiece weight (max) 300 kg - Speed range up to 6000 rpm - Tool holder ISO SK 40 - Drive power (max.) 11 kW - Number of tool positions 18 - Tool diameter max. 75 mm - Tool change time 2 s - Space requirement length 3200 mm - Space requirement width 2,900 mm - Total height 2600 mm - Total weight approx. 3500 kg Information Machine under power CNC SIEMENS 810 D Count ...
Reference number 20138 Brand MWM SN 6010611374 Model TBD 601 6K Power 375 HP RPM 1350 HP General condition RUNNER ENGINE Status AVAILABLE SPECIFIC INFORMATION Flywheel Included Governor MECHANICAL Exhaust system DRY Turbo DRY Cooling system Sea Water cooled/Keel Cooled Starter 24V Remarks COMPLETE ENGINE FIXED ON STEEL FRAME DIMENSIONS LxWxH (cm) 2400 mm x 1400 mm x 1850 mm Weight (kg) 2900 KG
The scope of delivery includes: 01x Folding box / folding box, used Manufacturer: Bekuplast Type designation: Clever Fresh Box Material color: black External dimensions: 600 x 400 x 410 mm (LxWxH) Internal dimensions: 570 x 370 x 400 mm (LxWxH) Dimensions folded: 600 x 400 x 83 mm (LxWxH) Volume: 79 l Weight: approx. 3.05 kg / pc. Material: Polypropylene Handles: open on the front wall side Side Finish: Openwork Bottom finish: openwork Note: - It is a used item, there may be scratches, dents and traces of use exist. - The price shown is the same as the pick-up price incl. VAT per piece! General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which can be queried separately depending on the place of delivery or scope of delivery.
Product number: 1915 Type: BR3000/600 Serial number: 888 Belt width: 600 mm Frying length: 3000 mm Heating: thermal oil, 90kW Power: 3 x 380V, 50Hz, 3.6kW Dimensions: 5650 x 1800 x 3450 mm Weight: 2150 kg Hold down belt, sediment removal, circulation pump, oil level control Prepared for CO2 fire extinguisher
The scope of delivery includes: 01x Stacking crate / Euro container, used Manufacturer: Bekuplast Type designation: Basicline Material colour: grey Product dimensions: 600 x 400 x 320 mm (LxWxH) Internal dimensions: 567 x 367 x 317 mm (LxWxH) Volume: 64.5 l Weight: approx. 2.28 kg / pcs. Material: Polypropylene Handles: closed Front wall: foldable on one side Side version: closed Bottom finish: smooth, closed Note: -Insensitive to acids and alkalis -Cold and heat resistant It is a second-hand item, there may be scratches, dents and traces of use exist. The price shown is the same as the pick-up price incl. VAT per piece! General information about the product: This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which can be queried separately depending on the place ...
CNC - controlled electro-hydraulic precision long-bending machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 6,050 mm, extension 1,250 mm, maximum sheet thickness ST42 - 3 mm, maximum bending angle 135° - upper cheek opening range up to 200 mm, rear stop with foldable stop fingers - stop range 12 to 1,200 mm - inclination up to 40° - travel speed adjustable up to 500 mm/sec, working height approx. 830 mm, drive power 7.5 kW, dimensions approx. 6.4 x 1.8 m x 1.5 m, weight approx. 8,500 kg
Product number: 1930B Type: BR4500/600 Serial number: 939 Belt width: 600 Frying length: 4500 mm Heating: thermal oil Power: 3 x 380V, 50Hz, 10kW Dimensions: 7400 x 1900 x 3150 mm Weight: 2750 kg Hold down belt, sediment removal, circulation pump, electric hoists, oil level control Prepared for CO2 fire extinguisher
Wire EDM machine SODICK A 600 manufactured in 1997. Technical parameters of the SODICK A 600 EDM machine: - table travel (X axis): 600 mm - table travel (Y axis): 400 mm - Z axis travel: 270 mm - maximum dimensions of the processed part (width x depth x height): 800 x 550 x 260 mm - maximum weight of the workpiece: 900 - auxiliary table travel (U axis x V axis): 70 x 70 mm - wire diameter: 0.1 ~ 0.3 mm - maximum wire speed: 250 mm / sec. - wire tension: 0.2 ~ 2.8 kgf - cutting inclination at an angle: + -15 degrees per 100 mm of thickness - height from the floor to the surface of the working table: 1000 mm - machine tool dimensions (width x depth x height): 2188 x 2645 x 2100 mm - machine tool weight: 3700 kg
maximum number of results exceeded
please refine your search
