deco tornos used for sale

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Video station G29 from Concad, SN: 170016-0A-000.01. In good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in ...

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

3 pieces AL-KO POWER UNIT 200 P, SN: 2433366784. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Two belt conveyors in good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Movitec VCF 10/5 B hydro pump unit 2.2kW (1.71kW) 50 Hz Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Six vacuum cleaners from Nilfisk_Gemod model CTS40 M Z22, SN: 3820152600231. 400 V, 4.00 kW, 50 Hz. Devices operational. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912 ...

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Two belt conveyors without drives. Good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Oil cooler from KraussMaffei, model UKTM. In good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Kuhnast UV6 furnace, model QSTS_3D-550_2017003, SN: 2017003. Good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (pai ...

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

UV2 furnace, model QSTS_3D-1000_2011001. Good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13 Y Variocam: VNSA Controlled spindle stop device N

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13 Y Electric control-box Controlled clutching device

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Electric control-box Controlled clutching device

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13 Y Electric control-box Speed accelerator Controlled clutching device

Technical data Diameter of work admitted: 7.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 8.00 mm Max. treading diameter: 6 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1400 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 2.0 HP Machine´s weight about: 520 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1400 mm Various accessories: Combined 3-spindle attachment: 13Y Simple spindle stoping device Electric control-box Controlled clutching device

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment Back drilling attachment Slotting attachment Pick-up attachment 34 DA,

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Pick-up attachment 34 DA, Controlled clutching device

Technical data Diameter of work admitted: 10 mm Max. turning length: with flat cames: 60 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1650 rpm up to: 11680 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1500 mm Various accessories: Combined 3-spindle attachment: 13Y

Two conveyors and a SEPRO cage. In good dondition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

Technical data Diameter of work admitted: 13 mm Max. turning length:: 70 / 50 with bell cames: 110 / 50 mm Spindle hole: 13.5 mm Number of tool cutters: 5 (8 x 8 mm) Spindle speeds: from: 700 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 1800 kg Overall dimensions machine: Length: 2000 mm Width: 1055 mm Height: 1750 mm Various accessories: Combined 3-spindle attachment: 13Y Controlled spindle stop device O Speed accelerator: VNSA

Bakery shop fittings Aichinger ArtLine III sales counter 3.9 m shop counter bakery sales stand CoolMaxx HotMaxx CoolBottle, used from 11/2018 Type: ArtLine III Manufacturer: AICHINGER GmbH, Ostring 2, 90530 Wendelstein, Germany Purchase according to invoice: 11/2018 Properly and professionally dismantled and stored on pallets in our warehouse. Very good condition. Disc type: ARTLine OK 1252mm I ZP 330mm Countertop Type: Postforming APL Depth: 1060 Front Type: Decor APL Decor Edge: A1 MGM_Schwarz APL Postforming: G/A1 MGM_Schwarz Display: table-level Price bar: EV 1 Front décor top: E/H3395 ST12_Corbridge natural oak Front edge top: H3395 ST12_Corbridge natural oak Version: Standard (V20) Front profile: EV 1 Skirting board: EV 1 Pocket tray type: 1-tube/Waab CNS The shop fittings consist of: #Theke Free-standing end side for modules with glass attachment, ...

64" Latex Printer HP Latex 570 Large Format Printer Plotter 1.63 m 64 inch Type: HP Latex 570 N2G70A Manafacture: HP Development Company Year of construction: 2019 For banners, displays, double-sided banners, trade fair/event design, outdoor signage, interior posters, interiors, lightbox film, lightbox paper, wall decorations, POP/POS, posters, textiles and vehicle graphics. Properties: - Up to 1.63 m (64 inches) roll width - Printing of SK rolls up to 100 m and 55 kg - HP 871 Latex Ink Cartridges (7x3 litres, black, cyan, light cyan, light magenta, magenta, yellow, HP Latex Optimizer) - Printer status light - spindleless system Specifications: Resolution: max. 1200 x 1200 dpi Print width: 64 inches = 1.63 meters Speed: max. 91 m²/h (1 pass) Dimensions: 2560 x 792 x 1420 mm Weight. 250 kg incl. accessories: - Output plates M0E29-60258 - Removable Cutte ...

Technical data Diameter of work admitted: 16.00 mm Max. turning length: with flat cames: 80 mm with bell cames: 150 mm Spindle hole: 17.00 mm Max. treading diameter: 12 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 28 from: 485 rpm up to: 5450 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 1450 kg Overall dimensions machine: Length: 2200 mm Width: 1000 mm Height: 1700 mm Various accessories: 3-spindle drilling attachment: 12 V

Mass International conveyors 2 pcs + turn. Good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

Technical data Diameter of work admitted: 16.00 mm Max. turning length: with flat cames: 80 mm with bell cames: 150 mm Spindle hole: 17.00 mm Max. treading diameter: 12 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 28 from: 485 rpm up to: 5450 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 1450 kg Overall dimensions machine: Length: 2200 mm Width: 1000 mm Height: 1700 mm Various accessories: Speed accelerator: VNSA Variocam 3000 Set of loose pulleys 3 spindle front attachment: 12 V

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 11.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1700 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1440 mm Width: 900 mm Height: 1600 mm Various accessories: Combined 3-spindle attachment: 13 OA Back drilling attachment: 12 AD Electric control-box Swivelling stop Central lubrification

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 11.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1700 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1440 mm Width: 900 mm Height: 1600 mm Various accessories: Back drilling attachment: 12 AD Electric control-box Swivelling stop Central lubrification

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 11.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1700 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1440 mm Width: 900 mm Height: 1600 mm Various accessories: Back drilling attachment: 12 AD Electric control-box Swivelling stop Central lubrification

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Electric control-box Speed accelerator

Technical data Diameter of work admitted: 6.35 mm Max. turning length: with flat cames: 62 mm Spindle hole: 6.35 mm Number of tool cutters: 3 Spindle speeds: Number of spindle speeds: 3 from: 2400 rpm up to: 6000 rpm Turret slide: number of tools: 4 Voltage 50 Hz 3x: 380 Volt Total power required: 2.5 HP Machine´s weight about: 1150 kg Overall dimensions machine: Length: 1500 mm Width: 1000 mm Height: 1600 mm Various accessories: Decoiler Straithening device Coolant system turret

Three pieces of belt conveyors from Mass International. Good condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in ...

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13 Y Back drilling attachment: 12 AD Pick-up attachment: 34 DA Electric control-box

Technical data Diameter of work admitted: 10 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 10 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1200 mm Width: 900 mm Height: 1450 mm Various accessories:

Unused KEB inverter, model 17F5K1G-Y0DF. SN: 17FSK1G-Y0DF. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Drilling attachment 12 U Variocam: VNSA Electric control-box Preparation for loader: Barboy Rocker arm with 1/1000 mm

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Variocam: VNSA Controlled spindle stop device N Electric control-box Preparation for loader: Barboy Rocker arm with 1/1000 mm

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 3.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment Electric control-box Speed accelerator

turning diameter over bed: 50 mm spindle passage: 26 mm turning length: 275 mm total power requirement: 12 kW weight of the machine ca.: 4500 kg CNC-Sliding Headstock Lathe, Opposite Headstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Membrane press for gluing doors, curves and other wooden elements Dimensions mm: 2400 x 1120 Heating by electrical resistance Complete with decompressor, timer and tarpaulins

Standing seam metal roof machine F3 Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing s ...

Cut-to length slitting machine SM-1250х8 Cut-to-length slitting machine is used for longitudinal cutting of the metal sheets with maximum thickness 1mm, aluminum composite panels, paper, polycarbonate thanks to special cutting knives that are fixed on rolls of the slitting machine. This cut-to-length slitting machine lets you to cut the material into eight strips. The diameter of the rolls is 56 mm There are four types of the sheet metal cut-to-length machines we make: The manual cut-to-length slitting machine (cutting for 2 strips) The electric cut-to-length slitting machine (cutting for 3-4 strips) The electric cut-to-length slitting machine (cutting for 6-10 strips) The electric cut-to-length slitting machine (cutting for 12-20 strips) The operator of cut-to-length slitting machine can easily change the width of the strips and their numbers. There are special scr ...

Unused large spindle from Reckhert. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (paid in full).