deckel s1 used for sale

x-travel: 290/300 mm y-travel: 160 mm z-travel: 330/340 mm engine output: 1,5/1,9 kW weight of the machine ca.: 0,7 t Optical condition: very good: Mechanic: very good: The machine can be viewed under current.: Heidenhain digital readout, axes:: 3 Aktiv vertical milling head Sk 40: Sk 40 S 20x2 operating instruction: operating key: ATTENTION: We would be happy to provide you with a free offer. However, please have Understand that we only have inquiries with a complete address to edit. 2102-2047 380 V, 50 Hz, with CEE plug and cable Color green Compliance with the Machinery Directive on request at extra cost (see list below) # milling protection device electr. secured, integrated in the emergency stop chain! ° already available: ° Engine brake ° Safety handwheels ° 2 x emergency stop switches ° Mandatory and prohibition signs according to the latest standard ° Electrical acce ...

X-travel: 800mm, y-travel: 710mm, z-travel: 710mm, B-travel: 360°, controls: SIEMENS SINUMERIK 840D, operational hours counter: 17,225h, including accessories.

X-travel: 560mm, y-travel: 560mm, z-travel: 510mm, pallet clamping surface: 400x400mm, tool cone: SK40, rotational speed: 18,000/min, controls: SIEMENS 840D, weight: 8.2t, without accessories, with documentation.

X-travel: 800mm, y-travel: 700mm, z-travel: 600mm, rotational speed: 12,000/min, max. tool diameter/ length: 80/ 350mm, max. tool weight: 10kg, max. load: 800kg, operational hours counter: 52,199h.

clamping diameter: max. 17,5 mm grinding spindle speed: 4500 U/min relief angle: max. 45 ° total power requirement: 0,55 kW weight of the machine ca.: 120 kg dimensions of machine L x W x H: 0,54 x 0,47 x 1,31 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm table surface area: 800 x 460 mm spindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/min feeds: 10 - 1000 mm/min rapid traverse: 2 m/min table load capacity: 600 kg quill stroke: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,0 t dimensions: 2,44 x 1,8 x 2,05 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. spindle rotational speed: 15,000/min, controls: Dialog 112, tool changer and cooling lubricant transfer tube are defective, including fourth axis.

X-travel: 2500mm, y-travel: 920mm, z-travel: 820mm, max. rotational speed: 18,000/min, spindle holder: SK40, number of tool places: 30, connected load: 96kVA, controls: Heidenhain iTNC 530m, weight: 25t, operating/spindle hours: 118,712/ 10,654h, with documentation, without tools, has been serviced regularly, an on-site inspection is possible.

Control: Heidenhain TNC 430M, connected load: 30kVA, operating hours: 27,879h, the machine is heavily used, X- and Y-axis need to be overhauled, the motor of the Z-axis is defective, an on-site inspection is possible.

Travel X/Y/Z: 630mm/560mm/560mm, tool holder: SK40, max. speed range: 12000rpm, table size X/Y: 1000mm/600mm, groove spacing: 63mm, number of grooves: 9/14H7, max. table load: 500kg, table weight: 400kg. Control: Heidenhain MillPlus (V41X), weight: 6500kg, weight of cooling lubricant system: 1000kg. Including chip conveyor, control panel and manual control panel, AC servo motor. Documentation available. On-site inspection is possible.

Travels X/Y/Z: 885mm/600mm/600mm, travels B/C: -10° - 110°/360°, rapid traverse X/Y/Z: 9000mm/min, speed: 28000rpm. Table dimensions X/Y: 950mm/650mm, operating hours: 90711h, spindle hours: 19457h. Including workpiece measuring probe, tool changer with 100 places.

Max. rotational speed: 2000/min, with instruction manual.

x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm table surface area: 800 x 460 mm spindle taper: SK 40 control: CONTOUR 1 spindle turning speed range: 50 - 2500 U/min feeds: 10 - 1000 mm/min rapid traverse: 2 m/min table load capacity: 600 kg quill stroke: 80 mm total power requirement: 7,5 kW weight of the machine ca.: 2,0 t dimensions: 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-travel: 710mm, y-travel: 600mm, z-travel: 500mm, rapid traverse: 6000mm/min, max. rotational speed: 6300/min, tool holder: SK 40, table dimensions: 550x1000mm, NC rotary table diameter: 630mm, controls: Dialog 4.

Rapid traverse: 3000mm/min, connected load: 12.5kVA, length: 2300mm, width: 2500mm, weight: 1.83t, the display is defective and the z-axis needs overhauling.

X-travel: 400mm, y-travel: 400mm, z-travel: 400mm, feed rate: 2-3600/min, rapid traverse: 4000mm/min, including documentation, without spare parts, gear for speed under 500/min is defective and the milling spindle is losing oil.

Rotational speed: 0-3150/min, weight: 3.38t.

Lid S1 Tool Grinding Machine

No. 5152: 1 gebr. Tool milling machine Fabr. LID , Type FP - 4 M,

Length: 1600mm, width: 1400mm, height: 1600mm, weight: 1.25t, with documentation and accessories, an inspection is possible.

X-travel: 560mm, y-travel: 500, z-travel: 450mm, rotational speed: 40-4000/min, connected load: 16.5VA, control: Contour 3, weight: 2.7t +295kg control cabinet, spindle y-axis defective, fourth axis defective, on-site inspection is possible.

x-travel 300 mm y-travel 300 mm z-travel 400 mm CNC control DIALOG 11 Spindle speeds 31 - 5,000 rpm Spindle holder ISO 40 Table size 620 x 390 mm Table load 250 kg Feeds infinitely variable 2 - 6,000 mm/min Drive power 5.5 kW Pinole stroke 80 mm Coolant device Operating voltage 380 V Total power requirement 11.0 kVA Machine weight approx. 1.65 t Space requirement approx. 1.85 x 1.90 x 1.80 m Electrical cabinet 1.35 x 0.70 x 1.70 m Coolant box 1.00 x 0.45 x 0.20 m

Control system: Contour 2 lid, the machine has no operating hours counter, the control system parameters must be reloaded onto the machine, the buffer battery is empty, an on-site inspection is possible.

Including documentation, unused incremental length measuring scales for X, Y, Z-axis and display, on-site inspection is possible, has been regularly serviced.

Travel X/Y/Z: 400mm/400mm/400mm, spindle speed: 40-4000rpm, quill stroke: 80mm. Table size: 710mm x 460mm. Dimensions X/Y/Z: 4100mm/4200mm/2000mm, weight: 1900kg. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 630mm/500mm/500mm, max. spindle feed X/Y/Z: 24m/min, max. cutting feed rate: 12m/min. Max. Spindle speed: 8000rpm, table dimensions X/Y: 800mm/500mm. Tool holder: ISO40, tool capacity: 24, max. tool weight: 6kg, max. tool diameter/length: 100mm/300mm, tool change time: 3.6s. Control: Heidenhain TNC 426M, operating hours: 12100h, dimensions X/Y/Z: approx. 2600mm/2400mm/2600mm, weight: approx. 4500kg. Documentation available.

Control system: CNC532, axes: 3, operating hours: 19565h, travel X/Y/Z: 600mm/400mm/500mm.

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2016 S25 003004 400 V, 50/60 Hz, with CEE plug and cable Color: light gray motorized height adjustment, axial grinding spindle adjustment Equipment: Opto-electronic measuring device with measuring electronics Image processing, PC (Original ISOG) CCD camera and monitor Dividing head Sk 40 with dividing disk 24 R 1 dividing disk each 14, 16, 18 Tightening screw M 16 Counter bearing complete with 4 center punch points Center point Sk 40 with driver Twist-u. Relief grinding device with rac ...

max. grinding diameter: 238 - 620 mm grinding length: 190 mm workpiece length: 380 - 940 mm spindle turning speed - stepless: 2 - 12000 U/min current capacity: 380 kVA power capacity - grinding motor: 1,1 kW total power requirement: 2,2 kW weight of the machine ca.: 0,6 t Mechanic: very good: Optical condition: very good: The machine can be viewed under current.: operating key and instruction: 2189 400 V, 50 Hz, with CEE plug and cable Colour: body pastel turquoise RAL 6034 Stand blue-grey RAL 7031 Motorized height adjustment, axial grinding spindle adjustment Machine as new Accesories: SK 40 dividing head with 24 R dividing disc Graduated disc 20 R Tightening screw M 16 69871 Spiral and relief grinding device with rack housing Counter bearing with 4 tailstock centres Center point with driver Dressing device Dressing diamond Radius grinding device SK 40 complete with se ...

Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg.

Travel X/Y/Z: 500mm/400mm/350mm, distance table-pin nose: min. 250mm/max. 600mm. Work table clamping surface X/Y: 650mm/450mm, max. table load: 500kg, erosion limit load: approx. 300N. Internal dimensions of work bowl X/Y/Z: 845mm/635mm/340mm, max. filling height:: 300mm, max. workpiece height: 260mm. Documentation available. On-site inspection is possible.

Key data: 1200 , 800

Clamping table in absoult as good as new condition! (Distort pictures, but table is straight!) The table comes from the area of a turbine assembly and is in top condition! Metrics: Width 1.200mm Depth 800mm Height 800mm Weight 700kg Number of T-slots 7 pieces T-slot table

Year of construction 1998 Heidenhain Siemens 810D 14900 Operating hours 24 fold tool changer Working area 630 x 500 x 500 mm Feed 1-10000 mm /min Rapid traverse 30000 m/min Tool holder ISO 40, spindle speed 1 - 8000 rpm Medium cooling device approx . 4200kgAccessories Accessories: Cooling device, el. Handwheel The machine has been revised and is in very good condition. All axes are free of backlash, run quietly and precisely. Milling spindle overhauled 2019, 0 operating hours (approx. 5.000,- Euro)

Machine is in TOP condition ! X/Y/Z: 400/220/400 mm Speed: 40 - 2500 rpm Feed: 0 - 500 mm/min Rapid traverse: 1200 mm/min Quill stroke: 80 mm Table: 700 x 320 mm Tool holder: ISO 40 Drive motor: 2.2 kW Machine dimensions (WxDxH) 120 x 150 x 175 cm Dimensions electrical box (WxDxH) 64 x 32 x 90 cm Machine weight 1200 kg Weight control cabinet 80 kg

Universal machining center Manufacturer Lid Maho Type DMU 35M Control Siemens 810 D Shopmill Travel : 350x240x340mm Speed :20-6300rpm Year of construction 2000 Spindle speeds 20-6300rpm Feed rates 2-5000mm/min Table 400x280mm Motor 5,5Kw Longitudinal travel (X,Y,Z) 350x240x340mm Machine weight ca 1600kg Tool holder SK 40 Dimensions 2000x2000x2000mm Machine has milled 100% only aluminum. Machine was only used when needed and did not run in shifts. Technical and geometrical in top condition.

x-travel: 600 mm y-travel: 700 mm z-travel: 600 mm Control: Siemens type: Millplus Table dimensions: 630x500 mm tool taper: ISO 40 Cooling through the spindle: 40 bar Tool changer: 60 Pos. no. of tables: 2 chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lid Maho DMC-200 U serie 1512 5-axis CNC universal machining center, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameter x height: 1950x1100 mm Travel X-axis: 1800 mm Travel Y-axis: 2000 mm Travel Z-axis: 1100 mm C-axis table rotation: 360° B-axis travel: -7/187° Spindle speed: 18000 1/min Spindle cone: HSK-A63 Spindle motor: 28/19 kW Magazine capacity: 120 Required footprint: 11200x12300 mm Height: 4375 mm Weight: 58000 kg For any questions about the machine, as well as a scheduling for the inspection, we ask you to contact us by phone or e-mail.

NC milling machine, 3 axis, brand cover, type FP 5NC, YOC 1986 Documents are available. The price is net. Without vice and rotary jaw chuck

x-travel: 500 mm y-travel: 300 mm z-travel: 380 mm spindle stroke: 100 mm turning speeds: 40-2000 U/min Table area: 380x800 mm Feed: 10-500 mm/min Feed: 10-500 mm/min Rapid movement: 1500 mm/min spindle taper: ISO: 40 digital readout: Elesta total power requirement: 3 kW weight of the machine ca.: 1,1 t dimensions of the machine ca.: 1,2x1,2x1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Siemens Sinumerik 810 D Travel x/y/z 350 mm / 240 mm / 340 mm Drive power // Tool holder 6.3 kW / 10 kW // ISO 40 Spindle speed range of the working spindle 20 – 6,300 rpm Connected load / weight of the machine 15 kW / 2 t Manually operated rotary table C-axis 360°/swivel range B-axis +105/-15° table load / table clamping surface 100 kg / 400 mm x 290 mm Accessories: various holders and tools according to photo Remarks: Error at startup, possibly control defective, not operational

x-travel: 885 mm y-travel: 600 mm z-travel: 600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 800 mm table width: 400 mm table load: . t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 340 mm z-travel: 250 mm Control: total power requirement: 1,5 kW weight of the machine ca.: 0,8 t Heidenh. 3 axes aktiv digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm spindle turning speed range: 12000 U/min milling-head swivable +/-: control: Heidenhain type: Mill Plus table surface area: 1000x600 mm : elktr. coolant: chip conveyor: kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel X/Y/Z 780 /560/560 mm Speed 12000 1/min Tool magazine for 60 tools SK40 2-fold pallet changer 630x500 mm NC rotary table Swivel head IKZ 40 bar Renishaw Probes Filter system Zero point clamping system in the table, Coolant reservoir Conveyor

Table length: 605 mm Table width: 195 mm Longitudinal X: 300 mm Cross Y: 160 mm Vertical Z: 290 mm CNC Brand: Heidenhain HeidenHain 3 axis Digital Active Dro Spindel Sk 40 Feeds all directions X-Axis:         300mm Y-Axis:         160mm Z-Axis:         290mm Table Length:   605mm Table Width:    195mm Table load:     150 Spindle speeds: 2000Rpm Feed rate X-Axis:1200mm/min. Feed rate Y-Axis:1200mm/min. Feed rate Z-Axis:1200mm/min. Length:         970mm Width:          900mm Height:         1660mm Weight:         850kg

Universal machining center for processing 5 pages Machine in version "increased machine accuracy" Travel x-axis 1250 mm y-axis 880 mm z-axis 800 mm Automatic swivel milling head horizontal position/ vertical position B-axis 360,000 x 0.001° Table size 1250 x 1000 mm workpiece weight 2000 kg Rapid traverses x/ y/ z 40 m/min Feed speed 15,000 mm/min Motor spindle speed range up to 10,000 1/min Drive power at 40% /100% ED 30/ 20 KW Spindle torque at 40 /100% ED 285/ 190 Nm ----- Tool magazine 60 tool positions Tool holder SK 50 ----- Space requirement machine with production package length x width x height 7.4 x 5.9 x 3.1 m weight of the machine ca. 14.800 kg Heidenhain TNC 430 IKZ 40 bar Conveyor Coolant system Probe Oil and emulsion mist separators Various tool holders SK50

CNC HORIZONTAL MACHINING CENTER Condition Used Good Condition Control Type Siemens 840D X Axis Stroke 630 mm Y Axis Stroke 800 mm Z Axis Stroke 850 mm N. pallets 12 Table dimensions 500 x 500 mm Max. workable weight 600 Kg Spindle speed 18,000 rpm Cooling lubricant through spindle center 80 bar Tool holder HSK-A63 Tool magazine 303 positions Renishaw OMP60 infrared probe Continuous table 360,000 positions Magazine for round pallet RS12 Accessories Chip Evacuator, High Pressure

Control: Siemens Travel X/Y/Z: 350 x 240 x 340 mm Spindle speed 6300 min-1 Tool holder SK 40 Manual swivel rotary table Tool holder Vice Accessories