We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,265 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
The monitor is conceived so he at few minutes of the operator independently after the enclosed instructions it can be exchanged. The control timing is preset i.e. the monitor is ready for use immediately. Micro-adjustments can be changed about the self explicatory menu ON SCREEN arbitrarily by customer wish.The connections for the graphics signal are by a conector 20pol. he can not wrong are put on is able marked. The monitor TFT is fastened to the same points like the original monitor and this guarantees easy installation.
used
Stahlblech lackiert Innenliegende Rohre: 200 mm lang à 25 mm - Width 635 mm - Height 400 mm - Depth 420 mm - mobile - Wiht mobile cleaning basket aus Stahlblech, 395 x 620 mm - Location on stock
used
Description: Consisting of 3 horizontal spindles and a counterholder weight approx.: 70 kg, Approx. Onsite Dimension. (l x w x h): 800 x 600 x 200 mm
used
used
Vertical milling head, milling head, angle milling head CCCP / USSR STANKO Type 1905 Product No: 393 Year of construction 1974 Tool holder: MK4 Hole spacing Machine flange plate: 245 x 185 mm Mounting hole: 17 mm Centering diameter on the machine flange plate: 190 mm - Drive via carrier, centric in centering diameter - Degree scaling on the flange plate 4x 90 rotatable - Degree scaling on the angle head +/-90 swivel Weight: 65 kg good condition Slot butt head bearing number 58166 and vertical milling head bearing number 58164 of identical STANKO milling machine.; used
used
used
used
Universal milling head, milling adapter, milling extension, angled milling head, universal milling angled head, milling angled head, milling head, top head -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Gear: 31 teeth -Dimensions: 505/180 / H195 mm -Weight: 30 kg
used
Sensor, write head, read head, read/write head -Manufacturer: Turck Blident, read/write head -Type: TNLR-Q80L400-H1147 -Voltage: 24 VDC -Dimensions: 415/80/H25 mm -Weight: 1.1 kg
used
Sensor, write head, read head, tactile bore measurement -from: warehouse liquidation -Product group: LF (70/455 kHz) -Dimension: 40 x 33 x 61.5 mm -Connection: M12x1 socket, 5.00 m, PU -Protection class: IP 67 -Weight: 450 g
used
Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full
used
used
used
Wohlhaupter turning head in the suitcase Wohlhaupter UPA6/3944 in a wooden case with accessories SK50 Type UPA6
used
Planausdrehkpof Wohlhaupter UPA 5 with accessories as shown. Cone ISO 50
used
diameter:500 mm tool adaptor:50 Weight:12 kg face movement each head:82 mm feeds:0,06 mm/U
used
throat:580 mm tool adaptor:drm. 130 weight of the machine ca.:0,1 t dimensions of the machine ca.:0,4 x 0,4 x 0,58 m used spindle support bearing for spindle diameter 130 mm
used
diameter:400 mm tool adaptor:MK 5 Weight:10 kg Slide cross:52 mm Good condition Wohlhaupter facing head with Morse taper 5
used
diameter:300 mm tool adaptor:40 Weight:5 kg Taper ISO 40
used
diameter:200 mm Weight:4 kg
used
diameter:400 mm tool adaptor: 50 Weight:12 kg slide adjustment:52 mm feeds:0,02 - 0,24 mm/U fine adjustment - cross:0,01 mm turning speed range:0 - 600 U/min Tool taper:22 mm
used
diameter:280 mm tool adaptor: 40 Weight:12 kg slide adjustment:50 mm feeds:0,05 mm/U fine adjustment - cross:0,01 mm turning speed range:0 - 600 U/min Boring head complete with box and accessories
used
used flat and boring head D'Andrea TA120 with SK40 mount.
used
Turning head, spindle tool, boring tool, boring tool, boring rod type 040.084S0012 Tool holder: SK40 - DIN 69871 Boring rod diameter: 70 mm Machining diameter: 75-120 mm Tool insert: triangle 10.5 mm - Tool on the pictures set to approx. 108 mm Machining depth: max. 200 mm Tool Total length: 300 mm Net weight: 6.5 kg Used, but good condition; used
used
Universal face and boring head LENZ Type LPA 1S Spindle tool, spindle head similar to WOHLHAUPTER UPA3 Tool holder: SK 40 - M16 Adjustment accuracy: 0.01 mm - Accessories as shown - Storage box Net weight: ca.5 kg good condition; used
used
Face and boring head NAREX Vhu 80 ( Vhu80 ) Mounting: SK50 in wooden case used, tested ! Dimensions: 420 x 410 x 155 mm
used
Face and boring head WMW C 100 - 40 TGL 32680 Mounting: SK40 Rotary chisel: Ø 20 mm used, tested ! Dimensions: 190 x 100 x 83 mm
used
Face and boring head WMW B71 TGL 2607.1 mount (machine side): SK40 with insert mount used, tested ! Dimensions (face and boring head): 216 x 65 x 70 mm
used
Fine boring head, boring head, fine turning tool WALTER B2110M B2110M.0.25.73.029.01 Cutting edge diameter: 22 - 29 mm Total length: 80 mm New ! Dimensions ( fine boring head ): 80 x 25 x 25 mm Dimensions ( transport box ): 88 x 35 x 35 mm
used
Facing and boring head PAGUS MK4 holder (machine side): MK4 with internal thread M14 x 2.0 Depth: 30 mm holder ( turning chisel ): 8 x 8 mm / 2x Ø 10 mm used, tested ! Dimensions: 202 x 57 x 55 mm
used
Face and boring head, with impact cutter PAGUS MK4 holder (machine side): MK4 with internal thread M16 x 2.0 Depth: 30 mm receptacle ( turning chisel ): 8 x 8 mm used, tested ! Dimensions: 285 x 95 x 110 mm
used
Boring head, spindle head, drill head, grooving head, grooving head, spindle drilling head, boring head, spindle tool -Quantity: 2x spindle tools -Intake: SK50 -Spindle dimensions: 145-230/225-310 mm -Price: complete -Weight: 14 kg/pc
used
Boring head, spindle head, boring head, grooving head, grooving head, spindle boring head, boring head, spindle tool, facing and boring head -Boring head: Recording MK5 3 pieces -Tool holder: 8x8 mm / 35x12 mm / 12x12 mm see photos -Transport dimension.: 530/160/H45 mm -Total weight: 10.7 kg
used
Boring head, spindle head, boring head, grooving head, grooving head, spindle boring head, boring head, spindle tool, facing and boring head -Manufacturer.Schmid, facing and boring head type UBS GR.1 -Intake: MK4 -Dimension.: 222/87/80 mm -Weight: 3.1kg
used
Boring head, spindle head, drilling head, plunge drilling head, grooving head, spindle drilling head, boring head, universal boring head, boring tool, facing head -Manufacturer: Schmid, plan and boring head -Type: UBS Gr.1 -Intake: SK40 -Setting accuracy: 0.02 and 0.01 mm -Accessories: see photos -Dimensions of the case: 240/125/H100 mm -Total weight: 4.0 kg
used
Description: Tool holder: SK 40 Incl. various boring tools Approx. Onsite Dimension. (l x w x h): 500 x 400 x 200 mm, weight approx.: 20 kg
used
Description: Tool holder: SK 40 Approx. Onsite Dimension. (l x w x h): 400 x 400 x 200 mm, weight approx.: 20 kg
used
Description: Tool holder: SK 40 Incl. boring tool Approx. Onsite Dimension. (l x w x h): 400 x 300 x 70 mm, weight approx.: 20 kg
used
Description: Tool holder: SK 40 Incl. boring tool Approx. Onsite Dimension. (l x w x h): 400 x 300 x 70 mm, weight approx.: 20 kg
used
Description: Consisting of 4 pieces Tool holder: SK 40 Approx. Onsite Dimension. (l x w x h): 500 x 400 x 50 mm, weight approx.: 30 kg
used
Description: Holder SK 40 weight approx.: 25 kg, Approx. Onsite Dimension. (l x w x h): 630 x 340 x 200 mm
used
Description: Holder SK 40 weight approx.: 7 kg, Approx. Onsite Dimension. (l x w x h): 250 x 250 x 100 mm
used
As good as new, see photos!
used
We have for sale milling and borig heads for Skoda HBM IV25, IR100, IFW1, IFW2, IFW3, IFH, IOT steady rest for W200 price from 1000-5000eur
used
Shipping within Germany 8.- insured VAT not deductible
used
small die-head with 60, 80 or 100 mm die-insert, with cooling ring
used
4x RING EYE COMPONENTS AND 2x STAPLING HEAD COMPONENTS FOR STITCHING HEADS HOHNER 48/5 S
used
new accuhead, brand Kingswerk (similar to Kautex). Immediately available from stock
used
We have a wide range of dosing devices in our warehouse and workshop. Several Yamato, Ishida, Combimat multi-head scales. Lots of Rovema, Webb snail dosages! Depending on your product, your wishes and possibilities, we can offer you a suitable dosage.
used
M18L - 1 Screw Head Slitting Machine (used) without vibrating conveyor Make: MENN - Type: KS8 and KS5 Diameter range 1.7-10 mm Shank length under head 3-105 mm Power Piece/Min 27-1.850 Weight 800 kg Engine power 1.5 kW