de coiler used for sale

Description Denios IBC station for 1000 Lite Denios IBC station S made of PE – ideal for optimal storage of hazardous liquids for storing 1,000-liter containers or smaller containers, for optimal storage of various acids and alkalis as well as for oils and non-combustible cleaning chemicals Storage area integrated Collection volume 1000 l Storage location under roof Height 860 mm Width 1280 mm Length 1660 mm Material Polyethylene (PE) Capacity KTC/IBC1 Storage area Material Polyethylene (PE) Substructure with support feet Forklift movable load capacity 2000 kg Approval Construction supervisory approval (DIBt) Classification of fluids hazardous to water acute, chronic GHS 1, chronic GHS 2, chronic GHS 3, chronic GHS 4 Classification according to GefStoffV/BetrSichVOn metals corrosive, corrosive, skin corrosive, causing severe eye damage Color blue

; Power [PS]: 182; Engine: Deutz BF6M1013

2 X DEUTZ MARINE ENGINES V12 816 626 HP@1800 RPM WITH TWINDISC MG5202 2.48:1

Milling machine from a training workshop in very good condition Manufacturer lid Type FP1 Active

Set-out moulds for production PCV gutter diameter 130 mm for rain water – 17 pcs. Moulds ( made by IFW Austria DERASCON ) (embrace pipe trigger A and B ; jointly ; Holders ;outlet ; Knee ; Corners ; bottoms gutter )

-Built 03 / 2007 -with oil burner -with 2 stikken wagons -with ramp -with exhaust air hood with integrated temperature and baking time indicator -digital control -for 60x80cm / 58x78cm sheets -Door stop on the right -available in the warehouse -Door with open-cut viewing window

We offer you here a used pallet rack stand of the Manufacturer Dexion for sale. Technical data for the pallet rack stand: Shelving system: Dexion Type: P90+ Included in delivery are: 01x pallet rack stand, used Material color: sendzimir galvanized Profile abbreviation: 120 x 100 x 2.5 mm Profile type: 120/25 Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 1,800 mm high 1,100 mm deep General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

We offer you here a used pallet rack stand of the Manufacturer Dexion for sale. Technical data for the pallet rack stand: Shelving system: Dexion Type: P90+ Included in delivery are: 01x pallet rack stand, used Material color: sendzimir galvanized Profile abbreviation: 120 x 100 x 2.5 mm Profile type: 120/25 Incl. transverse and diagonal struts, Base plates The stands are pre-assembled ( screwed truss ) 2,200 mm high 1,100 mm deep General information about the article: This item is offered for pickup only. Any further desired transport or dispatch of this article is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Conveyor belt see picture Frequency controlled

Machine details Location 1105-02917 Machine type Machining Center - Vertical Make DECKEL-MAHO DMG Type DMC 63 V Built 2001 Control type Cnc Location France Origin Germany Delivery JULY 2020 Freight base from stock, freely loaded Price On request Technical details x-Way 630 mm y-way 500 mm z-way 500 mm Table size 800 x 500 mm Spindle mount ISO 40 Range 0 - 8000 rpm Feeds - longitudinal/transverse/vertical 1 - 30000 mm/min Rapids - longitudinal/transverse/vertical 30 m/min Number of tool magazine slots 24 Tool diameter at full assembly 80 mm Tool diameter at 2 free spaces 140 mm Tool length max. 300 mm Tool weight max. 7 kg Table load 500 kg Spindle motor 9 / 13 kW Control Siemens 810 D Total performance requirements 30 kVA Machine weight approx. 4.2 t Information Tested machine ready for demonstration under current YEAR OF ...

LT 05/2020

E. - Chain hoist / hoist Offer number: 20056 Make: DEMAG Type: PK 1 N-F Machine number: 2388876 Built: 1978 Technical data: - Load capacity 250 kg - Lifting height - chain path approx. 2 m - 2 lifting speeds 1 + 4 m/min - top-sided hanging hoe - Operation of the chain hoist via hand remote scanner - Cable length hand remote scanner approx. 1.5 m - Drive 400 V - Weight approx. 20 kg

Dopel membrane pump 1 inch with suspended solid pre-separator Pneumatically operated, mounted on transport trolleys on a mobile-by-mobile vehicle. Technical data: Gear ratio: 1:1 Maximum capacity: approx. 197.6 l/min Discharge quantity per cycle: approx. 0.88 l Air connection: 1/2" Nominal suction side: 1" Nominal diameter print page: 1" Maximum operating pressure: 8.3 bar Max solid diameter: 3.3mm Weight: approx.10 kg Lukra pumps, basement pumps Special price

Properties: Used roller conveyor from the manufacturer Mannesmann / Dematic Condition: fully functional with traces of usage Ideal for fast material transport Specialist dismantled and packaged Drive: Round belt Incl. SEW motor 0.55 KW Stock 2 pieces Technical data: Dimensions of the roller conveyor Total length: 600mm Total width: 700mm Roll width: 610mm Roll diameter: 50mm Railway consists of 10 rollers Information on the framework Height: 165mm Width: 35mm Roller track The roller conveyor is ideal in the picking zone for interlocking machines or work places and to optimize the internal flow. During transport, the roller conveyor can feed sensitive and different sized containers, boxes or other packaging and article units to the feed-off or dispensing point and also serves, for example, as a connecting line in front of or between production and mach ...

- travel range: X= 485, Y= 385, Z= 380 mm - table size: 800 x 460 mm - tool holder: SK 40 - dimensions LxWxH: 2440 x 1800 x 2100 mm - weight: ca. 2.000 kg

Machine details 1105-02953 Machine type Machining Center - Vertical Make DECKEL-MAHO (DMG) Type DMC 64V Built 2002 Control type Cnc Location Haguenau Origin Germany Delivery Right away Freight base from stock Price On request Technical details x-Way 640 mm y-way 600 mm z-way 500 mm Control HEIDENHAIN TNC 530 Machine weight approx. 8 t Information 1 gebr. CNC vertical BAZ Fabr. DECKEL-MAHO Type DMC 64V linear, Y.O.M. 2002 1 used CNC Vertical Milling Center DECKEL-MAHO type DMC 64V linear, built 2002 WITH 2 AXIS PART APPARAT INCLU CNC Control HEIDENHAIN TNC 530 30-fah tool changer Conveyor 30-fold ATC chip conveyor Technical data / technical details: X-Way / X-travel 640 mm Y-way / Y-travel 600 mm Z-way / Z-travel 500 mm Spindle holder / spindle taper SK40 Speed range / spindle speed 0-12000 rpm Feed range X , Y , Z / feed range X , ...

We offer two Deutz/MWM type for purchase: TBG 604 CV16. The CHPs ran flawlessly until they were decommissioned. Scope of delivery: engine, generator, control cabinet, gas section, exhaust heat exchanger, silencer and documents.

Diameter cable: approx.18 to max. 180 mm Separation speed: approx. 32 m/min Drive control: approx. 11 kW Dimensions: approx. 1880 x 1400 x 1560 mm Weight: approx. 1,900 kg Knife adjustment: hydraulic Height adjustment: hydraulic Condition: used, operational

DETROIT DIESEL 8V 71 TI 380 HP - 2100 RPM Listing ID 20093 Make DETROIT Model 8V 71 TI - 24V STARTER - Serial No. Cylinders 8 V / Inline V Power 380 HP RPM 2100 RPM General Info Condition: Runner Application: Marine Weight (kg): 1300 KG Cooling : Water Cooled WITH EXPANSION TANK Dimension 150 x 120 x 140

DETROIT DIESEL 6 71 TI 485 HP - 2500 RPM Listing ID 20095 Make DETROIT Model 6-71ti - 24V STARTER - Serial No. 6A 0474626 Cylinders 6 V / Inline INLINE Power 485 HP RPM 2500 RPM MAX RPM 2700 General Info Condition Runner Application Marine Weight (kg) 1300 KG Cooling WATER COOLED EXHAUST / WATER COOLED TURBO / HEAT EXCHANGER Turbo WET Dimension 130 X 100 X 120

DETROIT DIESEL 12V 71 TI - 553 HP - 1900 RPM Engine Info Listing ID 20096 Make DETROIT Model 12V-71TI Serial No. Cylinders 12 V / Inline V Power 553 HP RPM 1900 RPM General Info Condition Runner Application Marine Weight (kg) 1300 KG Cooling WATER COOLED EXHAUST / HEAT EXCHANGER Turbo dry

DETROIT DIESEL 12V 71 TI - 553 HP - 1900 RPM Engine Info Listing ID 20097 Make DETROIT Model 12V-71TI Serial No. Cylinders 12 V / Inline V Power 553 HP RPM 1900 RPM General Info Condition Runner Application Marine Weight (kg) 1300 KG Cooling WATER COOLED EXHAUST / HEAT EXCHANGER Turbo dry

Key data: 500 , 41 , 22

Manufacturer: Demag Type: Ergotech 35-115 viva Built: 1998 Control: NC 4 Closing type: Hydraulic Closing force: 350 kN Tie bar distance: 280 mm x 280 mm Plate size: 410 mm x 410 mm Tool installation height: min 180 mm Opening distance: 350 mm Plate spacing max.: 530 mm Screw: 22 mm Lifting volume: 47.5 cc / 41 gram ps Spray pressure: 2440 bar General Engine: 7.5 kW Heating: 6.3 kW Dimensions: 3 m x 1.1 m x 1.6 m Weight: 2500 kg Screen text: German Additional equipment Core train: x1

Key data: 800 , 149 , 35

Manufacturer: Demag Type: 80/420 - 310 concept Built: 2005 Control: NC 4 Control Type of closure: Hydraulish Closing force: 800 kN Tie bar ratio: 420 mm x 420 mm Plate size: 580 mm x 590 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 35 mm Lifting volume: 149 gram PS / 168.3 cc Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 8.8 kW Dimensions: 3.9 m x 1.4 m x 1.9 m Weight: 4100 kg Screen text: German Optional extras Core train: x1

Key data: 1000 , 205 , 40

Manufacturer: Demag Type: 100/420 - 430 concept Built: 2004 Control: NC 4 Control Type of closure: Hydraulish Closing force: 1000 kN Tie bar ratio: 420 mm x 420 mm Plate size: 590 mm x 600 mm WZ Installation height: 250 mm Opening distance: 500 mm Plate spacing max: 750 mm Screw: 40 mm Lifting volume: 231 cc / 205 gram PS Spray pressure: 2020 bar General Engine: 18.5 kW Heater: 11.1 kW Dimensions: 4.9 m x 1.6 m x 2.1 m Weight: 4800 kg Screen text: German Optional extras Core train: x1 Air valve: x1 Robot interface

DECKEL FP2A Universal toolroom milling machine CNC Control GRUNDIG Contour 3 Rigid angle table 390x620 mm X/Y/Z: 300 x 300 x 400 mm Spindle quill 80 mm Spindle speed 40…4000 rpm Feed 2-3600 mm/min SK 40 Spindle motor 1,6/2,0 kW Weight 1295 kg

ID NO 20109 MARINE DIESEL ENGINE Reference number 20109 Brand DETROIT Model 12V71 Power 382 HP RPM 1800 MAX RPM 1950 Serial number 12VA 085003 General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 30 Flywheel INCLUDED Governor Exhaust system WET Turbo NONE Cooling system HEAT EXCHANGER Starter INCLUDED Remarks RUNNING ENGINE SPECIFIC FEATURES Panel NO PANEL Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED DIMENSIONS LxWxH (cm) Weight (kg) APPROX 2500 KG

Reference number 20110 Brand DETROIT Model Detroit Diesel 12V-149T Power 915 HP RPM 1800 Serial number General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor VARIABLE SPEED Exhaust system WET Turbo YES Cooling system KEEL COOLING Starter DUAL 24 VOLT Remarks RUNNING ENGINE SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED Weight (kg) APPROX 6600 KG

Reference number 20110 Brand DETROIT Model Detroit Diesel 12V-149T Power 915 HP RPM 1800 Serial number General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Flywheel INCLUDED Governor VARIABLE SPEED Exhaust system WET Turbo YES Cooling system KEEL COOLING Starter DUAL 24 VOLT Remarks RUNNING ENGINE SPECIFIC FEATURES Panel INCLUDED Raw water pump INCLUDED Expansion tank INCLUDED Heat exchanger INCLUDED Weight (kg) APPROX 6600 KG

DEUTZ SBV 6 M 628 - 882 kW - 1200 HP - 926 RPM Reference number 20116 Brand DEUTZ Model SBV 6M 628 Power 1200 HP 882 KW RPM 926 General condition RUNNER Status AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor HYDRAULIC Exhaust system DRY Turbo WET Cooling system WATER COOLED Starter YES- AIR Remarks RUNNING ENGINE FEATURES Raw water pump INCLUDED Expansion tank Heat exchanger DIMENSIONS LxWxH (cm) 3200 mm x 1500 mm x 2450 mm Weight (kg) APPROX 11000 KG

Water cooler Delta DKS 110 -220 volts -0.7 kW

Industrial Metal and plastic cleaning machine: COLOR-DEC ITALY GREAT CONDITION

Devillbis Oxigene case. Beauty care and breathing oxigene suply.

Roller conveyors, Dematic, driven, approx. 1.30m wide, approx. 65m, - used - Price per meter (net) from location: 95.-€, dismantled and loaded! Manufacturer: Dematic Built: 2004 / 2013 Type: Roller conveyor Dimensions: Element width: approx. 1.30m Element length: approx. 1m = 2 Element length: approx. 1.23m = 1 Element length: approx. 1.25m = 4 Element length: approx. 1.62 = 2 Element length: approx. 2m = 2 Element length: approx. 2.06m = 1 Element length: approx. 2.36m = 8 Element length: approx. 2.44m = 8 Element length: approx. 2.74m = 1 Element length: approx. 2.87m = 2 Element length: approx. 3m = 8 Roll length: approx. 1.24m Roll width: approx. 5cm Distance between rolls: different e.g. 1cm, approx. 7cm Height: about 13cm Condition: good Available: now Location: Zwickau, later Frankenberg camp (Saxony)

Driven roller conveyor that can be rotated at right angles (90 degrees) by motor drive - used - Price (net) from location: only 1.500.-€, dismantled and loaded! Manufacturer: should be Siemens Dematic Built: Type: Length of roller conveyor: approx. 1,645m Wide element approx. 75cm Roll length: approx. 60cm Roll width: approx. 5cm Distance between rolls approx.: approx. 5cm Height: approx. 55cm Engine: SEW Length frame: one side approx. 2m, other side unknown (but can be changed anyway by the aluminium profiles Condition: good Available: now Location: Zwickau, later Frankenberg camp (Saxony)

Engine is completely Overhölt with all schleißteile new running bushes piston valves uzw uzw

Engine is completely Overhölt with all schleißteile new running bushes piston valves uzw uzw

Completely overtaken cylinder head With all sloe parts new

Cylinder head Completely Overhauled With new valves, seat ring, valve guide Also sämliche used ready to ship

Refurbished and used cylinder head also encapsulated version In stock

RECON AND USED ON STOCK SOFORT LIEFERBAR

USED PLEUELSTANGE SOFORT LIEFERBAR

Frame is in good condition and without cavitation

In good condition and ready to ship

Pistons have turned from new 10 hours spare part nr 1230 6440

Connecting rod used or used with with new socket ready to ship

Used or Used With new socket ready to ship

RECON Charging air cooler ready To be delivered also used

4 stuck new pistons with spare part nr 04092407

Ready to be delivered immediately