date used for sale

Marchesini MB430/MA305 blister line for tablets, capsules, etc. with blister machine model MB 430 for PVC/ALU blister, capacity up to 95 cycles per minute, maximum forming depth 9.5 mm, ROBOCOMBI robotized transfer of the blisters into the infeed of a horizontal cartoner model MA 305, continuous motion, carton size range min. 25 x 15 x 65 mm (AxBxH), max. 100 x 85 x 150 mm (AxBxH), capacity up to 240 cartons per minute, GUK flat sheet leaflet folder from stack, bar code reading of carton, leaflet and presence of leaflet inside carton, flap cosing for variable data (expiry date, batch no., etc.), reverse tuck closure.

Keyence Agilista 3200W High Resolution Industrial 3D Printer Material Jetting AR-M2 AR-G1L AR-G1H Type: Agilista - 3200W manufacturer: Keyence Corporation, Japan Date of purchase according to invoice: 18.05.2017 Operating time: 40,985 h Printing time: 1,907 h Specifications: - Printing material: AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (Silicone Rubber [Low Hardness]), AR-G1H (Silicone Rubber [High Hardness]) - Support material: AR-S1 (water-soluble support material) - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 μm, normal Resolution AR-M2: 20μm, AR-H1: 20μm, AR-G1L/H: 30μm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: colored touch panel - Dimensions: 95 x 70 x 136 cm - Weight 188 kg

Machine type MIG/MAG welding system Make OERLIKON Type Citomag 506 W Connection voltage 3 x 400 volts Adjustment range 30 - 500 Ampere Switching time 60 % ED at 500 amps 100% ED at 420 amps Current setting infinitely variable Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed gearbox gearboxed 4-roll gearbox Protection up to a maximum of 300 A = 32 A over 300 A = 63 A Dimensions L x W x H 1,050 x 630 x 1,050 mm Weight 237 kg Age approx. 20 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 4 mtr. long, 70 sqm 1 piece pressure reducer argon with 2 pressure gauges 1 piece spare parts box kpl. Equipped 1 piece user manual  ...

Machine type: welding rotary table Make: Merkle / Conzelmann Type CD 50/25 - 320 Connection voltage 1 x 230 V Speed range 0.25 – 2.5 rpm, infinitely variable Speed control 1 : 10 Torque 2.5 – 10 Nm Face plate diameter 250 mm Face plates - internal passage 10 mm Tilt angle of the face plate 135° Vertical load capacity 0.5 kN = 50 kg Table height 320 mm Tilting movement manual, clampable Tipping torque 90 Nm Pantograph 400 A 80 % d.c. Connection for - foot switch simple - Double foot switch - Foot remote control Age 3 years Condition: as good as new Weight 44 kg Warranty 24 months from the date of delivery Original price €2,198.00 + VAT Offer price €1,690.00 + VAT Foot switch simple with 3 mtr. cable 239.00 € + VAT 019.0.2900 Double foot switch with 3 mtr. cable 389.00 € + VAT 019.0.2901 Foot remote c ...

Machine type bolt welding system Make SOYER Type BMS-8N Connection voltage 1 x 230 volts Welding range M 3 – M 8 3 – 7.1 mm Ø Material steel, stainless steel, Aluminium, brass Welding process peak ignition According to DVS leaflet 0903 Current setting infinitely variable Welding time 1,000 – 3,000 ms Welding sequence 20 bolts / min., depending on the bolt diameter Pistol positioning welding pistol Dimensions W x H x D 320 x 300 x 120 mm Hedging 16 amps Weight 10 kg Age 12 months Condition workshop tested, as new, incl. UVV test report Scope of delivery bolt welding device with the following accessories: 1 piece welding gun PS-1K 2 pieces ground cable 3 mtr. long 1 piece transport case 1 piece user manual Warranty 24 months from the date of delivery List original price 2.490,00 € + VAT Price kpl. with above a ...

ELOPAK 1000 ml (Complete line) Machine-Model: 8-PS 80HA Year built: 2008 Electricity: 3 Phase 400 V - 177 A / Frequency: 50 Hz Air Pressure: Max: 882 KPA Min: 588 KPA Air consumption: 1350 NL/min Machine list Plate pasteurizer Coder/Date Capper Carton packer Complete converting system

Code 0776 Description Surface grinding machine Make ELB Type SWBD 030 MCNC82 Machine No. 18.346.0383 Manufacturing date 1983 Control MCNC / 82-PC Tablesize 3520 x 600 mm Table grinding size L x B x H 3000 x 600 x 600 mm Magnetical plate size L x B 3000 x 400 mm Speed table movement 0,2 – 6 m/min. Max. distance table – centre grinding wheel 850 mm Speeds vertical 3 – 375 mm/min. Speeds cross 1,2 m/min. Speeds grindingwheel stepless 750 – 1400 omw/min Grindingstone: Ø 600 x Wide:100 x Bore: 200 mm Weight 18.000 kg Motor power 37 kW – 380 Volt Accessoiries Electro table 3000 x 400 mm Grinding unit with water cooling Filtering unit with paperfilter Profile grinding unit Condition Machine is in very good condition

Code 5976 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 565 Manufacturing date 1989 ( 1990 in use ) Table size 1400 x 700 mm Grinding dimensions L x W x H 1200 x 750 ( 800 ) x 800 mm Magnetic plate size L x W 1000 x 600 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 1000 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 7,5 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 8.500 kgs Total power 12 kW – 380 Volt Accessoiries Electro magnetic plate 1000 x 600 mm from Tecnomagnete Coolant Pendel control Condition Machine is in good condition

Code 61062 Description Hydr. Surface grinding machine Make DANOBAT Type RTS - 1600 Machine No. 16 220 Manufacturing date 1975 Table size 1800 x 550 mm Grinding dimensions L x W x H 1600 x 600 x 650 mm Magnetic plate size L x W 1600 x 550 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 750 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 15 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 10.000 kgs Total power 20 kW – 380 Volt Accessoiries Electro magnetic plate 1600 x 550 mm from Tecnomagnete Coolant Vertical grinding spindel Condition Machine is in good condition

Code 81199 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 504 Manufacturing date 1987 Table size 1400 x 450 mm Grinding dimensions L x W x H 1200 x 600 x 450 mm Magnetic plate size L x W 1200 x 450 mm Table speed movement 1 - 30 m/min. Max. distance table surface – centre grinding wheel 675 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1200 rpm Spindle power 7,5 kW Grinding wheel size Ø 450 x 50 ( 100 ) x Ø 127 mm Weight 6000 kgs Size of machine 3250 x 1850 x 2600 mm Total power 19 kW – 380 Volt Accessoiries Electro magnetic plate 1200 x 450 mm from Tecnomagnete Coolant Pendel control Condition Machine is in normal condition

Machine type: TIG inverter welding system gas-cooled direct current system Make: Merkle Type TIG 300 DC Serial No. 70.381 Connection voltage 3 x 400 volts Setting range 5 – 300 amps Duty cycle 50 % d.c. at 300 amps 60% d.c. at 280 amps 100% d.c. at 220 amps Current adjustment infinitely variable max. weldable material thickness steel / VA = 8 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable compact system design Fuse 16 amps Dimensions L x W x H 535 x 230 x 465 mm Weight 26 kg Age approx. 13 years Optional accessories Connection for water cooling Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piec ...

Defender, compact scale platform, 150kg, D150BL, Ohaus, mint condition Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Maximum load 150 Kg - Readability 20 g - Approved for calibration - 550 x 420mm -10 to 40°C, - stainless steel platform - optional with complete control cabinet for display - or optional with 1 pcs. digital weighing transmitter (see photos) 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returne ...

Hypoid gearbox, I=175, TPK+050S-MF3-175-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 4,565 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: TPK+050S-MF3-175-0E1-1S11, I=175, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Free additional flange, see photos - Motor side: Centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: Centring D140mm, pitch circle D168mm x z12, - Additional flan ...

Year of construction unknown suitable for Heidelberg SM 102 Unit Cover operating side SM 102 curved design Drupa 2008 Delivery date: immediately from stock Price on request. We deliver and install worldwide!

SIMOTICS S Synchronmotor, 0,82KW, 1FK7042-2AF71-1CH1, Siemens, new -40% Special price The current new price of a similar product is € 1.761 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - SIMOTICS S synchronous motor, 0.82KW, 1FK7042-2AF71-1CH1, Siemens - rpm 3000 - n max. 9000, - With encoder AM24DQI and brake 24VDC - Smooth shaft D19mm - Incl. connection cable and patch cable 16 or 12m - Connection dimensions: Centring D81mm, pitch circle D100mm x z4, Attention: We have the complete winding drive, rewind drive D75mm and D150mm ...

Hypoid gearbox, I=500, SPK+100S-MF3-500-0E1-1S11, Wittenstein, new -40% Special price The current new price of a similar product is € 3,430 excl. VAT. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Technical data: - Low backlash Wittenstein hypoid gearbox (alpha Advanced Line) - Type: SPK+100S-MF3-500-0E1-1S11, I=500, - Suitable for servo motor attachment Siemens 1FK7042-2AF71-1CH1, - Motor side: centring D81mm, for motor shaft D19mm, plug-in sleeve, - Gearbox: centring D90mm, shaft D32mm, Attention: We have the complete winding drive, rewind drive D75mm an ...

MULTIVAC R-230 ID.NO. 2142 Multivac R-230 thermoformer for hard film with preheater. Elmoprint date unit, Winder for waste plastic, year of production 1999, Foil 322 mm Tools 3x 180 x 85 D 50 mm Max depth machine 100 mm. Very fine condition the machine has previously packed dill & parsley. Dimensions 540 x 95 cm H 200 cm.

DYNAJET 350th HELI high pressure hot water cleaner. Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for eno ...

Machine type Pulse Arc Inverter Welding System MerkLE brand Type HighPULSE 354 KW Plant No. 126.411 Connection voltage 3 x 400 Volt Setting range 25 – 350 amps Duty cycle 40 % ED at 350 amps 60% ED at 280 amps 100% ED at 250 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant Wire feed 4-roll drive DV 26 Fuse 32 Ampere Dimensions L x W x H 1,000 x 400 x 1,000 mm Weight 65 kg Age 12 months Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of welder gloves with gausty 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 1 piece i ...

Production year: 2011 Control: Unilog B6S Robot: Yes Wittmann Robot W833 Injection unit: .../2250/750 Screw diameter: 65/45 mm Specific injection pressure: 2070/2116 bar Injection volume: 1078/358 cc Injection weight: 981/325.8 g Tool closure system: 400/... Clamping force: 400 t Dimensions of the tool plate: 1450 x 1350 mm Distance between the spars: 900 x 710 mm Tool height: 1175 mm Opening distance: 600 mm plate spacing: 1775 mm Pump motor power: 75 kW Cylinder heating belts power: 29.4/12.1 kW General data: Pick-up date: Immediate Dimensions (m) LxWxH: 7.0 x 2.4 x 3.3 m Weight: 22100 kg Instrumentation: - 4 x hydraulic core - 8 x cascaded control - 1 x air valve - 1 x extendable column for changing forms - Batteries - Robots - Conveyor belt - Restricted access zone

Simatic S7-1500, inkl. Memory card, 6ES7 515-2UM01-0AB0, Siemens, mint condition -40% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Simatic S7-1500, 6ES7 515-2UM01-0AB0, Siemens, - incl. wall bracket - incl. Simatic S7 memory card, 256Mb, 6ES7954-8LL03-0AA0, Siemens, new price € 397 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions  ...

Double motor module SINAMICS, 2x3A, 6SLE120-2TE13-0AD0, Siemens, mint condition -40% Special price Attention: Original Siemens product, no replica from.. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Douple motor module, SINAMICS, 2x3A, 6SL3120-2TE13-0AD0, Siemens, - Input: DC 510-720V 7.2A - Output: 3AC 0-480V 3A/3A 0-550Hz - Control: DC 24V, Brake Output: DC 24V 2A/2A 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liabil ...

Machine type Pulse Arc Inverter Welding System MerkLE brand Type HighPULSE 454 DW Series No. 109.129 Connection voltage 3 x 400 Volt Setting range 20 – 450 amps Duty cycle 50 % ED at 450 amps 60% ED at 400 amps 100% ED at 330 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire feed 4-roll drive DV 26 Fuse 32 Ampere Dimensions L x W x H 1,100 x 490 x 1,200 mm Weight 140 kg Special accessories Rotary connection on the DV case, filter attachment Control panel in the DV box, wheels on the DV case, Control panel cover flap Age 5 years Condition workshop tested very good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable ...

Blind stitch machine with thread cutter with interval with 380 volt motor, Completely up to date

Brand new Juki 7823 upper and lower deck seam with 3 needles, needle spacing 6.4 mm, completely up to date with 220 volt servo motor

Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: ...

Control unit CU320-2 PN. SINAMICS, 6SL3040-1MA01-0AA0, Siemens, mint condition Special price Attention: Original Siemens product, no replica from.. If you have a VAT number, we will gladly issue you an invoice without VAT. Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. Technical data: - Control Unit CU320-2 PN, SINAMICS, 6SL3040-1MA01-0AA0, Siemens, - Digital Outputs 24VDC 0,5A - incl. SINAMICS Control Panel 6SL3055-0AA00-4BA0, Siemens, - incl. SINAMICS S120 Compact flash card, Performance 1, 6SL3054-0FC01-1BA0-Z, Siemens, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in  ...

LIQUIDATION of meat kneading machine of blades with vacuum of the Spanish manufacturer CATO, model AV-100. Kneading machine perfect condition, ideal for the production of a wide range of meat products. Its condition is of occasion in perfect condition (re-release), reconstructed and guaranteed. External measurements 121 cm. width x66cm depth x 144cm height, kneading capacity 100liters (80kg). 3HP connection power, built in stainless steel in its entirety especially in contact with the product and interior frame of enameled iron. EMPTY KNEADING MACHINE, VACUUM MIXER, meat kneading machine, sausage kneader, meat machinery. Machine in perfect operation, revision up to date, rebuilt and guaranteed.

Code 5976 Description Hydr. Surface grinding machine Make DANOBAT Type RT – 1200 Machine No. 565 Manufacturing date 1989 ( 1990 in use ) Table size 1400 x 700 mm Grinding dimensions L x W x H 1200 x 750 ( 800 ) x 800 mm Magnetic plate size L x W 1000 x 600 mm Table speed movement 1 - 25 m/min. Max. distance table surface – centre grinding wheel 1000 mm Speeds cross 0,1 - 5 m/min. Vertical movement 0,005 – 0,05 mm Spindle rotation 1500 rpm Spindle power 7,5 kW Grinding wheel size Ø 400 x 50 ( 100 ) x Ø 127 mm Weight 8.500 kgs Total power 12 kW – 380 Volt Accessoiries Electro magnetic plate 1000 x 600 mm from Tecnomagnete Coolant Pendel control Condition Machine is in good condition

+ + + PRE-ORDER + + + Due to the high demand, all PTO generators are currently sold out. All models are reordered and are in production. Unfortunately, an exact completion date is not yet known, as there are supply bottlenecks for important components that are required for production. Longer delivery times may be expected. A pre-order can be placed. - - - - - PTO Generator / PTO Generator --> This PTO unit is available in the power classes 18 - 65 kVA. List with prices can be found below in the text. Description: - PTO generator - 18 kVA / 22 kVA / 27 kVA / 38 kVA / 65 kVA - 230 / 400 volts - 50 Hertz - Required PTO speed: 428 rpm Digital Control / Meter: - Volt - Display (V) - Amps - Display (A) - Hertz - Display (Hz) - Power in kVA - Operating hours - Counter Sockets: - 2x 230 volts - 1x 380 Volt Other equipment: - Residual current circuit breakers ( ...

Pallet roller conveyor with turntable, 10,2m Kraus, mint condition -70% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition with traces of storage! The part was bought from a spare parts warehouse of a company, was there for some time in stock but never in operation and has little storage traces Technical data: - Pallet roller conveyor with turntable without drive, Fa. Kraus - For the transport of EURO pallets - Total length 10,2m, outside width 93cm, - 1 piece turntable manual, smooth running - 1 piece roller conveyor 4,5m - 1 piece roller conveyor 3,3m - Height upper edge of roller 345 to 450mm (adjustable) - Has been dismantled for transport - free of charge 2 used roller rails to extend the roller conveyor by 3m - We can also send you a video on request 6 months warranty We give you 6 months warranty ...

Frequency controlled pump, TPE2 80-180 N-A-F-A-BQQE, Grundfos, new -30% - Single-stage inline pump (glanded pump) with speed-controlled, fan-cooled permanent magnet synchronous motor, - 50.5 m³/h, 360 - 4000 rpm, 2.2 KW, 12.8/18m, DN80, 10bar, 3x380-500V, - Grundfos 98437605, control panel HMI 200 standard, function module FM 300 - Frequency converter MGE90LD 2-56C-IA For air conditioning of commercial buildings, heating for commercial buildings Hot water circulation in commercial properties and much more. Special price ! The current new price of a similar product is € 4.800 excl. VAT. We still have several identical pumps, but the quantity is ending. Buy more than 1 piece there is still a great discount. If you have a UID number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a co ...

Backflow preventer, Check valve, Reto Stop, DN 250, PN10, VAG, new -20% Special price ! We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price of a similar product is € 3,022 excl. If you have a UID number, we will gladly issue an invoice without VAT. As good as new in original packaging! Manufacturer date 2018 The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging. Soft-seated slanted check valve opens already at small differential pressures. Valve disc can be used on both sides, therefore double service life of the valve disc. The one-piece and all-around EPDM rubberized disc allows a completely free passage and reduces the adhesion of impurities. Suitable for both horizonta ...

Machine Type Electrode Inverter Welding Rectifier with bi-power setup Merkle brand Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Setting range 20 – 280 amps Duty cycle 35 % ED at 280 Ampere 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable weldable material thickness 7 mm Cooling inverter by built-in fan Special accessories Bi-Power setup Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 6 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece of ...

Fully functional FARO Arm Measuring Arm Prime High Precision 3D Measuring Instrument Quality Control Year of construction: December 2012 Certification date: August 2014 Number: R04-02-12-28398 Single Point: 0.016 mm Volumetric: +/- 0.023 mm Made in Germany The Best Portable Coordinate Machine (CMM) High Measurement Accuracy, Measurement Stability Reduced inspection times, automatically generates reports Ready to use in a few seconds Measure parts and assemblies quickly, easily and precisely Ideal for complex measurement tasks Solid measuring plate with trolley table, 336 kg Drawer with key Degree of accuracy: DIN 876/1 Permissible deviation: 0.02 mm Actual deviation: 0.00589 mm Checked on 05.03.2013 Made in Germany With various accessories Measuring arm case HP PC Tower Screen Keyboard Lots of software e.g. Cam2 Measure 10, Nvidia Graphics, Windows, HP

A glass bottle fruit juice hot filling line with bottles cooling tunnel Capacity: 5,000 units (1.0 and 0.75l), built between 1994 and 2014 Box line, equipped with K 1; Dirt box task on transport system, done manually K2; Bottles lid screwdriving system from Fa. Elektro Maschinenbau Rink GmbH, Type: KM 740/7K , Fabr. No 07/1813/93 Year of construction 1993 4 boxes of 6 bottles each are made at the same time the lids autom. unscrewed and put into a Containers disposed of. K3; Kettner bottle unpacking line Comm. No. 93/0604/083, Type: R09 JUN 9, Year of construction 1993 12 tulips per row x 3 are simultaneously lifted out of the box and onto a bottle tasktable with 15 V2A chain belts. K4; Box washing and turning system Enema at the bottom, outlet of the box at the top Manufacturer Fa.. Klotzki Maschinenbau, Type: Reversible wheel washer, year ...

Production year: 2011 Control: Unilog B6S Robot: Yes Wittmann Robot W833 Injection unit: .../2250/750 Screw diameter: 65/45 mm Specific injection pressure: 2070/2116 bar Injection volume: 1078/358 cc Injection weight: 981/325.8 g Tool closure system: 400/... Clamping force: 400 t Dimensions of the tool plate: 1450 x 1350 mm Distance between the spars: 900 x 710 mm Tool height: 1175 mm Opening distance: 600 mm plate spacing: 1775 mm Pump motor power: 75 kW Cylinder heating belts power: 29.4/12.1 kW General data: Pick-up date: Immediate Dimensions (m) LxWxH: 7.0 x 2.4 x 3.3 m Weight: 22100 kg Instrumentation: - 4 x hydraulic core - 8 x cascaded control - 1 x air valve - 1 x extendable column for changing forms - Batteries - Robots - Conveyor belt - Restricted access zone

; Gross weight [kg]: 4040; Inspection Date: 2024-03-18; Amount of previous owners: 1; Lift height[mm]: 1015; Maximum lift capacity [kg]: 450

Personal time attendance make Z + M type Argus J 30 PlusFabr. -No: 8383Clock: digital (time, date, day of the week)Accuracy: 15 sec./monthPushbutton: Inkjet blackBackup: 3 months in case of power failureWeight approx: 4.5 kgOutside dimensions approx: 160 x 205 x 128 mmWith- Scannerused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Locking system, MGB-L2-ARA-AM5A1-S1-R-121190 + MGB…., Euchner, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Scope of delivery: - 1 piece guard locking and monitoring, MGB-L2-ARA-AM5A1-S1-R-121190, Euchner - 1 piece handle module, MGB-H-AA1A1-R-100464, Euchner - 1 piece connection cable 18-pole incl. plug 8.4m long, Euchner Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequen ...

machine measurements: Länge ca. 12.000 mm machine weight: -- kg power capacity: 170 kW Condition: used, Specification: 12m heating duct incl. PCT - length approx.: 12.000 mm - extrusion height: 1.100 mm - extrusion direction: from right to left - belt width: 150 mm - Channel width: 190 mm - At the inlet and outlet there is a 50 kW burner each - In the PCT there is a 70 kW burner - Temperature range: 240°C to 340°C - Heating: gas heated - Belt speed: 2-40 m/min - Control: Siemens S7 Relocation date no later than mid-June 2022. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: Länge ca. 12.000 mm machine weight: -- kg power capacity: 182 kW Condition: used, Specification: heating channel + shock module incl. UHF and PCT Typ: SHF 150-120-1-147-12 - length approx.: 12.000 mm - Consisting of: 9.000 mm hot air channel, incl. UHF 3.000 mm shock module with folding infeed conveyor and PCT - UHF power: 4x 3 kW - Temperature range UHF part: 240°C - 340°C - Temperature range shock module: 240°C - 500°C - Shock module with non-driven metal rollers - Extrusion height: 1,100 mm - Extrusion direction: from right to left - At the infeed and outfeed one 50 kW burner each - PCT burner capacity: 70 kW - Heating: gas heated - Control: Siemens S7 Relocation date no later than mid-June 2022. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Unused Kegel flow pack packaging machine, model DXDZ 250B. New 2017. Device designed for packing various types of products into foil bags, model with upper foil feed, especially recommended for small, light products, e.g. sweets, soap, parts, etc. The device packs the product into a roll of foil, wrapping it around the product from the top and welding it longitudinally from the bottom and transversely on the sides, resulting in a bag. The device is operated via a clear, easy-to-use HMI panel. Independently adjustable longitudinal and transverse welding temperatures. A photocell enabling work with printed foil, with a marker, guaranteeing accuracy and high aesthetics of the final product. Rotating heating jaws, failure diagnosis system. Technical parameters: Voltage 220V, 50/60 Hz Motor power 2.4 kW Foil width: 30-110 mm Bag length: 65-190 mm or 120-280 mm Bag width 30-11 ...

Machine Type Electrode Inverter Welding Rectifier Böhler brand Type Uranos 1500 Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 30 % ED at 150 Ampere 60% ED at 125 amps 100% ED at 110 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 260 x 120 x 190 mm Weight 3 kg Age 6 months Special accessories carrying strap Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2 rows 30 piece rod elec ...

Machine type MIG/MAG inverter welding system Böhler brand Type Uranos 2000 SMC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 35 % ED at 200 amps 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Wire feed gearbox 2-roller gearbox Fuse 16 amps Dimensions L x W x H 500 x 210 x 400 mm Special accessories TIG DC welding without HF E-welding, MIG soldering Weight 13 kg Age 6 months Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece ...

Mueller Martini 315 Year of construction 1995 1 card glue 315 Robatech nozzle glue unit Hotmelt Duesenleimwerk Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Offer: Battenfeld HM 400/2250/750S Year/year 2011  ps: new screw + cylinder 65mm/ new screw+barrel 65mm  Production year: 2011 Control: Unilog B6S Injection unit: .../2250/750 Screw diameter: 65/45 mm Specific injection pressure: 2070/2116 bar Injection volume: 1078/358 cc Injection weight: 981/325.8 g Tool closure system: 400/... Clamping force: 400 t Dimensions of the tool plate: 1450 x 1350 mm Distance between the spars: 900 x 710 mm Tool height: 1175 mm Opening distance: 600 mm plate spacing: 1775 mm Pump motor power: 75 kW Cylinder heating belts power: 29.4/12.1 kW General data: Pick-up date: Immediate Dimensions (m) LxWxH: 7.0 x 2.4 x 3.3 m Weight: 22100 kg Instrumentation: - 4 x hydraulic core - 8 x cascaded control - 1 x air valve - 1 x extendable column for changing forms - Batteries - Robots - Conveyor belt - Restricted access  ...

Machine type MIG/MAG welding system Eurotronic brand Type MAG 3000 EC Connection voltage 3 x 400 Volt Setting range 30 – 300 amps Duty cycle 35 % ED at 300 Ampere 60% ED at 230 amps 100% ED at 190 amps Current setting 12 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-roller drive Fuse 16 amps Dimensions L x W x H 860 x 490 x 650 mm Weight 78 kg Age approx. 5 years Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, kpl. Equipped 1 pair of welding gloves 1 piece instruction manual  ...

Web guider ElGuider, DRB1402, Erhardt+Leimer, new -40% Special price ! We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price of a similar product is about € 4.300. If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. ELGUIDER - DRB1402 Rotary frame system Profinet with rotary frame DR 1401 in compact version for the control of a running web, with digital position controller and brushless actuator, Control frame for D100 rollers, - Size: Size 2, - Nominal width NB: 250 mm, - transfer length LUE: 250 mm - Sensor: FX 46 ultrasonic sensor, - Incl. existing cables - Sensor adjustment: Manual, Standard, - F ...

Vial labelling & packing line for vaccines, etc. in 2R vials (diameter of 16 +/- 0.25 mm x height of 35 +/- 0.5 mm) and 3 ml. vials (diameter of 16.25 +/- 0.15 mm x height of 35 +/- 0.5 mm) comprising Herma132M HC wrap-around labeller (400/min.), with infeed rotary table suitable for PP-trays with inner dimensions of 428 x 244 x 42 mm (LxWxH), Videojet DataFlex 6530 thermal transfer printer (up to 3 lines each of max. 18 variable alphanumeric characters) for printing the variable data on the labels (expiry date, batch no., etc.) with camera print and code checking, luminescence sensors for checking the presence of the labels with reject system, Siemens IPC 277E 12 color touchscreen, Siemens S7-1500 PLC, vials are leaving the labeller at 90° feeding directly into Uhlmann carton tray opener & closer (15-150 trays/min., tray size min: 30 x10 x 60 mm (WxHxL), max. 100 x 95 x 165 mm (WxHxL)) ...