ctx 500 e used for sale

used electric continuous oven CTX DZ33I, overhauled, for preparing pizza, baguette, sandwich, etc., with infrared heating system, temperature range 90 to 480 degrees Celsius, housing and conveyor belt made of stainless steel, 8.4 kW, belt width 457 mm, baking area 573 x 793 mm

CTX Toastmaster Pizza oven stainless two level pizza oven on mobile frame, stainless mesh belt, 450mm wide belt, variable speed, adjustable temp control

Tailstock for Gildemeister CTX 600

Control Heidenhain Eltropilot with new screen 8xvxsy8pfu rotation diameter 570 over bed turning length approx. 600 mm (approx. estimation) spindle bore diameter 79 mm without lathe chuck 12-position turret VDI 40 tailstock chip conveyor foot switch Operating hours approx. 55.000 rpm 20-5000 Weight approx. 5.2 to

S/s table, dimensions: 500 mm x 500 mm x 500 mm.

Belt cylinder, rodless cylinder SMC EMY1M32G-500 stroke: 500 mm piston diameter: Ø 32 mm slide: 102,5 x 132 mm pmax: 0.1 - 0.8 MPa ( 1 - 8 bar ) New ! Dimensions: 780 x 103 x 68 mm

Cat. No. 11-3600-9 new Storage Vessels / Stackable Tanks in AISI 304 with Cooling Jacket 500 + 500 Litres Standard Equipment: 3 Feet Level Indicator Tank Inlet on the Top NW 50 Diameter 920 mm Bottom and Top in Conical Shape Surface: inside IIID and outside marbled Discharge Outlet NW 50 Connection for Clap DN 50 Manhole on the front in oval shape 300 x 435 mm – pressed-in Volume: on the ground: 500 litres on the top: 500 litres Height on the ground: 1335 mm Height on the top: 1050 mm Total height: 2385 mm Surcharges/unit: Butterfly Valve DN 50 Clap Gr.37 Tapping Pipe for Clap Gr. 37 with Butterfly Valve NW 40=Clear Discharge Sample Valve Mixer 0,37 kW, 400 V, 1370 rev/min with connector for Clap size 37 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: ...

Cat. No. 11-3600-9 New V2A storage tank / combination tank / stacking tank with cooling jacket standing round on feet Standard: 3 feet Stand display with bar and scale incl. Fender filling nozzle supfront NW 50 Cone bottom bottom and top Surface: 3D and exterior marbled inside Remaining outlet NW 50 Connection for barrel hole flap DN 50 Manhole front oval 300 x 435 mm - extended Diameter 920 mm Volume: bottom (base): 500 litres top (stack): 500 litres Base tank height (bottom): 1335 mm Stacking tank height (top): 1050 mm Total height: 2385 mm Surcharges/pieces: Disc valve DN 50 Tap flap gr.37 Cutting tube for tap flap size 37 m.Disc valve NW 40=Clear drain Trial tap Agitator 0.37 kW, 400 V, 1370 rpm with connection for tap flap Gr.37 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905- ...

Used pallet rack - approx. 3.500 x 22.500 x 1.100 mm - heavy duty rack shelf 3 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well as ...

Used pallet rack - approx. 3,500 x 22,500 x 1,100 mm - heavy duty rack rack 2.2 tons Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well a ...

Used pallet rack - approx. 3.500 x 22.500 x 1.100 mm - heavy duty rack shelf Here you will be offered a very well preserved, used pallet rack - also called heavy-duty rack. With the help of the supplied locking pins, you can securely attach the trusses, making accidental lifting out of the stands impossible. We also have other storage shelves or high racks and matching accessories in stock both in used and in new condition. If you are interested, we look forward to your call. We also recommend ourselves as a supplier for complete storage and operating equipment. Request our printed catalogue. The shelving system The heavy-duty rack is a simple and practical system for the optimized storage of palletized goods. Thanks to its diverse dimensions, load capacities and extensive accessories, the heavy-duty rack adapts to any warehouse in height, width and depth as well as almost ...

Lightbox, one-sided HINRICHS FOTOFACTORY 500 x 500 mm ( 500x500mm ) max. film size: 480 x 480 mm 230 V AC 50 Hz 32 W used, aluminium housing, tested ! Dimensions: 500 x 85 x 500 mm

Compact control cabinet, terminal box, control cabinet, 1-door PAGUS 500 x 500 x 300 mm material: steel, door: aluminum door: 500 x 500 mm, left-hand hinge cut-out for monitor: 365 x 290 mm holes for switches: Ø 22.5 mm mint ! Dimensions: 560 x 510 x 350 mm

Compact control cabinet, terminal box, control cabinet, 1-door PAGUS 500 x 500 x 300 mm material: steel, door: aluminum door: 500 x 500 mm, right-hand stop cut-out for monitor: 365 x 290 mm holes for switches: Ø 22.5 mm mint ! Dimensions: 560 x 510 x 350 mm

Belt cylinder NORGREN M/146125/M/500 stroke 500 mm piston diameter Ø 25 mm 1 - 8 bar Carriage: 130 x 32 mm used, tested ! Dimensions: 700 x 85 x 70 mm

Pneumatic cylinder, standard cylinder, double-acting FESTO DSBC-32-500-PPVA-N3 1376433 stroke: 500 mm piston diameter: Ø 32 mm rod diameter: Ø 12 mm rod thread: M10 x 1,25, Length: 22 mm pmax: 12 bar New ! Dimensions: 645 x 45 x 45 mm

Pneumatic cylinders, variant cylinders, round cylinders, double-acting SMC CD85N20-500-B stroke: 500 mm piston diameter: Ø 20 mm rod diameter: Ø 8 mm Rod thread: M8 x 1,25, Length: 20 mm pmax: 1.0 MPa ( 10 bar ) Mounting thread: M22 x 1.25, length: 20 mm Mounting socket: Ø 8 mm, length: 16 mm New ! Dimensions: 625 x 24 x 24 mm

Profile cylinders, compact cylinders, pneumatic cylinders, double-acting SMC CP95SDB32-500 piston diameter: Ø 32 mm stroke: 500 mm rod diameter: Ø 12 mm rod thread ( inner ): M10 x 1,25, length: 20 mm max. 1.0 MPa ( 10 bar ) New ! Dimensions: 645 x 46 x 46 mm

Pneumatic cylinders, variant cylinders, round cylinders, double-acting SMC CD85N25-500-B-X2018 stroke: 500 mm Piston diameter: Ø 25 mm Rod diameter: Ø 10 mm Rod thread: M10 x 1,25, Length: 20 mm pmax: 1.0 MPa ( 10 bar ) Mounting thread: M22 x 1.5, length: 20 mm Mounting socket: Ø 8 mm, length: 16 mm width across flats nut: 32 mm New ! Dimensions ( without nut ): 646 x 30 x 30 mm

Welding table, straightening table, straightening flap, work table, clamping table straightening plate, straightening table, spotting plate PAGUS Working surface: 500 x 500 mm height: 120 mm used, tested ! Dimensions: 500 x 500 x 120 mm

welding table, straightening table, straightening pad, work table, clamping table worktop, straightening plate, measuring plate, spotting plate PAGUS Working surface: 500 x 500 mm height: 40 mm used, tested ! Dimensions: 520 x 500 x 40 mm

Technische Daten: - Absaugleistung 5000 m3/h - Motorleistung 5,5 kW - Drehzahl 3000 Upm - Spannung 400 V, 50 Hz - Ansaugstutzen Durchmesser 280 mm - Reststaubgehalt 0,2 mg/m3 - Filtermaterial Polyster, 2 micron - 32 Schlauchfilter 160 x 1000 mm - Filterfläche 16,3 m2 - 2 Spänesäcke, je 300 Liter - Absauggeschwindigkeit 28 m/sec. - fahrbar - Filterreinigung mit Rüttelmotor inklusive Steuerung - Abmessungen L=2350, B=960, H=2500 mm - Gewicht 400 kg

System: Mobile dewatering system on trailer Type: Chamber filter press 500 x 500 Execution: filter press Year of constr.: 2017 refurbished Number of plates: 5 + head and end plate Filter plates: PP Filter cloths: optionally available in voting on the medium Presses contents: approx. 130 dm3 Filter pressure: 15 PSI Material: product-contacting parts flange, traverses stainless steel, PP or rubberized Material: non-product-contacting parts stainless steel Pump technology: In consultation System: The system is delivered as turnkey dewatering equipment ready to plug. Visit: the systems in consultation with us in the work. Other: we deliver the equipment you used ready or refurbished adapted according to your wishes and requirements.

tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...

Engine A1050024 Motor for BOFA suction systems: Type: AD 500 IQ, AD 1000 IQ , AD 1500 IQ Engine A1050024 MA-201067 New original engine

Technical data: - Year of manufacture 2009 - transport length: 2.500 mm - working width, usable: 1.300 mm - Roller length 1,450 mm - Working height: 900 +-20 mm - Roll diameter: 64 mm - roller pitch: 125 mm - Feed rate adjustable (manual): 3-15 m/min - Installed power: 0,37 KW - Producer Superfici Elmag

Technical data: - Year of manufacture 2009 - transport length: 2.500 mm - working width, usable: 1.300 mm - Roller length 1,450 mm - Working height: 900 +-20 mm - Roll diameter: 64 mm - roller pitch: 125 mm - Feed rate adjustable (manual): 3-15 m/min - Installed power: 0,37 KW - Producer Superfici Elmag - Year of construction 2009 - Location, in stock

Welding fume extraction LINCOLN NORWELD DF-500 Volumetric flow: 500 m3/h System pressure: 1000 mm/Wg ( millimeter water column ) - approx. 0,0,098 bar Fan speed: 9200 rpm operating voltage: 380 V 3AC Power consumption: 5.5 kW Connection diameter ( inside / outside ): 2x Ø 27 / 32 mm, 1x Ø 70 / 75 mm Engine: ATB 132S 5,5 kW 380 V 3AC 50 Hz IP54 used, tested ! Dimensions: 1800 x 1200 x 970 mm

Reversing contactor, reversing load relay PHOENIX CONTACT ELR W3-24DC/500AC-9I 2297057 Nominal voltage: 24 V DC Switching voltage (max.): 550 V 3AC Load current: 9 A DIN rail bracket defective used ! Dimensions: 115 x 110 x 25 mm

Encoder, speed sensor HEIDENHAIN ROD 436.0003 - 5000 ( ROD436.0003-5000 ) 261 436 13 with approx. 1.0 m cable New ! Dimensions: 80 x 60 x 60 mm

Electronic module, power supply, power supply ENDRESS + HAUSER 50096744 set NTP 50/51/53 20-55 VAC 16-62 VDC Ex for Proline New, with documents ! Dimensions ( electronic module ): 130 x 110 x 40 mm Dimensions ( packaging ): 175 x 140 x 70 mm

Electronic Module, Input / Output Module, I/O Board ENDRESS + HAUSER 50098302 Set Commodul Iout passive/Frequency Exi for Proline New, with documents ! Dimensions ( electronic module ): 130 x 110 x 20 mm Dimensions ( packaging ): 175 x 140 x 70 mm

Encoder, speed sensor HEIDENHAIN ROD 420 C 500 ( ROD420C500 ) 227 662 50 500 L/revolution Shaft diameter: Ø 10 mm Shaft length: 20 mm Flange diameter: Ø 36 / 58 mm bolt circle diameter: Ø 50 mm 3x threaded bore: M3 x 0,3x 5, Depth: 8 mm approx. 1.0 m connection cable with 11-pin plug New, with documents ! Dimensions ( without connection cable ): 85 x 58 x 58 mm Dimensions ( packaging ): 260 x 180 x 100 mm

Encoder, speed sensor HEIDENHAIN ROD 426.0013 5000 ( ROD 426.0013 5000 ) 254 048 02 5000 L/revolution shaft diameter: Ø 6 mm shaft length: 10 mm flange diameter: Ø 50 / 58 mm bolt circle diameter: Ø 42 mm 3x threaded bore: M4 x 0.7, Depth: 8 mm 12-pin built-in plug New, with documents ! Dimensions ( encoder ): 90 x 58 x 58 mm Dimensions ( packaging ): 180 x 140 x 90 mm

Encoder, speed sensor HEIDENHAIN ROD 426 E 500 ( ROD426E500 ) 244 563 12 500 L/revolution shaft diameter: Ø 6 mm shaft length: 10 mm Flange diameter: Ø 50 / 58 mm bolt circle diameter: Ø 42 mm 3x threaded bore: M4 x 0,3x 7, Depth: 8 mm approx. 1.0 m connection cable with 11-pin plug New, with documents ! Dimensions ( without connection cable ): 70 x 67 x 58 mm

Column-mounted slewing jib crane, wall-mounted jib crane PAGUS Lifting capacity 500 kg Projection: 2000 mm Clear height: 3000 mm total height: 4000 mm < br /> electric chain hoist with rolling chassis BALKANCAR BO62 MD Load capacity: 250 kg Lifting speed: 0.066 / 0.066 / 0.0 02 m/s lifting height: 3200 mm 380 V used, tested ! Transport dimensions: 4000 x 600 x 1000 mm

Cable hoist with electric chassis, trolley BALKANCAR T 10232 ( T10232 ) Load capacity: 500 kg Stroke: 12 m lifting speed. 8 m/min travel speed 20 m/min 220 / 380 V 3AC 50 Hz IP44 without control bottle ! used, tested ! Dimensions: 870 x 600 x 500 mm

Cable hoist with electric chassis, trolley BALKANCAR T 10232 ( T10232 ) Load capacity: 500 kg Stroke: 12 m lifting speed. 8 m/min travel speed 20 m/min 220 / 380 V 3AC 50 Hz IP44 control bottle with approx. 2.0 m connection cable ! used, tested ! Dimensions: 870 x 500 x 500 mm

Electric Chassis, Rolling Chassis, Trolley HOFFMANN FÖRDERTECHNIK GmbH WURZEN LIFTKET Load capacity: 500 kg Travel speed: 5 / 20 m/min Beam width: 50 - 106 mm Bolt diameter: Ø 24 mm Motor:ABM EFB2/G71F/4KD71B4X-8/2 0.04 / 0.18 kW 222 / 1018 rpm 220 / 380 V 3AC 50 Hz IP54 see also K136 ! used, tested ! Dimensions: 670 x 230 x 170 mm

Electric chassis, rolling trolley, trolley SMALL HEISTS WURZEN Load capacity: 500 kg Travel speed: 24 m/min Driving wheel: Ø 70 mm beam width: approx. 60 - 120 mm Engine: VEM KMO 56 K 4 - 19 ( KMO56K4 -19 ) 220 / 380 V 3AC 0,1 kW 1360 rpm New ! Dimensions: 340 x 300 x 190 mm

Welding table with fume extraction ARMATURENWERK ZITTAU G-61/1 800 x 500 mm with fan Q 1600 m3/h 0,45 kW 220 / 380 V upper or/ and lower suction adjustable used, tested ! Dimensions: 870 x 900 x 1100 mm

Motor roller, drive roller, conveyor belt motor, drum motor, electric belt drum TAKRAF, CONVEYOR EQUIPMENT ASCHERSLEBEN EGT 7,5 - 500 x 950 - 1,25 TGL 24505 Drum diameter: Ø 500 mm Drum length: 950 mm Motor : 7.5 kW 220 / 380 V 3AC 50 Hz Belt speed: 1.25 m/s shaft diameter: Ø 65 mm pillow block base: 250 x 65 mm used, tested ! Dimensions: 1480 x 500 x 500 mm

Motor roller, drive roller, conveyor belt motor, drum motor, electric belt drum TAKRAF, CONVEYOR EQUIPMENT ASCHERSLEBEN EGT 5,5 - 500 x 750 - 1,31 TGL 24505 Drum diameter: Ø 500 mm Drum length: 750 mm Motor : 5.5 kW 220 / 380 V 3AC 50 Hz Tape speed: 1.31 m/s Shaft diameter: Ø 55 mm Pillow block base: 225 x 60 mm used, tested ! Dimensions: 1130 x 500 x 500 mm

Assortment Erlenmeyer flask, narrow-necked flask, 17 pieces JENAER GLAS, TGI Technical glass Ilmenau RASOTHERM 7x 500 ml Dimensions: Ø 105 x 177 9x 300 ml with stopper Dimensions: Ø 89 x 151 mm ( without stopper ) 1x 200 ml with stopper Dimensions: Ø 79 x 134 mm ( without stopper ) New ! Dimensions ( packaging ): 570 x 410 x 200 mm

Probe Extension, 2 pcs RENISHAW M-5000-7585 Overall length: 20 mm Diameter: Ø 7 mm Thread: M4 Holder Material: Stainless Steel New ! Dimensions ( Packaging ): 77 x 14 x 14 mm

Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Nominal load: 500 kg -Lifting speed: m/min -Lifting height: 3.8 m -with: service -Dimensions: 580/330/H490 mm -Weight: 100 kg

Skate Wheel Expandable Conveyor 1.120- 4.500 mm. long More then 300 machines new and second hand on our seema .de

Evaporator, 4 fans, dimensions: 2000 mm x 500 mm x 450 mm.

Kuba evaporator, 2 fans, dimensions: 2000 mm x 500 mm x 500 mm.

Evaporator, 4 fans, dimensions: 2000 mm x 500 mm x 450 mm.