ct scanner used for sale

turning diameter: max. 320 mm turning length: 450 mm control: 32 i S Fanuc centre height: 190 mm turning diameter over bed: 320 mm turning dia. over face-slide: 260 mm Main spindle:: turning speed range - main spindle: max. 5.000 min/-1 power capacity - main spindel: 11 / 7,5 kW max. Torque: 115 / 86 Nm usable bar diameter: max. ( 52 ) mm spindle bore: 68,5 mm spindle diameter in front bearing: 100 mm C-Axis: 360 x 0,01 ° axis stroke:: travel -x axis: 160 mm travel -z axis: 450 mm turret:: number of toolpositions: 12 pos. tool taper: VDI 30 Shank diameter: 20 x 20 mm Number of driven toolspositions: 6 pos. max. speed driven tool stations: 5.000 min/-1 power capacity - driven tool-stations: 3,7 kW Tailstock:: tailstock adjustment: 400 mm intake pressure max.: 4.000 N feeds:: rapid traverse: X: 20 / Z: 30 m/min Feed force ( X / Z ): 4,5 kN total power requirement: 24 kVA weight of th ...

Swing over bed/ plane: 600/ 420mm, max. turning length: 829mm, quill stroke: 120mm, weight: 9.6t, including chip conveyor, machine needs overhauling.

Software: Eltro Pilot, controls: Heidenhain Turn Plus (EP90) 1190 V4.6, spindle hours counter: 45,288h, including accessories. Pictures upon request.

Connected load: 58.5kVA, operational hours counter: 50,559h, with documentation, without tools, was maintained regularly, an inspection is possible.

General2 Axes Universal Turning Machine - tool drive - C axis - Y axis; Control: DMG MORI Slimline Multi-Touch Working areaSwing diameter over guide ways650 mmSwing diameter over transverse guideway465 mmTurning diameter315 mmBar diameter max.80 mmSlide 1Longitudinal stroke600 mmTransverse stroke267 mmY axis, vertical+/- 60 mmRapid traverse in X30 m/minRapid traverse in Z30 m/minRapid traverse in Y10 m/minMain drive 1Drive power (100% DC)17 kWDrive power (40% DC)25,5 kWSpeed range- 4000 rpmTorque (100% DC)283 NmMax. torque (40% DC)426 NmC-Axis Speed-100 rpmTorque of C-Axis (holding torque)370 NmFloor space/WeightDimensions (L x W x H)3,0 x 2,66 x 1,94 (4,18 x 2,66 x 1,94) mWeight approx.5800 KgTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)5,44 kWPre-setting Package CTX 450 ecolinePre-setting ...

System consists of four CTT 300 and three TT 100, capacity: 4x 200/ 3x 100l, connected load: 1.6kW.

Sigmatek CTO162 C-DIAS Digital Bus Module Output Module Devices were used at times under favorable conditions in a test station, hardly used, mostly for testing the software when new plants were built. Price per piece. Invoice with VAT. If there are any uncertainties with the software (e.g. in the case of monitoring the serial number by the software), we may be able to help. Feel free to call us.

Working area: 1980x3200x65mm, outfeed belt width: 3000mm, vacuum pump power: 18kW, operating system: Windows 10, software: Cuttec GNE with import and export of DXF files, optionally available is a Link Conveyor CTGF, dimensions: 6000x2000mm, controllable from the cutter and foot switch, including film unwinder with sensor control, multi layer plates, vacuum pump with integrated filter and two integrated hollow drilling devices.

Materials: Paper from 10 to 250 g/m², plastics, polypropylene, siliconized papers. Max. Width: 1200mm, max. diameter of parent roll: 1300mm, max. weight of roll: 1200kg. Min. length: 180mm, max. length: 1000mm, tolerance: +/- 0.2mm. Max. mechanical speed: 180 cuts/minute, max. stack height: 1300mm. Static current elimination system.

Sigmatek CTO163 C-DIAS Digital Bus Module Output Module Devices were used at times under favorable conditions in a test station, hardly used, mostly for testing the software when new plants were built. Price per piece. Invoice with VAT. If there are any uncertainties with the software (e.g. in the case of monitoring the serial number by the software), we may be able to help. Feel free to call us.

Reference Num.: 3992 Brand: HEIGHTS Type: Inca 70 Polymer Processor (CTP) Construction year: 2003 Available: directly Status: Not in production Location: Europa Equipment: - Maximale Plattenbreite: 811 mm (31.9?) - Minimale Plattenl?nge: 254 mm (10.0?) - Dicke der Platte: 0.15 - 0.30mm (0.006 - 0.012?)

CEPHALOPOD CUTTER WITH POSITIONING BAND, MECALSA TYPE: MC CTDP/CH200 Technical description: Material: Stainless steel Voltage: 380/440 V Frequency: 50/60 Hz Cutting pitch between blades: 40 mm

HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier  ...

Fritsch pastry line type Easyline - Built in 1999 consist of: Calibration head Cutting roller frame for 2 tools 1 piece worm roller Filling device, 4 rows - Year of construction: 2021 Guillotine various tools, folding shoes, etc. available after consultation Fritsch Croissant Plant Year of construction: 1999 composed of: Punching robot type CTR-700 Winder type CRH 400 (unfilled products)

faceplate diameter: 4500 mm swing diameter: 5000 mm turning height: 2645 mm control: Siemens 840 D cross rail adjustment - vertical: 1500 mm max. ram stroke: 2000 mm ram head dimension: 300 x 300 mm faceplate turning speed range: 0,4 - 95 U/min main drive: 2 x 80 kW faceplate load max.: 80.000 kg Equipment / Accessories: - C-axis driven tools HSK 100, 37 kW, 3000 rpm - hydrostatic guides of the linear axes - UWFK milling head 500 Nm +/- 90°, tool and workpiece measurement - tool and process monitoring ARTIS CTM system - workspace visualisation via video camera on the support - tool magazine (arranged on the floor) for turning and milling tools as well as storage for milling heads - work area protection completely closed with automatic covering of the chip chutes - coolant system with filter system, chip conveyor - various tool holders - documentation The data for this ad was created ...

Filleting machine for salmon and trout This filleting machine processes salmon, trout from abt. 2 to 7 kg up to 20 fish/min (depending on fish size). The CT2630 in many ways is similar to the CT 2611. But the main difference from the CT2611 is the combination of band knives and circular knives. Due to this combination the machine CT2630 treats the fillets very gently. The band knives automatically adjust to the size and shape of the fish and the circular knives make sure that the cut is made as close to the backbone of the fish as possible. A clean cut with maximum yield is achieved. With this filleting machine time-consuming readjustment is avoided. By simple adjustment of valve pressure, the machine automatically cuts the required type of fillet. The open design of the filleting machine makes cleaning considerably easier. At the back of the machine you will find two access doors  ...

turning diameter: 324 mm turning length: 600 mm control: SINUMERIK 840D ShopTurn bar diameter: 65 mm swing diameter: 680 mm travel -x axis: 260 mm travel -z axis: 635 mm spindle speed:: 5000 1/min spindle bore: 79 mm C-Axis: 0,025 ° turret head: 12 Pos. / VDI 40 Driven Tools: 12 Pos. 4.500 U/min rapid traverse X-axis: 60 m/min rapid traverse Z-axis: 45 m/min taper in tailstock-quill: MK 5 tailstock travel: 580 mm drive capacity - spindle motor: 25 kW voltage: 400 V total power requirement: 50 kVA weight of the machine ca.: 6,0 t dimensions of the machine ca.: 3,50 x 2,46 x 2,10 m chip conveyor: 4,00 x 1,25 x 1,50 m - Serial-No.: 02260001561 - Machine ON: 64.692 h - Programm ON: 18.296 h - control: SIEMENS 840D ShopTurn - electrical hand wheel - C-Axis / driven tools - Spindle bearings NEW - Ball screw Z-Axis incl. bearings NEW - chip conveyor - coolant equipment - machine lamp The dat ...

turning diameter: 324 mm turning length: 600 mm control: Data Pilot 4290 HEIDENHAIN swing diameter: 680 mm bar diameter: 65 mm travel -x axis: 260 mm travel -z axis: 635 mm spindle speed:: 5000 1/min spindle bore: 79 mm C-Axis: 0,025 ° turret head: 12 Pos. / VDI 40 Driven Tools: 12 Pos. 4.500 U/min rapid traverse X-axis: 60 m/min rapid traverse Z-axis: 45 m/min taper in tailstock-quill: MK 5 tailstock travel: 580 mm drive capacity - spindle motor: 25 kW voltage: 400 V total power requirement: 50 kVA weight of the machine ca.: 6,0 t dimensions of the machine ca.: 3,50 x 2,46 x 2,10 m chip conveyor: 4,00 x 1,25 x 1,50 m - Serial-No.: 02260003251 - Machine ON: 19.039 h - Programm ON: 2.676 h - control: HEIDENHAIN Data Pilot 4290 - New main spindle bearings - Z-Axis ball screw reconditioned incl. new bearings - electrical hand wheel - C-Axis / driven tools - chip conveyor - coolant equipmen ...

DMG Gildemeister CTX 320 Linear V6 CNC lathe with Y-axis, driven tools and second spindle CNC control Siemens 840D Powerline Turning diameter 240 mm Spindle bore diameter 51 mm Spindle speed 6000 rpm Spindle motor 20/16 kW X-axis travel 141 mm Y-axis travel: 32 mm Z-axis travel 450 mm W-axis travel 380 mm Minimum indexing of the main spindle of the C-axis 0.001° minimum indexing of the C-axis auxiliary spindle 0.001° Number of tools on turret 12 Number of driven tools 12 Spindle speed driven tools 5000 rpm Tool holder DIN 69880-30 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

Inv. Num. : 6768 Type: CTO 80 Producer: PIESOK Created: 1990 Parameters: Compressive force: 80 t Machine weight: 6100 kg

Tungaloy Flat Puncture Holder CTIFL 10-8T05

turning diameter: 680 mm turning length: 600 mm control: Siemens 840 D total power requirement: 11 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 4350 x 2440 x 2080 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories: for tool grinding machine -Lynets, scanners, counter bearings -Weight: 25 kg

Electronic Module, Fieldbus Node TR-ELECTRONIC @PLC-C202-EN @ctiveIO 05162 SN2564 used ! Dimensions: 135 x 90 x 35 mm

Electronic module, fieldbus node TR-ELECTRONIC @PLC-C202-EN @ctiveIO 2.2.3.02.03.2005 24 V DC 0,135 A with two connection cables New ! Dimensions: 135 x 35 x 100 mm

Electronic Module, Fieldbus Node TR-ELECTRONIC @PLC-C202-EN @ctiveIO 05171 SN2586 New ! Dimensions: 135 x 100 x 35 mm

Globe Valve Cartridge, Hydraulic Valve BUCHER EVK06/C1 CT038/03 Thread: M22 x 1.5 Solenoid: COMATROL 12 V DC 26 W New ! Dimensions: 105 x 60 x 40 mm

Gerstel / CTC Mutlti Purpose Sampler MPS complete For the LC as well as GC YOC 2014, tray for 98 vials (2ml), gas-tight injection syringes

Min/Max cutting length 230/1.000 mm. Max cutting width 1.250 mm. Max unwinder diameter 1.030 mm. n.2 unwinders available max reel weight per shaft 1.000 kg. nominal max cutting speed 130 m/min nominal max thickness 220-240 gr/sqm photocell for prints antistatic bar total dimensions LxW 2,2 x 4,8 mt. kg. 4.200, constructed in cast iron sound level under 75 Db power 16 kw Technical specs given by previous owner or constructor machine checked for good conditions, Construction year 2000, check on [this video](https://youtu.be/867xqXH-bb0), full reconditioning with addition of accessories, available on request

Make: GILDEMEISTER CTX 310 incl. bar feeder Breuning with C-axis and driven tools Manufacturer: DMG GILDEMEISTER CTX 310 Year of construction: 2010 Category: Turning Center Bar feeder: Breuning IRCO DS 4210 Control: Fanuc 0i Z-axis stroke: 160 mm X-axis stroke: 450 mm Turning diameter Max. rotatable diameter: 330 mm Max. rotatable length: 450mm ​ Speed: 5,000 rpm Torque S1: 112 Nm Tool turret: 12 positions Conveyor Cooling lubricant reservoir Pressurized coolant pump: 5 bar On request, including dismantling and loading. Machine documentation, manuals, CE conformity.

Technical data for the grating: Manafacture: Gi-Ro Vreden Condition of the goods: new (unobstructed) Reason for return: Wrong order end customer The scope of delivery includes: 01x Press grate, new (unobstructed) Material color: hot-dip galvanized Ctow7lyof8 Total depth: 1,000 mm (support rod direction) Total width: 980 mm (crossbar direction) Support rod diameter: 35/1.7 mm S355JR TS anti-slip: no QS anti-slip: no Edging: T-profile 35 mm Mesh size: 90 x 50 mm Weight: approx. 9.35 kg | Pcs. Internal designation: R

Agilent 5973N inert MSD with GC Agilent 6890 N Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently serviced/with warranty Installation on request

Year of construction: 2011 Control Siemens 840 Dsl Rotation diam. [mm] 250 Spindle: Motor spindle technology Speed 6,000 rpm Power (max.) 39 kW Torque (max.) 460 Nm Clamping cylinders Full clamping cylinders Workpiece clamping 3-jaw chuck, SMW autoblock, KNCS-NB-260-72 Tool carrier I: Technology turret with 12 stations Tool holder VDI 40 Tool drive 6,000 rpm, 7.5 kW, 24 Nm Tool carrier II: Technology:Drilling station with IK feed Tool holder Capto C8 General: Travel in X/Z 1,180/525 mm Rapid traverse in X/Z 60/30 m/min Equipment/accessories: Displacement measuring system directly in X/Z (glass scale) Chip Management Chip Conveyor Coolant management IKZ system with paper belt filter and high pressure Tool breakage monitoring ARTIS CTM Automation of circulating workpiece storage, L-type Oil mist extraction Electrostatic separator, IFS IFE2000

Key data: 500 mm, 635 mm, 5000 1/min

- Control: Heidenhain CNC Pilot 3190/4290 - Software update Turn-Plus - Turning diameter: 500 mm - Turning length: max. 635 mm - Spindle speed: 25-5000 rpm - 12-speed turret, no driven tools -Tailstock -Conveyor

Key data: 600 mm, 1000 mm

Machine Details Stock-No. 1105-03917 Type of machine CNC Lathe - Inclined Bed Type Make GILDEMEISTER Type CTX 500 Year of manufacture 1993 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis ex stock Technical details turning diameter 600 mm turning length 1000 mm control ELTROPILOT swing diameter 600 mm spindle turning speed range 16-3200 1/min 3-jaw-chuck diameter 250 mm swing diameter over face slide 420 mm turret (x-stations) 12 VDI 40 total power requirement 50 kVA main drive motor 27 kW tailstock quill taper MT 5 Spindle Bore 85 mm work piece power 9,2 kW Rapid Traverse 10/15 m/min Additional information 3 axis machine coolant tank, tailstock chipconveyor, C AXIS + 3 Live Tools with 3-jaw chuck RÖHM D 250mm, various toolholders

Key data: 390 mm, 1250 mm

Machine Details Stock-No. 1105-03915 Type of machine CNC Turning- and Milling Center Make DMG-GILDEMEISTER Type CTX beta 1250 TC Year of manufacture 2014 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time by arrangement Freight basis from location Technical details turning diameter 390 mm turning length 1250 mm control SIEMENS 840 Weight of the machine approx. 11 t Additional information

CTS Temperature Test Chamber CTS T-40/200 EX/I CTS Temperature test chamber CTS T-40/200 EX/I 200L 142137 -40 to + 180°C Heating 4 K/min Cooling 4 K/min More items - new and used - can be found in our shop! International shipping costs on request!

turning diameter: 210 mm turning length: 580 mm control: 840 D Siemens centre height: 190 mm turning diameter over bed: 330 mm turning dia. over face-slide: 260 mm Main spindle:: turning speed range - main spindle: max. 4.000 min/-1 power capacity - main spindel: 10 / 7,5 kW max. Torque: 115 / 86 Nm spindle bore: 68,5 mm max. usable bar diameter: 51 mm C - Axis: 0,001 ° axis stroke:: travel -x axis: 185 mm travel -z axis: 455 mm turret:: number of toolpositions: 12 pos. tool taper: VDI 30 Driven Tool Stations:: 6 pos. Tailstock:: tailstock adjustment: 400 mm intake pressure max.: 4.000 N feeds:: rapid traverse: X: 20 / Z: 30 m/min Feed force ( X / Y / Z ): 4,5 kN total power requirement: 21 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 8,0 x 2,2 x 2,0 m Documents: Chip conveyor: Coolantsystem: Tailstock: parts catcher: C-axis: driven tool stations: Signa ...

Gildemeister CTX Beta 500, Year of construction 2009, Control Heidenhain IT Plus, Travel X/Z 300/550 mm, Y axis +/- 60 mm, Main spindle up to 5,000 rpm, C axis, rods Ø up to 77 mm, 16-speed revolver, VDI 30, Addressed. Tools Interface Bar Feeder, programmable tailstock, Chip conveyor, three-jaw chuck Ø 250mm, 7,200 spindle hours, Accessories

tool taper: VDI 40 DIN 69880 number: 22 Stück A range of tool holders. Condition well preserved. Tool holder size: VDI 40, DIN 69880 Was used on a Gildemeister CTX 500 E CNC lathe. Quantity: 1 driven tool holders, angled design. 18 driven tool holders, straight design. 3 standard tool holders. Only sold in a package! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3200 mm, 720 mm, 600 mm

Machine Details Stock-No. 1105-03938 Type of machine Machining Center - Vertical Make HEDELIUS Type Cb 70 -3200 Year of manufacture 2000 Type of control CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details x-travel 3200 mm y-travel 720 mm Z-Travel 600 mm table-size 3500 x 750 mm turning speed range 30 - 10000 rpm Tool Magazine: 30x tool taper SK40 total power requirement 30 kW weight of the machine approx. 14 t dimensions of the machine approx. 45.15x 2.6 x 3.0 m Additional information with CNC heidenhain TNC 530 automatic toolchanger 30-pockets SA 40 fixable centre wall for double working area design ( X-Axis Two Times 1500 mm ) tool brake control Chip Conveyor Coolant Attachment CTS nice machine

? Suitable for homogenising for aqueous products. ? Viscosity 100 mPas, density 900 - 1,100 kg/m3 ? Speeds 77-769 rpm ? Power 0.05 - 0.55 kW ? 2-bladed trapezoidal agitator diam. 210 mm, shaft length 800 mm ? Parts in contact with product shaft and stirring element made of mild steel St. 37, coated Halar E-CTFE (equivalent to PTFE) ? Equipped for 300 l drum, diam. 750 mm, height 800 mm (drum not included) ? Agitator height adjustable by hand crank ? Lifting height from lower edge of agitator bottom 450 - 1,050 mm ? Agitator can be tilted by hand crank ? Drive 400V/50Hz

• Hydraulic lifter • S/S-style • Load 120 kg • Lifting height appr. 1,20 m • Drum holder Ø 400 mm • Rotatable, tiltable upwards • Length of arm 820 mm • Mobile • Protection class EEx eII CT4 • Electrical connection 400V/50Hz/0,75kW

faceplate diameter: 4500 mm swing diameter: 5000 mm turning height: 2645 mm Control: Siemens 840 D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Equipment: CNC control Siemens Sinumerik 840 D Direct measuring system C-axis with extension of the workpiece measurement Hydrostatic guidance of the linear axes Workpiece measurement Tool measurement Tool and process monitoring ARTIS CTM system Workroom surveillance with video camera (at the support) Processing heads with automatic tool clamping UWFK 500 Nm, +/- 90° manually pivotable Various tool holders, type 300.2 Tool magazine 24 to 72 Platu magazine pick-up plate Loading crane for the tool magazine, load capacity 500 kg Loading device with HSK, capto-, KM tool holder Machine protection device Automatic cover of the chip chute Working area protection completely closed Preparation for installing a ...

Position computers, position scanners -Voltage: 220 V 50 Hz -Dimensions: 310/340/H210 mm -Weight: 12 kg

Position computers, position scanners -Voltage: 220 V 50 Hz -Dimensions: 310/340/H210 mm -Weight: 12 kg

bevel gear -Speed: 50 Hz 166.9 rpm -Speed: 103 Hz 344 rpm -Type: M4B -Brake -Hollow shaft: Ø 40 mm -Protection class: IP 65 -Number: 1x available -Price per piece -Dimensions: 750/265/H220 mm -Weight: 62.4 kg

Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, drive controller -Manufacturer: Nord, NORDAC frequency converter -Type: SK500E-111-340-A -Power: 1.1 kW -Input: 3AC 380/460V 47/63Hz -Output: 3 AC 0-Input V 0-400 Hz -Control Box: SK TU3-CTR -Dimension: 270/70/H160 mm -Weight: 1.7 kg

Collet holder, tool holder, tool holder, milling holder, milling tool, cutter head holder, milling arbor, power chuck -Manufacturer: NT Tool, high-performance power chuck in original packaging -Type: SK40-CT20S-105 -Clamping Ø: 20 mm -Number: 2 pieces -Price: per piece -Dimension box: 240/100/H125 mm -Weight: 2 kg/piece

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners -EX: protected -Manufacturer: Nilfisk, ultra-compact industrial vacuum cleaner with side channel blower -Type: CTS22 H Z22 -Connection: 400 volts -Power: 2.2 kW -Number: 3 devices available -Price per piece -Dimensions: 1100/770 / H1270 mm -Weight: 127 kg / piece