cpm press used for sale

UWM PRESS BRAKE/WORKSHOP PRESS TYPE UWM 50TE -Capaciteit 50 ton -Max druk pomp 25 MPA -Werkslag 220 mm -Max hoogte 680 mm -Max Queen 790 mm -Afmeting table 400 x 800 mm -Afmetingen 1500 x 650 x 1950 mm -Weight of 980 kg -Motor 3 KW/400V DUTCHMACH Metal working machinery ENSCHEDE - NETHERLANDS (3 km from the German border)

The press is suitable for pressing meat in rectangular shapes Dimensions: 300 x 100 x 230 cm Compressed air approx. 8 bar

spare parts - dimter press cylinder for cycle press PN 25 H Press cylinder for hydraulic clock press 20 + 25 to

pressure:200 t distance between columns:1550 mm stroke:400 mm dimensions:ca. 4400 x 3250 x 4100 mm Table dimensions:1500 x 1500 mm distance table - lower edge of ram:1590 mm return capacity:20 t total power requirement:20 kW Oil Cooling:1,5 kW stroke speed:25 mm/sec down speed:10 mm/sec :250 l table plate:120 mm Table cut-out:550, 450, 350 und 200 mm table speeds:30 mm/sec

pressure:400 t distance between columns:2500 mm stroke:600 mm Table dimensions:2500 x 2000 mm distance table - lower edge of ram:600 mm total power requirement:18 kW speed of forward flow:9 mm/sec Return Speed:19 mm/sec :67 Lt./min. Total weight, approx.:26 t

Used Hydropneumatic Press / Assembly Press - Pressing force 10 KN (1 to) - Used hydropneumatic cylinder make TOX - Pneumatic two-hand control - Portal frame aluminum profile 90 90 mm - Machine table made of aluminum profiles and multiplex plate 700 700 mm - Total weight approx. 50 kg Suitable as an assembly press for insezing components. With x- and y-adjustment alignable vice for die diameters up to 80 mm. Or for small punching or embossing tools. All tools or vices are quickly changed through the groove system.

pressure capacity max.:50 t

pressure capacity max.:25 t

Pressure total: 80 ton Stroke: 110 mm Daylight: 450 mm Table surface area : 650 x 520 mm Slide area: 560 x 480 mm Die cushion capacity in table: 20 ton Required power: 18,5 kW Dimensions L x W x H: 2000 x 1200 x 3000 mm Weight of machine approx.: 4,8 ton

Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Pressure total: 700 ton Stroke: 600 mm Daylight: 1000 mm Table surface area : 3000 x 1200 mm Slide area: 3000 x 1200 mm Approach speed: 150 mm / sec Working speed: 1 - 10 mm / sec Return speed: 150 mm / sec Die weight at the ram max.: 4000 kg Required power: 65 kW Weight of machine approx.: 62 ton

Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton

Pressure total: 315 ton Stroke: 1100 mm Daylight: 2200 mm Table surface area : 2500 x 1000 mm Slide area: 2500 x 1000 mm Die weight at the ram max.: 6000 kg Approach speed: 600 mm / sec Working speed: 32 - 230 mm / sec Return speed: 600 mm / sec Required power: 158 kW Weight of machine approx.: 44 ton Height over floor approx.: 6175 mm

Pressure total: 300 ton Stroke: 700 mm Daylight: 1000 mm Table surface area : 2000 x 1000 mm Slide area: 2000 x 1000 mm Weight of machine approx.: 20 ton

Pressure total: 315 ton Stroke: 600 mm Daylight: 800 mm Table surface area : 2000 x 1200 mm Slide area: 2000 x 1200 mm Approach speed: 450 mm / sec Working speed: 14 - 40 mm / sec Return speed: 300 mm / sec Table height over floor: 900 mm Oil volume: 2000 l Required power: 75 kW Height over floor approx.: 5000 mm Dimensions L x W x H: 4900 x 3200 x 5000 mm Weight of machine approx.: 45 ton

Pressure total: 280 ton Stroke: 800 mm Daylight: 1.600 mm Table surface area : 2.000 x 1.200 mm Slide area: 2.000 x 1.200 mm Die cushion capacity in table: 65 ton Die cushion stroke: 350 mm Die cushion pad area: 1.705 x 920 mm Approach speed: 15 m / min Working speed: 0,8 - 2,4 m / min Return speed: 8,5 m / min Required power: 2 x 37 kW Height over floor approx.: 4.850 mm Weight of machine approx.: 26 ton

Pneumatic press, air press BOSCH Type 0840 002 002 Fabr. No. 041 Year of construction 1980 Compressive force 18 KN = 1.8 ton. at 5 bar 15 kN = 1.5 ton. at 4 bar 12 kN = 1.2 ton. at 3 bar 8 kN = 0.8 ton. at 2 bar 6 kN = 0.6 ton. at 1.8 bar outreach 100 mm ram stroke 70 mm Table surface 245 x 200 Ram surface 45 mm Installation height max. 235 mm Clamping pin bore 20 mm with clamping screw Compressed air requirement 5 bar - Pressing force infinitely adjustable via pressure regulator- Pneumatic cylinder with plunger height adjustable by 90 mm- pneumatic 2-hand operation - mounted on metal base with wooden plates Space requirement L x W x H 1050 x 700 x 1600 mm Weight pneumatic press 82 kg Weight with table base 140 kg good condition; used

Pressure regulating valve with pressure switch, pressure regulator, FESTO LR-D-7-I-MINI 192307 Operating pressure: 1 - 16 bar Pressure control range: 0,5 - 7 bar Pressure switch: JOUCOMATIC 34900018 Operating pressure: 0.5 - 10 bar Switching capacity: max. 250 V AC/DC approx. 1.5 m Connection cable spare part for HECKERT CWK400 D machining centre, among others ! used, tested ! Dimensions: 180 x 100 x 95 mm

Acetylene pressure reducer pressure regulator MESSER GRIESHEIM / WITT U13 / 06D-57 357DH P1: 25 bar / P2: 1,5 bar SV 73.97 P: 1,9 bar FN 12-021 001 Pmax: 1,5 bar HDS17/017 Pmax: 25 bar used, tested ! Dimensions: 380 x 550 x 170 mm,

Pressure transmitters, transmitters, pressure transmitters, with diaphragm diaphragm seals JUMO dTRANS p30 Type 404366/000 TN 00587682 Measuring range: -1 - 5 bar U (supply): 10 - 30 V DC output: 4 - 20 mA diaphragm seal: EMPEO type 7510 flange according to DIN EN 1092-1 B1 / DN40, PN10 / 40 Flange diameter: Ø 88 / 150 mm bolt circle diameter: Ø 110 mm, hole diameter: Ø 17.5 mm Material: stainless steel ( 1.4435 / 316L ) New ! Dimensions ( pressure transmitter ): 145 x 60 x 50 mm

Frame press, gluing press -operated: hydraulic -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100 / H3700 mm -Transport dimensions: 4200/1200 / H2300 mm -Weight: approx. 3500 kg

Pressure differential pressure switch -Type: QBM81.B -for flow and filter monitoring in air ducts -Setting range: 50...500 Pa Technical specifications: -Switching difference: adjustable -Output: EPU 250 V, 1(0.5) A -Weight 0.2 kg

KSB VF35-5 Movitec high-pressure inline pump 11 kW Manufacturer: KSB Type: Movitec VF32 5 ID No.: 47110112 Maximum flow rate: 27 m³/h Maximum flow rate: 2850 l/min Mains voltage: 3~400/690 V Degree of protection: IP55 Power: 11 kW 21.8 A You can find more centrifugal pumps - new and used - in our shop! International shipping costs on request!

Pressure total: 160 ton Stroke: 500 mm Daylight: 710 mm Free frontal opening L-R: 820 mm Free lateral opening F-B: 320 mm Table surface area : 800 x 630 mm Slide area: 800 x 630 mm Table height over floor: 800 mm Die cushion capacity in table: 63 ton Die cushion stroke: 200 mm Die cushion pad area: 630 x 450 mm Approach speed: 400 mm / sec Working speed: 17 - 45 mm / sec Return speed: 230 mm / sec Required power: 30 kW Weight of machine approx.: 13,6 ton

Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7

General SKUR0068 LocationBarneveld MakeDewaco Ltd (FI) TypeFPD-16 Belt Filter Press No.01-965 Year of construction2010 Main Features MaterialStainless steel Motor0.75 KW Width1600 mm Specified Features - Sieve belt press Motor0,75 kW 220-240/380-420 Volt and 0,37kW 220-240/380-420 Volt Band speedvariabel Belt width1600mm With fluid reservoircheck MaterialStainless steel Information With switchon the gearbox Weight3400 KG CEcheck Floorspace3,5x2,4 M Total height2,6 MSieve belt pressesDEWAFilters > Sieve belt pressesBrand > DEWA What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU300U589 LocationBarneveld MakeKorsch TypeEK 0 No.K0000094 Year of construction2001 Main Features Tablet Diameter20 mm Specified Features - Single stroke tablet press MaterialStainless steel 1.4301 (304), Stainless steel 1.4435 (316L), Tool steel 1.2721 Single stroke tablet presscheck Tablet diametermax. 20 mm Filling depth0-20 mm Die diameter20 mm With filling shoecheck With hoppercheck Capacitymax. 3600 st. With motor0,55 kW, 220/380Volt With variable speed drive10-60 rpm Information Mounted on frameStainless steel cabinet With switchcheck With switchgearcheck Weight180 kg CEcheck Floorspace0,74x0,46 m Total height1,90m Extra Specifications- with various press tooling - compression force indication Single stroke tablet pressesGeneric medicinesKorsch PressenPresses > Single stroke tablet pressesIndustries > Pharmaceutical > Generic medicinesBrand > ...

General SKU300U588 LocationBarneveld MakeKorsch TypeXL 100-8-EUD No.K1510018 Year of construction2001 Main Features Tablet Diameter25 mm Material Specified Features - Rotating tablet press Rotating tablet presscheck Number of stations:1 With punching dies8-10-12 With key on punching diescheck Tablet sizes13-16-25 mm Filling depth0-6/6 mm: 4-10/10 mm: 10-16/16 mm With motorcheck (2,2kW, 220-240/380-415 Volt, 1400 rpm) With frequency controllercheck (20-120, 20-120, 20-60 rpm) Capacity29.000-72.000-86.400 pc/h With hoppercheck Information Mounted on framecheck With switchcheck With switchgearcheck Weight960 kg CEcheck Floorspace1,6x0,7 m Total height2 mRotating tablet pressesKorsch PressenPresses > Rotating tablet pressesBrand > Korsch Pressen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for s ...

Hydropneumatic operation Profile height: 150 mm Max. hole height: 120 mm Resistor stroke: 100 mm Punching stroke: 18 mm Press force: 28 kN at 8 bar Max. profile height: 100 mm Weight: approx. 250 kg

BTS-Bag Press With the BTS-Bag Press for waste bags large bulky rubbish but also cardboard and recyclable materials is compacted easy and safe to a minimum of its size. This gives users the advantage of reducing the waste volume up to 90%, waste disposal costs are reduced sustainably and a safe and clean working environment is also created. - Compaction up to 90% - Reduces frequency of waste collection - Useable for wet and dry waste - Optimum utilization of waste container - Reduces the number of waste containers - Maximum safety standards - CE-certified - Quality product Made in Europe Pressing force: 3 Ton Motor: 1.5 kW 13 Amp Power supply: 220-240 V (1 Phase) Machine size (H x W x ): 1861 x 1200 x 630 mm Transportation height: 1861 mm Machine weight: 325 kg Cycle time: 20 seconds Noise level: 68 dB Compaction up to: 90%

VERTICAL PRESSURE: 2 x 315 T, HORIZONTAL PRESSURE: 2 x 200 T, VERTICAL STROKE - UPPER PISTON: 200 MM - BOTTOM PISTON: 150 MM, HORIZONTAL STROKE: 200 MM, OPERATION PRESSURE: 280 BAR,

Ironing Pressing Line composed by In feeding Belt System Hot Press Cold Press Out Feeding Belt System

Schubert Press The platen size is 1390 mm (52”) x 2490 mm (98”) Electric heaters Make - Schubert Daylight – 305mm Floor standing Total number of rams: 16 Ram diameter: 2 ¾” Working pressure 3500 PSI The overall dimensions are length 3850mm x width 1500mm x height 2200mm Operational The condition of the hydraulics and pump unit along with ram seals is good Spare seals maybe possible (video link available on request)

To the fully automatic Assembly of frame parts. Frame dimensions: min. 120 x 120 mm Max 700 x 2,500 mm

Herman Schwabe Die Cutting Shaping Press Mechanical Press Model DG-HD Platen size 770mm x 1000mm Die cut shapes Manual cut / load pressure 4" stroke, 7" bore, 10 H.P. Motor, 415 volts 50 cycles 3 phase 14.84 full load current Made in Brooklyn, New York Serial number 50367 Complete with starter Overall dimensions 1.2m x 1.5m high x 3.3m long

Hydraulic glue press with heating base, infinitely variable temperature setting, stuffenlose setting of the adhesive holding time, Power: 5 kW, 380 v 50 Hz; Two-hand operation.

Qty. 1 Second-hand extrusion press Mfc.: Kobe Steel Built: 1985 Force: 1500 MT Type: Horizontal 4 cylinders, indirect press, independent Control Billet dimensions: dia. 175 mm x 400 – 800 mm Length Application: Extruded?Copper?Alloys

Weingarten Excenter Press

Veneer Press Dryer Manufactured by BABCOCK Model: BDI420/12 Working Width: 4200 mm N. of Heated Sections: 6

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of the force adjustment: . . . . . . . . . . . . . . . . . Maximum opening speed: 50mm/s Approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing f ...

ZM press Max ram adjustment: 400 mm Passage between uprights: 800 mm Max distance between table - ram: 500 mm

PressOne P1S-8 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-8 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 80 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Progra ...

PressOne P1S-10 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-10 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 100 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 120 mm / s Pressing speed: max 10 mm / s Extension: 620 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - P ...

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of force adjustment: ± 1% Maximum opening/approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing force - Programmable lifting opening - Program ...

pressure:60 t passage width:800 x 700 mm stroke:200 mm total power requirement:11 kW control:Automatik über Zweihandbedienung :2 / Durchmesser 40 x 25 mm Stück :28,5 Lt./min. :700 mm :800 mm pre-running speed:121 mm/sec :13 mm/sec return speed:160 mm/sec :0 bis 60 sec :2 bis 121 mm/sec. :max. 9,5 mm/sec Capacity:20T Leistung 200 mm feed down:70 mm/sec

pressure:15 t stroke:160 mm weight of the machine ca.:330 kg Oil tank capacity:10 l

was used to fill sugar cane molasses into containers open lubrication Dimensions 700 x 500 x 1200 mm

Strength: 100T Folding length: 3000mm CNC: DELEM Working speed: 10mm/s State: good, fully working Status: visible

HL 450 ton 4 column press