corner cutting used for sale

- Kantenstärke min.- max. 2 - 3 mm - Werkstückdicke min.- max. 10-50 mm - Motordrehzahl 32.000 U/min - Motorleistung 0,65 Kw - Elektrik 230 V / 50 Hz - Betriebsdruck 6 bar - pneumatischer Werkstückspanner - Spannzangenaufnahme 6 mm - Abmessungen L=800, B=650, H=450 mm - Gewicht 40 kg Inklusive: - HM Radius Fräser R 2 mm - HM Radius Fräser R 3 mm

- Kantenstärke min.- max. 0,4 - 3 mm - Werkstückdicke min.- max. 5 -50 mm - Motordrehzahl 31.000 U/min - Motorleistung 0,75 Kw - Elektrik 230 V / 50 Hz - Betriebsdruck 6 bar - pneumatischer Werkstückspanner - Spannzangenaufnahme 6 mm - inklusive HM-Radiusfräser - inklusive Polieraggregat - Abmessungen L=1050, B=730, H=1380 mm - Gewicht 350 kg

Traenklein; good condition; cleaned and checked; Table-to-table; Knife 9mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Traenklein BRM; good ZUustand; cleaned and checked; Working width 500mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Electric corner round thruster Gämmerler 105 M; good condition; Knife 52mm; Max. Insertion height 80mm; Table enlargement to 80x60cm; can be removed; optional knife 3mm available. Corner rounding machine Gämmerler 105 M; good condition; knife 52mm; max pile hight 80mm; bigger table with size 80x60cm; can also be used without the bigger table; for option is knife with 3mm.

Corner round thruster Foellmer HE/F 31; good condition; cleaned and tested; Table equipment; Knife with radius 7mm. Corner rounding machine Foellmer HE/F31; good condition; cleaned and checked; table top machine; knife 7mm.

Notching machine make COMACA type N 225 EPAS 4Machine -No: 2612Technical specifications:Knife length 225 mmMax. Sheet metal thickness 42 kg, strength 4.0 mmMax. Sheet thickness 70 kg / VA 3.0 mmfixed cutting angle 90 °Projection 110 mmStrokes per minute 45Cutting capacity 10 tTable size 1050 x 800 mmDrive power 4.0 PSWeight approx. 700 kgWith- inner depth stop- foot switch- 2 adjustable angle stops- without pneumatic automatic stopused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic fixed angle notching machine make KNUTH type KKM 250.6Machine -No: 124780 built in 2002Technical specifications:max.sheet thickness at 45 kg: 6.0 mmCutting length: 250 mmCutting angle: 90 degreesStrokes per minute: 50Table size: 810 x 750 mmHydraulic oil tank: 40 lDrive power: 4.0 kWExternal dimensions approx .: 900 x 900 x 1150 mmWeight approx: 856 kgWith- foot switch- 2 adjustable angle lengthsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Technical data:1 notching tool for presses External dimensions: 345 x 345 x 210 mm With- - Clamping T-slots lengthways and crossways used, in good condition: EUR 550, ------------------------------1 notching tool for presses External dimensions: 250 x 350 x 260 mm used, in good condition: EUR 350, -----------------------------1 notching tool for presses External dimensions: 345 x 345 x 220 mm With- - Clamping T-slots lengthways and crossways used, in good condition: EUR 520, ----------------------------1 notching tool for presses External dimensions: 345 x 345 x 325 mm With- - Clamping T-slots lengthways and crossways used, in good condition: EUR 410, -For drawing see documentsPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are a ...

Hydraulic notching machine make INDUMASCH type FA 250/6Year of construction 1995Technical specifications:fixed cutting head:90°Blade length: 250mmCutting capacity mild steel: 250 x 250 x 6.0 mmCutting capacity stainless steel: 250 x 250 x 4.0 mmTable dimensions approx.: 1000 x 790 mmMain Voltage: 380V 50HzDrive power: 3.0 kWApprox. weight: 810 kgDimensions approx.: 1000 x 1200 x 1250 mmwith- Electrical stroke adjustment with digital display- Inside stop- foot switch- automatic cutting gap adjustmentused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

We offer: 12 x Doka Framax 330 inner corner, overhauled, covered with new Finply formlining! Original value 1704,00€ with 65% discount á 596,40€/ piece + VAT. The elements are controlled and sorted. Suitable for higher-value applications SB3 Top condition! Offer only valid while stocks last, subject to prior sale! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register Court Ulm: HRA722943 VAT ID NUMBER: DE279047055

- technically efficient, ready to work - chiselling up + down - place for the milling head

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 0 nein boring of olive 1=yes, 0=no: 1 ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 boring of olive 1=yes, 0=no: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Corner tubular sieve made of stainless steel

height of profile: 60 mm : 60 weight of the machine ca.: 188 kg dimensions of the machine ca.: 0,85 x 0,45 x 1,25 m foot switch: - Fabr.-No.: 292539 - pneumatic clamping head The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Corner cleaning machine - ELUMATEC Very good Year: 2003

Sheet thickness: 4,00 mm Knife length: 200 mm MACH-id     5172 MAKE          EUROMAC Italia TYPE           200 / 4 YOP             1998 SPECIFICATIONS Control        Connventionel        Guillotine / Lazer / Cutting table     Notching machine Cutting lenght     200 mm Maximum sheet thickness      4 mm Throat         200 mm DIMENSIONS Length      780 mm Width        900 mm Height       1200 mm  

Sheet thickness: 6,00 mm Knife length: 220 mm MACH-id   5007 MAKE        Boschert Germany TYPE          K 30 - 120 E 200 YOP            1990 SPECIFICATIONS Guillotine / Lazer / Cutting table    Corner Notcher Cutting lenght       220 mm Maximum sheet thickness       6 mm DIMENSIONS Length        1550 mm Width         1200 mm Height        1350 mm

Sheet thickness: 6,00 mm Knife length: 225 mm MACH-id     5004 MAKE          Simasv Italia TYPE             AV 220 YOP               1995S PECIFICATIONS Guillotine / Lazer / Cutting table     Corner Notcher Cutting lenght         225 x 225 mm Maximum sheet thickness     6 mm DIMENSIONS Length        980 mm Width          1100 mm Height          1200 mm

Sheet thickness: 3,00 mm Knife length: 0 mm MACH-id      4305 MAKE          DMF Holland TYPE            3 U 250 YEAR           1988 SPECIFICATIONS Guillotine / Lazer / Cutting table        Corner notcher Cutting lenght         250 x 250 mm Maximum sheet thickness        3 mm DIMENSIONS Length        1200 mm Width          1200 mm Height         1200 mm

Sheet thickness: 6,00 mm Knife length: 200 mm Make Amada VERSA 204 Type VERSA 204 Year 1996 UNUSED Vario angle 135 Gr Sheet thickness (mm) L = 200 x 200 Sheet width (mm) T = 4 / 6 mm Depth rear gauge (mm) Table 1000 x 800 Never used !  

Sheet thickness: 6,00 mm Knife length: 200 mm Make FIM Versa 206 Type Versa 206 Year 1998 Capacity 200 x 200 x 6 mm Sheet thickness (mm)Angle - 30 - 120 Gr Sheet width (mm)Table 1200x 800 Depth rear gauge (mm) Digital read out Vario angle Table stop with dro Fully hydraulic  

Sheet thickness: 4,00 mm Knife length: 150 mm Make Boschert 4 mm Type Mini S Year 1991 Corner notcher 4 mm Boschert uithoeker aus klink Sheet thickness (mm)Cap 150 x 150 Sheet width (mm)Up to 4 mm ! Depth rear gauge (mm)30 - 120 Angle TOP, TOP

Capacity: 150 x 150 x 1.5mm

Corner connection press make ELUMATEC type EP 120Serial -No: 22679 Year of manufacture 12/1999Technical specifications:Press force: 4.0 tPress height: 68 mmCompressed air connection: 7.0 barAir consumption per work cycle: 30 lDrive:pneumaticApprox. weight: 204 kgDimensions approx.: 700 x 850 x 1250 mmwith- foot switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Corner notching machine make BOSCHERT type K 30 - 120 MINI S DIG.Machine -No: 398, year of construction 1993Cutting performance at St 40: 4.0 mmCutting performance at VA: 3.0 mmCutting length: 150 x 150 mmAngle adjustment: 30 - 120 °Table height: 900 mmConnected load: 4.5 kVADimensions L x W x H: 1250 x 800 x 1160 mmWeight approx: 850 kgWith- Adjustable digital display for both notching sidesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneum. Corner notching machine make EDEL type EP 950Fabr. -No: 24958377, year of construction 1983Cutting length: 200 x 200 mmCutting angle: 90 °Max. Sheet thickness: 4 mmAir consumption per stroke: 70 lWeight: 330 kgExternal dimensions: 800 x 700 x 1500 mmWith- Lutwartungseinheitused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

SKOMAB hydraulic notching machineTechnical specifications:Table size: 760 x 600 mmExternal dimensions L x W x H: 1000 x 700 x 1300 mmWeight approx: 400 kgWith- several notching toolsusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

The scope of delivery includes: 01x U-collision protection corner, used Material color: red Total height: approx. 400 mm Total width: approx. 148 mm Internal width: approx. 138 mm Total depth: approx. 350 mm Internal depth: approx. 225 mm Material thickness: approx. 5.00 mm Borehole diameter: approx. 13/ 15 mm Number/ boreholes: 05 pcs.

Corner circular shaping machine Foellmer M; good condition; cleaned and tested; knives for straight corner section; .max. Insert height 65mm; Corner section max.70mm; Foot switch. Corner cutter Foellmer M; good condition; cleaned and checked; knife for straight cut; max.pile hight 65mm; corner cut max.70mm; Foot switch.

SECOND-HAND MILLING MACHINE FOR CORNER SEATS COMEC MOD. FAS2 - S/N 951106 -Volt. 380/50

Sheet thickness: 6,0 mm Knife length: 225 mm Vario cutting Angle 30 - 140 Gr Strokes´s 55 Min Automnatic adjustemt blade clearance 0,5-6mm Brass millimetric rules Extension sheet stop rods Max. cutting length:           225mm Maximum sheet thickness:       6mm Cutting angle fixed or variabel:30 - 140 Length:                        950mm Width:                         1000mm Height:                        1150mm Weight:                        1200kg  

Sheet thickness: 6,00 mm Knife length: 220 mm Notching machineEUROMAC - Multi 220/6 V/A  Max. cutting length:           220mm Maximum sheet thickness:       6mm Cutting angle fixed or variabel:30- 120 Number of down holders:        2 Length:                        1080mm Width:                         950mm Height:                        1200mm Weight:                        1050kg

Horizontal Käde packaging machine

Amada Versa 200 x 6 mm (variable) Capacity : 200 x 6 mm Fixed angle -- variable angle: (variabel) 90°-0°-90° Workspace: 1000 x 970 mm Electric motor (power): 4 HP Length : 1000 mm Depht : 1800 mm Height: 1550 mm Weight: 1,4 ton

Amada Versa 200 x 6 mm (variable) Capacity : 200 x 6 mm Fixed angle -- variable angle: (variabel) 90°-0°-90° Workspace: 1000 x 970 mm Electric motor (power): 4 HP Length : 1000 mm Depht : 1800 mm Height: 1550 mm Weight: 1,4 ton

30° gt; 120° cap steel: 6 mm cap stainless steel: 4 mm Capacity : 200 x 200 x 6 mm Fixed angle -- variable angle: variable (30° > 120°) Workspace: 710 x 570 mm Length : 1400 mm Depht : 800 mm Height: 1100 mm Weight: 1550 kg

Sheet thickness: 6,00 mm Knife length: 200 mm Notching machineBOSCHERT - K30-120 MACH-ID 7610 Make: BOSCHERT Type: K30-120 Year: 2002 Max. cutting length:           200mm Maximum sheet thickness:       6mm Cutting angle fixed or variabel:Variable Number of down holders:        4 Length:                        1500mm Width:                         1200mm Height:                        1300mm Weight:                        1600kg

- technically efficient, ready to work - after full service - profile supports - lowered thrust unit

The scope of delivery includes: 01x U-collision protection corner, new (second choice) Manafacture: Mecalux Material color: orange (yellow / black glued) total height: approx. 400 mm overall width: approx. 245 mm Inner width: approx. 123 mm Total depth: approx. 300 mm Inner depth: approx. 100 mm Drill holeØ: approx. 16 mm Number of boreholes: 04 pcs. The U-impact protection corners are suitable for a frame profile width of 80 mm with a base plate of W 135, D 115 mm, total height: 55 mm

The scope of delivery includes: 01x Stage support, new Manufacturer: SSI Schaefer Design: Corner connection / 90° suitable for CS Sigma profiles with a profile height of 300 mm Type of screw connection: internal Material color: sendzimir galvanized Technical data for the stage carrier: Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm

Corner pipe wrenches set VBW 1 1/2 and 1 No. 951 and No. 115 DIN 5234 chrome vanadium steel New ! Dimensions: 440 x 80 x 25 mm

Corner connection press PRESSTA EISELE PV 8 Working height: 930 mm Pressing force: 30 kN Punching height: max. 90 mm resistance stroke. 100 mm punching stroke: 20 mm profile height: 100 mm compressed air supply: 6 - 8 bar with accessories ! used, tested ! Dimensions ( ready for use ): 2400 x 1500 x 1200 mm Dimensions ( transport ): 1200 x 800 x 1400 mm

Corner protection profile, corner protection profile, corner protection SHG Knuffi Type A Diameter: Ø 38 mm Angle cutout: 20 x 20 mm Length: 4x 1,0 m, 1x 0.65 m, 1x 0.1 m Colour: yellow/black Mounting type: self-adhesive Material: polyurethane New ! Dimensions ( packaging ): 1000 x 100 x 100 mm

Year: 2004 - technically efficient, ready to work - after full service - contour milling machine (rounded corners)

Corner cutter, insert cutter SECO R30.001503 00048811 Diameter: Ø 195 mm 3 Cutting edges with one holder each for inserts Insert holder: CSKPR 12 CA 12 Bore: Ø 100 mm Flange (rear): Ø 160 mm bolt circle: Ø 128 mm Material Base body: Aluminium New ! Dimensions: 195 x 195 x 122 mm

Corner milling cutters, end mills JONGEN WERKZEUGTECHNIK 90PP-28-10-4 Diameter: 28 mm Number of cutting edges: 4 Shaft diameter: 25 mm Length: 100 mm Usable depth: 51 mm Plate seat: B3 New ! Dimensions ( cutter ): Ø 28 x 100 mm Dimensions ( transport box ): 115 x 38 x 34 mm

Corner cutter, face cutter, slip-on cutter, milling head, INGERSOLL 2J1C040R00 3023203 diameter: 40 mm Number of cutting edges: 4 height: 40 mm diameter (bore): 22 mm New Dimensions ( cutter ): Ø 40 x 40 mm Dimensions ( transport box ): 62 x 56 x 53 mm