similar results found in category other metal working machines
Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear-comes from an Alberti drilling rig-max.: 18x drill-Admission:-alternately turning right/left-Distance drill: 50 mm-Distance drill: 25 mm-Number: 2x drilling heads available (1x left/1x right)-Price: per piece-Dimensions: 1090/380/H580 mm-Weight: 210 kg/piece
Column Drilling Machine ALZMETALL AB3 ESB Spindle: CM3 Rotation: 1 range 220 -800 RPM + 1 range 800-2900 RPM Table size: Length 615 mm x Width 470 mm Spindle travel: 160 mm Throat depth: 280 mm Speed adjustment by belt drive Rotative table at 360° Automatic Descent 3 speeds: 0,006 - 0,12 - 0,18 mm/min. Lubricant pump Voltage: 380 V Width: 800 mm Depth: 1300 mm Total height: 1900 mm Weight: approx 800 kg
Column Drilling Machine ALZMETALL NOLL Spindle: CM3 Spindle exit: 160 mm Table size: 500 x 400 mm Maxi distance spindle nose/table: 600 mm Throat depth: 290 mm Splindle speed by belt variator Spindle motor: 1,3 kW Manual descent 2 speed ranges Superior protection cover is missing Voltage: 380 V Width: 700 mm Depth: 900 mm Total height: 1900 mm Weight: approx 600 kg
ATLAS Copco; TEX 33F; large heavy compressed air hammer for road construction. Possibly many drilling chisels also
Bickenbach Electronic P40 STG-PV/R2 Drilling machine The machine is in top condition and can start working again immediately. Stand drill / Pillar drill: Comes with connection cable (1.5 m) and CEE plug. Drilling depth adjustment with fine adjustment for precise work and table height adjustment via rack. Fully electronic & infinitely variable feed including spindle monitoring. Spindle speeds infinitely adjustable with additional gear: 100-2000 1 / min. The stepless feed including electromagnetic clutch with setting options from 0–300 mm / min. Threading device: threading capacity max. M30. The depth of the thread is set using the depth display. Fully digital displays: speed display, drilling depth display, feed display. The drilling depth switch-off is programmable and easy to use. The boring cross has a push button for switching the machine on and off. – including coolant ...
Control Fanuc ... 31i - B Spindle diameter ... 110mm Axis X ... 2200mm Axis Y ... 1600mm Spindle speed ... 35-3000 rpm IKZ... 20bar Axis W ... 550mm Axis Z ... 1600mm Magazine slots ... 60 BT 50 Table dimensions... 1250x1500mm table load ... 5000kg Axis B ... 0,001° Rapid traverse... 12m/min L x W x H ... 7750x4715x3700mm Machine weight ... 22500kg Operating hours - 500 Head Workpiece probe Renishaw RMP 60 Conveyor Tools The machine is in good condition, possible to test under electricity.
Workbench drilling machine height capacity CINCINNATI type P310 Rotation from 400 to 20000 RPM Maxi height base/Chuck nose 200 mm Throat depth 120 mm Maxi drilling capacity: 5 mm Voltage 380 V Base dimensions: 200 x 530 mm Width 350 mm Depth 600 mm Total height 600 mm Weight approx. 50 kg MACHINE IN OUR STOCK IN FRANCE.
Item condition: New. Machine is delivered pre-assembled and tested. Specifications / Technical Data S-720 CNC-Fraesmaschine Engravings of all kinds, even on glass, VHM, carbide and up to 62 RC hard steel ! With the High-Z CNC-Fraes.- and Engraving Machine they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are protected with ...
Specifications / Technical Data S-720 CNC-Router / CNC-Engraver / Milling machine With the High-Z cnc router and engraving machine you purchase an allround talent. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc milling machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc routers / milling machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc milling machines are equipped with an emergency stop button. An additional emergency stop you find in fron ...
CNC portal fraese and 3D engraving machine T-Rex 0712: equipment / product data of cnc-Fraesen Type High-Z/TRex series: Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all Y axes from HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand make! Rapid speed max. approx. 17,000 mm/min working speed max. approx. 12,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area of the groove plate / T-slot table: 1650 x 880 mm travel distances: X=1200mm; Y=700mm; Z= 130 mm contactcontact sensors / reference switches / limit switches on all axes Double secured emergency release energy chains for clean cable handling t ...
CNC Router and 3D engraving machine T-Rex 0712: Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 17.000 mm/min Operating speed max. ca. 12.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table1650 x 880 mm Travels: X=1200mm; Y=700mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions with engines ...
Horizontal milling centre COMAU 1GXL TWIN was manufactured in 2001 by Italian company Comau S.p.A. The purpose of the milling centre is the machining of the bottom head of cylinders. The milling machine consists of two modules mounted opposite each other, equipped with a rotary table and a movable head. The rotary table of the milling machine is mounted at the front of each module and has a device for clamping the workpiece during machining. The movable head, which mills, drills holes or smoothes the workpiece, is mounted on the casing. The electro-spindle with HSK 63 tool taper of the machining centre is fixed to a headstock which slides vertically along the column casing to create the Y axis. The spindle, rotating at 16000 rpm, is equipped with a tool unlocking/locking system. The COMAU 1GXL TWIN rotary magazine holds 23 tools, with a maximum weight of 4 kg, length 270 mm and dia ...
Tool holder: MK 4 Speed range: (12) 38-1450 rpm Spindle stroke: 160 mm Feeds: 0.1 / 0.15 / 0.2 / 0.25 / 0.3 / 0.35 mm / U Table size: 500 x 500 mm Projection: 350 mm Motor power: 1.8 / 2.0 / 2.6 kW Connection: 400 V / 16 A Weight: 420 kg Dimensions (LxWxH), approx.: 790 x 600x 2100 mm Equipment: - Feed device - Thread cutting device - Drilling depth stop - Drill chuck - Pinole restocked - Service incl. oil change
HEAVY DUTY RADIAL DRILL Make : CSEPEL Model : RFM 51 Hydraulic clamps X axis : 4000 mm Arm travel : 3100 mm Radius: 2460 mm Distance basement – spindle : 1660 mm Drilling capacity in steel : 100 mm Drilling capacity in cast iron : 120 mm Weight : 20/21 ton
Turning diameter: 0 mmTurning length: 0 mmTurret positions: 0Positions ATC: 0 Number controlled axis: 0 CNC Brand: 0CNC Model: 0 Control: FANUC Series 18i-TBTechnical dataNumber of axis total: 3 Number of spindles: 1 Number of revolvers: 1 Swing in gap: 330 mmSwing diameter over bed: 510 mmMax. turning diameter: 350 mmMaximum turning length: 400 mmTurret carriage:Longitudinal travel (Z-axis): 440 mmTransversal strocke (X axis): 242 mmRapid traverse Z: 25 m/minRapid traverse X: 20 m/minTurret slide:Number of positions: 12 Tool shank cross section: 25 mmMain spindle:Inner taper type: A2-6 Collet bore: 62 mmSpindle speeds:steplessfrom: 50 rpmup to: 5000 rpmTailstock:Morse taper: 4 MTSpindle stroke: 80 mmSpindle diameter: 75 mmSpindle motor: 11/15 kWVoltage 50 Hz 3x: 400 VoltTotal power required: 35 kVAMachine´s weight about: 3940 kgOverall dimensions machine:Length: 2 ...
Prismatic column drill. Drilling capacity: 30mm. Table: 600x600mm. Speeds: 8. (75-2100) Motor power: 1,65Kw. CE. Year: 2005
X 4000 Y 2500 Z 1500 W 800 Spindle diameter 130 mm kwW/Nm (S1) 4pinacles 2099 3000 U/Min. Table size 2000 x 2400 mm, maximum table load 20 t T-grooves 22H8 HH 640 HR 510 Movable cabin Z800 Y1800 Spindle support 250 mm ISO 50 Immediately available!
Table drilling rig WHN 13 P CNC Manufacturer: Fermat Pressl overhauled: 2021 Controlling Heidenhain ... TNC 640 Spindle diameter ... 130mm Axis X ... 3500mm Axis Y ... 2000mm Spindle speed ... 10-3000 rpm ICZ ... 20bar Axle W ... 730mm Axis Z ... 1250mm ISO 50 Clamping table surface... 1800 x 1600mm Max Workpiece Weight... 12000kg Main motor power ... 41kW L x W x H ... 7200 x 7600 x 4900mm Machine Weight... 35000kg Total power requirement ... 80kVA The machine is after a complete overhaul and can be tested under power.
Workbench drilling machine FLOTT TB 6/I, II, III One-piece spindle - male cone B12 Manual spindle exit: 65 mm Speed: from 450 to 9000 RPM Throat depth: 160 mm Mini height in low position: 60 mm Max height in height position: 180 mm Head rotation around the column Voltage: 380 V Width: 300 mm Depth: 600 mm Total height: 700 mm Weight: approx 70 kg
Specifications: - Tapping performance approx. M 2 - M 14 - Working range ( swivel radius ) approx. 915 mm - Multi-position head - Speeds up to approx. 350 rpm - Tool quick change holder size 2 diameter 31 - Pneumatic connection 6 - 8 bar - Air consumption approx. 480 l/min - Space requirement approx. W 1000 x H 660 x D 200 mm - Weight approx. 50 kg
Qty. 1 Second-hand bifilar pipe winding line Mfc.: GRAEWE GmbH Type: AEW 1000 Built: 1998 Tube dia.: 10, 12, 14 & 16 mm Coil core ID: 940 mm OD: 1250 mm Bifilar coiler Type: EW 1000 PLC Simatic S5 Consist of: De-coiler Coiler Ring coiler Bending unit Support table Cutting shear Binding device Electrical Control
Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multiple-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear, drilling head-Manufacturer: Grotefeld, multi-spindle head max 3 drills-Admission: M8-Spindle drive: dimensions see photo techn. drawing-Spindles: 2x clockwise / 1x counterclockwise rotating-Distance drill: see photo-Dimensions: 132/85 / H82 mm-Weight: 3.1 kg
Radial drilling machine. Drlling capacity: 80mm. Arm of 1700mm. Mobile table.
Radial Drilling GSP type 44 T 12 Spindle: CM4 Spindle exit: 300 mm Arm travel: 1000 mm Max height swivel table/spindle nose in height position: 600 mm Max height table/spindle nose in height position: 1100 mm Swivel table +/- 90° Swivel table dimensions: 1000 x 400 mm Spindle motor: 5 CV Auto descent Mechanical locking Lubricant pump Spindle rotation left/right Rotation at 360° around the column Voltage: 380 V Length: 2100 mm Width: 1000 mm Total height in height position: 2400 mm Total height in low position: 2400 mm Weight: approx 2,5 T
Gölz Drill Rig KB300. Core drilling machine with core drill (200x265mm + 200x365mm), petrol engine drive, built in 1991 and 1985, 2 tanks for water supply, 2 drills/machines in total. Ser. Item no. : 32993 + 30429 External dimensions : approx. 380x500x1000mm Diameter core drill : 200x265 + 200x365mm Weight : approx. 40kg
Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear-Number: max. 3x drill-Admission: M8-right/left: rotating alternately-Distance drill: 25 mm, offset (see photo)-Number: 3 drill heads available-Price: per piece-Dimensions: 90/85/H70 mm-Weight: 1.6 kg/piece
Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multiple-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear, drilling head-Manufacturer: H&T, multi-spindle head max 3 drills-Admission: M8-Spindle drive: dimensions see photo techn. drawing-Spindles: 2x clockwise / 1x counterclockwise rotating-Distance drill: see photo-Dimensions: 120/85 / H79 mm-Weight: 2.6 kg
Longitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmTable length: 0 mmTable width: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 550 mmTable width: 320 mmLongitudinal travel (X-axis): 400 mmTransversal travel (y-axis): 250 mmVertical travel (z axis): 400 mmDrill capacity in steel: 20 mmTaper in spindle: MT: 2 Stroke of drilling spindle (Z-axis): 130 mmBore diameter max.: 75 mmDistance table to spindle: 600 mmSpindle speeds:steplessfrom: 120 rpmup to: 3000 rpmFeeds:Drill spindle slide:number (steps): 2 from: 0.03 mm/rup to: 0.06 mm/rVoltage 50 Hz 3x: 380 VoltSpindle motor: 0.75 HPMachine´s weight about: 1500 kgOverall dimensions machine:Length: 1400 mmWidth: 1500 mmHeight: 2100 mmVarious accessories:Tool cabinetDrill chuckSet of drillsSet of milling cutters
Longitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmTable length: 0 mmTable width: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 400 mmTable width: 300 mmLongitudinal travel (X-axis): 200 mmTransversal travel (y-axis): 200 mmVertical travel (z axis): 250 mmDrill capacity in steel: 10 mmTaper in spindle: MTDrill depth (spindle stroke): 70 mmDistance table to spindle: 320 mmSpindle speeds:steplessfrom: 150 rpmup to: 3000 rpmFeeds:Drill spindle slide:from: 0.015 mm/rVoltage 50 Hz 3x: 380 VoltSpindle motor: 0.5 HPMachine´s weight about: 700 kgOverall dimensions machine:Length: 1200 mmWidth: 1000 mmHeight: 1800 mmVarious accessories:Digital readout number of axis:: 2 Manufacturer: PHILIPS Drill chuckSet of boring headCentering microscopSet of drillsDevice for laying out
Longitudinal X: 0 mmCross Y: 0 mmVertical Z: 0 mmTable length: 0 mmTable width: 0 mmCNC Brand: 0CNC Model: 0 Technical dataTable length: 400 mmTable width: 300 mmLongitudinal travel (X-axis): 200 mmTransversal travel (y-axis): 200 mmVertical travel (z axis): 250 mmDrill capacity in steel: 10 mmTaper in spindle: MT: 0 Drill depth (spindle stroke): 70 mmDistance table to spindle: 320 mmSpindle speeds:steplessfrom: 150 rpmup to: 3000 rpmFeeds:Drill spindle slide:from: 0.015 mm/rVoltage 50 Hz 3x: 380 VoltSpindle motor: 0.5 HPMachine´s weight about: 700 kgOverall dimensions machine:Length: 1200 mmWidth: 1000 mmHeight: 1800 mmVarious accessories:Digital readout number of axis:: 2 Manufacturer: ELESTA Rotary table diameter: (Ref. 0330.2) Ø 300 mmDrill chuckSet of boring headMicroscopeCentering microscopCentering divice with dial indicatorSet of colletsSet of drillsSet of milling cutt ...
Center of spindle to column bus: 1610~350 mm Max. drilling Ø: 70 mm Spindle end to base work surface: 220 - 1050 mm Spindle stroke: 320 mm Spindle rotation: 30 - 37,5 - 47,5 - 60 - 75 - 95 - 118 - 150 - 190 - 235 - 300 - 375 - 475 - 600 - 750 - 950 - 1180 - 1500 - 1700 rpm Power: 4 kW
Holke PK050A column hole. Drilling capacity: 50. Table: 620x520mm. Speeds: 9 (54-1032rpm).
Working dimensions Panel size: X: min. 200mm / max. 3.200mm Y: min 70mm / max 920mm W: min. 8mm / max. 70mm machining in X-direction without reclamping: Milling / formatting minus cutter radius 1450 mm for complete machining (milling, drilling, grooving) 1300 mm machining in Y direction 920 mm Connected load: 14 kW operating pressure: 6.0bar Printing requirement: approx.300 NL / min. suction capacity: milling unit: approx.1,400 m³/h bottom left: approx. 1,400 m³/h rear: approx. 1,900 m³/h Drilling unit: type 7883 Drive power 1.7 kW/50 Hz Speed 1000 to 4400 rpm Drilling spindle holder: up to internal thread M10 with 11 mm fit, max- length of drills 70mm Direction of rotation left/right Loading of the drilling unit: Number of drills in Z direction 9, Numbe ...
Hütte D-100 directional drill with Halliburton H400, Crown 5 plunge pumps (2), complete with drill units and directionsl drill head, unmagnetic drill head, approx. 250 tons rods available (can be sold apart), cabin etc. etc. Complete or in parts.
Prismatic column drill. Drilling capacity: 60mm. Table: 700x600mm. Vertical travel: 800mm. Taper Morse 4. Speeds: 9. (50-1.084) Motor power: 7,5cv.
Prismatic column drill. Ready for automatic drill of flanges, rounds... Drilling capacity: 70mm. Spindle pneumatic work cycle. Indexing table. Chip conveyor. Working area guarding. Year: 1998.
Tool holder: MK 4 Drilling capacity in steel: 40 mm Drilling capacity in cast iron: 50 mm Tapping performance: M32 Speed range: 61 - 1169 min -1 (9 gear stages) Spindle stroke: 200 mm Feeds: 0.1/0.2/0.3/0.4 mm/U Table size: 480 mm x 560 mm Projection: 380 mm Column diameter: 180 mm Motor power: 2.2 kW Connection: 400V, 16A Weight: approx. 780 kg Dimensions (LxWxH), approx.:560 x 1040 x 2380 mm Equipment: - Machined foot with T-grooves - Speed adjustment in 9 stages via gear lever - Machine lamp - Feed device - Separate coolant device with pump and mounted coolant supply in the working area - R/L run - Thread cutting device - Emergency stop push button - Drilling depth stop - Automatic ejector - Lockable control box - Threaded chuck M3 - M12 with conical mandrel - Threaded chuck M12 - M42 with conical mandrel
IMR Model F.A. 2.5 S Sand Core Shooter, 2.5 litres San Capacity, 10 Sec Dry Cycle Time, 25 kg Sand Hopper Capacity, 100kg Core Box Weight. Size of heating plates: 200x350x60mm Max. size of core box: 400300x200Sp.mm Max. weight of core box: 100kg Max. distance between heating plates: 400mm Max. closing stroke: 300mm
Moving column boring machine INNSE FAC 221 for sale Technical data: - CNC: Siemens 840 D - X axis: 14.970 mm - Y axis: 6.000 mm - Z axis: 1,500 mm - W axis: 1.500 mm - V axis rotating support plane: 3.000 mm - Rotating support table dimensions: 5.000 x 4.000 mm - Fixed table dimensions: 8.000 x 7.440 mm - Maximum permissible load on the table: 120,000 kg - Spindle power: 130 kW - Number of spindle revolutions/minute: 700 rpm
High speed radial drilling machine. Fixed table of 1300x650mm. Drlling capacity: 32mm. Speeds: 12. (102-2000rpm).
4 axis deep hole drilling machine Brand: Ixion mod. TL1400 Year: 1996/1997 Mitsubishi M530 H control system Executions and Racing Sleeve TL 604 (Z) 600 mm. Sleeve TL 1004 (Z) 1000 mm. Operating unit for vertical drill (standard) (Y) 400 mm. Operating unit for vertical drill (option) (Y) 800 mm. Cross table (table surface 1375 mm. X 700 mm.) (X) 700 mm. Cross table (table surface 1675 mm. X 700 mm.) (X) 1000 mm. Mobile column in the boring direction (W) 1100 mm. Circular table (option) (B) 360 ° Work table Table surface (standard) 1375 mm. X 700 mm. Table surface (optional) 1675 mm. X 700 mm. Load on the table max 2000 kg. Bridge Tool SK 40 holder according to DIN 69871 Tightening bolts according to DIN 69872 Main spindle AC drive (3.0 kW) at 100% of the insertion ratio, S1 3.0 Kw 50% of the duty cycle, S6 5.5 kW Spindle speeds directly programmable 100- ...
Drilling Machines Base Table Dimensions, WxDxH: approx. 460 x 500 x 110 mm. Machined table surface, WxD: 120 x 110 mm, with 4 M 10 threaded holes. Table and flange surface one height. T - grooves: 14 mm, slot spacing: 160 mm. The basic table is from a column drill, probably made: IXION. Material: cast iron, weight: approx. 50 kg. Shipping with forwarding possible. The table is in good condition and can be visited in consultation and is immediately available. Please also note my other entries.
Inv. Num: 5098 Type: TS1 Producer: Juaristi Created: 1990 Parameters: Working table length: 1500 mm Working table width: 1200 mm Mechanical feed length Axis X: 3000 mm Mechanical feed length Axis Y: 1500 mm Mechanical feed length Axis W: 600 mm Spindle diameter: 125 mm Spindle speed: 2300 rpm Maximum table load (even): 5000 kg Cone: ISO 50
Philips Control Table Longitudinal traverse (Y) 2400mm, Table Cross traverse (X) 2400mm, Table Swivels 360 degrees Head stock vertical traverse (Z) 2000mm, Spindle & facing speeds 3 - 224 rpm, Spindle speeds 14 - 1116 rpm, Facing head diameter 820mm, Facing head slide cross traverse 190mm, Spindle traverse 770mm, Spindle diameter 125mm, Spindle Taper 50 INT, Table load 15 ton, Fitted with Two out riggers, Equipment Milling Head 360 degrees on two faces 50 INT. Length 6700mm Width 6500mm Height 4000mm Nett weight 33030 Kgs. / 32.5 Tons.
Various drill heads with internal cooling Diameter depth 80 mm 60 mm 72 mm 60 mm 65 mm 140 mm 2 pcs. 65 mm 170 mm 55 mm 130 mm 48 mm 140 mm 43 mm 140 mm 24 mm 60 mm 50 mm 55 mm 45 mm 50 mm 48 mm 60 mm 24 mm 70 mm 38 mm 50 mm 44 mm 50 mm 50 mm 55 mm 19 mm 40 mm 30 mm 40 mm with 2 holes 24 to 53 and 50 to 25 mm
Machine underwent extensive renovations with verification of all components and was completely modernized with Siemens S-7 electronics. The device includes: - Depalletiser - Bottle collecting table - Transporters, including some receiving drills - Pallet storage - Full pallet conveyor - Magazine cardboard dividers Yield: approximately 30 000 b/h. For more informations, please contact by e-mail or phone.
for sale -Drill -Brand:Mas -Type: VO50 -Year:1982 BSD INDUSTRY BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT MACHINE TOOLS OF ALL TYPES -Press Brake -Shear -Roller -Grinding machine -Tower -Milling machine, -Machining center -CNC Tower FORKLIFT PURCHASED AS IS TP EQUIPMENT OF ALL TYPES -LOADER -MINI-EXCAVATOR -SHOVEL -EXCAVATOR ECT .. -GENERATORS -EJP POWER PLANTS GAS TURBINE ALL TYPES OF VEHICLES
CNC controller: FP 80 Axes X-axis travel mm: 300 Y-axis travel mm: 250 Z-axis travel mm: 250 Distance between table surface and electrode clamp surface (for standard electrode and table): 223 - 473 Max. Electrode weight kg: 25 Worktable Table dimensions mm: 500x350 Maximum workpiece size (W × D × H)) mm: 740x470x130 Max. workpiece weight kg: 550 Working tank inner dimensions (W x D x H) mm: 770x500x230 Dielectric fluid reservoir capacity L: 165 Dielectric fluid filter method: paper filter Basic machine dimensions / weight Length mm: 1.460 Width mm: 1.900 Height mm: 2.075 Weight kg: 2.000
