We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,898 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Plate heat exchanger,stainless steel,Alfa Laval P01,painted edge-clamped. 9 plates.
used
Plate heat exchanger,stainless steel,Pasilac type N35 MGS,102 plates
used
Reference Num.: 3657 Brand: Beil Type: 780/425-S-H-AP Construction year: 1999 Available: directly Status: In production Location: Deutschland
used
length: 5.000 mm width: 2.000 mm Thickness: 210 mm material: Stahlguss total power requirement: kW Weight: 6000 kg dimensions of the machine ca.: m Measuring plate / alignment plate as good as new, with integrated alignment points, 3 x longitudinal T-slots, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Akyapak AHS 8/10x2100 4 rolls plate rolling machine Machine is in good working condition
used
AGFA Imaging Plate System / CR System CR 30-X (for Veterinarian) Primary processing station 3 CR cassettes • Before taking over, all devices and systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "AS" condition from the warehouse Freiberg (EXW), Saxony, Germany, and pay in advance. • Sold as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or system components must be carried out by the manufacturer or by a specialist or technician authorized b ...
used
Plate Filter JOLLY 20 For Juices, Wines, Beers and Oils - 2021 This plate filter was made by Italian MORI-TEM company in year 2021 and it has been only tested and thus in new like condition. Main structure is made of AISI 304 stainless steel, and the plates are made of food quality plastic material. It has been designed to clarify and sterilise red, white and sparkling wines, olive oil, vinegars, cosmetics, natural essences, herbalist products, sweet and dry liqueurs, etc. Equipment contains a food grade product circulation pump Technical characteristics Manufacturer: MORI-TEM S.r.l. Model: JOLLY 20 Manufacturing year: 2021 Capacity for oil: 100 litres/h Capacity for wine: 600 litres/h Number of plates: 21 Plate size: 20 x 20 cm Filtration area: 0.8 m2 Main dimensions: 72x43x55 cm (L x W x H) Machine weight: 36 kg Certification: CE
used
spindle diameter: 130 mm x-travel: 5000 mm y-travel: 3000 mm control: Heidenhain TNC 426 taper ISO: 50 P.D.B. w-axis: 900 mm z-travel: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Right Angle Vertical Head Spindle Support Metal Way Covers Operator Platform The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
- Retaining plate MWM 12300186 - Suitable for several motors - Please note! Price per piece! - 12300186 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating ne ...
used
spindle diameter: 125 mm x-travel: 2500 mm y-travel: 2100 mm spindle taper ISO: 50 spindle turning speed range: 5-1000 U/min spindle travel: 900 mm Radial face slide: 650 mm radial face slide travel: 250 mm angular milling head: rotary table:: table surface area: 2000x2500 mm table height: 800 mm table travel: 1700 mm total power requirement: kW weight of the machine ca.: 25 t dimensions of the machine ca.: m Table, Floorplate, tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
length: 3500 mm width: 4840 mm T-slots: 6 x M32 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Durma HRB 4-3025 CNC Plate Rolling Machine Machine is in good working condition
used
length: 7000 mm width: 7000 mm number: 8 Thickness: 350 mm T-slot - width: 36/58 mm T-slot - distance: 285 mm depth of the T-nuts: 62 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Panel consists of 8 panels Size per panel 3500x1750x350Number of T-slots per panel 7 pieces Total 49 m² The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
length: 9750 mm width: 4500 mm number: 9 T-slot - width: 32/48 mm T-slot - distance: 180 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The Palttenfeld consists of 9 plates, size per plate 3250x1500 mm, number of T-grooves per column 7, price 1000 €/m² The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
length: 6000 mm width: 3250 mm number: 4 T-slot - width: 32/48 mm T-slot - distance: 180 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The Palttenfeld consists of 4 plates, size per plate 3250x1500 mm, number of T-grooves per column 7, price 1000 €/m² The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 130 mm x-travel: 6000 mm y-travel: 2000 mm Plate area: 9000x6000 mm digital readout: AEG total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 125 mm x-travel: 2500 mm y-travel: 1900 mm w-axis: 1100 mm radial face slide travel: mm rotary table:: 1800x1300 mm table adjustable: 1000 mm digital readout: Pfillips workpiece: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 150 mm x-travel: 16000 mm y-travel: 3000 mm taper ISO: 50 w-axis: 1200 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 125 mm x-travel: 8000 mm y-travel: 3000 mm spindle bore: 240 mm w-axis: 1650 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 130 mm x-travel: 7000 mm y-travel: 2000 mm taper ISO: 50 w-axis: 1100 mm z-axis: 350 mm voltage: 400 V total power requirement: 30 kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 125 mm x-travel: 4000 mm y-travel: 2500 mm z-travel: 7000 mm taper ISO: ISO 50 P.D.B. total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Sahinler 4R HS 20-150 4 rolls plate rolling machine Working length : 2050 mm Machine is in good working condition
used
spindle diameter: 205 mm x-travel: 10000 mm y-travel: 2500 mm w-axis: 500 mm spindle travel: 1250 mm Control: Heidenhain type: TNC 355 spindle taper ISO: 50 transmission ratio: 2 feed - independent: 0-3000 mm spindle motor: 37 kW total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: 14,1x3,2x5,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Tangential grinding Kent brand Model KSG63-FD1 Table 300x600mm Availability: starting from April 2024 Year 2000
used
Used Faccin 2621 b3 Plate rolling machine Used machine visible in Italy, sold as it is
used
M. No.: 1683/22
used
MBO K55-4KTL + window buckle plate In great working condition. - 2 Knives - 4 buckle plates + window buckle plate - gluing system (not complete) - Vaculift, Vacubelt, Vacutable
used
Max. circling length: 3100 mm Max. metal sheet thickness: without pre-bend - 6 mm Upper cylinder diameter: 200 mm Side cylinder diameter:: 190 mm engine tilt:: 4 kW Engine hours worked: : about 60-80
used
CNC bending line for bending sheets up to a thickness of 8 mm and a width of 2500 mm. The machine is being sold due to its lack of use, it was practically unused. the machine is connected, functional and can be demonstrated in action.
used
Max. length of plate 2050 mm Max. plate thickness 4 mm Number of rolls 3 pcs Upper roll diameter 136 mm Lower roll diameter 136 mm Max. pre bending capacity 4 mm
used
Working length 2050 mm Maximum sheet thickness 4 mm Roller diameter 140 mm
used
Machine in good technical condition. Machine weight: 5300 kg Max. circling length: 2000 mm Max. sheet thickness: 12 mm Diameter of the upper cylinder: 220 mm Diameter of the lower cylinder: 200 mm Encircling speed: 6.2 mm/min
used
Capacity: 4250 x 8mm Hydraulic drive on the main role 3 roll driven Digital reading on the clamp and bending roller
used
The machine is in good technical condition. Max. length of circled sheet: 2000mm Max. thickness of circled sheet: 4mm It is fully functional and without defects. It is quiet and fairly accurate. By prior arrangement, the possibility of a tour in progress.
used
used
HENKE UNI 2000-6000 Built in 1995 Format: 400x400 2-speed 400x600 2-speed 1. Distributor for attachment 2. Doser 3. Settling device 4. Chain conveyor 5. Roller conveyor 6. Plate destacker 7. Cleaning device 8. Plate oiler 9. Pawl conveyor 10. Stacking device 11. Plate removal device with rotating device 12. Control for UNI 2000 13. Belt conveyor with lifting 14. Belt conveyor 15. Plate Displays 16. Carrier chain conveyor 17. Push-off device with roller table 18. Autom. Control for packaging 19. Fader Puller HENKE UNI 2000-6000 Year of production: 1995 Sizes: 400x400 2x 400x600 2x 1. First layer distributor 2. Dozer 3. Take-off device 4. Chain conveyer 5. Roll conveyer 6. Destacking device 7. Cleaning device 8. Oiling device 9. Slap converter 10. Stacking device with rotating device 11. Arm with rotating device 12. Control for UNI 2000 1 ...
used
Complete plate production plant OCEM / Cassani consisting of: - Dosing and mixing system Attachment mixer (Teka) like new (approx. 3 years old) - OCEM OPA108SB plate press with moulding device 400x400 4-fold - Attachment doser STP825 - Double washout system for exposed concrete (4-fold washing) - Flat shelf with transfer table - approx. 2,600 steel pallets - Cassani calibration machine - Grinding machine Cassani - Coating system with paternoster - Packaging line (built in 2019) Complete tiles/slab production line OCEM / Cassani consisting of: - Dosing and mixing plant - First layer mixer (Teka) as new (approx. 3 years old) - Double layer hermetic tile/slab press OCEM OPA108SB with mould equipment 400x400 4-fold - First layer dosing unit OCEM STP825 - Double washing system for washed concrete/exposed aggregates - Flat depositing system ...
length: 12000 mm width: 4000 mm number: 6 Thickness: 300 mm T-slot - width: 36/60 mm T-slot - distance: 235 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Panel consists of 8 panels Size per panel 3500x1750x350Number of T-slots per panel 7 pieces Total 49 m² The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
UBR32x2500 sheet metal rolling mill Year of production 1969 Dismantling, transport and all related costs are the responsibility of the buyer
used
Disma Model 13-TLS motorized cylinder with 1050mm tempered roller. Rollers diameter 90mm. Voltage 3PH/380V
used
length: 5200 mm width: 2000 mm Thickness: 400 mm number of T-slots: 6 T-slot - width: 32 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
he machine is in good technical condition, can be tested under power. Four-cylinder turning machine. Producer: MG s.r.l., Italy Four cylinders with a length of 2050 mm Diameter of the upper cylinder: 140 mm Diameter of the lower cylinder: 130 mm Diameter of side rollers: 105 mm Sheet rolling thickness: 4 mm. Sheet pre-bending thickness: 2 mm Power: 3 HP = 2,237 Kw Weight: 1.9 t
used
Kilia ribbon mixer-grinder, plate diameter: 130 mm, total dimensions: 1250 mm x 1050 mm x 1500 mm. Including 2 crates with extra plates.
used
Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs -Length: 510mm -Width: 310mm -Height: 65mm -Plate thickness: 27 mm -Weight: 37.7 kg
used
length:1000 mm width:800 mm weight of the machine ca.:0,7 t dimensions of the machine ca.:1,0 x 0,8 x 1,4 m Hardstone measuring plate complete with FISCHER tailstocks and 4 leveling elements.
used
length:1600 mm width:1000 mm plate height:200 mm weight of the machine ca.:1 t dimensions of the machine ca.:1,6 x 1,0 x 1,3 m Hardstone measuring plate with support desk and 2 tailstocks
used
diameter:400 mm total power requirement:110 V, 125 W weight of the machine ca.:72 kg
used
sheet width:3050 mm plate thickness:4 mm total power requirement:9 kW weight of the machine ca.:6 t dimensions of the machine ca.:3900 x H 1850 x T 2100 mm
used
length:1500 mm width:1000 mm weight of the machine ca.:0,2 t dimensions of the machine ca.:1,5 x 1 x 0,8 m Surface plate / Welding bench with underframe
used
stone measuring plate 400 x 400 x 50 mm ( 3 pieces available / price per piece )