copco used for sale

Air Pressure: 42 bar

Air filter -Type: 1030 0979 00 -Dimensions: Ø 350/H360 mm -Weight: 4.5 kg

110,0 kW, max. 8,5 bar, 18,72 m3/min.

250 kW, max. 10.0 bar, 35.88 m3/min.

250 kW, max. 10,0 bar, 35,88 m3/min.

200.0 kW, max. 10.00 bar, 30.00 m3/min. oil-free, water-cooled, excellent condition.

160.0 kW, max. 7.50 bar, 27.40 m3 rpm, oil-free, air-cooled

160,0 kW, max. 7,50 bar, 27,40 m3/min, oil-free, air cooled.

Compressed air screw compressor, 75.00 kW, 3x GA 808 and 1x GA 810

Rotary Screw air compressor, 75.00 kW, 3 x GA 808 and 1 x GA 810

90.0 kW, 10.0 bar, 15.0 m3/min. With frequency inverter. Volume flow 2.4 - 15 m3/min at 7.5 bar.

90,0 kW, 10,0 bar, 15,0 m3/min. With frequency inverter. Volume flow 2,4 - 15 m3/min at 7,5 bar.

90.0 kW, 8.0 bar, 12.78 m3/min. Oil-free, air-cooled.

90,0 kW, 8,0 bar, 12,78 m3/min. oil-free, air cooled.

75.0 kW, max. 13.0 bar, 13.80 m3/min. With built-in frequency inverter. Volume flow 2.0 - 13.8 m3 rpm.

With articulated carrier DC26, load: 108kW, max. driving speed 16km/h, tyre size: 14.00 R24 A, 2x drill arm BUT 35, Diesel Power Generator Deutz BF4M 1013C, drill mounts BMH 6414, max. drill rod length: 4321mm, max. drilling depth: 4020mm, loading platform HL 210, CE standard, air/water flushing, heat exchanger and high-pressure pump Swellex, without drill hammers.

Max. operating pressure: 12.75bar, operational hours counter: 52,000h, with Pressure Tank JOSEF MEHRER.

75,0 kW, max. 13,0 bar, 13,80 m3/min. With built-in frequency inverter. Volume flow 2,0 - 13,8 m3/min.

45.0 kW, max. 7.50 bar, 6.06 m3/min. oil-free, air-cooled.

45,0 kW, max. 7,50 bar, 6,06 m3/min. Oil-free, air cooled.

160 kW, max. 7.50 bar, 30.30 m3/min. With built-in compressed air dryer.

Volume flow: 33m³/h, power: 212kW, operational hours counter: ca. 71,500h, with condenser, dryer and two filters.

Volume flow: 20m³/h, power: 137kW, operational hours counter: ca. 90.500h, with condenser, dryer and two filters.

Max. pressure: 8bar, rotational speed: 2970/min, connected load: 75kW, operational hours counter: 87,184h, the first pressure level needs overhauling.

160 kW, max. 7,50 bar, 30,30 m3/min. With built-in compressed-air dryer.

315 kW, max. 10.0 bar, 41.20 m3/min. oil-free, water-free. Voltage 3300V, 3ph, 50 Hz. New control electronics Mk4.

315 kW, max. 10,0 bar, 41,20 m3/min. Oil-free, water cooled. Voltage 3300V, 3ph, 50 Hz. New controller Elektronikon Mk4.

Max. pressure: 8.6bar, rotational speed: 2970/min, connected load: 88kW, operational hours counter: 71,159h, the first pressure level is defective.

There are two Adsorption Dryer MD 200 available, year of construction machine 1/ 2: 2017/ 1998.

Max. operational pressure: 10bar, connected load: 4kW, weight: 193kg, operational hours counter: 8717h.

Operating hours: 70,542h, was serviced by the manufacturer, one stage was already replaced at 35,000 operating hours.

160.0 kW, max. 7.50 bar, 22.70 m3/min. oil-free, air-cooled

160,0 kW, max. 7,50 bar, 22,70 m3/min. Oil-free, air cooled

110.0 kW, max. 20.0 bar, 12.60 m3 rpm, with built-in dryer. only 80 operating hours. State as new.

132 kW, max. 10 bar, 18.3 m3/min. oil-free, water-covered

Max. operating pressure: 7.5bar, volume flow: 104l/s, rotational speed: 3000/min, nominal shaft power: 37kW, weight: 965kg, with Refrigeration Compressed Air Dryer airgroup AGD 780.

Operational hours counter: ca. 75,000h, was maintained regularly, with documentation.

Nominal motor power: 15kW, operational hours counter: ca. 85,000h, was maintained regularly.

Working hours: 30000h, P max.: 8.3bar / 120psi / 0.83MPa, QV: 13l/s / 27.5cfm / 0.78m³/min, P motor: 5.5kW / 7.5hp, n motor: 2940rpm, weight: 338kg. An on-site inspection is possible.

132 kW, max. 10 bar, 18,3 m3/min. Oil-free, water cooled

400 kW, max. 8 bar, 61.32 m3/min. oil-free, water-free. Screw elements have 16000 working hours.

400 kW, max. 8 bar, 61,32 m3/min. Oil-free, water cooled. Air ends (screws) have 16000 working hours.

An inspection is possible.

Power: 60kVA, length: 2730mm, width: 1100mm, height: 1795mm, weight: 1.525t, operational hours counter: 5559h.

Volume flow: 15m³/min, motor speed: 3000/min, connected load: 75kW, weight: 1.534t, with documentation, an on-site inspection is possible.

Max. operating pressure: 3.5bar, max. rotational speed: 2980/min, connected load: 73 kW, an on-site inspection is possible.

160 kW, max. 7.5 bar, 26.88 m3/min.

160 kW, max. 7,5 bar, 26,88 m3/min.

75 kW, max. 8.60 bar, 11.20 m3/min. oil-free, air-cooled.