127,604 used machines on RESALE, but how to find them? Machine Search
Air cooler, evaporator, cold cell, industrial cooler, cooling unit, cooler, water cooler, cooling system, cooling -Manufacturer: Gretag Cooler -Cooling system comes from a marking laser SLS Spectron Laser Systems -Type: Handling Gretag Laser 6211 -for distilled water -Dimensions: 482/620/H177 mm 590/240/H705 mm -Weight: 37kg
Air cooler, cold storage, refrigerated container, cold room -equipped with: 4x fans -Cooling capacity: 70 kW -Air flow rate: 39,673 m³/h -Area: 348 m² -Slat spacing: 10 mm -Fan diameter: 500 mm -Lamb spacing: 10 mm -Housing: made of stainless steel -Drip tray -Number: 2x coolers available -Price: per piece -Dimensions: 4550/1100/H940 mm -Weight: 600 kg/piece
Air cooler, evaporator, cold storage, refrigerated container, cold room -Area of application: for connection to a cooling system -Fan diameter: 500 mm -Maximum permissible operating pressure: 8 bar -Permissible operating temperature: 100 °C -Pressure at sub-zero temperatures: 21 bar / -60 °C -Contents: 13.2 liters -Slat spacing: 7 mm -Number: 2x coolers available -Price: per piece -Dimensions: 1350/740/H700 mm -Weight: 174 kg/piece
Continuous tunnel cooler with short heat-holding section, make Steiner, type TP 900/5000, year of manufacture 2012, for the continuous pasteurization/cooling of hot-filled products, such as jam, marmalade, dips, seasoning sauces or spreads in jars,, Usable belt width: 900 mm,, Usable tape length: approx. 5,000 mm,, Adjustable throughput times: 11.26 - 49 minutes,, Nominal throughput time: 29 minutes,, 4 circulation pumps (1.1 kW),, Holding zone (5min), 3 cooling zones (each 8 minutes),, Max. container throughput height: 220 mm,, energy consumption at cont. Operation: approx. 70 kg steam / h,
Air cooler, evaporator, cold room, industrial cooler, cooling unit, cooler, water cooler, cooling system, refrigeration, cold storage, refrigerated container, cold room, heat exchanger -Manufacturer: Goedhart, industrial cooler type DVS-O 614010 -Fan diameter: 400 mm -Operating pressure: max. 5 bar -Operating temperature: max. 50°C -Dimensions: 1410/1170/H700 mm -Weight: 129 kg
Air cooler, evaporator, cold room, industrial cooler, cooling unit, cooler, water cooler, cooling system, refrigeration, cold storage, refrigerated container, cold room, heat exchanger, jet stream, cooling fan -Manufacturer: Port-A-Cool, mobile cooling fan type PAC2K36HP220-50 -Fan: Diameter: 36 / 914 mm Speed adjustable -Operating pressure: max. 3.45 bar -Voltage: 230V 50Hz / 5.5A -Dimensions: 1575/820/H1590 mm -Weight: 112 kg with pallet
30-position tool changer Minimum and maximum tool diameter: 76/125 mm Maximum tool length: 280 mm Maximum tool weight: 7 kg Including tool holders and related drills/cutters. Assorted quantities and types, as shown in the photo. The total availability of individual visible elements is not guaranteed. Auction-ID: A7-45181-10
Tecnopool spiral cooler, model: TW 4-350, serial number: I0002129-001330, year of construction: 2018, plastic mesh belt, belt width: 330 mm, total belt length: 192000 mm, useful belt length: 173000 mm, tier length: 19463 mm, tier pitch: 220 mm, clearance between tiers: 170 mm, maximum product height: 1.1-2.75 m/min, belt cleaning system. Cooling compressors not included. Lot is already dismantled and ready for transportation.
Speed 1400 1/min, max. pressure 25 bar Auction-ID: A7-45702-19
Volume 152.6 l, max. pressure 32 bar Auction-ID: A7-45702-15
Volume 17.5 l, max. pressure 32 bar Auction-ID: A7-45702-17
Volume 152.6 l, max. pressure 32 bar Auction-ID: A7-45702-16
Type: RHS 1 U 200 GR 360, Y&cams: 1995, engine: Loher, 4,500 rpm / 5.5kW, on base frame, with suction and pressure bellows and 7 vibration dampers.
Units for painting booth with heat recovery Make, Type : Wolf, WLE-S 230 Built: 1998 Supply air unit: 21,200 m3/h; 7.5 kW; 1028 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1028 rpm Heating unit: 209 kW Brenner : Gasbrener Dry temperature: max. 80 degrees C Heat recovery: cross-current heat exchanger (max. 50% energy saving) Blow-in hood : 90O-bow, blow-in hood in the supply air cover Dimensions: 1.5 m x 4.5 m x 3.8 m (approx. WxLxH) Electrics : Control cabinet Other : Supply and exhaust air pipes, deflector hood and Exhaust fireplace on request Location : Nuremberg Warehouse Sell price: € 6,995,- net, from location in Nuremberg, Plant is already dismantled ! This plant has already been sold. However, we have similar plants in stock. Please ask. We also have complete painting booths, drying booths and spare parts for painting systems in ...
We have 2 pieces control cabinet fans from Rübsamen & Mr Type: LS0, 20W, 0.14 A and 230V the dimensions are 240 x 240mm, one fan is unused = 12,-€ and one was briefly in use = 10,-€
Portable fan / exhaust fans Stratos Ventilatoren GmbH Fan with ABB electric motor 0,75 KW, 400V, 50 Hz, 1,9A, 2850U/min Used
complete system from 4Jet to the edge deletion of thin film Solarzellengehoert originally, to the 2 sputtering equipment offered by us by Lakkoju H3200Randentschichtung • non-contact procedure without damage to the substrate, no micro-cracks • dry process with no grit, no chemicals, wenigerEntsorgungsvolumen, eco-friendly • effective decoating of TCO, semiconductors undRueckkontakten - 1000V-Test > 10 GOhm • no additional cleaning necessary • reproducible results • optional laser cleaning of the cut edges! • discharge layering zones can be flexible - Glastoleranzangepasst • all metal front or rear contacts (MO , Al, AG) • all major semiconductor (a-Si single junction/tandem junction, CIS, CIGS, CdTe) • all TCO layers (ITO, ZnO, SnO2) MEX molybdenum ...
Suction blowers 11 kW approx. 1200 mm direct drive
technical details: - Position: GR 360 (pos. 5) - Diameter suction nozzle: 250 mm - Diameter pressure nodle: 250 mm - Steel impeller: curved - Air volume flow (V nominal): 5,400 m³/h - New engine Engine data: - Motor manufacturer: SEVA Tec - Motor power: 7.5 kW - Voltage: 400 V - Current: 13.7 A - Frequency: 50 Hz - Speed: 2,920 rpm Dimensions (H x W x D): 1,130 x 850 x 690 mm Transport dimensions (H x W x D): 1,300 x 800 x 1,200 mm (on EURO pallet) Weight: 250 kg Consoles and vibration dampers can be requested and supplied on request. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
ABEGG Ventilatore ZIEHL. noch nie benutzt NEW 4 PCs.
High performance blower fan dust blower Built in 1967 Type 1000 275 R MD 63 m³ / s 1000 u/min 71.3 kw Manufacturer Heinrich Lühr dust technology
technical details: - Position: GL 360 (pos. 1) - Speed: 1,450 rpm = slow speed - Volume flow: 6,500 m³/h - Size: 355/4 - Power: 11 kW - Pg: 230 for air at +20°C and density = 1.2 kg/m³ - Voltage: 380/600 V (triangle/star) - Current: 22.5/13 A - Frequency: 50 Hz - Weight: 323 kg Metrics: - Housing (H x W x D): 1,475 x 800 x 1,260 mm (incl. motor) - Diameter suction nozzle (suction side): 380 mm - Diameter pressure connection (pressure side): 320 mm Transport dimensions (H x W x D): 1,630 x 800 x 1,200 mm (on EURO pallet) The fan was completely refurbished and painted in our house. Among other things, the motor shaft bearings were renewed. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
technical details: - Position: GR 360 (Pos.5) - Diameter suction nozzle: 300 mm - Diameter pressure nozzle: 280 mm - Volume flow: max. 4,600 m³/h - Pg : 275 for air at 20°C and ρ =1,2 kg/m³ - Steel impeller straight + + + New engine + + + electrical connection: - Motor manufacturer: SEVA Tec - Motor power: 7.5 kW - Voltage: 400 V - Current: 14.3 A - Frequency: 50 Hz - Speed: 1,450 rpm - Dimensions (H x W x D): approx. 1,580 x 1,380 x 760 mm - Transport dimensions (H x W x D): 1,800 x 1,400 x 800 mm (on EURO pallet) - Weight: 400 kg The fan has been cleaned and checked for correct functioning. The engine was renewed and the impeller balanced. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
Fans 500 to 28,000 m3/h Sales prices: € 100,- per 1000 m3/h so a fan with 5000 m3/h costs € 500,- plus VAT. We have fans for painting booths, suction walls, drying booths, paint storage rooms and other applications in stock. Please ask us. For painting systems we have complete units, luminaires, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.
specifications: -Fan for chip extraction - Type GL90 - Diameter intake manifold: 250 mm - Diameter exhaust nozzle: 250 mm - Dimensions decoupling on the blow-out side: length 230 mm, diameter 250 mm - Dimensions housing without decoupling (L x W x H): 850 x 600 x 740 mm - Dimensions housing with decoupling (L x W x H): 1080 x 600 x 740 mm - Motor turning left - Volume flow: 4,590 m³/h at 1,750 Pa Engine data: - Voltage: 400 V - Rated current: 8.6 A - Power: 4.0 kW - Revolution: 2,880 rpm - Starting current: 50 A (only in star-delta circuit) ! Transport dimensions (L x W x H): 1,200 x 800 x 910 mm (on pallet!), 1 packaging unit Weight: 110 kg The fan is completely cleaned and has been tested for its function. (Changes and errors regarding technical data and prices excepted!)
technical details: • Position: GL 360 (pos. 1) • Diameter suction nozzle: 200 mm • Diameter pressure connection: 200 mm • Volume flow: 3,380 m³/h • Pressure increase: max. 2,000 Pa • Steel impeller: straight • Dimensions (H x W x D): 1,080 x 560 x 700 mm (incl. motor and nozzles) electrical connection: • Engine manufacturer: VEM • Motor power: 3.0 kW • Voltage: 380 V • Current: 6.15 A • Frequency: 50 Hz • Revolution: 2,840 rpm Transport dimensions (H x W x D): 1,230 x 1,200 x 800 mm (on EURO pallet) The fan has been mechanically and electrically tested and has been repainted. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
Fan Polytechnik L 300 Masch. No. 82261 Speed 1400 RPM Performance 7200 m3 / h Motor 380, 50 V, 7.5 kW Pressing 215 mm / WS Connection ø 300 mm H x W x d: 1080 x 950 / 1350 x 950 cm Weight 170 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
technical details: • Position: GR 360 (pos. 5) • Diameter suction nozzle: 200 mm • Diameter pressure connection: 200 mm • Volume flow: 3,820 m³/h • Steel impeller: straight • Dimensions (H x W x D): 1,080 x 590 x 700 mm (incl. motor and nozzles) electrical connection: • Engine manufacturer: VEM • Motor power: 4.0 kW • Voltage: 380 V • Current: 8.4 A • Frequency: 50 Hz • Revolution: 2,885 rpm Transport dimensions (H x W x D): 1,230 x 1,200 x 800 mm (on EURO pallet) The fan has been mechanically and electrically tested and has been repainted. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
Fan Polytechnik L 200 Connection of 200 mm H x W x D: 650/1150 x 960 x 700 mm Built in 1982 Weight approx. 150 kg Masch. No. 82261 Speed 1400 rpm Leistutng 3410 m3 / h Engine 4 kW Pressing 238 mm / WS The machine is in good condition, ready for operation. Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
RADAX high-pressure duct fan High-pressure duct fan with cylindrical pipe sleeve, flanges on both sides, directly driven. Cylindrical galvanized steel tube Sheet metal, with double-sided moulded Flange, hole pattern according to DIN 24155, recessed built guide wheel. Semi-axial impeller, eight spatially connected curved blades made of thermoplastic, Balancing quality G 6.3 according to VDI 2060 and DIN ISO 1940. Three-phase squirrel-cage motor by Voltage reduction speed controllable, Thermal contacts, closed design, maintenance-free, sealed, low-noise Ball bearings with long-term lubrication. Fan data (default) Seawater version. Also resistant to weak acids and alkalis. NEW!
Güntner GVH 102B/2x2N air-cooled condenser Patented Güntner support tube design All fans in ISO F version Performance data in R404A Condensing Block: The refrigerant-carrying core tubes are relieved by the patented support tube construction. This results in increased protection against leakage. Copper tube ∅ 12 mm, 50 x 25 mm offset Aluminium slats, spacing 2.4 mm Distribution and manifold pipes as well as pipe connections in copper Permissible pressure: ps=28 bar Permissible temperature: ts=100°C Ventilators: Low-noise axial fans with maintenance-free motors with protection class IP54, three-phase 400/3/50, according to DIN 40050 Execution: Insulating material class F Permissible conveying temperature -30 to +55°C All three-phase fans are generally equipped with 2 speeds (∆-Y switching) as well as speed-adjustable by means of Güntner control devices ...
Te Coop: Westfalia Centrifugaalpomp type MZB 10 6 fans. Seal on watercooling op flens 1 P11 96 PD 6 bar. Machine no. 1713-935 Max type 1700 rotation/minFlender ATB-Loher Electorpomp ANGa 132MB 06D 4 KW 220 / 380 V 16/9.3 A
MIAG Ventilator/Fan HRBW S09-1000 130 m³ / min 1000 mm water column 50 kw Intake of 300 mm x 400 mm With continuous shaft, front and rear bearings Inlet from top, outlet diameter 360 mm The unit has been cleaned. We have many different fans from 28 kw to 90 kw output. We are looking forward to your inquiry!
A used fan is sold: Rippert RV80 - 800-765-B5 Year 2007 (2017 overhauled) 27000m ³/h Booster 1262PA
DV EC 250 Pro Roof fan with EC motor and pressure control Roof fan with EC technology. Aerodynamically designed housing made of high-quality polypropylene in grey, diagonally blowing. Operating range from -30 to +80 °C. Integrated guide vanes for optimum efficiency. For horizontal mounting. Diagonal impeller made of aluminium, motor-impeller unit dynamically balanced. Electronically commutated DC outrunner motor with ball bearing for continuous operation. High efficiency even in regular operation. Maintenance-free and radio interference-free. Stepless speed control with the speed potentiometer P.. 10 (Accessories). In conjunction with the universal control system EUR EC (accessory), the fan can be used to control differential pressure, differential temperature or flow velocity. Dimensions: L=57cm / W=57cm / H=55cm Original price Fr. 2600.- 2 pcs. available
Extractor fan 4 Fagida MD Year of manufacture 2002 L x W x H: 80 x 60 x 80 cm Weight approx. 120 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Exhaust fan Tube ø 350 mm Fan ø ± 750 mm Engine 11 kW Built in 1995 Weight approx. 190 kg L x W x H: 100 x 80 x 100 cm The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Dear Ladies and Gentlemen, We hereby offer the following original and newly packaged AXIMAX Blue Fan. aximax axial fan NW500 Type: AXK 500-6BD2-20°-3 with attached three-phase motor IE3 3 kW; 3000 min-1; 400V 50Hz with PTC for FU operation with protective grille between impeller + motor New and unused! Hours: 0 Details can be found in the pictures and PDF in the advertisement. Prior sale/errors/changes at any time reserved, EXW Beesten Price VHB! If you have any questions, please feel free to contact Sascha Neuwirth at any time Service for all aspects of the gas engine EPS BHKW GmbH Speller Straße 12 49832 Beesten Phone: +49 5905 945 82-0 Fax: +49 5905 945 82-11 Mail: info@eps-bhkw.de
Centrifugal fan / blower / fan Hürner-Funken made of chemical-resistant plastic The housing and impeller of the fan are made of chemical-resistant plastic and suitable for aggressive media in the process exhaust air. Manufacturer Hürner-Funken GmbH 35325 Mücke-Atzenhain Type 16-RU 315 MN/0/1420 Factory No. 2-29191/00 Built in 1999 Air capacity / volume flow 2166 / 1900 m³/h Motor power 1.50 KW, 1619/1420 rpm. Pressure difference 1287/990 Pa Conrad Meisenheim electric motor Type DR 90 L-4 No. 304987 1.5 KW, 400/230 V star/delta, 3.4/6 A, 50 Hz Iso F, IP55 1420 rpm, cos phi 0.82 Chemically resistant, corrosion resistant. The centrifugal fans made of plastic are specially designed for pumping chemically aggressive exhaust air. They are characterized by the highest corrosion resistance. In addition, they achieve high volume flows and Pressure differences wit ...
Item number 90031-0068 Power Supply for Tetra Pak machines e.g. TBA 8, TBA 19, A 3 flex, TCBP 70 GE FANUC Series 90-30 High Capacity Power Supply Programable
Suction fan Pipe of 300 mm Engine 4 kW The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
High-pressure tube fan made of aluminium, AD710mm, TDE 500 D4, Ruck, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Used part! The part was purchased from a spare parts warehouse of a company, is in a very good condition and fully functional. High-pressure tube fan, diagonal impeller ventilation fan, TDE 500 D4, Ruck, up to 9880m³/h, 3.3 KW, 400 V, do not operate without FIS! Aluminium design, AD 710mm, L730mm, incl. industrial plug Ensuring the function In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. We will refund the buyer only the product price paid to us. For these goods we have to exclude warranty claims of the buyer for improve ...
Year of construction approx. 2014 Greenline Version - Energy Saving (IE2) Conveying equipment temperature up to +120°C Multifunctional use, e.g. for kitchen exhaust air, industrial exhaust air Double-walled housing, soundproofed (50 mm rock wool – non-combustible, DIN 4102) Inspection door simplifies maintenance work Voltage/frequency: 400 V / 3 ph / 50 Hz Power: 3670 watts Current: 6.16 Amps Speed: 2890 1/min Protection class: IP 55 Motor protection: PTC (PTC) Max. conveying device temperature: +120°C Motor Type Efficiency/Adjustable: IE2 / FU Adjustable (Greenline) Max. volume flow: 7513 m3/h Motor outside air flow complies with DIN 18869-T1: yes Sound pressure level 4m: 53 dB(A) Insulation/Insulation Housing: Double-walled with 50 mm mineral wool (non-combustible) Housing material: galvanized sheet steel Outer Dimensions: 770 x 770 x 655 mm (L x D x H) Connecti ...
Extraction unit for filler station or preparation station: Make : Wolf Year of construction : 2009 Dimensions : 1.5 m x 1.5 m x 1.5 m (approx. WxLxH) Volume flow : 19,000 or 9,500 m3/h, 1895 or 948 1/min; 7.5 or 2.0 kW Pipelines : optional exhaust air pipes and deflector hood. Electrics : Control cabinet Location : Warehouse Area Nuremberg Retail price : € 3.350,- net ex location
We sell here 2 used fans function checked. The following information and performance data: Axial fan with crescent blades and square wall ring plate. ECblue Type: FN063-ZIQ.GL. A7P3 Fan Type DOE: Axial panel fan VDE ID card no. 40059052 UL Recognized Component E347018 ZC-155 3~ 380-480V 50/60Hz P1 3.70kW 5.9-4.7A 1600/MIN 65°C IP55, THCL 155 IE5 ECblue BASIC-MODBUS ErP compliant 2015 N=44.5 statA=41.7% VSD integrated MK152-A28-27 Integrated controller Connection diagram: AP00001C ECblue BASIC-MODBUS Performance Shield: 1x fixed. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as po ...
Soundproofed, silent duct fan, TD2000, D315mm, S&P, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - has very slight storage marks, no effect on function 83 x 40 x 40cm, ca. 30kg 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.
Suction blower MTV 6040 D Masch. Item no. 708,438 Motor power 11 kW 1450 rpm ø approx. 700 mm Year of construction 1982 The machine is in good condition, ready for operation Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12
maximum number of results exceeded
please refine your search
70.000 € 
