Manufacturer:
(Category: 1406)
Kannegiesser belt conveyor Belt conveyor GF 1750-880-800 RA1306 Technical data: Conveying length (NL): 1750 mmFramework width (NB): ca 880 mmbelt width (GuB): 800 mmHeight/band run (BH): 420 mm +/- 100 mmNumber of support feet: 2 piecesLoad (kg/m): 75 kgConveying speed: kontact usElectrical data: 400 V / 50 Hz / 0,75 kWYear of construction: 01/2018 Not the right one for you? On our website you will find more articles or simply contact us. All prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 WürburgFeatures: Construction year: 2018condition: good (used)Conveying length in mm: 1750Nominal / outside width in mm: 880Belt width in mm: 800Driven: YESKW: 0,75/S1Conveyor speed m / s: freely adjustablescope of delivery: inklusive Frequenzumrichter, including supports without side guides For individual, professional advice, simply get in touch with us.Simply contact us b ...
Transnorm belt curve conveyor left GKF 90°-600-400-IR1000 - NEW RA2307 Technical data:Frame width (NB): 600 mmFrame width with Bearing cover and motor: 850 mmbelt width (GuB): 400 mmheight (BH): 220 mm height with motor (MH): 350 mmInner radius (IR): 1000 mmConveying angle: 90° degreesConveying speed (v m/s): 1,0m/sDrive: SEW motor motor Electrical data: 50Hz V380-500, kW 0,75 / S1Year of construction: 2021Height Sideguides: 194 mm Optionally available:SupportsFrequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 WürzburgFeatures: Construction year: 2021condition: newNominal / inner radius in mm: 1000Nominal / outside width in mm: 600Belt width in mm: 400angle: 90°Driven: YESRunning direction: LINKSEngine type: SEW EurodriveKW: 0,75/S1Conveyor speed m / s: 1,0scope of delivery: including si ...
Conveyor belt / accumulation conveyor / belt conveyor Working height approx. 850 mm, can be adjusted. Length 1000 mm Width approx. 500 mm Equipped with photocell to stop product when downstream machine occupied (contact for pre and redesigned machine available). Equipped with its own drive and controls. Transport speed is infinitely adjustable via potentiometer.
Transnorm curved belt conveyor left 45°-950-800-IR900 RA2306 Technical data:Frame width (NB): 900 mmFrame width with Bearing cover: 950mmFrame width with Bearing cover and Motor: 1250 mmbelt width (GuB): 800 mmheight (BH): 250 mmInner radius (IR): 900 mmConveying angle: 45° degreesconveying speed (v m/s): 0,42-1,50 m/sDrive: SEW motor motor with frequency converterElectrical data: 50Hz V380-500, kW 0,75 / S1Year of construction: 2022Height Sideguides: 200 mm Optionally available:Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 WürzburgFeatures: Construction year: 2022condition: newNominal / inner radius in mm: 900Nominal / outside width in mm: 950Belt width in mm: 800angle: 45°Driven: YESRunning direction: LINKSEngine type: SEW EurodriveKW: 0,75/S1Conveyor speed m / s: freely adjustablescope of delivery: including side guides without supports, inclu ...
Transnorm angled-belt conveyor 45° 1400-1050-800RA2304ExhibitMake: TransnormYear of manufacture: 2022Inlet angle: 45Length center: 1400 mmBelt width (RB): 800 mmFrame height: 270 mmNominal/external width (NB): 1050 mmConveying speed: 0.717 mm/sV230/400kW 1,5Overall height side wall: 300 mmScope of delivery: with motor and side guides (if required, please ask) Optional:SupportsFrequency converter for infinitely variable speed controlPrice plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 WürzburgFeatures: scope of delivery: including side guides without supportsangle: 45°KW: 1,5/S1condition: AusstellungsstückBauhöhe in mm (BH): 270Antrieb: SEW GetriebemotorOptional erhältlich: Füße, Movi-MotElectric data: 380-400Frame width in mm (NB): 1050Conveying length in mm (NL): 1400Belt width in mm (GuB): 800Construction year: 2022For individual, expert advice, simply get in tou ...
Transnorm angled-belt conveyor 30° 1750-1000-800RA2305ExhibitMake: TransnormYear of manufacture: 2022Inlet angle: 30Length center: 1670 mmBelt width (RB): 800 mmFrame height: 300 mmNominal/external width (NB): 1000 mm, 1200 mm with motorConveying speed: with Frequency converter for infinitely variable speed control between 0.25-0.75 mm/s, V230/400kW 2,2Overall height side wall: 200 mmScope of delivery: with motor and side guides Optional:SupportsPrice plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 WürzburgFeatures: angle: 30°scope of delivery: including side guides without supports, inklusive Frequenzumrichtercondition: AusstellungsstückAntrieb: SEW GetriebemotorElectric data: 380-400Bauhöhe in mm (BH): 300KW: 2,2Belt width in mm (GuB): 800Optional erhältlich: FüßeConstruction year: 2022Conveying length in mm (NL): 1670Frame width in mm (NB): 1000For individual, e ...
Transport with incline conveyor straight line length 8100 mm with incline conveyor length 1900 mm Currently conveys to a height of 1050 mm, but can be adjusted in pitch. Conveyor belt width 520 mm Total width 900 mm
Transnorm angled-belt conveyor 45° 1500-1250-1000RA1850ExhibitMake: TransnormYear of manufacture: 2018Inlet angle: 45Length center: 1500 mmBelt width (RB): 1000 mmFrame height: 270 mmNominal/external width (NB): 1250 mmConveying speed: 0.717 mmV230/400kW 1,5Overall height side wall: 300 mmScope of delivery: with motor and side guides (if required, please ask) Optional:SupportsFrequency converter for infinitely variable speed controlPrice plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 WürzburgFeatures: scope of delivery: including side guides without supportsConstruction year: 2018angle: 45°KW: 1,5/S1Electric data: 220-240, 380-400condition: AusstellungsstückConveying length in mm (NL): 1500Frame width in mm (NB): 1250Belt width in mm (GuB): 1000Bauhöhe in mm (BH): 270Antrieb: SEW GetriebemotorOptional erhältlich: Movi-MotFor individual, expert advice, simply get in t ...
Conveyor belt / belt flap / accumulation conveyor Working height approx. 850 mm, can be adjusted. Length approx. 600 mm Width approx. 450 mm Equipped with photocell to stop product when downstream machine occupies. Equipped with its own drive (attention, currently no own control). Equipped with recessed handle for easy product removal.
Conveyor belt / belt flap / accumulation conveyor Working height approx. 850 mm, can be adjusted. Length approx. 800 mm Width approx. 450 mm Equipped with photocell to stop product when downstream machine occupies. Equipped with function pass-through flap -> straps stop as soon as the flap is lifted. Equipped with its own drive and controls. Fixed transport speed, no frequency converter installed. Machine runs flawlessly. New conveyor belts were installed.
Flat Conveyor Belt FK 100 Width: 300 mm Length 2500 mm
Distribution belt / Deserting system For splitting a shingle stream into two processing lines Condition: overhauled, serviced, fully functional, ready for use
Bulk hopper approx. 3 CBM Filling height approx. 2.5 m Width 3.30 m Coarse grain screening Fume hood with trough screw Length = 7 m Diameter 40 cm Discharge height approx. 4 m Location Saxony-Anhalt
Transnorm conveyor belt GF 21100-700-600RA2204Technical data:Conveyor length (NL): 21100 mm frame width (NB): 700 mm, 800 mm with motorbelt width (GuB): 600 mmOverall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally availableConveying speed (v m/s): 0,42Drive: SEW gear motor, R27 DT90S4/THElectrical data: 50Hz V380-500, kW 1,1 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: condition: good (used)Conveying length in mm: 21100Nominal / outside width in mm: 700Belt width in mm: 600Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit SpannstationKW: 1,1/S1Conveyor speed m / s: 0,42scope of delivery: without supports and side ...
Transnorm curved belt conveyor left bend 45°-800-700 IR900RA2145Technical data:Manufacturer: TransnormCondition: good (used)conveying angle: 45°nominal/external width (NB): 800 mmbelt width (GB): 700 mminnerradius (IR): 900 mmoverall height (BH): 210 mmmotor height (MH): 450 mmMotor type: SEW gear motor, SA37/T DRS71S4/MM05/LNElectrical Data: 380-500 V, 0,55 kWConveying speed: Frequency converter for stepless speed controlScope of delivery: without supports (if required, please contact us)Optional: supportsSide guidesPrice plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 WürzburgFeatures: Construction year: 2014condition: very good (used)Nominal / inner radius in mm: 900Nominal / outside width in mm: 800Belt width in mm: 700angle: 45°Driven: YESRunning direction: LINKSEngine type: SEW EurodriveKW: 0,55/S1Conveyor speed m / s: freely adjustablescope of delivery: without s ...
Conveyor belt/accumulation conveyor with belt flap: - With 3 own drives - With 3 waiting positions - With its own control system - Length 600 + 600 + 800 mm = 2 m total - Max. speed 90 m/min. (adjustable via frequency converter) - Max. load 25kg/m - Max. stacking height 500 mm Application/Functionality: - Allows you to quickly traverse production lines without having to walk around them or climb over them with a ladder. Conveyor belt holds when belt flap is lifted. - If the following machine is occupied, the bundles/packages are stopped at three consecutive waiting positions until they are released by the following machine. - Contacts for release signal from upstream and downstream machine with plug connection 24V
Transnorm belt curve conveyor right 30°-1270-1100-IR900 RA2302 Technical data:Frame width (NB): 1270 mmFrame width with Bearing cover: 1390 mmFrame width with Bearing cover and gearbox: 1480 mmbelt width (GuB): 1100 mmheight (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mmConveying angle: 30° degreesmiddler conveying speed (v m/s): 1,4 m/sDrive: SEW motor motor with frequency converterElectrical data: 50Hz V380-500, kW 1,5 / S1Belt: KT 96 new Year of construction: 2021Height Sideguides: 194 mm Optionally available:Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 WürzburgFeatures: Construction year: 2021condition: newNominal / inner radius in mm: 900Nominal / outside width in mm: 1270Belt width in mm: 1100angle: 30°Driven: YESRunning direction: RIGHTEngine type: SEW EurodriveKW: 1,5/S1Conveyor spe ...
Conveyor width 800 mm Overall width 930 mm Width with control unit 1070 mm Working height adjustable from 720 mm to 950 mm Use: Conveying empty bags for filling, labeling or printing Marking or labeling of paper or plastic material Operating hours unknown
ID3345 Landbanden/Country conveyor belts year/Baujahr 2015 Land conveyor system consisting of: x 1400 mm x 190 m, belt speed 1.5 m/s, conveying capacity approx. 1000 to/h 1 x 1400 mm x 165 m, belt speed 1.5 m/s, conveying capacity approx. 1000 to/h Land conveyor system consisting of: 1 x 1400 mm x 190 m, belt speed 1.5 m/s, conveying capacity approx. 1000 to/h 1 x 1400 mm x 165 m, belt speed 1.5 m/s, conveying capacity approx. 1000 to/h
Code: 0335 Brand: SACOT Model: TRAN.ROT - CE Standard 90° automatic transfer of workpieces back to the operator, applicable to various processing machines, also for metal, plastic or leather processing - CE Standard Technical data: Max panel width 1300 mm Panel feed via motorised belt Wheels for movement Overall dimensions mm 3400 x 2300 x 1000 mm Weight kg 270
Kannegiesser belt conveyor GF 6250-680/600 RA1103 Make: Kannegiesser as good as new, exhibition machine Year of construction 2014 Conveyor length (FL): 6,250 mm Belt width (GB): 600 mm Nominal/outer width (NB): 680 mm Constant conveying speed: v=0.5 m/sec. Electrical data: 380V 0.25kW without control/connections to upstream and downstream conveyors Scope of delivery: without supports and side guides (please enquire if required) Optional: Supports Side guides on one or both sides Frequency inverter for stepless speed control Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 WürzburgFeatures: Construction year: 2014condition: as good as new (used)Conveying length in mm: 6250Nominal / outside width in mm: 680Belt width in mm: 600Driven: YESEngine type: NordKW: 0,25/S1Ampere: 0,9Conveyor speed m / s: 0,5scope of delivery: without supports and side guidesFür eine ind ...
Lippert belt conveyor GF 24500-650-500 RA1462 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 24.500 mmFramework width (NB): 650 mmbelt width (GuB): 500 mmheight (BH): 105 mm support feet: optionally availableConveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1Deflection roller (UR): Ø = 64 mmDrive drum (AT): Ø = 81 mmBelt: Type NNT-10 ENBUYear of construction: 200 ...
Aluminium Z-conveyor belt incl. substructure Horizontal range 1,200mm (customizable) Rising range 3,000mm (customizable) 2nd horizontal range: 1,200mm (customizable) Angle in the bend 45 degrees each Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable (can be moved) Conveyor belt width 700mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 80x50mm T-65Studs - 150mm 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is currently ap ...
working length: 1750 mmWorking width: 1000 mmWorking height: verstellbar mmused Haberkorn return conveyor device after four-sided planer-------------------------------------------------- -----Pos.1 Longitudinal-transverse longitudinal conveyor- Total length 1,750 mm- Depth outside 1,400 mm, inside 1,000 mm- height-adjustable support frames- continuously driven roller conveyor- Transfer to the cross conveyor by raising and lowering the roller conveyor- Cross conveyor with 5 traverses, continuously variable drive- Transfer as a lifting and lowering device to a driven roller conveyor, stepless- Including control cabinetPos.2 driven roller conveyor for return to the operator- height-adjustable support frames- Length 1,400 mm- Roll width 150 mm(Technical information provided by the manufacturer is not guaranteed!)The data for this ad was created with ModulMWS - the software solution of LogoTe ...
Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm Ziruu8vxy Rising area 2,400mm Angle in bend 45° Feed height: 300mm Discharge height 2,000mm Total conveyor belt length measured on the floor: 4,200mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm 25 pcs T-40 cleats - 396mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm ONLY AS LONG AS STOCKS LAST All our prices are net prices plus VAT. - can a ...
Aluminium angled conveyor belt incl. substructure horizontal area 1,500mm Rising area 2,100mm Angle in bend 35° Feed height: 200mm Discharge height 1,500mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm Centrally welded T-40 cleats - approx. 400mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm Accessories: Design for the suspension of the overbelt magnetic separator Permanent Overbelt Magnetic Separator TYPE PEM1200 1200 x 550 x 200mm = 4x eyebolt for suspension Drive roller + deflection roller S235 steel welded and machined Ø150x300 ...
Aluminium angular conveyor belt with substructure incl. adjustable feet as well as machine feet for levelling horizontal area: 2,500mm Rising Area: 800mm Angle of inclination in bend: 40° Conveyor belt total length: 3,100mm Discharge height: 700mm Height of horizontal: 320mm PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Propulsion: Motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz IP54 protection Drive etc. ready for connection, motor 2 pcs. scalloped edges 80x45mm 2-ply particularly transversely stable Usable width 370mm
Transnorm conveyor belt GF 13900-900-800RA2211Technical data:Conveyor length (NL): 13900 mm frame width (NB): 900 mm, 1000 mm with motorbelt width (GuB): 800 mmOverall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally availableConveying speed (v m/s): please contactDrive: SEW gear motor, R27 DRE80M4/MM15/LNElectrical data: 50Hz V380-500, kW 1,1 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 2014condition: good (used)Conveying length in mm: 13900Nominal / outside width in mm: 900Belt width in mm: 800Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit SpannstationKW: 1,1/S1scope of delivery: without sup ...
Transnorm conveyor belt GF 26000-1100-1000RA2289Technical data:Conveyor length (NL): 26000 mm frame width (NB): 1100 mm, 1200 mm with motorbelt width (GuB): 1000 mmOverall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally availableConveying speed (v m/s): 0,2Drive: SEW gear motor, R63DT100LS4THElectrical data: 50Hz V380-500, kW 2,2 S1Drive drum: Ø = 81 mmBelt return roller: Ø = 81 mmOptionally available:SupportsSide guide on one side and on both sidesFrequency converter for stepless speed changeAdjust length (longer/shorter)Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, GermanyFeatures: Construction year: 1998condition: good (used)Conveying length in mm: 26000Nominal / outside width in mm: 1100Belt width in mm: 1000Driven: YESEngine type: SEW Eurodrive Zentralantrieb mit SpannstationKW: 2,2Conveyor speed m / s: 0,2scope of delivery: ...
Stockpile conveyor 21 m Belt width 650 mm troughed Manufacturer: Polxmair Frame made of square tubing Drive 2.2 KW Can be dismantled, everything is screwed Camp Saxony-Anhalt Price ex farm
Dr. Sonntag
